| *** Settings *** |
| Documentation Inventory of hardware FRUs under redfish. |
| |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/bmc_redfish_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Library ../../lib/gen_robot_valid.py |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Suite Teardown Execution |
| Test Setup Printn |
| Test Teardown Test Teardown Execution |
| |
| *** Variables *** |
| |
| # The passing criteria. Must have at least this many. |
| ${min_num_dimms} 2 |
| ${min_num_cpus} 1 |
| ${min_num_cores} 18 |
| ${min_num_power_supplies} 1 |
| |
| |
| *** Test Cases *** |
| |
| |
| Verify CPU And Core Count |
| [Documentation] Get the total number of CPUs and cores in the system. |
| ... Verify counts are above minimums. |
| [Tags] Verify_CPU_And_Core_Count |
| |
| # Select only CPUs with Health = "OK". |
| ${cpus_ok}= Filter Struct ${cpu_info} [('Health', 'OK')] |
| ${num_cpus}= Get Length ${cpus_ok} |
| |
| Rprint Vars num_cpus min_num_cpus |
| |
| # Assert that num_cpus is greater than or equal to min_num_cpus. |
| Valid Range num_cpus ${min_num_cpus} |
| |
| # Get the number of cores. |
| ${total_num_cores}= Set Variable ${0} |
| :FOR ${cpu} IN @{cpus_ok} |
| ${cores}= Get CPU TotalCores ${cpu} |
| ${total_num_cores}= Evaluate $total_num_cores + ${cores} |
| END |
| |
| Rprint Vars total_num_cores min_num_cores |
| |
| # Assert that total_num_cores is greater than or equal to |
| # min_num_cores. |
| Valid Range total_num_cores ${min_num_cores} |
| |
| |
| Get Memory Inventory Via Redfish And Verify |
| [Documentation] Get the number of DIMMs that are functional and enabled. |
| [Tags] Get_Memory_Inventory_Via_Redfish_And_Verify |
| |
| Verify FRU Inventory Minimums Memory ${min_num_dimms} |
| |
| |
| Get Memory Summary State And Verify Enabled |
| [Documentation] Check that the state of the MemorySummary attribute |
| ... under /redfish/v1/Systems/system is 'Enabled'. |
| [Tags] Get_Memory_Summary_State_And_Verify_Enabled |
| |
| ${status}= Redfish.Get Attribute ${SYSTEM_BASE_URI} MemorySummary |
| ${memory_summary_state}= Set Variable ${status['Status']['State']} |
| Rprint Vars memory_summary_state |
| |
| Should Be Equal As Strings Enabled ${memory_summary_state} |
| ... msg=MemorySummary State is not 'Enabled'. |
| |
| |
| Get System Serial And Verify Populated |
| [Documentation] Check that the System SerialNumber is non-blank. |
| [Tags] Get_System_Serial_And_Verify_Populated |
| |
| ${serial_number}= Redfish.Get Attribute ${SYSTEM_BASE_URI} SerialNumber |
| Valid Value serial_number |
| Rprint Vars serial_number |
| |
| |
| Get Model And Verify Populated |
| [Documentation] Check that the Model is non-blank. |
| [Tags] Get_Model_And_Verify_Populated |
| |
| ${model}= Redfish.Get Attribute ${SYSTEM_BASE_URI} Model |
| Valid Value model |
| Rprint Vars model |
| |
| |
| Get Available Power Supplies And Verify |
| [Documentation] Get the number of functional power supplies and |
| ... verify that it is at or above the minimum. |
| [Tags] Get_Available_Power_Supplies_And_Verify |
| |
| # Select only power supplies with Health = "OK". |
| ${power_supplies_ok}= Filter Struct ${power_supplies} [('Health', 'OK')] |
| |
| # Count the power supplies that are Enabled or StandbyOffline. |
| ${total_num_supplies}= Set Variable ${0} |
| :FOR ${power_supply} IN @{power_supplies_ok} |
| # Example of power_supply: |
| # power_supply = {'@odata.id': '/redfish/v1/Chassis/chassis/Power#/PowerSupplies/0', |
| # 'Manufacturer': '', 'MemberId': 'powersupply0', 'Model': '2100', 'Name': |
| # 'powersupply0', 'PartNumber': 'PNPWR123', 'PowerInputWatts': 394.0, |
| # 'SerialNumber': '75B12W', 'Status': {'Health': 'OK', 'State': 'Enabled'}} |
| ${state}= Set Variable ${power_supply['Status']['State']} |
| ${good_state}= Evaluate |
| ... any(x in '${state}' for x in ('Enabled', 'StandbyOffline')) |
| Run Keyword If not ${good_state} Continue For Loop |
| ${total_num_supplies}= Evaluate $total_num_supplies + ${1} |
| END |
| |
| Rprint Vars total_num_supplies min_num_power_supplies |
| |
| Valid Range total_num_supplies ${min_num_power_supplies} |
| |
| |
| Get Motherboard Serial And Verify Populated |
| [Documentation] Check that the Motherboard SerialNumber is non-blank. |
| [Tags] Get_Motherboard_Serial_And_Verify_Populated |
