redfish/systems/test_systems_inventory.robot - openbmc/openbmc-test-automation - Gitiles

 *** Settings ***
 Documentation       Inventory of hardware FRUs under redfish.

 Resource            ../../lib/bmc_redfish_resource.robot
 Resource            ../../lib/bmc_redfish_utils.robot
 Resource            ../../lib/openbmc_ffdc.robot
 Library             ../../lib/gen_robot_valid.py

 Suite Setup         Suite Setup Execution
 Suite Teardown      Suite Teardown Execution
 Test Setup          Printn
 Test Teardown       Test Teardown Execution

 *** Variables ***

 # The passing criteria.  Must have at least this many.
 ${min_num_dimms}   2
 ${min_num_cpus}    1
 ${min_num_cores}   18
 ${min_num_power_supplies}  1


 *** Test Cases ***


 Verify CPU And Core Count
     [Documentation]  Get the total number of CPUs and cores in the system.
     ...              Verify counts are above minimums.
     [Tags]  Verify_CPU_And_Core_Count

     # Select only CPUs with Health = "OK".
     ${cpus_ok}=  Filter Struct  ${cpu_info}  [('Health', 'OK')]
     ${num_cpus}=   Get Length  ${cpus_ok}

     Rprint Vars  num_cpus  min_num_cpus

     # Assert that num_cpus is greater than or equal to min_num_cpus.
     Valid Range  num_cpus  ${min_num_cpus}

     # Get the number of cores.
     ${total_num_cores}=  Set Variable  ${0}
     FOR  ${cpu}  IN  @{cpus_ok}
         ${cores}=   Get CPU TotalCores  ${cpu}
         ${total_num_cores}=  Evaluate  $total_num_cores + ${cores}
     END

     Rprint Vars  total_num_cores  min_num_cores

     # Assert that total_num_cores is greater than or equal to
     # min_num_cores.
     Valid Range  total_num_cores  ${min_num_cores}


 Get Memory Inventory Via Redfish And Verify
     [Documentation]  Get the number of DIMMs that are functional and enabled.
     [Tags]  Get_Memory_Inventory_Via_Redfish_And_Verify

     Verify FRU Inventory Minimums  Memory  ${min_num_dimms}


 Get Memory Summary State And Verify Enabled
     [Documentation]  Check that the state of the MemorySummary attribute
     ...              under /redfish/v1/Systems/system is 'Enabled'.
     [Tags]  Get_Memory_Summary_State_And_Verify_Enabled

     ${status}=  Redfish.Get Attribute  ${SYSTEM_BASE_URI}  MemorySummary
     ${memory_summary_state}=  Set Variable  ${status['Status']['State']}
     Rprint Vars  memory_summary_state

     Should Be Equal As Strings  Enabled  ${memory_summary_state}
     ...  msg=MemorySummary State is not 'Enabled'.


 Get System Serial And Verify Populated
     [Documentation]  Check that the System SerialNumber is non-blank.
     [Tags]  Get_System_Serial_And_Verify_Populated

     ${serial_number}=  Redfish.Get Attribute  ${SYSTEM_BASE_URI}  SerialNumber
     Valid Value  serial_number
     Rprint Vars  serial_number


 Get Model And Verify Populated
     [Documentation]  Check that the Model is non-blank.
     [Tags]  Get_Model_And_Verify_Populated

     ${model}=  Redfish.Get Attribute  ${SYSTEM_BASE_URI}  Model
     Valid Value  model
     Rprint Vars  model


 Get Available Power Supplies And Verify
     [Documentation]  Get the number of functional power supplies and
     ...              verify that it is at or above the minimum.
     [Tags]  Get_Available_Power_Supplies_And_Verify

     # Select only power supplies with Health = "OK".
     ${power_supplies_ok}=  Filter Struct  ${power_supplies}  [('Health', 'OK')]

