blob: 3dc8d793296b18eee39fed1a63e22826fc4d5005 [file] [log] [blame]
*** Settings ***
Documentation REST test Error callout association.
Resource ../../../lib/bmc_redfish_resource.robot
Resource ../../../lib/bmc_redfish_utils.robot
Resource ../../../lib/connection_client.robot
Resource ../../../lib/openbmc_ffdc.robot
Resource ../../../lib/utils.robot
Resource ../../../lib/state_manager.robot
Resource ../../../lib/boot_utils.robot
Suite Setup Suite Setup Execution
Suite Teardown Suite Teardown Execution
Test Setup Test Setup Execution
Test Teardown FFDC On Test Case Fail
***Variables***
${target_device_path} /sys/devices/platform/gpio-fsi/fsi0/slave@00:00/raw
${stack_mode} skip
*** Test Cases ***
Create Test Error Callout And Verify
[Documentation] Create error log callout and verify via REST.
[Tags] Create_Test_Error_Callout_And_Verify
Create Test Error With Callout
Verify Test Error Log And Callout
Create Test Error Callout And Verify AdditionalData
[Documentation] Create Test Error Callout And Verify AdditionalData.
[Tags] Create_Test_Error_Callout_And_Verify_AdditionalData
# Test error log entry example:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00",
# "CALLOUT_ERRNO_TEST=0",
# "DEV_ADDR=0x0DEADEAD"
# ]
Create Test Error With Callout
${elog_entry}= Get Elog URL List
${resp}= OpenBMC Get Request ${elog_entry[0]}
${jsondata}= To JSON ${resp.content}
List Should Contain Value
... ${jsondata["data"]["AdditionalData"]} CALLOUT_DEVICE_PATH_TEST=${target_device_path}
List Should Contain Value ${jsondata["data"]["AdditionalData"]} DEV_ADDR=0x0DEADEAD
Create Test Error Callout And Verify Associations
[Documentation] Create test error callout and verify Associations.
[Tags] Create_Test_Error_Callout_And_Verify_Associations
# Test error log association entry example:
# "Associations": [
# [
# "callout",
# "fault",
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# ]
Create Test Error With Callout
${elog_entry}= Get Elog URL List
${resp}= OpenBMC Get Request ${elog_entry[0]}
${jsondata}= To JSON ${resp.content}
List Should Contain Value ${jsondata["data"]["Associations"][0]} callout
List Should Contain Value ${jsondata["data"]["Associations"][0]} fault
List Should Contain Value
... ${jsondata["data"]["Associations"][0]}
... /xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0
Create Test Error Callout And Delete
[Documentation] Create Test Error Callout And Delete.
[Tags] Create_Test_Error_Callout_And_Delete
# Test error log entry example:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00",
# "CALLOUT_ERRNO_TEST=0",
# "DEV_ADDR=0x0DEADEAD"
# ],
# "Id": 1,
# "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1487747332528,
# "Associations": [
# [
# "callout",
# "fault",
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# ]
# },
# "/xyz/openbmc_project/logging/entry/1/callout": {
# "endpoints": [
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# },
Create Test Error With Callout
${elog_entry}= Get Elog URL List
Delete Error Log Entry ${elog_entry[0]}
${resp}= OpenBMC Get Request ${elog_entry[0]}/callout
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Create Two Test Error Callout And Delete
[Documentation] Create Two Test Error Callout And Delete.
[Tags] Create_Two_Test_Error_Callout_And_Delete
# Test error log entry example:
# "/xyz/openbmc_project/logging/entry/1": {
# "AdditionalData": [
# "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00",
# "CALLOUT_ERRNO_TEST=0",
# "DEV_ADDR=0x0DEADEAD"
# ],
# "Id": 1,
# "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1487747332528,
# "Associations": [
# [
# "callout",
# "fault",
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# ]
# },
# "/xyz/openbmc_project/logging/entry/1/callout": {
# "endpoints": [
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# },
# "/xyz/openbmc_project/logging/entry/2": {
# "AdditionalData": [
# "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00",
# "CALLOUT_ERRNO_TEST=0",
# "DEV_ADDR=0x0DEADEAD"
# ],
# "Id": 2,
# "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1487747332528,
# "Associations": [
# [
# "callout",
# "fault",
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# ]
