| *** Settings *** |
| Documentation Test setting VLAN and its configuration. |
| |
| |
| Resource ../lib/rest_client.robot |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/utils.robot |
| Resource ../lib/common_utils.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/bmc_network_utils.robot |
| Resource ../lib/state_manager.robot |
| Library ../lib/utilities.py |
| Library ../lib/ipmi_utils.py |
| Library ../lib/var_funcs.py |
| Library ../lib/func_args.py |
| Library Collections |
| |
| Suite Teardown Suite Teardown Execution |
| |
| Force Tags VLAN_Network |
| |
| *** Variables *** |
| |
| ${vlan_id} ${53} |
| @{vlan_ids} ${35} ${55} |
| ${invalid_vlan_id} abc |
| ${vlan_resource} ${NETWORK_MANAGER}action/VLAN |
| ${network_resource} xyz.openbmc_project.Network.IP.Protocol.IPv4 |
| ${static_network_resource} xyz.openbmc_project.Network.IP.AddressOrigin.Static |
| ${ip} 10.6.6.10 |
| @{ip_addresses} 10.5.5.10 10.4.5.7 |
| ${netmask} ${24} |
| ${gateway} 0.0.0.0 |
| ${initial_vlan_config} @{EMPTY} |
| |
| |
| *** Test Cases *** |
| |
| Add VLAN Via REST And Verify |
| [Documentation] Add VLAN via REST and verify it via REST and IPMI. |
| [Tags] Add_VLAN_Via_REST_And_Verify |
| [Setup] Test Setup Execution |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| Create VLAN ${vlan_id} |
| Verify Existence Of VLAN ${vlan_id} |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['802.1q VLAN ID'] ["${vlan_id}"] |
| |
| |
| Add Invalid VLAN Via REST And Verify |
| [Documentation] Add Invalid VLAN via REST and verify. |
| [Tags] Add_Invalid_VLAN_Via_REST_And_Verify |
| |
| Create VLAN ${invalid_vlan_id} expected_result=error |
| |
| |
| Delete VLAN Via REST |
| [Documentation] Delete VLAN via REST and verify it via REST and IPMI. |
| [Tags] Delete_VLAN_Via_REST |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| |
| Verify Existence Of VLAN ${vlan_id} |
| Delete VLANs [${vlan_id}] |
| Verify Existence Of VLAN ${vlan_id} expected_result=error |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['802.1q VLAN ID'] ["Disabled"] |
| |
| |
| Configure Network Settings On VLAN Via REST |
| [Documentation] Configure IP on VLAN and verify it via REST and IPMI. |
| [Tags] Configure_Network_Settings_On_VLAN_Via_REST |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| Get VLAN URI For IP ${vlan_id} ${ip} |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip}"] |
| |
| |
| Delete IP On VLAN Via REST |
| [Documentation] Delete IP on VLAN and verify it via REST and IPMI. |
| [Tags] Delete_IP_On_VLAN_Via_REST |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip}"] |
| |
| ${vlan_ip_uri}= Get VLAN URI For IP ${vlan_id} ${ip} |
| Delete IP And Object ${ip} ${vlan_ip_uri} |
| |
| Get VLAN URI For IP ${vlan_id} ${ip} expected_result=error |
| |
| ${lan_config}= Get LAN Print Dict |
| Should Not Match ${lan_config['IP Address']} ${ip} |
| |
| |
| Delete VLAN When IP Is Configured Via REST |
| [Documentation] Delete IP on VLAN and verify using IPMI. |
| [Tags] Delete_VLAN_When_IP_Is_Configured_Via_REST |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip}"] |
| Delete VLANs [${vlan_id}] |
| |
