| *** Settings *** |
| Documentation BMC and host redfish utility keywords. |
| |
| Resource resource.robot |
| Resource bmc_redfish_resource.robot |
| |
| |
| *** Keywords *** |
| |
| Redfish Power Operation |
| [Documentation] Do Redfish host power operation. |
| [Arguments] ${reset_type} |
| |
| # Description of arguments: |
| # reset_type Type of power operation. |
| # (e.g. On/ForceOff/GracefulRestart/GracefulShutdown) |
| |
| # Example: |
| # "Actions": { |
| # "#ComputerSystem.Reset": { |
| # "ResetType@Redfish.AllowableValues": [ |
| # "On", |
| # "ForceOff", |
| # "ForceOn", |
| # "ForceRestart", |
| # "GracefulRestart", |
| # "GracefulShutdown" |
| # "PowerCycle", |
| # "Nmi" |
| # ], |
| # "target": "/redfish/v1/Systems/system/Actions/ComputerSystem.Reset" |
| # } |
| # } |
| |
| ${target}= redfish_utils.Get Target Actions /redfish/v1/Systems/${SYSTEM_ID}/ ComputerSystem.Reset |
| ${payload}= Create Dictionary ResetType=${reset_type} |
| ${resp}= Redfish.Post ${target} body=&{payload} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| |
| Redfish BMC Reset Operation |
| [Documentation] Do Redfish BMC reset operation. |
| [Arguments] ${reset_type}=GracefulRestart |
| |
| # Example: |
| # "Actions": { |
| # "#Manager.Reset": { |
| # "ResetType@Redfish.AllowableValues": [ |
| # "GracefulRestart", |
| # "ForceRestart" |
| # ], |
| # "target": "/redfish/v1/Managers/${MANAGER_ID}/Actions/Manager.Reset" |
| # } |
| |
| ${target}= redfish_utils.Get Target Actions /redfish/v1/Managers/${MANAGER_ID}/ Manager.Reset |
| ${payload}= Create Dictionary ResetType=${reset_type} |
| Redfish.Post ${target} body=&{payload} |
| |
| |
| Reset BIOS Via Redfish |
| [Documentation] Do BIOS reset through Redfish. |
| |
| ${target}= redfish_utils.Get Target Actions /redfish/v1/Systems/${SYSTEM_ID}/Bios/ Bios.ResetBios |
| Redfish.Post ${target} valid_status_codes=[${HTTP_OK}] |
| |
| |
| Set Redfish Delete Session Flag |
| [Documentation] Disable or enable delete redfish while performing the power operation keyword. |
| [Arguments] ${set_flag} |
| |
| # Description of argument(s): |
| # set_flag Set user specified enable(1) or disable(0). |
| |
| Set Suite Variable ${REDFISH_DELETE_SESSIONS} ${set_flag} |
| |
| |
| Redfish Delete Session |
| [Documentation] Redfish delete session. |
| [Arguments] ${session_info} |
| |
| # Description of argument(s): |
| # session_info Session information are stored in dictionary. |
| |
| # ${session_info} = { |
| # 'SessionIDs': 'XXXXXXXXX', |
| # 'ClientID': 'XXXXXX', |
| # 'SessionToken': 'XXXXXXXXX', |
| # 'SessionResp': session response from redfish login |
| # } |
| |
| # SessionIDs : Session IDs |
| # ClientID : Client ID |
| # SessionToken : Session token |
| # SessionResp : Response of creating an redfish login session |
| |
| Redfish.Delete /redfish/v1/SessionService/Sessions/${session_info["SessionIDs"]} |
| |
| |
| Redfish Delete List Of Session |
| [Documentation] Redfish delete session from list of session records, individual session information |
| ... are stored in dictionary. |
| [Arguments] ${session_info_list} |
| |
| # Description of argument(s): |
| # session_info_list List contains individual session record are stored in dictionary. |
| |
| # ${session_info_list} = [{ |
| # 'SessionIDs': 'XXXXXXXXX', |
| # 'ClientID': 'XXXXXX', |
| # 'SessionToken': 'XXXXXXXXX', |
| # 'SessionResp': session response from redfish login |
| # }] |
| |
| # SessionIDs : Session IDs |
| # ClientID : Client ID |
| # SessionToken : Session token |
| # SessionResp : Response of creating an redfish login session |
| |
| FOR ${session_record} IN @{session_info_list} |
| Redfish.Delete /redfish/v1/SessionService/Sessions/${session_record["SessionIDs"]} |
| END |
| |
| |
| Delete All Redfish Sessions |
| [Documentation] Delete all active redfish sessions. |
| |
| ${saved_session_info}= Redfish_Utils.Get Redfish Session Info |
| |
| ${resp_list}= Redfish_Utils.Get Member List |
| ... /redfish/v1/SessionService/Sessions |
| |
| # Remove the current login session from the list. |
| Remove Values From List ${resp_list} ${saved_session_info["location"]} |
| |
| # Remove session with client_id populated from the list. |
| ${client_id_list}= Get Session With Client Id ${resp_list} |
| Log To Console Client sessions skip list: ${client_id_list} |
| FOR ${client_session} IN @{client_id_list} |
