Split IPMI network into verification and configuration suites
Change-Id: I001f1db530973e3090f03986f9abd180b20c90a4
Signed-off-by: George Keishing <gkeishin@in.ibm.com>
diff --git a/ipmi/test_ipmi_network_verificaton.robot b/ipmi/test_ipmi_network_verificaton.robot
new file mode 100644
index 0000000..39bac45
--- /dev/null
+++ b/ipmi/test_ipmi_network_verificaton.robot
@@ -0,0 +1,146 @@
+*** Settings ***
+
+Documentation Module to test IPMI network functionality.
+Resource ../lib/ipmi_client.robot
+Resource ../lib/openbmc_ffdc.robot
+Resource ../lib/bmc_network_utils.robot
+Library ../lib/ipmi_utils.py
+Library ../lib/gen_robot_valid.py
+Library ../lib/var_funcs.py
+Library ../lib/bmc_network_utils.py
+
+Suite Setup Redfish.Login
+Test Setup Printn
+Test Teardown FFDC On Test Case Fail
+
+Force Tags IPMI_Network_Verify
+
+*** Test Cases ***
+
+Retrieve IP Address Via IPMI And Verify Using Redfish
+ [Documentation] Retrieve IP address using IPMI and verify using Redfish.
+ [Tags] Retrieve_IP_Address_Via_IPMI_And_Verify_Using_Redish
+
+ ${active_channel_config}= Get Active Channel Config
+ FOR ${channel_number} IN @{active_channel_config.keys()}
+ Verify Channel Info ${channel_number} IPv4StaticAddresses ${active_channel_config}
+ END
+
+Retrieve Default Gateway Via IPMI And Verify
+ [Documentation] Retrieve default gateway via IPMI and verify it's existence on the BMC.
+ [Tags] Retrieve_Default_Gateway_Via_IPMI_And_Verify
+
+ ${lan_print_ipmi}= Get LAN Print Dict
+
+ Verify Gateway On BMC ${lan_print_ipmi['Default Gateway IP']}
+
+
+Retrieve MAC Address Via IPMI And Verify Using Redfish
+ [Documentation] Retrieve MAC address via IPMI and verify using Redfish.
+ [Tags] Retrieve_MAC_Address_Via_IPMI_And_Verify_Using_Redfish
+
+ ${active_channel_config}= Get Active Channel Config
+ FOR ${channel_number} IN @{active_channel_config.keys()}
+ Verify Channel Info ${channel_number} MACAddress ${active_channel_config}
+ END
+
+
+Test Valid IPMI Channels Supported
+ [Documentation] Verify IPMI channels supported on a given system.
+ [Tags] Test_Valid_IPMI_Channels_Supported
+
+ ${channel_count}= Get Physical Network Interface Count
+
+ # Note: IPMI network channel logically starts from 1.
+ FOR ${channel_number} IN RANGE 1 ${channel_count}
+ Run IPMI Standard Command lan print ${channel_number}
+ END
+
+
+Test Invalid IPMI Channel Response
+ [Documentation] Verify invalid IPMI channels supported response.
+ [Tags] Test_Invalid_IPMI_Channel_Response
+
+ ${channel_count}= Get Physical Network Interface Count
+
+ # To target invalid channel, increment count.
+ ${channel_number}= Evaluate ${channel_count} + 1
+
+ # Example of invalid channel:
+ # $ ipmitool -I lanplus -H xx.xx.xx.xx -P password lan print 3
+ # Get Channel Info command failed: Parameter out of range
+ # Invalid channel: 3
+
+ ${stdout}= Run External IPMI Standard Command
+ ... lan print ${channel_number} fail_on_err=${0}
+ Should Contain ${stdout} Invalid channel
+ ... msg=IPMI channel ${channel_number} is invalid but seen working.
+
+
+Get IP Address Source And Verify Using Redfish
+ [Documentation] Get IP address source and verify it using Redfish.
+ [Tags] Get_IP_Address_Source_And_Verify_Using_Redfish
+
+ ${active_channel_config}= Get Active Channel Config
+ ${lan_config}= Get LAN Print Dict ${CHANNEL_NUMBER}
+
+ ${ipv4_addresses}= Redfish.Get Attribute
+ ... /redfish/v1/Managers/bmc/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
+ ... IPv4Addresses
+
+ FOR ${ipv4_address} IN @{ipv4_addresses}
+ ${ip_address_source}=
+ ... Set Variable if '${ipv4_address['Address']}' == '${lan_config['IP Address']}'
+ ... ${ipv4_address['AddressOrigin']} Address
+ Exit For Loop IF "${ip_address_source}" != 'None'
+ END
+
+ Valid Value lan_config['IP Address Source'] ['${ip_address_source}']
+
+
+*** Keywords ***
+
+Get Physical Network Interface Count
+ [Documentation] Return valid physical network interfaces count.
+ # Example:
+ # link/ether 22:3a:7f:70:92:cb brd ff:ff:ff:ff:ff:ff
+ # link/ether 0e:8e:0d:6b:e9:e4 brd ff:ff:ff:ff:ff:ff
+
+ ${mac_entry_list}= Get BMC MAC Address List
+ ${mac_unique_list}= Remove Duplicates ${mac_entry_list}
+ ${physical_interface_count}= Get Length ${mac_unique_list}
+
+ [Return] ${physical_interface_count}
+
+
+Verify Channel Info
+ [Documentation] Verify the channel info.
+ [Arguments] ${channel_number} ${network_parameter} ${active_channel_config}
+
+ Run Keyword If '${network_parameter}' == 'IPv4StaticAddresses'
+ ... Verify IPv4 Static Address ${channel_number} ${active_channel_config}
+ ... ELSE IF '${network_parameter}' == 'MACAddress'
+ ... Verify MAC Address ${channel_number} ${active_channel_config}
+
+
+Verify IPv4 Static Address
+ [Documentation] Verify the IPv4 Static Address.
+ [Arguments] ${channel_number} ${active_channel_config}
+
+ ${lan_print_ipmi}= Get LAN Print Dict ${channel_number}
+ ${ipv4_static_addresses}= Redfish.Get Attribute
+ ... ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']} IPv4StaticAddresses
+ ${redfish_ips}= Nested Get Address ${ipv4_static_addresses}
+ Rprint Vars lan_print_ipmi ipv4_static_addresses redfish_ips
+ Valid Value lan_print_ipmi['IP Address'] ${redfish_ips}
+
+
+Verify MAC Address
+ [Documentation] Verify the MAC Address.
+ [Arguments] ${channel_number} ${active_channel_config}
+
+ ${lan_print_ipmi}= Get LAN Print Dict ${channel_number}
+ ${redfish_mac_address}= Redfish.Get Attribute
+ ... ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']} MACAddress
+ Rprint Vars lan_print_ipmi redfish_mac_address
+ Valid Value lan_print_ipmi['MAC Address'] ['${redfish_mac_address}']