     # Count the power supplies that are Enabled or StandbyOffline.
     ${total_num_supplies}=  Set Variable  ${0}
     FOR  ${power_supply}  IN  @{power_supplies_ok}
         # Example of power_supply:
         # power_supply = {'@odata.id': '/redfish/v1/Chassis/chassis/Power#/PowerSupplies/0',
         # 'Manufacturer': '', 'MemberId': 'powersupply0', 'Model': '2100', 'Name':
         # 'powersupply0', 'PartNumber': 'PNPWR123', 'PowerInputWatts': 394.0,
         # 'SerialNumber': '75B12W', 'Status': {'Health': 'OK', 'State': 'Enabled'}}
         ${state}=  Set Variable  ${power_supply['Status']['State']}
         ${good_state}=  Evaluate
         ...  any(x in '${state}' for x in ('Enabled', 'StandbyOffline'))
         Run Keyword If  not ${good_state}  Continue For Loop
         ${total_num_supplies}=  Evaluate  $total_num_supplies + ${1}
     END

     Rprint Vars  total_num_supplies  min_num_power_supplies

     Valid Range  total_num_supplies  ${min_num_power_supplies}


 Get Motherboard Serial And Verify Populated
     [Documentation]  Check that the Motherboard SerialNumber is non-blank.
     [Tags]  Get_Motherboard_Serial_And_Verify_Populated

     ${serial_number}=  Redfish.Get Attribute  ${REDFISH_CHASSIS_URI}${CHASSIS_ID}  SerialNumber
     Valid Value  serial_number
     Rprint Vars  serial_number


 Verify Motherboard Manufacturer Field Value Populated
     [Documentation]  Check that the Motherboard manufacturer is non-blank.
     [Tags]  Verify_Motherboard_Manufacturer_Field_Value_Populated

     ${motherboard_manufacturer}=  Redfish.Get Attribute  ${REDFISH_CHASSIS_URI}${CHASSIS_ID}  Manufacturer
     Valid Value  motherboard_manufacturer
     Rprint Vars  motherboard_manufacturer


 Verify Motherboard Partnumber Field Value Populated
     [Documentation]  Check that the Motherboard partnumber is non-blank.
     [Tags]  Verify_Motherboard_Partnumber_Field_Value_Populated

     ${motherboard_part_number}=  Redfish.Get Attribute  ${REDFISH_CHASSIS_URI}${CHASSIS_ID}  PartNumber
     Valid Value  motherboard_part_number
     Rprint Vars  motherboard_part_number


 Check GPU States When Power On
     [Documentation]  Check the State of each of the GPUs
     ...              in the system.  A system may have 0-6 GPUs.
     [Tags]  Check_GPU_States_When_Power_On

     # System was powered-on in Suite Setup.
     GPU State Check


 Check GPU States When Power Off
     [Documentation]  Check the State of the GPUs when power is Off.
     [Tags]  Check_GPU_States_When_Power_Off

     Redfish Power Off
     GPU State Check


 *** Keywords ***


 Get CPU TotalCores
     [Documentation]  Return the TotalCores of a CPU.
     ...              Return 0 if this attribute is missing or NONE.
     [Arguments]      ${processor}

     # Description of Argument(s):
     # processor     The Redfish URI of a CPU (e.g.
     #               "/redfish/v1/Systems/system/Processors/cpu0").

     ${total_cores}=  Redfish.Get Attribute  ${processor}  TotalCores
     Return From Keyword If  ${total_cores} is ${NONE}  ${0}
     [Return]  ${total_cores}


 GPU State Check
     [Documentation]  The state of every "OK" GPU should be
     ...              "Absent", "Enabled", or "UnavailableOffline".

     # Select only GPUs with Health = "OK".
     ${gpus_ok}=  Filter Struct  ${gpu_info}  [('Health', 'OK')]

     FOR  ${gpu}  IN  @{gpus_ok}
         ${status}=  Redfish.Get Attribute  ${gpu}  Status
         ${state}=  Set Variable  ${status['State']}
         ${good_state}=  Evaluate
         ...  any(x in '${state}' for x in ('Absent', 'Enabled', 'UnavailableOffline'))
         Rprint Vars  gpu  state
         Run Keyword If  not ${good_state}  Fail
         ...  msg=GPU State is not Absent, Enabled, or UnavailableOffline.
     END


 Get Inventory URIs
     [Documentation]  Get and return a tuple of lists of URIs for CPU,
     ...              GPU and PowerSupplies.