| Remove Values From List ${resp_list} ${client_session} |
| END |
| |
| FOR ${session} IN @{resp_list} |
| Run Keyword And Ignore Error Redfish.Delete ${session} |
| END |
| |
| |
| Get Session With Client Id |
| [Documentation] Iterate through the active sessions and return sessions |
| ... populated with Context. |
| [Arguments] ${session_list} |
| |
| # Description of argument(s): |
| # session_list Active session list from SessionService. |
| |
| # "@odata.type": "#Session.v1_5_0.Session", |
| # "ClientOriginIPAddress": "xx.xx.xx.xx", |
| # "Context": "MYID-01" |
| |
| ${client_id_sessions}= Create List |
| FOR ${session} IN @{session_list} |
| ${resp}= Redfish.Get ${session} valid_status_codes=[200,404] |
| # This prevents dictionary KeyError exception when the Context |
| # attribute is not populated in generic session response. |
| ${context_var}= Get Variable Value ${resp.dict["Context"]} ${EMPTY} |
| # Handle backward compatibility for OEM. |
| ${oem_var}= Get Variable Value ${resp.dict["Oem"]["OpenBMC"]["ClientID"]} ${EMPTY} |
| Run Keyword If '${context_var}' != '${EMPTY}' |
| ... Append To List ${client_id_sessions} ${session} |
| Run Keyword If '${oem_var}' != '${EMPTY}' |
| ... Append To List ${client_id_sessions} ${session} |
| END |
| |
| RETURN ${client_id_sessions} |
| |
| |
| Get Valid FRUs |
| [Documentation] Return a dictionary containing all of the valid FRU records for the given fru_type. |
| [Arguments] ${fru_type} |
| |
| # NOTE: A valid FRU record will have a "State" key of "Enabled" and a "Health" key of "OK". |
| |
| # Description of argument(s): |
| # fru_type The type of fru (e.g. "Processors", "Memory", etc.). |
| |
| ${fru_records}= Redfish_Utils.Enumerate Request |
| ... /redfish/v1/Systems/${SYSTEM_ID}/${fru_type} return_json=0 |
| ${fru_records}= Filter Struct ${fru_records} [('State', 'Enabled'), ('Health', 'OK')] |
| |
| RETURN ${fru_records} |
| |
| |
| Get Num Valid FRUs |
| [Documentation] Return the number of valid FRU records for the given fru_type. |
| [Arguments] ${fru_type} |
| |
| # Description of argument(s): |
| # fru_type The type of fru (e.g. "Processors", "Memory", etc.). |
| |
| ${fru_records}= Get Valid FRUs ${fru_type} |
| ${num_valid_frus}= Get length ${fru_records} |
| |
| RETURN ${num_valid_frus} |
| |
| |
| Verify Valid Records |
| [Documentation] Verify all records retrieved with the given arguments are valid. |
| [Arguments] ${record_type} ${redfish_uri} ${reading_type} |
| |
| # Description of Argument(s): |
| # record_type The sensor record type (e.g. "PowerSupplies") |
| # redfish_uri The power supply URI (e.g. /redfish/v1/Chassis/chassis/Power) |
| # reading_type The power watt readings (e.g. "PowerInputWatts") |
| |
| # A valid record will have "State" key "Enabled" and "Health" key "OK". |
| ${records}= Redfish.Get Attribute ${redfish_uri} ${record_type} |
| |
| Rprint Vars records |
| |
| # Example output: |
| # records: |
| # [0]: |
| # [@odata.id]: /redfish/v1/Chassis/chassis/Power#/PowerControl/0 |
| # [@odata.type]: #Power.v1_0_0.PowerControl |
| # [MemberId]: 0 |
| # [Name]: Chassis Power Control |
| # [PowerConsumedWatts]: 264.0 |
| # [PowerLimit]: |
| # [LimitInWatts]: None |
| # [PowerMetrics]: |
| # [AverageConsumedWatts]: 325 |
| # [IntervalInMin]: 3 |
| # [MaxConsumedWatts]: 538 |
| # [Status]: |
| # [Health]: OK |
| # [State]: Enabled |
| |
| ${invalid_records}= Filter Struct ${records} |
| ... [('Health', '^OK$'), ('State', '^Enabled$'), ('${reading_type}', '')] regex=1 invert=1 |
| Valid Length invalid_records max_length=0 |
| |
| RETURN ${records} |
| |
| |
| Redfish Create User |
| [Documentation] Redfish create user. |
| [Arguments] ${user_name} ${password} ${role_id} ${enabled} ${force}=${False} |
| |
| # Description of argument(s): |
| # user_name The user name to be created. |
| # password The password to be assigned. |
| # role_id The role ID of the user to be created. |
| # (e.g. "Administrator", "Operator", etc.). |
| # enabled Indicates whether the username being created. |
| # should be enabled (${True}, ${False}). |
| # force Delete user account and re-create if force is True. |
| |
| ${curr_role}= Run Keyword And Ignore Error Get User Role ${user_name} |
| # Ex: ${curr_role} = ('PASS', 'Administrator') |
| |
| ${user_exists}= Run Keyword And Return Status Should Be Equal As Strings ${curr_role}[0] PASS |
