| *** Settings *** |
| |
| Documentation VMI static/dynamic IP config tests. |
| |
| Resource ../../lib/resource.robot |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/bmc_redfish_utils.robot |
| Resource ../../lib/state_manager.robot |
| Library ../../lib/bmc_network_utils.py |
| |
| Suite Setup Suite Setup Execution |
| Test Teardown FFDC On Test Case Fail |
| Suite Teardown Redfish.Logout |
| |
| *** Variables *** |
| |
| # users User Name password |
| @{ADMIN} admin_user TestPwd123 |
| @{OPERATOR} operator_user TestPwd123 |
| @{ReadOnly} readonly_user TestPwd123 |
| @{NoAccess} noaccess_user TestPwd123 |
| &{USERS} Administrator=${ADMIN} Operator=${OPERATOR} ReadOnly=${ReadOnly} |
| ... NoAccess=${NoAccess} |
| |
| ${test_ipv4} 10.6.6.6 |
| ${test_gateway} 10.6.6.1 |
| ${test_netmask} 255.255.252.0 |
| |
| &{DHCP_ENABLED} DHCPEnabled=${${True}} |
| &{DHCP_DISABLED} DHCPEnabled=${${False}} |
| |
| &{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} |
| &{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} |
| ${wait_time} 10s |
| |
| |
| *** Test Cases *** |
| |
| Verify All VMI EthernetInterfaces |
| [Documentation] Verify all VMI ethernet interfaces. |
| [Tags] Verify_All_VMI_EthernetINterfaces |
| |
| Verify VMI EthernetInterfaces |
| |
| |
| Verify Existing VMI Network Interface Details |
| [Documentation] Verify existing VMI network interface details. |
| [Tags] Verify_VMI_Network_Interface_Details |
| |
| ${vmi_ip}= Get VMI Network Interface Details |
| ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP |
| |
| Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} |
| Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} |
| Should Be Equal As Strings ${vmi_ip["Id"]} intf0 |
| Should Be Equal As Strings ${vmi_ip["Description"]} |
| ... Ethernet Interface for Virtual Management Interface |
| Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface |
| Should Be True ${vmi_ip["InterfaceEnabled"]} |
| |
| |
| Delete Existing Static VMI IP Address |
| [Documentation] Delete existing static VMI IP address. |
| [Tags] Delete_Existing_Static_VMI_IP_Address |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} |
| |
| Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} Static ${default} ${default} |
| |
| |
| Verify User Cannot Delete ReadOnly Property IPv4Addresses |
| [Documentation] Verify user cannot delete readonly property IPv4Addresses. |
| [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} |
| |
| |
| Assign Valid And Invalid Static IPv4 Address To VMI |
| [Documentation] Assign static IPv4 address to VMI. |
| [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI |
| [Template] Set Static IPv4 Address To VMI And Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| # ip gateway netmask valid_status_code |
| 10.5.20.30 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} |
| a.3.118.94 0.0.0.0 255.255.252.0 ${HTTP_BAD_REQUEST} |
| |
| |
| Add Multiple IP Addresses On VMI Interface And Verify |
| [Documentation] Add multiple IP addresses on VMI interface and verify. |
| [Tags] Add_Multiple_IP_Addresses_On_VMI_Interface_And_Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=0.0.0.0 |
| ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=0.0.0.0 |
| ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=0.0.0.0 |
| ${ips}= Create List ${ip1} ${ip2} ${ip3} |
| |
| Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_ACCEPTED}] |
| Verify VMI Network Interface Details ${ip1["Address"]} Static ${ip1["Gateway"]} ${ip1["SubnetMask"]} |
| |
| |
| Modify IP Addresses On VMI Interface And Verify |
| [Documentation] Modify IP addresses on VMI interface and verify. |
| [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify |
| [Template] Set Static IPv4 Address To VMI And Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| # ip gateway netmask valid_status_code |
| 10.5.5.10 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} |
| 10.5.5.11 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED} |
| |
| Switch Between IP Origins On VMI And Verify Details |
| [Documentation] Switch between IP origins on VMI and verify details. |
| [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details |
| |
| Switch VMI IPv4 Origin And Verify Details |
| Switch VMI IPv4 Origin And Verify Details |
| |
| |
| Verify Persistency Of VMI IPv4 Details After Host Reboot |
| [Documentation] Verify persistency of VMI IPv4 details after host reboot. |
| [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot |
| |
| # Verifying persistency of dynamic address. |
| Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| |
| # Verifying persistency of static address. |
| Switch VMI IPv4 Origin And Verify Details |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| |
| |
| Delete VMI Static IP Address And Verify |
| [Documentation] Delete VMI static IP address and verify. |
| [Tags] Delete_VMI_Static_IP_Address_And_Verify |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Delete VMI IPv4 Address |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Empty ${resp.dict["IPv4Addresses"]} |
| |
| |
| Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete |
| [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. |
| [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete |
| [Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| |
