| *** Settings *** |
| |
| Documentation VMI static/dynamic IP config and certificate exchange tests. |
| |
| Resource ../../lib/resource.robot |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| |
| Suite Setup Redfish.Login |
| Test Teardown FFDC On Test Case Fail |
| Suite Teardown Redfish.Logout |
| |
| *** Variables *** |
| |
| &{DHCP_ENABLED} DHCPEnabled=${${True}} |
| &{DHCP_DISABLED} DHCPEnabled=${${False}} |
| |
| &{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} |
| &{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} |
| |
| |
| *** Test Cases *** |
| |
| Verify All VMI EthernetInterfaces |
| [Documentation] Verify all VMI ethernet interfaces. |
| [Tags] Verify_All_VMI_EthernetINterfaces |
| |
| Verify VMI EthernetInterfaces |
| |
| |
| Verify Existing VMI Network Interface Details |
| [Documentation] Verify existing VMI network interface details. |
| [Tags] Verify_VMI_Network_Interface_Details |
| |
| ${vmi_ip}= Get VMI Network Interface Details |
| ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP |
| |
| Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} |
| Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} |
| Should Be Equal As Strings ${vmi_ip["Id"]} intf0 |
| Should Be Equal As Strings ${vmi_ip["Description"]} Virtual Interface Management Network Interface |
| Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Ethernet Interface |
| Should Be True ${vmi_ip["InterfaceEnabled"]} |
| |
| |
| Delete Existing Static VMI IP Address |
| [Documentation] Delete existing static VMI IP address. |
| [Tags] Delete_Existing_Static_VMI_IP_Address |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} |
| |
| Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} Static ${default} ${default} ${True} |
| |
| |
| Verify User Cannot Delete ReadOnly Property IPv4Addresses |
| [Documentation] Verify user cannot delete readonly property IPv4Addresses. |
| [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST} |
| |
| |
| Assign Static IPv4 Address To VMI |
| [Documentation] Assign static IPv4 address to VMI. |
| [Tags] Assign_Static_IPv4_Address_To_VMI |
| [Template] Verify Assigning Static IPv4 Address To VMI |
| |
| # ip gateway netmask del_curr_ip host_reboot valid_status_code |
| ${VMI_IP} ${VMI_GATEWAY} ${VMI_NETMASK} ${False} ${True} ${HTTP_ACCEPTED} |
| a.3.118.94 ${VMI_GATEWAY} ${VMI_NETMASK} ${False} ${False} ${HTTP_BAD_REQUEST} |
| 10.118.94 10.118.3.Z ${VMI_NETMASK} ${False} ${False} ${HTTP_BAD_REQUEST} |
| |
| |
| Switch Between IP Origins On VMI And Verify Details |
| [Documentation] Switch between IP origins on VMI and verify details. |
| [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details |
| |
| Switch VMI IPv4 Origin And Verify Details |
| Switch VMI IPv4 Origin And Verify Details |
| |
| |
| Verify Persistency Of VMI IPv4 Details After Host Reboot |
| [Documentation] Verify persistency of VMI IPv4 details after host reboot. |
| [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot |
| |
| # Verifying persistency of dynamic address. |
| Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True} |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} ${True} |
| |
| # Verifying persistency of static address. |
| Switch VMI IPv4 Origin And Verify Details ${True} |
| Verify Assigning Static IPv4 Address To VMI ${VMI_IP} ${VMI_GATEWAY} ${VMI_NETMASK} ${False} |
| Verify VMI Network Interface Details ${VMI_IP} Static ${VMI_GATEWAY} ${VMI_NETMASK} ${True} |
| |
| |
| *** Keywords *** |
| |
| Get VMI Network Interface Details |
| [Documentation] Get VMI network interface details. |
| [Arguments] ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # valid_status_code Expected valid status code from GET request. |
| |
| # Note: It returns a dictionary of VMI intf0 parameters. |
| |
| ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${ip_resp}= Evaluate json.loads('''${resp.text}''') json |
| |
| ${static_exists}= Run Keyword And Ignore Error |
| ... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]} |
| ${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False} |
| |
| ${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]} |
| ... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]} |
| ... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]} |
| ... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]} |
| ... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}} |
| ... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]} MACAddress=${ip_resp["MACAddress"]} |
| ... IPv4StaticAddresses=${${static_exists}} |
| |
| [Return] &{vmi_ip} |
| |
| |
| Get Immediate Child Parameter From VMI Network Interface |
| [Documentation] Get immediate child parameter from VMI network interface. |
| [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. |
| # valid_status_code Expected valid status code from GET request. |
| |
| ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${ip_resp}= Evaluate json.loads('''${resp.text}''') json |
| ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} |
| ... ${ip_resp["DHCPv4"]["${parameter}"]} |
| |
| [Return] ${value} |
| |
| |
| Verify VMI EthernetInterfaces |
| [Documentation] Verify VMI ethernet interfaces. |
| [Arguments] ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # valid_status_code Expected valid status code from GET request. |
| |
| ${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${resp}= Evaluate json.loads('''${resp.text}''') json |
| ${interfaces}= Set Variable ${resp["Members"]} |
| |
| Should Be Equal As Strings ${interfaces[0]}[@odata.id] |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 |
| Should Be Equal As Strings ${interfaces[1]}[@odata.id] |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf1 |
| |
| Should Be Equal ${resp["Members@odata.count"]} ${2} |
| |
| |
| Verify VMI Network Interface Details |
| [Documentation] Verify VMI network interface details. |
| [Arguments] ${ip} ${origin} ${gateway} ${netmask} |
| ... ${host_reboot}=${False} ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ip VMI IPv4 address. |
| # origin Origin of IPv4 address eg. Static or DHCP. |
| # gateway Gateway for VMI IP. |
| # netmask Subnetmask for VMI IP. |
| # valid_status_code Expected valid status code from GET request. Default is HTTP_OK. |
| # host_reboot Reboot HOST if True. |
| |
| Run Keyword If ${host_reboot} == ${True} Run Keywords |
| ... Redfish Power Off AND Redfish Power On AND Redfish.Login |
| |
| ${vmi_ip}= Get VMI Network Interface Details ${valid_status_code} |
| Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]} |
| Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]} |
| Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]} |
| |
| Return From Keyword If '${origin}' == 'DHCP' |
| Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]} |
| |
| |
| Set Static IPv4 Address To VMI |
| [Documentation] Set static IPv4 address to VMI. |
| [Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # ip VMI IPv4 address. |
| # gateway Gateway for VMI IP. |
| # netmask Subnetmask for VMI IP. |
| # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. |
| |
| ${data}= Set Variable |
| ... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]} |
| |
| ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 body=${data} |
| ... valid_status_codes=[${valid_status_code}] |
| Redfish Power On stack_mode=skip |
| Log To Console ${resp.text} |
| |
| |
| Verify Assigning Static IPv4 Address To VMI |
| [Documentation] Verify assigning static IPv4 address to VMI. |
| [Arguments] ${ip} ${gateway} ${netmask} ${del_curr_ip}=${True} ${host_reboot}=${True} |
| ... ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # ip VMI IPv4 address. |
| # gateway Gateway for VMI IP. |
| # netmask Subnetmask for VMI IP. |
| # del_curr_ip Delete current VMI static IP if True. |
| # host_reboot True when HOST reboot is required. |
| # valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED. |
| |
| # Delete current static IP based on user input. |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${False} and ${del_curr_ip} == ${True} Delete VMI IPv4 Address |
| |
| Set Static IPv4 Address To VMI ${ip} ${gateway} ${netmask} valid_status_code=${valid_status_code} |
| Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED} |
| |
| Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask} host_reboot=${host_reboot} |
| |
| |
| Delete VMI IPv4 Address |
| [Documentation] Delete VMI IPv4 address. |
| [Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses. |
| # Default is IPv4StaticAddresses. |
| # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. |
| |
| ${data}= Set Variable {"${delete_param}": [${Null}]} |
| ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 body=${data} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| |
| Set VMI IPv4 Origin |
| [Documentation] Set VMI IPv4 origin. |
| [Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED} |
| |
| # Description of argument(s): |
| # dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False. |
| # valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK. |
| |
| ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} |
| ${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/intf0 body=${data} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| |
| Switch VMI IPv4 Origin And Verify Details |
| [Documentation] Switch VMI IPv4 origin and verify details. |
| [Arguments] ${host_reboot}=${False} |
| |
| # Description of argument(s): |
| # host_reboot Reboot HOST if True. |
| |
| ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| ${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False} |
| |
| ${default}= Set Variable 0.0.0.0 |
| ${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static |
| Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} |
| Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} ${host_reboot} |
| |
| [Return] ${origin} |