blob: 0b77a1d963ddd2372a0725037185305d4c7ec20f [file] [log] [blame]
*** Settings ***
Documentation Test Error logging.
Resource ../lib/connection_client.robot
Resource ../lib/openbmc_ffdc.robot
Resource ../lib/utils.robot
Resource ../lib/state_manager.robot
Resource ../lib/ipmi_client.robot
Resource ../lib/boot_utils.robot
Suite Setup Run Keywords Verify logging-test AND
... Delete Error Logs And Verify
Test Setup Open Connection And Log In
Test Teardown Post Test Case Execution
Suite Teardown Delete Error Logs And Verify
*** Variables ***
${stack_mode} skip
*** Test Cases ***
Error Log Check After BMC Reboot
[Documentation] Check error log after BMC rebooted.
[Tags] Error_Log_Check_At_BMC_Ready
# 1. Power off.
# 2. Delete error logs.
# 3. Reboot BMC.
# 4. Check if eror log exists.
REST Power Off
Delete Error Logs And Verify
OBMC Reboot(off)
Error Logs Should Not Exist
Error Log Check After Host Poweron
[Documentation] Check error log after host has booted.
[Tags] Error_Log_Check_At_Host_Booted
# 1. Delete error logs
# 1. Power on.
# 3. Check if eror log exists.
Delete Error Logs And Verify
REST Power On
Error Logs Should Not Exist
Create Test Error And Verify
[Documentation] Create error logs and verify via REST.
[Tags] Create_Test_Error_And_Verify
Create Test Error Log
Verify Test Error Log
Test Error Persistency On Restart
[Documentation] Restart logging service and verify error logs.
[Tags] Test_Error_Persistency_On_Restart
Create Test Error Log
Verify Test Error Log
Execute Command On BMC
... systemctl restart xyz.openbmc_project.Logging.service
Sleep 10s reason=Wait for logging service to restart properly.
Verify Test Error Log
Test Error Entry Numbering Reset On Restart
[Documentation] Restarts logging service and verify error logs entry start
... from entry "Id" 1.
# 1. Create error log.
# 2. Verify error log.
# 3. Delete error log.
# 4. Restart logging service.
# 5. Create error log.
# 6. Verify new error log entry starts with Id entry 1.
[Tags] Test_Error_Entry_Numbering_Reset_On_Restart
# Example Error logs:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "STRING=FOO"
# ],
# "Id": 1, <--- Entry value should be 1.
# "Message": "example.xyz.openbmc_project.Example.Elog.AutoTestSimple",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1490818990051,
# "associations": []
# },
Create Test Error Log
Verify Test Error Log
Delete Error Logs
Execute Command On BMC
... systemctl restart xyz.openbmc_project.Logging.service
Sleep 10s reason=Wait for logging service to restart properly.
Create Test Error Log
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${entry_id}= Read Attribute ${elog_entry[0]} Id
Should Be Equal ${entry_id} ${1}
Test Error Persistency On Reboot
[Documentation] Reboot BMC and verify error logs.
[Tags] Test_Error_Persistency_On_Reboot
Create Test Error Log
Verify Test Error Log
Initiate BMC Reboot
Wait Until Keyword Succeeds 10 min 10 sec
... Is BMC Ready
Verify Test Error Log
Create Test Error And Verify Resolved Field
[Documentation] Create error log and verify "Resolved"
... field is 0.
[Tags] Create_Test_Error_And_Verify_Resolved_Field
# Example Error log:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "STRING=FOO"
# ],
# "Id": 1,
# "Message": "example.xyz.openbmc_project.Example.Elog.AutoTestSimple",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1490817164983,
# "associations": []
# },
# It's work in progress, but it's mnfg need. To mark an error as
# resolved, without deleting the error, mfg will set this bool
# property.
# In this test context we are making sure "Resolved" field is "0"
# by default.
Delete Error Logs
Create Test Error Log
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${resolved}= Read Attribute ${elog_entry[0]} Resolved
Should Be True ${resolved} == 0
Create Test Errors And Verify Time Stamp
[Documentation] Create error logs and verify time stamp.