| ${session_info}= Get Redfish Session Info |
| Redfish.Delete ${session_info["location"]} |
| |
| # Create a new Redfish session |
| Redfish Power Off |
| Redfish Power On |
| |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| |
| Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots |
| [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots |
| [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots |
| [Teardown] Test Teardown Execution |
| |
| Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${vmi_ip_config}= Get VMI Network Interface Details |
| # Verifying persistency of dynamic address after multiple reboots. |
| FOR ${i} IN RANGE ${2} |
| Redfish Power Off |
| Redfish Power On |
| Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} |
| ... ${vmi_ip_config["IPv4_SubnetMask"]} |
| END |
| |
| |
| Enable DHCP When Static IP Configured And Verify Static IP |
| [Documentation] Enable DHCP when static ip configured and verify static ip |
| [Tags] Enable_DHCP_when_Static_IP_Configured_And_Verify_Static_IP |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Set VMI IPv4 Origin ${True} |
| ${vmi_network_conf}= Get VMI Network Interface Details |
| Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]} |
| |
| |
| Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot |
| [Documentation] Verify VMI static IP configuration persist on BMC reset. |
| [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| OBMC Reboot (off) |
| Redfish Power On |
| # Verifying the VMI static configuration |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| Add Static IP When Host Poweroff And Verify On Poweron |
| [Documentation] Add Static IP When Host Poweroff And Verify on power on |
| [Tags] Add_Static_IP_When_Host_Poweroff_And_Verify_On_Poweron |
| [Setup] Redfish Power Off |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Redfish Power On |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| Add VMI Static IP When Host Poweroff And Verify Static IP On BMC Reset |
| [Documentation] Add Static IP When Host Poweroff And Verify Static IP On BMC Reset. |
| [Tags] Add_VMI_Static_IP_When_Host_Poweroff_And_Verify_Static_IP_On_BMC_Reset |
| [Setup] Redfish Power Off |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| OBMC Reboot (off) |
| Redfish Power On |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| Enable DHCP When No Static IP Configured And Verify DHCP IP |
| [Documentation] Enable DHCP when no static ip configured and verify dhcp ip |
| [Tags] Enable_DHCP_When_No_Static_IP_Configured_And_Verify_DHCP_IP |
| [Setup] Run Keyword And Ignore Error Delete VMI IPv4 Address |
| [Teardown] Test Teardown Execution |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${vmi_ip_config}= Get VMI Network Interface Details |
| Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]} |
| ... ${vmi_ip_config["IPv4_SubnetMask"]} |
| |
| Verify User Cannot Delete VMI DHCP IP Address |
| [Documentation] Verify user cannot delete VMI DHCP IP Address |
| [Tags] Verify_User_Cannot_Delete_VMI_DHCP_IP_Address |
| [Setup] Set VMI IPv4 Origin ${True} |
| [Teardown] Test Teardown Execution |
| |
| Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Not Be Empty ${resp.dict["IPv4Addresses"]} |
| |
| Enable DHCP When Static IP Configured DHCP Server Unavailable And Verify IP |
| [Documentation] Enable DHCP When Static IP Configured And DHCP Server Unavailable And Verify No IP. |
| [Tags] Enable_DHCP_When_Static_IP_Configured_DHCP_Server_Unavailable_And_Verify_IP |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Set VMI IPv4 Origin ${True} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| |
| |
| Verify To Configure VMI Static IP Address With Different User Roles |
| [Documentation] Verify to configure vmi static ip address with different user roles. |
| [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway nemask valid_status_code |
| admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED} |
| operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} |
| readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} |
| noaccess_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Delete VMI Static IP Address With Different User Roles |
| [Documentation] Verify to delete vmi static IP address with different user roles. |
| [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Delete VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| admin_user TestPwd123 ${HTTP_ACCEPTED} |
| operator_user TestPwd123 ${HTTP_FORBIDDEN} |
| readonly_user TestPwd123 ${HTTP_FORBIDDEN} |
| noaccess_user TestPwd123 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Update VMI Static IP Address With Different User Roles |
| [Documentation] Verify to update vmi static IP address with different user roles. |
| [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway nemask valid_status_code |
| admin_user TestPwd123 10.5.10.20 0.0.0.0 255.255.0.0 ${HTTP_ACCEPTED} |
| operator_user TestPwd123 10.5.10.30 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} |
| readonly_user TestPwd123 10.5.20.40 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} |
| noaccess_user TestPwd123 10.5.30.50 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Read VMI Network Configuration With Different User Roles |