| Verify Existence Of VLAN ${vlan_id} expected_result=error |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['802.1q VLAN ID'] ["Disabled"] |
| |
| |
| Configure VLAN And Check Persistency On Reboot |
| [Documentation] Create VLAN ID & IP , reboot and verify. |
| [Tags] Configure_VLAN_And_Check_Persistency_On_Reboot |
| [Setup] Test Setup Execution |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| Create VLAN ${vlan_id} |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip}"] |
| Valid Value lan_config['802.1q VLAN ID'] ["${vlan_id}"] |
| |
| Initiate BMC Reboot |
| |
| Verify Existence Of VLAN ${vlan_id} |
| Get VLAN URI For IP ${vlan_id} ${ip} |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip}"] |
| Valid Value lan_config['802.1q VLAN ID'] ["${vlan_id}"] |
| |
| |
| Add Multiple VLANs Via REST And Verify |
| [Documentation] Add multiple VLANs via REST and verify them via CLI. |
| [Tags] Add_Multiple_VLANs_Via_REST_And_Verify |
| [Setup] Test Setup Execution |
| [Teardown] Delete VLANs ${vlan_ids} |
| |
| FOR ${vlan_id} IN @{vlan_ids} |
| Create VLAN ${vlan_id} |
| Verify Existence Of VLAN ${vlan_id} |
| END |
| |
| ${lan_config}= Get LAN Print Dict |
| ${vlan_id_ipmi}= Convert To Integer ${lan_config["802.1q VLAN ID"]} |
| Valid List vlan_ids required_values=[${vlan_id_ipmi}] |
| |
| Delete Multiple IPs On VLAN And Verify |
| [Documentation] Delete multiple IPs on VLAN and verify each via REST and IPMI. |
| [Tags] Delete_Multiple_IPs_On_VLAN_And_Verify |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| FOR ${ip} IN @{ip_addresses} |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| ${vlan_ip_uri}= Get VLAN URI For IP ${vlan_id} ${ip} |
| Delete IP And Object ${ip} ${vlan_ip_uri} |
| |
| Get VLAN URI For IP ${vlan_id} ${ip} expected_result=error |
| |
| ${lan_config}= Get LAN Print Dict |
| Should Not Match ${lan_config['IP Address']} ${ip} |
| END |
| |
| Delete Multiple VLANs Via REST |
| [Documentation] Delete multiple VLANs via REST and verify each via REST and IPMI. |
| [Tags] Delete_Multiple_VLANs_Via_REST |
| [Setup] Test Setup Execution |
| |
| FOR ${vlan_id} IN @{vlan_ids} |
| Create VLAN ${vlan_id} |
| END |
| |
| Delete VLANs ${vlan_ids} |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['802.1q VLAN ID'] ["Disabled"] |
| |
| Configure Multiple IPs On VLAN Via REST |
| [Documentation] Configure Multiple IPs on VLAN and verify each via REST. |
| [Tags] Configure_Multiple_IPs_On_VLAN_Via_REST |
| [Setup] Run Keywords Test Setup Execution AND Create VLAN ${vlan_id} |
| [Teardown] Delete VLANs [${vlan_id}] |
| |
| FOR ${ip} IN @{ip_addresses} |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| END |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['IP Address'] ["${ip_addresses[0]}"] |
| |
| |
| Create And Delete VLAN And IP On It Multiple Times With BMC Reboot |
| [Documentation] Create and delete VLAN and IP on it multiple times with BMC reboot. |
| [Tags] Create_And_Delete_VLAN_And_IP_On_It_Multiple_Times_With_BMC_Reboot |
| [Setup] Test Setup Execution |
| |
| FOR ${i} IN RANGE ${5} |
| Create VLAN ${vlan_id} |
| Verify Existence Of VLAN ${vlan_id} |
| Configure Network Settings On VLAN ${vlan_id} ${ip} ${netmask} |
