| *** Settings *** |
| Documentation This module provides one wrapper keyword for each kind of boot |
| ... test supported by obmc_boot_test.py. |
| |
| Resource ../extended/obmc_boot_test_resource.robot |
| |
| *** Keywords *** |
| REST Power On |
| [Documentation] Do "REST Power On" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Power On |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Redfish Power On |
| [Documentation] Do "Redfish Power On" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Redfish Power On |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Power On |
| [Documentation] Do "IPMI Power On" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power On |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| REST Power Off |
| [Documentation] Do "REST Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Redfish Power Off |
| [Documentation] Do "Redfish Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Redfish Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| REST Hard Power Off |
| [Documentation] Do "REST Hard Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=REST Hard Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Redfish Hard Power Off |
| [Documentation] Do "Redfish Hard Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=Redfish Hard Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Power Off |
| [Documentation] Do "IPMI Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Power Soft |
| [Documentation] Do "IPMI Power Soft" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Soft |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Host Power Off |
| [Documentation] Do "Host Power Off" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Host Power Off |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| APOR |
| [Documentation] Do "APOR" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=APOR |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| OBMC Reboot (run) |
| [Documentation] Do "OBMC Reboot (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=OBMC Reboot (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| REST OBMC Reboot (run) |
| [Documentation] Do "REST OBMC Reboot (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=REST OBMC Reboot (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Redfish OBMC Reboot (run) |
| [Documentation] Do "Redfish OBMC Reboot (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=Redfish OBMC Reboot (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| OBMC Reboot (off) |
| [Documentation] Do "OBMC Reboot (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=OBMC Reboot (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| REST OBMC Reboot (off) |
| [Documentation] Do "REST OBMC Reboot (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=REST OBMC Reboot (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Redfish OBMC Reboot (off) |
| [Documentation] Do "Redfish OBMC Reboot (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=Redfish OBMC Reboot (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| PDU AC Cycle (run) |
| [Documentation] Do "PDU AC Cycle (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=PDU AC Cycle (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| PDU AC Cycle (off) |
| [Documentation] Do "PDU AC Cycle (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=PDU AC Cycle (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI MC Reset Warm (run) |
| [Documentation] Do "IPMI MC Reset Warm (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI MC Reset Warm (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI MC Reset Warm (off) |
| [Documentation] Do "IPMI MC Reset Warm (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI MC Reset Warm (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI MC Reset Cold (run) |
| [Documentation] Do "IPMI MC Reset Cold (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI MC Reset Cold (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI MC Reset Cold (off) |
| [Documentation] Do "IPMI MC Reset Cold (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI MC Reset Cold (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Std MC Reset Warm (run) |
| [Documentation] Do "IPMI Std MC Reset Warm (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI Std MC Reset Warm (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Std MC Reset Warm (off) |
| [Documentation] Do "IPMI Std MC Reset Warm (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI Std MC Reset Warm (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Std MC Reset Cold (run) |
| [Documentation] Do "IPMI Std MC Reset Cold (run)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI Std MC Reset Cold (run) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Std MC Reset Cold (off) |
| [Documentation] Do "IPMI Std MC Reset Cold (off)" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=IPMI Std MC Reset Cold (off) |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Power Cycle |
| [Documentation] Do "IPMI Power Cycle" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Cycle |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| IPMI Power Reset |
| [Documentation] Do "IPMI Power Reset" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=IPMI Power Reset |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Auto Reboot |
| [Documentation] Do "Auto Reboot" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Auto Reboot |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Host Reboot |
| [Documentation] Do "Host Reboot" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=Host Reboot |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| RF SYS GracefulRestart |
| [Documentation] Do "RF SYS GracefulRestart" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=RF SYS GracefulRestart |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| RF SYS ForceRestart |
| [Documentation] Do "RF SYS ForceRestart" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test \ loc_boot_stack=RF SYS ForceRestart |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Tool Initd MP Reboot |
| [Documentation] Do "Initd MP reboot" boot test. |
| [Arguments] ${stack_mode}=${stack_mode} ${quiet}=${quiet} |
| |
| # Description of argument(s): |
| # stack_mode If stack_mode is set to "skip", each test |
| # specified in the boot_stack is only |
| # performed if the machine is not already in |
| # the state that would normally result from |
| # running the given boot test. Otherwise, |
| # the test is skipped. If stack_mode is set |
| # to "normal", all tests from the boot_stack |
| # are performed. "skip" mode is useful when |
| # you simply want the machine in a desired |
| # state. The default value is the global |
| # value of "${stack_mode}" |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| ${cmd_buf} Catenate OBMC Boot Test |
| ... \ loc_boot_stack=Tool Initd MP Reboot |
| ... \ loc_stack_mode=${stack_mode} \ loc_quiet=${quiet} |
| Run Key U ${cmd_buf} |
| |
| |
| Smart Power Off |
| [Documentation] Do a smart power off. |
| [Arguments] ${quiet}=${QUIET} |
| |
| # A 'Smart Power Off' consists of a 'REST Power Off' with recovery. |
| # Namely, if the 'REST Power Off' fails, a 'REST Hard Power Off' will |
| # be attempted. |
| |
| # Description of argument(s): |
| # quiet If this parameter is set to ${1}, this |
| # keyword will print only essential |
| # information. The default value is the |
| # global value of "${quiet}" |
| |
| |
| # OBMC Boot Test will restore global quiet to initial global value. |
| # Unfortunately, that restore affects our local quiet so we must |
| # preserve it. |
| ${loc_quiet}= Set Variable ${quiet} |
| ${cmd_buf}= Catenate REST Power Off \ stack_mode=skip |
| ... \ \ quiet=${loc_quiet} |
| ${status} ${ret_values}= Run Key U ${cmd_buf} ignore=${1} |
| ... quiet=${loc_quiet} |
| |
| Run Keyword If '${status}' == 'PASS' Return From Keyword |
| |
| ${cmd_buf}= Catenate REST Hard Power Off \ stack_mode=skip |
| ... \ \ quiet=${loc_quiet} |
| Run Key U ${cmd_buf} quiet=${loc_quiet} |
| |