| |
| ${serial_number}= Redfish.Get Attribute |
| ... ${REDFISH_CHASSIS_URI}motherboard SerialNumber |
| Valid Value serial_number |
| Rprint Vars serial_number |
| |
| |
| Verify Motherboard Manufacturer Field Value Populated |
| [Documentation] Check that the Motherboard manufacturer is non-blank. |
| [Tags] Verify_Motherboard_Manufacturer_Field_Value_Populated |
| |
| ${motherboard_manufacturer}= Redfish.Get Attribute |
| ... ${REDFISH_CHASSIS_URI}motherboard Manufacturer |
| Valid Value motherboard_manufacturer |
| |
| |
| Verify Motherboard Partnumber Field Value Populated |
| [Documentation] Check that the Motherboard partnumber is non-blank. |
| [Tags] Verify_Motherboard_Partnumber_Field_Value_Populated |
| |
| ${motherboard_part_number}= Redfish.Get Attribute |
| ... ${REDFISH_CHASSIS_URI}motherboard PartNumber |
| Valid Value motherboard_part_number |
| |
| |
| Check GPU States When Power On |
| [Documentation] Check the State of each of the GPUs |
| ... in the system. A system may have 0-6 GPUs. |
| [Tags] Check_GPU_States_When_Power_On |
| |
| # System was powered-on in Suite Setup. |
| GPU State Check |
| |
| |
| Check GPU States When Power Off |
| [Documentation] Check the State of the GPUs when power is Off. |
| [Tags] Check_GPU_States_When_Power_Off |
| |
| Redfish Power Off |
| GPU State Check |
| |
| |
| *** Keywords *** |
| |
| |
| Get CPU TotalCores |
| [Documentation] Return the TotalCores of a CPU. |
| ... Return 0 if this attribute is missing or NONE. |
| [Arguments] ${processor} |
| |
| # Description of Argument(s): |
| # processor The Redfish URI of a CPU (e.g. |
| # "/redfish/v1/Systems/system/Processors/cpu0"). |
| |
| ${total_cores}= Redfish.Get Attribute ${processor} TotalCores |
| Return From Keyword If ${total_cores} is ${NONE} ${0} |
| [Return] ${total_cores} |
| |
| |
| GPU State Check |
| [Documentation] The state of every "OK" GPU should be |
| ... "Absent", "Enabled", or "UnavailableOffline". |
| |
| # Select only GPUs with Health = "OK". |
| ${gpus_ok}= Filter Struct ${gpu_info} [('Health', 'OK')] |
| |
| :FOR ${gpu} IN @{gpus_ok} |
| ${status}= Redfish.Get Attribute ${gpu} Status |
| ${state}= Set Variable ${status['State']} |
| ${good_state}= Evaluate |
| ... any(x in '${state}' for x in ('Absent', 'Enabled', 'UnavailableOffline')) |
| Rprint Vars gpu state |
| Run Keyword If not ${good_state} Fail |
| ... msg=GPU State is not Absent, Enabled, or UnavailableOffline. |
| END |
| |
| |
| Get Inventory URIs |
| [Documentation] Get and return a tuple of lists of URIs for CPU, |
| ... GPU and PowerSupplies. |
| |
| ${processor_info}= Redfish_Utils.Enumerate Request |
| ... ${SYSTEM_BASE_URI}Processors return_json=0 |
| |
| ${cpu_info}= Filter Struct ${processor_info} |
| ... [('ProcessorType', 'CPU')] regex=1 |
| |
| ${gpu_info}= Filter Struct ${processor_info} |
| ... [('ProcessorType', 'Accelerator')] regex=1 |
| |
| ${power_supplies}= Redfish.Get Attribute |
| ... ${REDFISH_CHASSIS_POWER_URI} PowerSupplies |
| |
| [Return] ${cpu_info} ${gpu_info} ${power_supplies} |
| |
| |
| Verify FRU Inventory Minimums |
| [Documentation] Verify a minimum number of FRUs. |
| [Arguments] ${fru_type} ${min_num_frus} |
| |
| # Description of Argument(s): |
| # fru_type The type of FRU (e.g. "Processors", "Memory", etc.). |
| # min_num_frus The minimum acceptable number of FRUs found. |
| |
| # A valid FRU will have a "State" key of "Enabled" and a "Health" key |
| # of "OK". |
| |
| ${status} ${num_valid_frus}= Run Key U Get Num Valid FRUs \ ${fru_type} |
| |
| Rprint Vars fru_type num_valid_frus min_num_frus |
| |
| Return From Keyword If ${num_valid_frus} >= ${min_num_frus} |
| Fail Too few "${fru_type}" FRUs found, found only ${num_valid_frus}. |
| |
| |
| Suite Teardown Execution |
| [Documentation] Do the post suite teardown. |
| |
| Redfish.Logout |
| |
| |
| Suite Setup Execution |
| [Documentation] Do test case setup tasks. |
| |
| Redfish.Login |
| Redfish Power On stack_mode=skip |
| |
| ${cpu_info} ${gpu_info} ${power_supplies}= Get Inventory URIs |
| |
| Set Suite Variable ${cpu_info} |
| Set Suite Variable ${gpu_info} |
| Set Suite Variable ${power_supplies} |
| |
| |
| Test Teardown Execution |
| [Documentation] Do the post test teardown. |
| |
| FFDC On Test Case Fail |