# },
# "/xyz/openbmc_project/logging/entry/2/callout": {
# "endpoints": [
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# },
# Create two error logs.
Create Test Error With Callout
Create Test Error With Callout
# Delete entry/2 elog entry.
${elog_entry}= Get Elog URL List
Delete Error Log Entry ${elog_entry[1]}
# Verify if entry/1 exist and entry/2 is deleted.
${resp}= OpenBMC Get Request ${elog_entry[0]}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
${resp}= OpenBMC Get Request ${elog_entry[1]}
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
Create Test Error Callout And Verify LED
[Documentation] Create an error log callout and verify respective
... LED state.
[Tags] Create_Test_Error_Callout_And_Verify_LED
Create Test Error With Callout
${resp}= Get LED State XYZ cpu0_fault
Should Be Equal ${resp} ${1}
Set Resolved Field And Verify Callout Deletion
[Documentation] Set the "Resolved" error log and verify callout is deleted
[Tags] Set_Resolved_Field_And_Verify_Callout_Deletion
Delete All Error Logs
Create Test Error With Callout
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${resp}= OpenBMC Get Request ${elog_entry[0]}
${jsondata}= To JSON ${resp.content}
Should Contain ${jsondata["data"]["Associations"][0]} callout
# Set the error log field "Resolved".
# By doing so, the callout object should get deleted automatically.
${valueDict}= Create Dictionary data=${1}
OpenBMC Put Request ${elog_entry[0]}/attr/Resolved data=${valueDict}
# Verify if the callout entry is deleted.
${resp}= OpenBMC Get Request ${elog_entry[0]}/callout
Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND}
*** Keywords ***
Callout Test Binary Exist
[Documentation] Verify existence of prerequisite callout-test.
Open Connection And Log In
${out} ${stderr}= Execute Command
... which /tmp/tarball/bin/callout-test return_stderr=True
Should Be Empty ${stderr}
Should Contain ${out} callout-test
Create Test Error With Callout
[Documentation] Generate test error log with callout for CPU0.
# Test error log entry example:
# "/xyz/openbmc_project/logging/entry/4": {
# "AdditionalData": [
# "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00",
# "CALLOUT_ERRNO_TEST=0",
# "DEV_ADDR=0x0DEADEAD"
# ],
# "Id": 4,
# "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout",
# "Resolved": 0,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1487747332528,
# "Associations": [
# [
# "callout",
# "fault",
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# ]
# },
# "/xyz/openbmc_project/logging/entry/4/callout": {
# "endpoints": [
# "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0"
# ]
# },
BMC Execute Command
... /tmp/tarball/bin/callout-test ${target_device_path}
Verify Test Error Log And Callout
[Documentation] Verify test error log entries.
${elog_entry}= Get Elog URL List
${resp}= OpenBMC Get Request ${elog_entry[0]}
${json}= To JSON ${resp.content}
Should Be Equal ${json["data"]["Message"]}
... example.xyz.openbmc_project.Example.Elog.TestCallout
Should Be Equal ${json["data"]["Severity"]}
... xyz.openbmc_project.Logging.Entry.Level.Error
${content}= Read Attribute ${elog_entry[0]}/callout endpoints
Should Be Equal ${content[0]}
... /xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0
Test Setup Execution
[Documentation] Do test case setup tasks.
${status}= Run Keyword And Return Status Callout Test Binary Exist
Run Keyword If ${status} == ${False} Install Tarball
Delete All Error Logs
Install Tarball
[Documentation] Install tarball on BMC.
Run Keyword If '${DEBUG_TARBALL_PATH}' == '${EMPTY}' Return from Keyword
BMC Execute Command rm -rf /tmp/tarball
Install Debug Tarball On BMC ${DEBUG_TARBALL_PATH}
Suite Setup Execution
[Documentation] Do test case setup tasks.
Redfish.Login
Redfish Purge Event Log
Redfish Power On stack_mode=skip quiet=1
${status}= Run Keyword And Return Status Logging Test Binary Exist
Run Keyword If ${status} == ${False} Install Tarball
Suite Teardown Execution
[Documentation] Do the post suite teardown.
Redfish.Logout