| [Documentation] Verify to read vmi network configuration with different user roles. |
| [Tags] Verify_To_Read_VMI_Network_Configuration_Via_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Read VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| admin_user TestPwd123 ${HTTP_OK} |
| operator_user TestPwd123 ${HTTP_OK} |
| readonly_user TestPwd123 ${HTTP_OK} |
| noaccess_user TestPwd123 ${HTTP_FORBIDDEN} |
| |
| Enable DHCP On VMI Network Via Different Users Roles And Verify |
| [Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify. |
| [Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| admin_user TestPwd123 ${True} ${HTTP_ACCEPTED} |
| operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN} |
| readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN} |
| noaccess_user TestPwd123 ${True} ${HTTP_FORBIDDEN} |
| |
| Disable DHCP On VMI Network Via Different Users Roles And Verify |
| [Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify. |
| [Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| admin_user TestPwd123 ${False} ${HTTP_ACCEPTED} |
| operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN} |
| readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN} |
| noaccess_user TestPwd123 ${False} ${HTTP_FORBIDDEN} |
| |
| |
| Enable And Disable DHCP And Verify |
| [Documentation] verify enable DHCP and disable DHCP. |
| [Tags] Enabled_And_Disabled_DHCP_Verify |
| |
| Set VMI IPv4 Origin ${True} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| Set VMI IPv4 Origin ${False} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Empty ${resp.dict["IPv4Addresses"]} |
| |
| |
| Multiple Times Enable And Disable DHCP And Verify |
| [Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP |
| ... each time when DHCP is enabled |
| [Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify |
| |
| ${default}= Set Variable 0.0.0.0 |
| FOR ${i} IN RANGE ${2} |
| Set VMI IPv4 Origin ${True} |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| Set VMI IPv4 Origin ${False} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Empty ${resp.dict["IPv4Addresses"]} |
| END |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do test setup execution task. |
| |
| Redfish.Login |
| Redfish Power On |
| ${active_channel_config}= Get Active Channel Config |
| Set Suite Variable ${active_channel_config} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${ip_resp}= Evaluate json.loads('''${resp.text}''') json |
| ${length}= Get Length ${ip_resp["IPv4StaticAddresses"]} |
| ${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details |
| Set Suite Variable ${vmi_network_conf} |
| |
| |
| Test Teardown Execution |
| [Documentation] Do test teardown execution task. |
| |
| FFDC On Test Case Fail |
| ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False} |
| Run Keyword If ${vmi_network_conf} != ${None} |
| ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} |
| ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} |
| |
| |
| Get VMI Network Interface Details |
| [Documentation] Get VMI network interface details. |
| [Arguments] ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # valid_status_code Expected valid status code from GET request. |
| |
| # Note: It returns a dictionary of VMI eth0 parameters. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${ip_resp}= Evaluate json.loads('''${resp.text}''') json |
| |
| ${static_exists}= Run Keyword And Ignore Error |
| ... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]} |
| ${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False} |
| |
| ${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]} |
| ... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]} |
| ... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]} |
| ... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]} |
| ... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}} |
| ... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} |
| ... IPv4StaticAddresses=${${static_exists}} |
| |
| [Return] &{vmi_ip} |
| |
| |
| Get Immediate Child Parameter From VMI Network Interface |
| [Documentation] Get immediate child parameter from VMI network interface. |
| [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. |
| # valid_status_code Expected valid status code from GET request. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${ip_resp}= Evaluate json.loads('''${resp.text}''') json |
| ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} |
| ... ${ip_resp["DHCPv4"]["${parameter}"]} |
| |
| [Return] ${value} |
| |
| |
| Verify VMI EthernetInterfaces |
| [Documentation] Verify VMI ethernet interfaces. |
| [Arguments] ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # valid_status_code Expected valid status code from GET request. |
| |
| ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${resp}= Evaluate json.loads('''${resp.text}''') json |
| ${interfaces}= Set Variable ${resp["Members"]} |
| |
| Should Be Equal As Strings ${interfaces[0]}[@odata.id] |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 |
| Should Be Equal As Strings ${interfaces[1]}[@odata.id] |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1 |
| |
| Should Be Equal ${resp["Members@odata.count"]} ${2} |
| |
| |
| Verify VMI Network Interface Details |
| [Documentation] Verify VMI network interface details. |
