blob: 8771e86a46d3a3d8f5e233c1a84ed65d7e7b1f06 [file] [log] [blame]
*** Settings ***
Documentation Trigger code update to a target BMC.
... Execution Method :
... python -m robot -v OPENBMC_HOST:<hostname>
... -v FILE_PATH:<path/*all.tar> update_bmc.robot
...
... Code update method BMC using REST
... Update work flow sequence:
... - User input BMC File existence check
... - Ping Test and REST authentication
... - Set Host Power host setting Policy to RESTORE_LAST_STATE
... On reboot this policy would ensure the BMC comes
... online and stays at HOST_POWERED_OFF state.
... - Issue poweroff
... - Prune archived journal logs
... - Prepare for Update
... - Wait for BMC to come online clean
... - Wait for BMC_READY state
... - Apply preserve BMC Network setting
... - SCP image to BMC
... - Activate the flash image
... - Warm Reset BMC to activate code
... - Wait for BMC to come online time out 30 minutes
... - Version check post update
... - Identify REST url post update
Library ../../lib/gen_robot_keyword.py
Library String
Resource code_update_utils.robot
Resource ../../lib/boot/boot_resource_master.robot
Resource ../../lib/state_manager.robot
Resource ../../lib/utils.robot
Resource ../../lib/list_utils.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../extended/obmc_boot_test_resource.robot
Test Teardown Run Key FFDC On Test Case Fail
*** Variables ***
${QUIET} ${1}
# Boot failures are not acceptable so we set the threshold to 0.
${boot_fail_threshold} ${0}
${FILE_PATH} ${EMPTY}
${FORCE_UPDATE} ${0}
${REST_URL_FILE_PATH} ${EMPTY}
# There are two reboots issued by code update.
${MAX_BOOT_COUNT} ${2}
*** Test Cases ***
Test Basic BMC Performance Before Code Update
[Documentation] Check performance of memory, CPU & file system of BMC.
[Tags] Test_Basic_BMC_Performance_Before_Code_Update
Open Connection And Log In
Check BMC CPU Performance
Check BMC Mem Performance
Check BMC File System Performance
Check Core Dump Exist Before Code Update
[Documentation] Check core dump existence on BMC before code update.
[Tags] Check_Core_Dump_Exist_Before_Code_Update
Check For Core Dumps
Check URLs Before Code Update
[Documentation] Check available URLs before code update.
[Tags] Check_URLs_Before_Code_Update
${url_list}= Get URL List ${OPENBMC_BASE_URI}
Set Global Variable ${URL_BEFORE_CU} ${url_list}
${bmc_version}= Get BMC Version
Set Suite Variable ${bmc_version_before} ${bmc_version}
Initiate Code Update BMC
[Documentation] Initiate a code update on the BMC.
[Tags] Initiate_Code_Update_BMC
# TODO: Disabling version check until new logic are in place.
# ${status}= Run Keyword and Return Status
# ... Validate BMC Version before
# Run Keyword if '${status}' == '${False}'
# ... Pass Execution Same Driver version installed
# Enable user to bypass prerequisite operations.
# Use cases for if BMC is not in working state.
Run Keyword If ${FORCE_UPDATE} == ${0}
... Prepare BMC For Update
Run Key U Preserve BMC Network Setting
Run Key SCP Tar Image File To BMC \ ${FILE_PATH}
Run Key Activate BMC Flash Image
Run Key U OBMC Boot Test \ OBMC Reboot (off)
Run Key U Check Boot Count And Time
Run Keyword If ${BOOT_COUNT} == ${1}
... Log Boot time not updated by kernel. level=WARN
Install BMC Debug Tarball
[Documentation] Install the downloaded debug tarball on BMC.
[Tags] Install_BMC_Debug_Tarball
Run Keyword If '${DEBUG_TARBALL_PATH}' != '${EMPTY}'
... Install Debug Tarball On BMC ${DEBUG_TARBALL_PATH}
Compare URLs Before And After Code Update
[Documentation] Compare URLs before and after code update.
