blob: 011cd04196406883e1d694bb704d0711da07d00a [file] [log] [blame]
*** Settings ***
Documentation Test BMC multiple network interface functionalities.
# User input BMC IP for the eth1.
# Use can input as -v OPENBMC_HOST_1:xx.xxx.xx from command line.
Library ../../lib/bmc_redfish.py https://${OPENBMC_HOST_1}:${HTTPS_PORT}
... ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} WITH NAME Redfish1
Resource ../../lib/resource.robot
Resource ../../lib/common_utils.robot
Resource ../../lib/connection_client.robot
Resource ../../lib/bmc_network_utils.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/bmc_ldap_utils.robot
Resource ../../lib/snmp/resource.robot
Resource ../../lib/snmp/redfish_snmp_utils.robot
Resource ../../lib/certificate_utils.robot
Library ../../lib/jobs_processing.py
Library OperatingSystem
Suite Setup Suite Setup Execution
Test Teardown FFDC On Test Case Fail
Suite Teardown Run Keywords Redfish1.Logout AND Redfish.Logout
*** Variables ***
${cmd_prefix} ipmitool -I lanplus -C 17 -p 623 -U ${OPENBMC_USERNAME} -P ${OPENBMC_PASSWORD}
${test_ipv4_addr} 10.7.7.7
${test_ipv4_addr2} 10.7.7.8
${test_subnet_mask} 255.255.255.0
*** Test Cases ***
Verify Both Interfaces BMC IP Addresses Accessible Via SSH
[Documentation] Verify both interfaces (eth0, eth1) BMC IP addresses accessible via SSH.
[Tags] Verify_Both_Interfaces_BMC_IP_Addresses_Accessible_Via_SSH
Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} host=${OPENBMC_HOST}
Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} host=${OPENBMC_HOST_1}
Close All Connections
Verify Redfish Works On Both Interfaces
[Documentation] Verify access BMC with both interfaces (eth0, eth1) IP addresses via Redfish.
[Tags] Verify_Redfish_Works_On_Both_Interfaces
[Teardown] Run Keywords
... Configure Hostname ${hostname} AND Validate Hostname On BMC ${hostname}
Redfish1.Login
Redfish.Login
${hostname}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName
${data}= Create Dictionary HostName=openbmc
Redfish1.patch ${REDFISH_NW_ETH_IFACE}eth1 body=&{data}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Validate Hostname On BMC openbmc
${resp1}= Redfish.Get ${REDFISH_NW_ETH_IFACE}eth0
${resp2}= Redfish1.Get ${REDFISH_NW_ETH_IFACE}eth1
Should Be Equal ${resp1.dict['HostName']} ${resp2.dict['HostName']}
Verify LDAP Login Works When Eth1 IP Is Not Configured
[Documentation] Verify LDAP login works when eth1 IP is erased.
[Tags] Verify_LDAP_Login_Works_When_Eth1_IP_Is_Not_Configured
[Setup] Run Keywords Set Test Variable ${CHANNEL_NUMBER} ${SECONDARY_CHANNEL_NUMBER}
... AND Delete IP Address ${OPENBMC_HOST_1}
... AND Redfish.Login
[Teardown] Run Keywords Redfish.Logout AND
... Add IP Address ${OPENBMC_HOST_1} ${eth1_subnet_mask} ${eth1_gateway}
Create LDAP Configuration
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Verify LDAP Login Works When Both Interfaces Are Configured
[Documentation] Verify LDAP login works when both interfaces are configured.
[Tags] Verify_LDAP_Login_Works_When_Both_Interfaces_Are_Configured
[Setup] Redfish.Login
[Teardown] Redfish.Logout
Create LDAP Configuration
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Verify Secure LDAP Login Works When Both Interfaces Are Configured
[Documentation] Verify Secure LDAP login works when both the interfaces are configured.
[Tags] Verify_Secure_LDAP_Login_Works_When_Both_Interfaces_Are_Configured
[Setup] Redfish.Login
[Teardown] Redfish.Logout
Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI_1} ${LDAP_BIND_DN}
... ${LDAP_BIND_DN_PASSWORD} ${LDAP_BASE_DN}
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Verify SNMP Works When Eth1 IP Is Not Configured
[Documentation] Verify SNMP works when eth1 IP is not configured.
