blob: 5cb0f86c7a6bd883cdff48848fef9be15283cbcd [file] [log] [blame]
*** Settings ***
Documentation VMI static/dynamic IP config and certificate exchange tests.
Resource ../../lib/resource.robot
Resource ../../lib/bmc_redfish_resource.robot
Resource ../../lib/openbmc_ffdc.robot
Suite Setup Redfish.Login
Test Teardown FFDC On Test Case Fail
Suite Teardown Redfish.Logout
*** Variables ***
&{DHCP_ENABLED} DHCPEnabled=${${True}}
&{DHCP_DISABLED} DHCPEnabled=${${False}}
&{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED}
&{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED}
*** Test Cases ***
Verify All VMI EthernetInterfaces
[Documentation] Verify all VMI ethernet interfaces.
[Tags] Verify_All_VMI_EthernetINterfaces
Verify VMI EthernetInterfaces
Verify Existing VMI Network Interface Details
[Documentation] Verify existing VMI network interface details.
[Tags] Verify_VMI_Network_Interface_Details
${vmi_ip}= Get VMI Network Interface Details
${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP
Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]}
Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]}
Should Be Equal As Strings ${vmi_ip["Id"]} intf0
Should Be Equal As Strings ${vmi_ip["Description"]}
... Ethernet Interface for Virtual Management Interface
Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface
Should Be True ${vmi_ip["InterfaceEnabled"]}
Delete Existing Static VMI IP Address
[Documentation] Delete existing static VMI IP address.
[Tags] Delete_Existing_Static_VMI_IP_Address
${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED}
Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED}
${default}= Set Variable 0.0.0.0
Verify VMI Network Interface Details ${default} Static ${default} ${default} ${True}
Verify User Cannot Delete ReadOnly Property IPv4Addresses
[Documentation] Verify user cannot delete readonly property IPv4Addresses.
[Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses
${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED}
Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST}
Assign Static IPv4 Address To VMI
[Documentation] Assign static IPv4 address to VMI.
[Tags] Assign_Static_IPv4_Address_To_VMI
[Template] Verify Assigning Static IPv4 Address To VMI
# ip gateway netmask del_curr_ip host_reboot valid_status_code
${VMI_IP} ${VMI_GATEWAY} ${VMI_NETMASK} ${False} ${True} ${HTTP_ACCEPTED}
a.3.118.94 ${VMI_GATEWAY} ${VMI_NETMASK} ${False} ${False} ${HTTP_BAD_REQUEST}
10.118.94 10.118.3.Z ${VMI_NETMASK} ${False} ${False} ${HTTP_BAD_REQUEST}
Switch Between IP Origins On VMI And Verify Details
[Documentation] Switch between IP origins on VMI and verify details.
[Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details
Switch VMI IPv4 Origin And Verify Details
Switch VMI IPv4 Origin And Verify Details
Verify Persistency Of VMI IPv4 Details After Host Reboot
[Documentation] Verify persistency of VMI IPv4 details after host reboot.
[Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot
# Verifying persistency of dynamic address.
Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED}
${default}= Set Variable 0.0.0.0
Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True}
Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True}
# Verifying persistency of static address.
Switch VMI IPv4 Origin And Verify Details ${True}
Verify Assigning Static IPv4 Address To VMI ${VMI_IP} ${VMI_GATEWAY} ${VMI_NETMASK} ${False}
Verify VMI Network Interface Details ${VMI_IP} Static ${VMI_GATEWAY} ${VMI_NETMASK} ${True}
*** Keywords ***
Get VMI Network Interface Details
[Documentation] Get VMI network interface details.
[Arguments] ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# valid_status_code Expected valid status code from GET request.
# Note: It returns a dictionary of VMI eth0 parameters.
${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0
... valid_status_codes=[${valid_status_code}]
${ip_resp}= Evaluate json.loads('''${resp.text}''') json
${static_exists}= Run Keyword And Ignore Error
... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]}
${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False}
${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]}
... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]}
... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]}
... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]}
... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}}
... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} MACAddress=${ip_resp["MACAddress"]}
... IPv4StaticAddresses=${${static_exists}}
[Return] &{vmi_ip}
Get Immediate Child Parameter From VMI Network Interface
[Documentation] Get immediate child parameter from VMI network interface.