[Tags] Create_Test_Error_And_Verify_Time_Stamp
# Example Error logs:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "STRING=FOO"
# ],
# "Id": 1,
# "Message": "example.xyz.openbmc_project.Example.Elog.AutoTestSimple",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1490818990051, <--- Time stamp
# "associations": []
# },
# "/xyz/openbmc_project/logging/entry/2": {
# "AdditionalData": [
# "STRING=FOO"
# ],
# "Id": 2,
# "Message": "example.xyz.openbmc_project.Example.Elog.AutoTestSimple",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1490818992116, <---- Time stamp
# "associations": []
# },
Delete Error Logs
Create Test Error Log
Create Test Error Log
# The error log generated is associated with the epoc time and unique
# for every error and in increasing time stamp.
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${time_stamp1}= Read Attribute ${elog_entry[0]} Timestamp
${time_stamp2}= Read Attribute ${elog_entry[1]} Timestamp
Should Be True ${time_stamp2} > ${time_stamp1}
Create Test Error Log And Delete
[Documentation] Create an error log and delete it.
[Tags] Create_Test_Error_Log_And_Delete
Delete Error Logs And Verify
Create Test Error Log
Delete Error Logs And Verify
Create Multiple Test Error Logs And Delete All
[Documentation] Create multiple error logs and delete all.
[Tags] Create_Multiple_Test_Error_Logs_And_Delete_All
Delete Error Logs And Verify
Create Test Error Log
Create Test Error Log
Create Test Error Log
Delete Error Logs And Verify
Create Two Test Error Logs And Delete One
[Documentation] Create two error logs and delete the first entry.
[Tags] Create_Two_Test_Error_Logs_And_Delete_One
Delete Error Logs And Verify
Create Test Error Log
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
Create Test Error Log
Delete Error log Entry ${elog_entry[0]}
${resp}= OpenBMC Get Request ${elog_entry[0]}
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Verify IPMI SEL Version
[Documentation] Verify IPMI SEL's version info.
[Tags] Verify_IPMI_SEL_Version
${version_info}= Get IPMI SEL Setting Version
${setting_status}= Fetch From Left ${version_info} (
${setting_status}= Evaluate $setting_status.replace(' ','')
Should Be True ${setting_status} >= 1.5
Should Contain ${version_info} v2 compliant case_insensitive=True
Verify Watchdog Timedout Error
[Documentation] Trigger watchdog timed out and verify errorlog generated.
[Tags] Verify_Watchdog_Timedout_Error
# Clear errors if there are any.
Delete Error Logs
Initiate Host Boot
# Check if the watchdog interface is created.
Wait Until Keyword Succeeds 3 min 10 sec
... Read Properties /xyz/openbmc_project/watchdog/host0
Trigger Host Watchdog Error
Verify Watchdog Errorlog Content
Verify IPMI SEL Delete
[Documentation] Verify IPMI SEL delete operation.
[Tags] Verify_IPMI_SEL_Delete
Delete Error Logs And Verify
Create Test Error Log
${sel_list}= Run IPMI Standard Command sel list
# Example of SEL List:
# 4 | 04/21/2017 | 10:51:16 | System Event #0x01 | Undetermined system hardware failure | Asserted
${sel_entry}= Fetch from Left ${sel_list} |
${sel_entry}= Evaluate $sel_entry.replace(' ','')
${sel_entry}= Convert To Integer 0x${sel_entry}
${sel_delete}= Run IPMI Standard Command sel delete ${sel_entry}
Should Be Equal As Strings ${sel_delete} Deleted entry ${sel_entry}
... case_insensitive=True
${sel_list}= Run IPMI Standard Command sel list
Should Be Equal As Strings ${sel_list} SEL has no entries
... case_insensitive=True
Verify Empty SEL
[Documentation] Verify empty SEL list.
[Tags] Verify_Empty_SEL
Delete Error Logs And Verify
${resp}= Run IPMI Standard Command sel list
Should Contain ${resp} SEL has no entries case_insensitive=True
Delete Non Existing SEL Entry
[Documentation] Delete non existing SEL entry.
[Tags] Delete_Non_Existing_SEL_Entry
Delete Error Logs And Verify
${sel_delete}= Run Keyword And Expect Error *
... Run IPMI Standard Command sel delete 100
Should Contain ${sel_delete} Unable to delete entry
... case_insensitive=True
Delete Invalid SEL Entry
[Documentation] Delete invalid SEL entry.
[Tags] Delete_Invalid_SEL_Entry
${sel_delete}= Run Keyword And Expect Error *
... Run IPMI Standard Command sel delete abc
Should Contain ${sel_delete} Given SEL ID 'abc' is invalid
... case_insensitive=True
Verify IPMI SEL Entries
[Documentation] Verify IPMI SEL's entries info.