     ${processor_info}=  Redfish_Utils.Enumerate Request
     ...  ${SYSTEM_BASE_URI}Processors  return_json=0

     ${cpu_info}=  Filter Struct  ${processor_info}
     ...  [('ProcessorType', 'CPU')]  regex=1

     ${gpu_info}=  Filter Struct  ${processor_info}
     ...  [('ProcessorType', 'Accelerator')]  regex=1

     ${power_supplies}=  Redfish.Get Attribute
     ...  ${REDFISH_CHASSIS_POWER_URI}  PowerSupplies

     [Return]  ${cpu_info}  ${gpu_info}  ${power_supplies}


 Verify FRU Inventory Minimums
     [Documentation]  Verify a minimum number of FRUs.
     [Arguments]  ${fru_type}  ${min_num_frus}

     # Description of Argument(s):
     # fru_type      The type of FRU (e.g. "Processors", "Memory", etc.).
     # min_num_frus  The minimum acceptable number of FRUs found.

     # A valid FRU  will have a "State" key of "Enabled" and a "Health" key
     # of "OK".

     ${status}  ${num_valid_frus}=  Run Key U  Get Num Valid FRUs \ ${fru_type}

     Rprint Vars  fru_type  num_valid_frus  min_num_frus

     Return From Keyword If  ${num_valid_frus} >= ${min_num_frus}
     Fail  Too few "${fru_type}" FRUs found, found only ${num_valid_frus}.


 Suite Teardown Execution
     [Documentation]  Do the post suite teardown.

     Redfish.Logout


 Suite Setup Execution
     [Documentation]  Do test case setup tasks.

     Redfish.Login
     Redfish Power On  stack_mode=skip

     ${cpu_info}  ${gpu_info}  ${power_supplies}=  Get Inventory URIs

     Set Suite Variable  ${cpu_info}
     Set Suite Variable  ${gpu_info}
     Set Suite Variable  ${power_supplies}


 Test Teardown Execution
     [Documentation]  Do the post test teardown.

     FFDC On Test Case Fail
	* Settings *
	Documentation Inventory of hardware FRUs under redfish.

	Resource ../../lib/bmc_redfish_resource.robot
	Resource ../../lib/bmc_redfish_utils.robot
	Resource ../../lib/openbmc_ffdc.robot
	Library ../../lib/gen_robot_valid.py

	Suite Setup Suite Setup Execution
	Suite Teardown Suite Teardown Execution
	Test Setup Printn
	Test Teardown Test Teardown Execution

	* Variables *

	# The passing criteria. Must have at least this many.
	${min_num_dimms} 2
	${min_num_cpus} 1
	${min_num_cores} 18
	${min_num_power_supplies} 1


	* Test Cases *


	Verify CPU And Core Count
	[Documentation] Get the total number of CPUs and cores in the system.
	... Verify counts are above minimums.
	[Tags] Verify_CPU_And_Core_Count

	# Select only CPUs with Health = "OK".
	${cpus_ok}= Filter Struct ${cpu_info} [('Health', 'OK')]
	${num_cpus}= Get Length ${cpus_ok}

	Rprint Vars num_cpus min_num_cpus

	# Assert that num_cpus is greater than or equal to min_num_cpus.
	Valid Range num_cpus ${min_num_cpus}

	# Get the number of cores.
	${total_num_cores}= Set Variable ${0}
	FOR ${cpu} IN @{cpus_ok}
	${cores}= Get CPU TotalCores ${cpu}
	${total_num_cores}= Evaluate $total_num_cores + ${cores}
	END

	Rprint Vars total_num_cores min_num_cores

	# Assert that total_num_cores is greater than or equal to
	# min_num_cores.
	Valid Range total_num_cores ${min_num_cores}