[Tags] Verify_SNMP_Works_When_Eth1_IP_Is_Not_Configured
[Setup] Run Keywords Set Test Variable ${CHANNEL_NUMBER} ${SECONDARY_CHANNEL_NUMBER}
... AND Delete IP Address ${OPENBMC_HOST_1}
[Teardown] Run Keywords Redfish.Login AND
... Add IP Address ${OPENBMC_HOST_1} ${eth1_subnet_mask} ${eth1_gateway}
Create Error On BMC And Verify Trap
Disable And Enable Eth0 Interface
[Documentation] Disable and Enable eth0 ethernet interface via redfish.
[Tags] Disable_And_Enable_Eth0_Interface
[Template] Set BMC Ethernet Interfaces State
# interface_ip interface enabled
${OPENBMC_HOST} eth0 ${False}
${OPENBMC_HOST} eth0 ${True}
Verify Both Interfaces Access Concurrently Via Redfish
[Documentation] Verify both interfaces access conurrently via redfish.
[Tags] Verify_Both_Interfaces_Access_Concurrently_Via_Redfish
Redfish.Login
Redfish1.Login
${dict}= Execute Process Multi Keyword ${2}
... Redfish.Patch ${REDFISH_NW_ETH_IFACE}eth0 body={'DHCPv4':{'UseDNSServers':${True}}}
... Redfish1.Patch ${REDFISH_NW_ETH_IFACE}eth1 body={'DHCPv4':{'UseDNSServers':${True}}}
Dictionary Should Not Contain Value ${dict} False
... msg=One or more operations has failed.
${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}eth0
${resp1}= Redfish1.Get ${REDFISH_NW_ETH_IFACE}eth1
Should Be Equal ${resp.dict["DHCPv4"]['UseDNSServers']} ${True}
Should Be Equal ${resp1.dict["DHCPv4"]['UseDNSServers']} ${True}
Able To Access Serial Console Via Both Network Interfaces
[Documentation] Able to access serial console via both network interfaces.
[Tags] Able_To_Access_Serial_Console_Via_Both_Network_Interfaces
Open Connection And Log In host=${OPENBMC_HOST} port=2200
Open Connection And Log In host=${OPENBMC_HOST_1} port=2200
Close All Connections
Verify IPMI Works On Both Network Interfaces
[Documentation] Verify IPMI works on both network interfaces.
[Tags] Verify_IPMI_Works_On_Both_Network_Interfaces
Run IPMI ${OPENBMC_HOST_1} power on
${status1}= Run IPMI ${OPENBMC_HOST} power status
${status2}= Run IPMI ${OPENBMC_HOST_1} power status
Should Be Equal ${status1} ${status2}
Verify Modifying IP Address Multiple Times On Interface
[Documentation] Verify modifying IP address multiple times on interface.
[Tags] Verify_Modifying_IP_Address_Multiple_Times_On_Interface
[Teardown] Run Keywords
... Delete IP Address ${test_ipv4_addr} AND Test Teardown
${test_gateway}= Get BMC Default Gateway
Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway}
Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway}
Update IP Address ${test_ipv4_addr2} ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway}
Run Keyword Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
Run Keyword Wait For Host To Ping ${OPENBMC_HOST_1} ${NETWORK_TIMEOUT}
Verify Able To Load Certificates Via Eth1 IP Address
[Documentation] Verify able to load certificates via eth1 IP address.
[Setup] Create Directory certificate_dir
[Tags] Verify_Able_To_Load_Certificates_Via_Eth1_IP_Address
[Teardown] Run Keywords Remove Directory certificate_dir recursive=True
... AND FFDC On Test Case Fail
[Template] Install Certificate Via Redfish And Verify
# cert_type cert_format expected_status
CA Valid Certificate ok
Client Valid Certificate Valid Privatekey ok
*** Keywords ***
Get Network Configuration Using Channel Number
[Documentation] Get ethernet interface.
[Arguments] ${channel_number}
# Description of argument(s):
# channel_number Ethernet channel number, 1 is for eth0 and 2 is for eth1 (e.g. "1").
${active_channel_config}= Get Active Channel Config
${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']}
${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface}
@{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses
RETURN @{network_configurations}
Suite Setup Execution
[Documentation] Do suite setup task.