| [Arguments] ${ip} ${origin} ${gateway} ${netmask} |
| ... ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ip VMI IPv4 address. |
| # origin Origin of IPv4 address eg. Static or DHCP. |
| # gateway Gateway for VMI IP. |
| # netmask Subnetmask for VMI IP. |
| # valid_status_code Expected valid status code from GET request. Default is HTTP_OK. |
| |
| ${vmi_ip}= Get VMI Network Interface Details ${valid_status_code} |
| Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} |
| Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]} |
| Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]} |
| Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]} |
| |
| |
| Set Static IPv4 Address To VMI And Verify |
| [Documentation] Set static IPv4 address to VMI. |
| [Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # ip VMI IPv4 address. |
| # gateway Gateway for VMI IP. |
| # netmask Subnetmask for VMI IP. |
| # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. |
| |
| ${data}= Set Variable |
| ... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Patch |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... body=${data} valid_status_codes=[${valid_status_code}] |
| |
| # Wait few seconds for new configuration to get populated on runtime. |
| Sleep ${wait_time} |
| |
| Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} |
| ${host_power_state} ${host_state}= Redfish Get Host State |
| Run Keyword If '${host_power_state}' == 'On' and '${host_state}' == 'Enabled' |
| ... Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} |
| |
| |
| Delete VMI IPv4 Address |
| [Documentation] Delete VMI IPv4 address. |
| [Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses. |
| # Default is IPv4StaticAddresses. |
| # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. |
| |
| ${data}= Set Variable {"${delete_param}": [${Null}]} |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Patch |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... body=${data} valid_status_codes=[${valid_status_code}] |
| |
| Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Empty ${resp.dict["IPv4StaticAddresses"]} |
| |
| |
| Set VMI IPv4 Origin |
| [Documentation] Set VMI IPv4 origin. |
| [Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False. |
| # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. |
| |
| ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} |
| ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data} |
| ... valid_status_codes=[${valid_status_code}] |
| Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} |
| |
| Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled} |
| |
| |
| Switch VMI IPv4 Origin And Verify Details |
| [Documentation] Switch VMI IPv4 origin and verify details. |
| |
| ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| ${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False} |
| |
| ${default}= Set Variable 0.0.0.0 |
| ${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static |
| Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} |
| Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} |
| |
| |
| Delete VMI Static IP Address Using Different Users |
| [Documentation] Update user role and delete vmi static IP address. |
| [Arguments] ${username} ${password} ${valid_status_code} |
| [Teardown] Run Keywords Redfish.Login AND |
| ... Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} |
| ... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # valid_status_code The expected valid status code. |
| |
| Redfish.Login ${username} ${password} |
| Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code} |
| Redfish.Logout |
| |
| |
| Config VMI Static IP Address Using Different Users |
| [Documentation] Update user role and update vmi static ip address. |
| [Arguments] ${username} ${password} ${ip} ${gateway} ${netmask} |
| ... ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # ip IP address to be added (e.g. "10.7.7.7"). |
| # subnet_mask Subnet mask for the IP to be added |
| # (e.g. "255.255.0.0"). |
| # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). |
| # valid_status_code The expected valid status code. |
| |
| Redfish.Login ${username} ${password} |
| Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code} |
| Redfish.Logout |
| |
| |
| Read VMI Static IP Address Using Different Users |
| [Documentation] Update user role and read vmi static ip address. |
| [Arguments] ${username} ${password} ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # valid_status_code The expected valid status code. |
| |
| Redfish.Login ${username} ${password} |
| Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ... valid_status_codes=[${valid_status_code}] |
| Redfish.Logout |
| |
| |
| Delete BMC Users Using Redfish |
| [Documentation] Delete BMC users via redfish. |
| |
| Redfish.Login |
| Delete BMC Users Via Redfish users=${USERS} |
| |
| Update User Role And Set VMI IPv4 Origin |
| [Documentation] Update User Role And Set VMI IPv4 Origin. |
| [Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # dhcp_enabled Indicates whether dhcp should be enabled |
| # (${True}, ${False}). |
| # valid_status_code The expected valid status code. |
| |
| Redfish.Login ${username} ${password} |
| Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code} |
| Redfish.Logout |