[Arguments] ${parameter} ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc.
# valid_status_code Expected valid status code from GET request.
${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0
... valid_status_codes=[${valid_status_code}]
${ip_resp}= Evaluate json.loads('''${resp.text}''') json
${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]}
... ${ip_resp["DHCPv4"]["${parameter}"]}
[Return] ${value}
Verify VMI EthernetInterfaces
[Documentation] Verify VMI ethernet interfaces.
[Arguments] ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# valid_status_code Expected valid status code from GET request.
${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces
... valid_status_codes=[${valid_status_code}]
${resp}= Evaluate json.loads('''${resp.text}''') json
${interfaces}= Set Variable ${resp["Members"]}
Should Be Equal As Strings ${interfaces[0]}[@odata.id]
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0
Should Be Equal As Strings ${interfaces[1]}[@odata.id]
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1
Should Be Equal ${resp["Members@odata.count"]} ${2}
Verify VMI Network Interface Details
[Documentation] Verify VMI network interface details.
[Arguments] ${ip} ${origin} ${gateway} ${netmask}
... ${host_reboot}=${False} ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# ip VMI IPv4 address.
# origin Origin of IPv4 address eg. Static or DHCP.
# gateway Gateway for VMI IP.
# netmask Subnetmask for VMI IP.
# valid_status_code Expected valid status code from GET request. Default is HTTP_OK.
# host_reboot Reboot HOST if True.
Run Keyword If ${host_reboot} == ${True} Run Keywords
... Redfish Power Off AND Redfish Power On AND Redfish.Login
${vmi_ip}= Get VMI Network Interface Details ${valid_status_code}
Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]}
Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]}
Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]}
Return From Keyword If '${origin}' == 'DHCP'
Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]}
Set Static IPv4 Address To VMI
[Documentation] Set static IPv4 address to VMI.
[Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# ip VMI IPv4 address.
# gateway Gateway for VMI IP.
# netmask Subnetmask for VMI IP.
# valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED.
${data}= Set Variable
... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]}
${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data}
... valid_status_codes=[${valid_status_code}]
Redfish Power On stack_mode=skip
Log To Console ${resp.text}
Verify Assigning Static IPv4 Address To VMI
[Documentation] Verify assigning static IPv4 address to VMI.
[Arguments] ${ip} ${gateway} ${netmask} ${del_curr_ip}=${True} ${host_reboot}=${True}
... ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# ip VMI IPv4 address.
# gateway Gateway for VMI IP.
# netmask Subnetmask for VMI IP.
# del_curr_ip Delete current VMI static IP if True.
# host_reboot True when HOST reboot is required.
# valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED.
# Delete current static IP based on user input.
${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_origin} == ${False} and ${del_curr_ip} == ${True} Delete VMI IPv4 Address
Set Static IPv4 Address To VMI ${ip} ${gateway} ${netmask} valid_status_code=${valid_status_code}
Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED}
Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} host_reboot=${host_reboot}
Delete VMI IPv4 Address
[Documentation] Delete VMI IPv4 address.
[Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses.
# Default is IPv4StaticAddresses.
# valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK.
${data}= Set Variable {"${delete_param}": [${Null}]}
${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data}
... valid_status_codes=[${valid_status_code}]
Set VMI IPv4 Origin
[Documentation] Set VMI IPv4 origin.
[Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False.
# valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK.
${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP}
${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data}
... valid_status_codes=[${valid_status_code}]
Switch VMI IPv4 Origin And Verify Details
[Documentation] Switch VMI IPv4 origin and verify details.
[Arguments] ${host_reboot}=${False}
# Description of argument(s):
# host_reboot Reboot HOST if True.
${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False}
${default}= Set Variable 0.0.0.0
${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static
Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED}
Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} ${host_reboot}
[Return] ${origin}