	Get Memory Inventory Via Redfish And Verify
	[Documentation] Get the number of DIMMs that are functional and enabled.
	[Tags] Get_Memory_Inventory_Via_Redfish_And_Verify

	Verify FRU Inventory Minimums Memory ${min_num_dimms}


	Get Memory Summary State And Verify Enabled
	[Documentation] Check that the state of the MemorySummary attribute
	... under /redfish/v1/Systems/system is 'Enabled'.
	[Tags] Get_Memory_Summary_State_And_Verify_Enabled

	${status}= Redfish.Get Attribute ${SYSTEM_BASE_URI} MemorySummary
	${memory_summary_state}= Set Variable ${status['Status']['State']}
	Rprint Vars memory_summary_state

	Should Be Equal As Strings Enabled ${memory_summary_state}
	... msg=MemorySummary State is not 'Enabled'.


	Get System Serial And Verify Populated
	[Documentation] Check that the System SerialNumber is non-blank.
	[Tags] Get_System_Serial_And_Verify_Populated

	${serial_number}= Redfish.Get Attribute ${SYSTEM_BASE_URI} SerialNumber
	Valid Value serial_number
	Rprint Vars serial_number


	Get Model And Verify Populated
	[Documentation] Check that the Model is non-blank.
	[Tags] Get_Model_And_Verify_Populated

	${model}= Redfish.Get Attribute ${SYSTEM_BASE_URI} Model
	Valid Value model
	Rprint Vars model


	Get Available Power Supplies And Verify
	[Documentation] Get the number of functional power supplies and
	... verify that it is at or above the minimum.
	[Tags] Get_Available_Power_Supplies_And_Verify

	# Select only power supplies with Health = "OK".
	${power_supplies_ok}= Filter Struct ${power_supplies} [('Health', 'OK')]

	# Count the power supplies that are Enabled or StandbyOffline.
	${total_num_supplies}= Set Variable ${0}
	FOR ${power_supply} IN @{power_supplies_ok}
	# Example of power_supply:
	# power_supply = {'@odata.id': '/redfish/v1/Chassis/chassis/Power#/PowerSupplies/0',
	# 'Manufacturer': '', 'MemberId': 'powersupply0', 'Model': '2100', 'Name':
	# 'powersupply0', 'PartNumber': 'PNPWR123', 'PowerInputWatts': 394.0,
	# 'SerialNumber': '75B12W', 'Status': {'Health': 'OK', 'State': 'Enabled'}}
	${state}= Set Variable ${power_supply['Status']['State']}
	${good_state}= Evaluate
	... any(x in '${state}' for x in ('Enabled', 'StandbyOffline'))
	Run Keyword If not ${good_state} Continue For Loop
	${total_num_supplies}= Evaluate $total_num_supplies + ${1}
	END

	Rprint Vars total_num_supplies min_num_power_supplies

	Valid Range total_num_supplies ${min_num_power_supplies}


	Get Motherboard Serial And Verify Populated
	[Documentation] Check that the Motherboard SerialNumber is non-blank.
	[Tags] Get_Motherboard_Serial_And_Verify_Populated

	${serial_number}= Redfish.Get Attribute ${REDFISH_CHASSIS_URI}${CHASSIS_ID} SerialNumber
	Valid Value serial_number
	Rprint Vars serial_number


	Verify Motherboard Manufacturer Field Value Populated
	[Documentation] Check that the Motherboard manufacturer is non-blank.
	[Tags] Verify_Motherboard_Manufacturer_Field_Value_Populated

	${motherboard_manufacturer}= Redfish.Get Attribute ${REDFISH_CHASSIS_URI}${CHASSIS_ID} Manufacturer
	Valid Value motherboard_manufacturer
	Rprint Vars motherboard_manufacturer


	Verify Motherboard Partnumber Field Value Populated
	[Documentation] Check that the Motherboard partnumber is non-blank.
	[Tags] Verify_Motherboard_Partnumber_Field_Value_Populated