[Tags] Verify_IPMI_SEL_Entries
Delete Error Logs And Verify
# Generate error logs of random count.
${count}= Evaluate random.randint(1, 5) modules=random
Repeat Keyword ${count} Create Test Error Log
${sel_entries_count}= Get IPMI SEL Setting Entries
Should Be Equal As Strings ${sel_entries_count} ${count}
Verify IPMI SEL Last Add Time
[Documentation] Verify IPMI SEL's last added timestamp.
[Tags] Verify_IPMI_SEL_Last_Add_Time
Create Test Error Log
${sel_time}= Run IPMI Standard Command sel time get
${sel_time}= Convert Date ${sel_time}
... date_format=%m/%d/%Y %H:%M:%S exclude_millis=True
${sel_last_add_time}= Get IPMI SEL Setting Last Add Time
${sel_last_add_time}= Convert Date ${sel_last_add_time}
... date_format=%m/%d/%Y %H:%M:%S exclude_millis=True
${time-diff}=
... Subtract Date From Date ${sel_last_add_time} ${sel_time}
# Verify if the delay in current time check and last add SEL time
# is less or equals to 2 seconds.
Should Be True ${time-diff} <= 2
Verify Error Logs Capping
[Documentation] Verify error logs capping.
[Tags] Verify_Error_Logs_Capping
Delete Error Logs And Verify
${cmd}= Set Variable
... for i in {1..101}; do logging-test -c AutoTestSimple;done
Execute Command On BMC ${cmd}
${count}= Count Error Entries
Run Keyword If ${count} > 100
... Fail Error logs created exceeded max capacity 100.
*** Keywords ***
Get IPMI SEL Setting
[Documentation] Returns status for given IPMI SEL setting.
[Arguments] ${setting}
# Description of argument(s):
# setting SEL setting which needs to be read(e.g. "Last Add Time").
${resp}= Run IPMI Standard Command sel info
${setting_line}= Get Lines Containing String ${resp} ${setting}
... case-insensitive
${setting_status}= Fetch From Right ${setting_line} :${SPACE}
[Return] ${setting_status}
Verify Watchdog Errorlog Content
[Documentation] Verify watchdog errorlog content.
# Example:
# "/xyz/openbmc_project/logging/entry/1":
# {
# "AdditionalData": [],
# "Id": 1,
# "Message": "org.open_power.Host.Error.WatchdogTimedOut",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Informational",
# "Timestamp": 1492715244828,
# "associations": []
# },
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${elog}= Read Properties ${elog_entry[0]}
Should Be Equal As Strings
... ${elog["Message"]} org.open_power.Host.Error.WatchdogTimedOut
Should Not Be Equal As Strings
... ${elog["Severity"]} xyz.openbmc_project.Logging.Entry.Level.Informational
Verify logging-test
[Documentation] Verify existence of prerequisite logging-test.
Open Connection And Log In
${out} ${stderr}= Execute Command which logging-test return_stderr=True
Should Be Empty ${stderr}
Should Contain ${out} logging-test
Clear Existing Error Logs
[Documentation] If error log isn't empty, reboot the BMC to clear the log.
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}${1}
Return From Keyword If ${resp.status_code} == ${HTTP_NOT_FOUND}
Initiate BMC Reboot
Wait Until Keyword Succeeds 10 min 10 sec
... Is BMC Ready
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}${1}
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Create Test Error Log
[Documentation] Generate test error log.
# Test error log entry example:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "STRING=FOO"
# ],
# "Id": 1,
# "Message": "example.xyz.openbmc_project.Example.Elog.AutoTestSimple",
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1487743963328,
# "associations": []
# }
Execute Command On BMC logging-test -c AutoTestSimple
Count Error Entries
[Documentation] Count Error entries.
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
${jsondata}= To JSON ${resp.content}
${count}= Get Length ${jsondata["data"]}
[Return] ${count}
Verify Test Error Log
[Documentation] Verify test error log entries.
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${entry_id}= Read Attribute ${elog_entry[0]} Message
Should Be Equal ${entry_id}
... example.xyz.openbmc_project.Example.Elog.AutoTestSimple
${entry_id}= Read Attribute ${elog_entry[0]} Severity
Should Be Equal ${entry_id}
... xyz.openbmc_project.Logging.Entry.Level.Error
Delete Error Logs And Verify
[Documentation] Delete all error logs and verify.
Delete Error Logs
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}/list
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Post Test Case Execution
[Documentation] Do the post test teardown.
# 1. Capture FFDC on test failure.
# 2. Delete error logs.
# 3. Close all open SSH connections.
# 4. Clear all REST sessions.
FFDC On Test Case Fail
Delete Error Logs
Close All Connections