lib/pdu/schneider.robot

*** Settings ***
Documentation   Schneider Power Distribution Unit (PDU) library

Library         Telnet
Library         SSHLibrary
Resource        ../../lib/pdu/pdu.robot

*** Keywords ***
Login To Schneider PDU Via SSH
    [Documentation]  Open PDU connection and login via SSH.

    Validate Prereq
    SSHLibrary.Open Connection  ${PDU_IP}  prompt=apc>
    ${connection_status}=  Run Keyword And Return Status
    ...  SSHLibrary.Login  ${PDU_USERNAME}  ${PDU_PASSWORD}
    Return From Keyword  ${connection_status}


Login To Schneider PDU Via Telnet
    [Documentation]  Open PDU connection and login via telnet.

    Validate Prereq
    Telnet.Open Connection  ${PDU_IP}

    Telnet.Write  \n
    Telnet.Read Until  User Name :
    Telnet.Write  ${PDU_USERNAME}

    Telnet.Read Until  Password${SPACE}${SPACE}:
    Telnet.Write  ${PDU_PASSWORD}

    Set Prompt  apc>
    Telnet.Read Until Prompt
    Telnet.Write  ?
    Telnet.Read Until Prompt


Power Cycle
    [Documentation]  Perform PDU power cycle.

    # Sample output from schneider PDU console

    # Schneider Electric                      Network Management Card AOS      v6.9.6
    # (c) Copyright 2020 All Rights Reserved  RPDU 2g APP                      v6.9.6
    # -------------------------------------------------------------------------------
    # Name      : apc566BF4                                 Date : 07/07/2022
    # Contact   : Unknown                                   Time : 01:18:18
    # Location  : Unknown                                   User : Super User
    # Up Time   : 0 Days 12 Hours 17 Minutes                Stat : P+ N4+ N6+ A+
    # -------------------------------------------------------------------------------
    # IPv4               : Enabled            IPv6               : Enabled
    # Ping Response      : Enabled
    # -------------------------------------------------------------------------------
    # HTTP               : Disabled           HTTPS              : Enabled
    # FTP                : Disabled           Telnet             : Disabled
    # SSH/SCP            : Enabled            SNMPv1             : Disabled
    # SNMPv3             : Disabled
    # -------------------------------------------------------------------------------
    # Super User         : Enabled            RADIUS             : Disabled
    # Administrator      : Disabled           Device User        : Disabled
    # Read-Only User     : Disabled           Network-Only User  : Disabled


    # Type ? for command listing
    # Use tcpip command for IP address(-i), subnet(-s), and gateway(-g)

    # apc>?
    # System Commands:
    # ---------------------------------------------------------------------------
    # For command help: command ?

    # ?           about       alarmcount  boot        bye         cd
    # cipher      clrrst      console     date        delete      dir
    # dns         eapol       email       eventlog    exit        firewall
    # format      ftp         help        lang        lastrst     ledblink
    # logzip      netstat     ntp         ping        portspeed   prompt
    # pwd         quit        radius      reboot      resetToDef  session
    # smtp        snmp        snmptrap    snmpv3      system      tcpip
    # tcpip6      user        userdflt    web         whoami      xferINI
    # xferStatus

    # Device Commands:
    # ---------------------------------------------------------------------------
    # alarmList   bkLowLoad   bkNearOver  bkOverLoad  bkReading   bkPeakCurr
    # bkRestrictn devStartDly energyWise  olAssignUsr olCancelCmd olDlyOff
    # olDlyOn     olDlyReboot olGroups    olName      olOff       olOffDelay
    # olOn        olOnDelay   olRbootTime olReboot    olStatus    olUnasgnUsr
    # phLowLoad   phNearOver  phOverLoad  phReading   phPeakCurr  phRestrictn
    # prodInfo    userAdd     userDelete  userList    userPasswd

    # apc>olReboot 3,4,5,6,7,8
    # E000: Success

    # Enter command olOn <Outlet number> & verify success.

    ${connection_status}=  Login To Schneider PDU Via SSH

    IF  '${connection_status}' == '${False}'
        Set Suite Variable  ${lib_name}  Telnet
        Login To Schneider PDU Via Telnet
    ELSE
        Set Suite Variable  ${lib_name}  SSHLibrary
    END

    @{outlets}=  Split String  ${PDU_SLOT_NO}  separator=,
    FOR  ${outlet}  IN  @{outlets}
        Run Keyword  ${lib_name}.Write  olReboot ${outlet}
        ${output}=  Run Keyword  ${lib_name}.Read Until Prompt
        Should Contain  ${output}  Success  msg=Device Command Failed
    END