Valid Value OPENBMC_HOST_1
# Check both interfaces are configured and reachable.
Ping Host ${OPENBMC_HOST}
Ping Host ${OPENBMC_HOST_1}
${network_configurations}= Get Network Configuration Using Channel Number ${SECONDARY_CHANNEL_NUMBER}
FOR ${network_configuration} IN @{network_configurations}
Run Keyword If '${network_configuration['Address']}' == '${OPENBMC_HOST_1}'
... Run Keywords Set Suite Variable ${eth1_subnet_mask} ${network_configuration['SubnetMask']}
... AND Set Suite Variable ${eth1_gateway} ${network_configuration['Gateway']}
... AND Exit For Loop
END
Set BMC Ethernet Interfaces State
[Documentation] Set BMC ethernet interface state.
[Arguments] ${interface_ip} ${interface} ${enabled}
[Teardown] Redfish1.Logout
# Description of argument(s):
# interface_ip IP address of ethernet interface.
# interface The ethernet interface name (eg. eth0 or eth1).
# enabled Indicates interface should be enabled (eg. True or False).
Redfish1.Login
${data}= Create Dictionary InterfaceEnabled=${enabled}
Redfish1.patch ${REDFISH_NW_ETH_IFACE}${interface} body=&{data}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Sleep ${NETWORK_TIMEOUT}s
${interface_status}= Redfish1.Get Attribute ${REDFISH_NW_ETH_IFACE}${interface} InterfaceEnabled
Should Be Equal ${interface_status} ${enabled}
${status}= Run Keyword And Return Status Ping Host ${interface_ip}
Run Keyword If ${enabled} == ${True} Should Be Equal ${status} ${True}
... ELSE Should Be Equal ${status} ${False}
Run IPMI
[Documentation] Run IPMI command.
[Arguments] ${host} ${sub_cmd}
# Description of argument(s):
# host BMC host name or IP address.
# sub_cmd The IPMI command string to be executed.
${rc} ${output}= Run And Return Rc And Output ${cmd_prefix} -H ${host} ${sub_cmd}
Should Be Equal As Strings ${rc} 0
RETURN ${output}
Install Certificate Via Redfish And Verify
[Documentation] Install and verify certificate using Redfish.
[Arguments] ${cert_type} ${cert_format} ${expected_status} ${delete_cert}=${True}
# Description of argument(s):
# cert_type Certificate type (e.g. "Client" or "CA").
# cert_format Certificate file format
# (e.g. "Valid_Certificate_Valid_Privatekey").
# expected_status Expected status of certificate replace Redfish
# request (i.e. "ok" or "error").
# delete_cert Certificate will be deleted before installing if this True.
# AUTH_URI is a global variable defined in lib/resource.robot
Set Test Variable ${AUTH_URI} https://${OPENBMC_HOST_1}
Run Keyword If '${cert_type}' == 'CA' and '${delete_cert}' == '${True}'
... Delete All CA Certificate Via Redfish
... ELSE IF '${cert_type}' == 'Client' and '${delete_cert}' == '${True}'
... Delete Certificate Via BMC CLI ${cert_type}
${cert_file_path}= Generate Certificate File Via Openssl ${cert_format}
${bytes}= OperatingSystem.Get Binary File ${cert_file_path}
${file_data}= Decode Bytes To String ${bytes} UTF-8
${certificate_uri}= Set Variable If
... '${cert_type}' == 'Client' ${REDFISH_LDAP_CERTIFICATE_URI}
... '${cert_type}' == 'CA' ${REDFISH_CA_CERTIFICATE_URI}
${cert_id}= Install Certificate File On BMC ${certificate_uri} ${expected_status} data=${file_data}
Logging Installed certificate id: ${cert_id}
Sleep 30s
${cert_file_content}= OperatingSystem.Get File ${cert_file_path}
${bmc_cert_content}= Run Keyword If '${expected_status}' == 'ok' redfish_utils.Get Attribute
... ${certificate_uri}/${cert_id} CertificateString
Run Keyword If '${expected_status}' == 'ok' Should Contain ${cert_file_content} ${bmc_cert_content}
RETURN ${cert_id}