	${motherboard_part_number}= Redfish.Get Attribute ${REDFISH_CHASSIS_URI}${CHASSIS_ID} PartNumber
	Valid Value motherboard_part_number
	Rprint Vars motherboard_part_number


	Check GPU States When Power On
	[Documentation] Check the State of each of the GPUs
	... in the system. A system may have 0-6 GPUs.
	[Tags] Check_GPU_States_When_Power_On

	# System was powered-on in Suite Setup.
	GPU State Check


	Check GPU States When Power Off
	[Documentation] Check the State of the GPUs when power is Off.
	[Tags] Check_GPU_States_When_Power_Off

	Redfish Power Off
	GPU State Check


	* Keywords *


	Get CPU TotalCores
	[Documentation] Return the TotalCores of a CPU.
	... Return 0 if this attribute is missing or NONE.
	[Arguments] ${processor}

	# Description of Argument(s):
	# processor The Redfish URI of a CPU (e.g.
	# "/redfish/v1/Systems/system/Processors/cpu0").

	${total_cores}= Redfish.Get Attribute ${processor} TotalCores
	Return From Keyword If ${total_cores} is ${NONE} ${0}
	[Return] ${total_cores}


	GPU State Check
	[Documentation] The state of every "OK" GPU should be
	... "Absent", "Enabled", or "UnavailableOffline".

	# Select only GPUs with Health = "OK".
	${gpus_ok}= Filter Struct ${gpu_info} [('Health', 'OK')]

	FOR ${gpu} IN @{gpus_ok}
	${status}= Redfish.Get Attribute ${gpu} Status
	${state}= Set Variable ${status['State']}
	${good_state}= Evaluate
	... any(x in '${state}' for x in ('Absent', 'Enabled', 'UnavailableOffline'))
	Rprint Vars gpu state
	Run Keyword If not ${good_state} Fail
	... msg=GPU State is not Absent, Enabled, or UnavailableOffline.
	END


	Get Inventory URIs
	[Documentation] Get and return a tuple of lists of URIs for CPU,
	... GPU and PowerSupplies.

	${processor_info}= Redfish_Utils.Enumerate Request
	... ${SYSTEM_BASE_URI}Processors return_json=0

	${cpu_info}= Filter Struct ${processor_info}
	... [('ProcessorType', 'CPU')] regex=1

	${gpu_info}= Filter Struct ${processor_info}
	... [('ProcessorType', 'Accelerator')] regex=1

	${power_supplies}= Redfish.Get Attribute
	... ${REDFISH_CHASSIS_POWER_URI} PowerSupplies

	[Return] ${cpu_info} ${gpu_info} ${power_supplies}


	Verify FRU Inventory Minimums
	[Documentation] Verify a minimum number of FRUs.
	[Arguments] ${fru_type} ${min_num_frus}

	# Description of Argument(s):
	# fru_type The type of FRU (e.g. "Processors", "Memory", etc.).
	# min_num_frus The minimum acceptable number of FRUs found.

	# A valid FRU will have a "State" key of "Enabled" and a "Health" key
	# of "OK".

	${status} ${num_valid_frus}= Run Key U Get Num Valid FRUs \ ${fru_type}

	Rprint Vars fru_type num_valid_frus min_num_frus

	Return From Keyword If ${num_valid_frus} >= ${min_num_frus}
	Fail Too few "${fru_type}" FRUs found, found only ${num_valid_frus}.


	Suite Teardown Execution
	[Documentation] Do the post suite teardown.

	Redfish.Logout


	Suite Setup Execution
	[Documentation] Do test case setup tasks.

	Redfish.Login
	Redfish Power On stack_mode=skip

	${cpu_info} ${gpu_info} ${power_supplies}= Get Inventory URIs

	Set Suite Variable ${cpu_info}
	Set Suite Variable ${gpu_info}
	Set Suite Variable ${power_supplies}


	Test Teardown Execution
	[Documentation] Do the post test teardown.

	FFDC On Test Case Fail