| ${vlan_ip_uri}= Get VLAN URI For IP ${vlan_id} ${ip} |
| Delete IP And Object ${ip} ${vlan_ip_uri} |
| Get VLAN URI For IP ${vlan_id} ${ip} expected_result=error |
| Delete VLANs [${vlan_id}] |
| Verify Existence Of VLAN ${vlan_id} expected_result=error |
| Initiate BMC Reboot |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| Verify Existence Of VLAN ${vlan_id} expected_result=error |
| END |
| |
| ${lan_config}= Get LAN Print Dict |
| Valid Value lan_config['802.1q VLAN ID'] ["Disabled"] |
| |
| |
| *** Keywords *** |
| |
| |
| Test Setup Execution |
| [Documentation] Check and delete all previously created VLAN if any. |
| |
| Printn |
| ${lan_config}= Get LAN Print Dict |
| Return From Keyword If '${lan_config['802.1q VLAN ID']}' == 'Disabled' |
| |
| # Get all VLAN ID on interface eth0. |
| ${vlan_ids}= Get VLAN IDs |
| |
| ${initial_vlan_config}= Create List |
| Set Suite Variable ${initial_vlan_config} |
| |
| FOR ${vlan_id} IN @{vlan_ids} |
| ${vlan_records}= Read Properties |
| ... ${NETWORK_MANAGER}eth0_${vlan_id}${/}enumerate quiet=1 |
| ${vlan_record}= Filter Struct |
| ... ${vlan_records} [('Origin', '${static_network_resource}')] |
| |
| ${id}= Convert To Integer ${vlan_id} |
| Set Initial VLAN Config ${vlan_record} ${id} |
| END |
| Rprint Vars initial_vlan_config |
| |
| Delete VLANs ${vlan_ids} |
| |
| |
| Set Initial VLAN Config |
| [Documentation] Set suite level list of Initial VLAN Config. |
| [Arguments] ${vlan_record} ${id} |
| |
| # Description of argument(s): |
| # vlan_record Dictionary of IP configuration information of a VLAN. |
| # Example: |
| # /xyz/openbmc_project/network/eth0_55/ipv4/5fb2cfe6": { |
| # "Address": "x.x.x.x", |
| # "Gateway": "", |
| # "Origin": "xyz.openbmc_project.Network.IP.AddressOrigin.Static", |
| # "PrefixLength": 16, |
| # "Type": "xyz.openbmc_project.Network.IP.Protocol.IPv4"} |
| # |
| # id The VLAN ID corresponding to the IP Configuration records contained |
| # in the variable "vlan_record". |
| |
| ${uris}= Get Dictionary Keys ${vlan_record} |
| |
| FOR ${uri} IN @{uris} |
| Append To List ${initial_vlan_config} ${id} ${vlan_record['${uri}']['Address']} |
| ... ${vlan_record['${uri}']['PrefixLength']} |
| END |
| |
| Run Keyword If @{uris} == @{EMPTY} |
| ... Append To List ${initial_vlan_config} ${id} ${EMPTY} ${EMPTY} |
| |
| |
| Suite Teardown Execution |
| [Documentation] Restore VLAN configuration. |
| |
| ${length}= Get Length ${initial_vlan_config} |
| Return From Keyword If ${length} == ${0} |
| |
| ${previous_id}= Set Variable ${EMPTY} |
| FOR ${index} IN RANGE 0 ${length} 3 |
| |
| Run Keyword If '${initial_vlan_config[${index+1}]}' == '${EMPTY}' |
| ... Create VLAN ${initial_vlan_config[${index}]} |
| ... ELSE IF '${previous_id}' == '${initial_vlan_config[${index}]}' |
| ... Configure Network Settings On VLAN ${initial_vlan_config[${index}]} |
| ... ${initial_vlan_config[${index+1}]} ${initial_vlan_config[${index+2}]} |
| ... ELSE Run Keywords Create VLAN ${initial_vlan_config[${index}]} AND |
| ... Configure Network Settings On VLAN ${initial_vlan_config[${index}]} |
| ... ${initial_vlan_config[${index+1}]} ${initial_vlan_config[${index+2}]} |