[Tags] Compare_URLs_Before_And_After_Code_Update
${bmc_version}= Get BMC Version
Set Suite Variable ${bmc_version_after} ${bmc_version}
# Exit test for same firmware version.
Pass Execution If '${bmc_version_before}' == '${bmc_version_after}'
... Same BMC firmware version found
${url_after_cu}= Get URL List ${OPENBMC_BASE_URI}
Compare URL List After Code Update ${URL_BEFORE_CU} ${url_after_cu}
Test Basic BMC Performance At Ready State
[Documentation] Check performance of memory, CPU & file system of BMC.
[Tags] Test_Basic_BMC_Performance_At_Ready_State
Open Connection And Log In
Check BMC CPU Performance
Check BMC Mem Performance
Check BMC File System Performance
Check Core Dump Exist After Code Update
[Documentation] Check core dump existence on BMC after code update.
[Tags] Check_Core_Dump_Exist_After_Code_Update
Check For Core Dumps
Enable Core Dump File Size To Be Unlimited
[Documentation] Set core dump file size to unlimited.
[Tags] Enable_Core_Dump_File_size_To_Be_unlimited
Set Core Dump File Size Unlimited
*** Keywords ***
Prepare BMC For Update
[Documentation] Prerequisite operation before code update.
Check Boot Count And Time
Prune Journal Log
Power Off Request
Set Policy Setting RESTORE_LAST_STATE
Prepare For Update
Check If BMC is Up 20 min 10 sec
Check Boot Count And Time
# Temporary fix for lab migration for driver which is booted with
# BMC state "/xyz/openbmc_project/state/BMC0/".
${status}= Run Keyword And Return Status Temp BMC URI Check
Run Keyword If '${status}' == '${False}'
... Wait For BMC Ready
... ELSE Wait For Temp BMC Ready
Check Boot Count And Time
[Documentation] Check for unexpected reboots.
Set BMC Reset Reference Time
Log To Console \n Boot Count: ${BOOT_COUNT}
Log To Console \n Boot Time: ${BOOT_TIME}
Run Keyword If ${BOOT_COUNT} > ${MAX_BOOT_COUNT}
... Log Phantom Reboot!!! Unexpected reboot detected level=WARN
Temp BMC URI Check
[Documentation] Check for transient "BMC0" interface.
${resp}= Openbmc Get Request /xyz/openbmc_project/state/BMC0/
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Check Temp BMC State
[Documentation] BMC state should be "Ready".
# quiet - Suppress REST output logging to console.
${state}=
... Read Attribute /xyz/openbmc_project/state/BMC0/ CurrentBMCState
Should Be Equal Ready ${state.rsplit('.', 1)[1]}
Wait For Temp BMC Ready
[Documentation] Check for BMC "Ready" until timedout.
Wait Until Keyword Succeeds
... 10 min 10 sec Check Temp BMC State
Compare URL List After Code Update
[Documentation] Compare URL list before and after code update.
[Arguments] ${url_before_cu} ${url_after_cu}
# Description of arguments:
# url_before_cu List of URLs available before code update.
# url_after_cu List of URLs available after code update.
${url_removed_list}= Subtract Lists ${url_before_cu} ${url_after_cu}
${url_added_list}= Subtract Lists ${url_after_cu} ${url_before_cu}
Log ${url_removed_list}
Log ${url_added_list}
Return From Keyword If '${REST_URL_FILE_PATH}' == '${EMPTY}'
# Create file with BMC firmware version before and after code update.
# i.e. <Before_Version>--<After_Version>
# Example v1.99.6-141-ge662190--v1.99.6-141-ge664242
${file_name}= Catenate SEPARATOR=--
... ${bmc_version_before} ${bmc_version_after}
${REST_URL_FILE}= Catenate ${REST_URL_FILE_PATH}/${file_name}
Create File ${REST_URL_FILE} URL Removed${\n}
Return From Keyword If
... ${url_removed_list} == [] and ${url_added_list} == []
Create File ${REST_URL_FILE} URL Removed${\n}
Append To File ${REST_URL_FILE} [${url_removed_list}]
Append To File ${REST_URL_FILE} ${\n}URL Added${\n}
Append To File ${REST_URL_FILE} [${url_added_list}]