| |
| # Delete user account when force is True. |
| Run Keyword If ${force} == ${True} Redfish.Delete ${REDFISH_ACCOUNTS_URI}${user_name} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NOT_FOUND}] |
| |
| # Create specified user when force is True or User does not exist. |
| ${payload}= Create Dictionary |
| ... UserName=${user_name} Password=${password} RoleId=${role_id} Enabled=${enabled} |
| |
| Run Keyword If ${force} == ${True} or ${user_exists} == ${False} |
| ... Redfish.Post ${REDFISH_ACCOUNTS_URI} body=&{payload} |
| ... valid_status_codes=[${HTTP_CREATED}] |
| |
| |
| Get User Role |
| [Documentation] Get User Role. |
| [Arguments] ${user_name} |
| |
| # Description of argument(s): |
| # user_name User name to get it's role. |
| |
| ${role_config}= Redfish_Utils.Get Attribute |
| ... ${REDFISH_ACCOUNTS_URI}${user_name} RoleId |
| |
| RETURN ${role_config} |
| |
| |
| Create Users With Different Roles |
| [Documentation] Create users with different roles. |
| [Arguments] ${users} ${force}=${False} |
| |
| # Description of argument(s): |
| # users Dictionary of roles and user credentials to be created. |
| # Ex: {'Administrator': '[admin_user, TestPwd123]', 'Operator': '[operator_user, TestPwd123]'} |
| # force Delete given user account if already exists when force is True. |
| |
| FOR ${role} IN @{users} |
| Redfish Create User ${users['${role}'][0]} ${users['${role}']}[1] ${role} ${True} ${force} |
| END |
| |
| |
| Delete BMC Users Via Redfish |
| [Documentation] Delete BMC users via redfish. |
| [Arguments] ${users} |
| |
| # Description of argument(s): |
| # users Dictionary of roles and user credentials to be deleted. |
| |
| FOR ${role} IN @{users} |
| Redfish.Delete /redfish/v1/AccountService/Accounts/${users['${role}'][0]} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NOT_FOUND}] |
| END |
| |
| |
| Expire And Update New Password Via Redfish |
| [Documentation] Expire and change password and verify using password. |
| [Arguments] ${username} ${password} ${new_password} |
| |
| # Description of argument(s): |
| # username The username to be used to login to the BMC. |
| # password The password to be used to login to the BMC. |
| # new_password The new password to be used to update password. |
| |
| # Expire admin password using ssh. |
| Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} |
| ${output} ${stderr} ${rc}= BMC Execute Command passwd --expire ${username} |
| Should Contain Any ${output} password expiry information changed |
| ... password changed |
| |
| # Verify user password expired using Redfish |
| Verify User Password Expired Using Redfish ${username} ${password} |
| |
| # Change user password. |
| Redfish.Patch /redfish/v1/AccountService/Accounts/${username} |
| ... body={'Password': '${new_password}'} |
| Redfish.Logout |
| |
| |
| Verify User Password Expired Using Redfish |
| [Documentation] Checking whether user password expired or not using redfish. |
| [Arguments] ${username} ${password} ${expected_result}=${True} |
| |
| # Description of argument(s): |
| # username The username to be used to login to the BMC. |
| # password The password to be used to login to the BMC. |
| |
| Redfish.Login ${username} ${password} |
| ${resp}= Redfish.Get /redfish/v1/AccountService/Accounts/${username} |
| Should Be Equal ${resp.dict["PasswordChangeRequired"]} ${expected_result} |
| |
| |
| Is BMC LastResetTime Changed |
| [Documentation] Return fail if BMC last reset time is not changed. |
| [Arguments] ${reset_time} |
| |
| # Description of argument(s): |
| # reset_time Last BMC reset time. |
| |
| ${last_reset_time}= Get BMC Last Reset Time |
| Should Not Be Equal ${last_reset_time} ${reset_time} |
| |
| |
| Redfish BMC Reboot |
| [Documentation] Use Redfish API reboot BMC and wait for BMC ready. |
| |
| # Get BMC last reset time for compare |
| ${last_reset_time}= Get BMC Last Reset Time |
| |
| # Reboot BMC by Redfish API |
| Redfish BMC Reset Operation |
| |
| # Wait for BMC real reboot and Redfish API ready |
| Wait Until Keyword Succeeds 3 min 10 sec Is BMC LastResetTime Changed ${last_reset_time} |
| |
| |
| Get BMC Last Reset Time |
| [Documentation] Return BMC LastResetTime. |
| |
| ${last_reset_time}= Redfish.Get Attribute /redfish/v1/Managers/${MANAGER_ID} LastResetTime |
| |
| RETURN ${last_reset_time} |