| |
| ${previous_id}= Set Variable ${initial_vlan_config[${index}]} |
| END |
| |
| |
| Delete VLANs |
| [Documentation] Delete one or more VLANs. |
| [Arguments] ${ids} ${interface}=eth0 |
| |
| # Description of argument(s): |
| # ids A list of VLAN IDs (e.g. ['53'] or ['53', '35', '12']). Note that the |
| # caller may simply pass a list variable or he/she may specify a |
| # python-like list specification (see examples below). |
| # interface The physical interface for the VLAN (e.g. 'eth0'). |
| |
| # Example calls: |
| # Delete VLANs ${vlan_ids} |
| # Delete Vlans [53, 35] |
| |
| # Allow for python-like list specifications (e.g. ids=['53']). |
| ${vlan_ids}= Source To Object ${ids} |
| |
| FOR ${id} IN @{vlan_ids} |
| OpenBMC Delete Request ${NETWORK_MANAGER}${interface}_${id} |
| END |
| Run Key U Sleep \ ${NETWORK_TIMEOUT}s |
| |
| |
| Get VLAN IDs |
| [Documentation] Return all VLAN IDs. |
| |
| ${vlan_ids} ${stderr} ${rc}= BMC Execute Command |
| ... /sbin/ip addr | grep @eth0 | cut -f1 -d@ | cut -f2 -d. |
| ${vlan_ids}= Split String ${vlan_ids} |
| |
| [Return] @{vlan_ids} |
| |
| |
| Get VLAN URI For IP |
| [Documentation] Get and return the URI for a VLAN IP. |
| [Arguments] ${vlan_id} ${vlan_ip} ${expected_result}=valid |
| |
| # Description of argument(s): |
| # vlan_id The VLAN ID (e.g. '53'). |
| # vlan_ip The VLAN IP (e.g. 'x.x.x.x'). |
| |
| ${vlan_records}= Read Properties |
| ... ${NETWORK_MANAGER}eth0_${vlan_id}${/}enumerate quiet=1 |
| ${vlan_record}= Filter Struct ${vlan_records} [('Address', '${vlan_ip}')] |
| ${num_vlan_records}= Get Length ${vlan_record} |
| ${status}= Run Keyword And Return Status Should Be True ${num_vlan_records} > 0 |
| ... msg=Could not find a uri for vlan "${vlan_id}" with IP "${vlan_ip}". |
| |
| Run Keyword If '${expected_result}' == 'valid' |
| ... Should Be Equal ${status} ${True} |
| ... msg=VLAN IP URI doesn't exist!. |
| ... ELSE |
| ... Should Be Equal ${status} ${False} |
| ... msg=VLAN IP URI exists!. |
| ${uris}= Get Dictionary Keys ${vlan_record} |
| Return From Keyword If @{uris} == @{EMPTY} |
| |
| [Return] ${uris[${0}]} |
| |
| |
| Verify Existence Of VLAN |
| [Documentation] Verify VLAN ID exists. |
| [Arguments] ${id} ${interface}=eth0 ${expected_result}=valid |
| |
| # Description of argument(s): |
| # id The VLAN ID (e.g. id:'53'). |
| # interface Physical Interface on which the VLAN is defined. |
| # expected_result Expected status to check existence or non-existence of VLAN. |
| |
| ${vlan_ids}= Get VLAN IDs |
| ${cli_status}= Run Keyword And Return Status |
| ... Valid List vlan_ids required_values=['${id}'] |
| |
| ${network_records}= Read Properties ${NETWORK_MANAGER} |
| ${rest_status}= Run Keyword And Return Status Valid List network_records |
| ... required_values=['${NETWORK_MANAGER}${interface}_${id}'] |
| |
| Should Be Equal ${rest_status} ${cli_status} |
| ... msg=REST and CLI Output are not the same. |
| Run Keyword If '${expected_result}' == 'valid' |
| ... Should Be Equal ${rest_status} ${True} |
| ... msg=VLAN ID doesn't exist!. |
| ... ELSE |
| ... Should Be Equal ${rest_status} ${False} |
| ... msg=VLAN ID exists!. |