| *** Settings *** |
| Documentation This suite is for testing general IPMI functions. |
| |
| Resource ../../lib/ipmi_client.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/boot_utils.robot |
| Resource ../../lib/utils.robot |
| Resource ../../lib/bmc_network_utils.robot |
| Resource ../../lib/logging_utils.robot |
| Library ../../lib/ipmi_utils.py |
| Variables ../../data/ipmi_raw_cmd_table.py |
| Library ../../lib/gen_misc.py |
| |
| Test Teardown FFDC On Test Case Fail |
| |
| *** Variables *** |
| |
| ${new_mc_id}= HOST |
| ${allowed_temp_diff}= ${1} |
| ${allowed_power_diff}= ${10} |
| |
| *** Test Cases *** |
| |
| Verify IPMI SEL Version |
| [Documentation] Verify IPMI SEL's version info. |
| [Tags] Verify_IPMI_SEL_Version |
| |
| ${version_info}= Get IPMI SEL Setting Version |
| ${setting_status}= Fetch From Left ${version_info} ( |
| ${setting_status}= Evaluate $setting_status.replace(' ','') |
| |
| Should Be True ${setting_status} >= 1.5 |
| Should Contain ${version_info} v2 compliant case_insensitive=True |
| |
| |
| Verify Empty SEL |
| [Documentation] Verify empty SEL list. |
| [Tags] Verify_Empty_SEL |
| |
| Delete Error Logs And Verify |
| |
| ${resp}= Run IPMI Standard Command sel list |
| Should Contain ${resp} SEL has no entries case_insensitive=True |
| |
| |
| Verify Supported Cipher List |
| [Documentation] Execute all supported cipher levels and verify. |
| [Tags] Verify_Supported_Cipher_List |
| |
| :FOR ${cipher_level} IN @{valid_cipher_list} |
| \ ${status}= Execute IPMI Command With Cipher ${cipher_level} |
| \ Should Be Equal ${status} ${0} |
| |
| |
| Verify Unsupported Cipher List |
| [Documentation] Execute all unsupported cipher levels and verify error. |
| [Tags] Verify_Unsupported_Cipher_List |
| |
| :FOR ${cipher_level} IN @{unsupported_cipher_list} |
| \ ${status}= Execute IPMI Command With Cipher ${cipher_level} |
| \ Should Be Equal ${status} ${1} |
| |
| |
| Verify Supported Cipher List Via Lan Print |
| [Documentation] Verify supported cipher list via IPMI lan print command. |
| [Tags] Verify_Supported_Cipher_List_Via_Lan_Print |
| |
| ${network_info_dict}= Get Lan Print Dict |
| # Example 'RMCP+ Cipher Suites' entry: 3,17 |
| ${cipher_list}= Evaluate |
| ... map(int, $network_info_dict['RMCP+ Cipher Suites'].split(',')) |
| Lists Should Be Equal ${cipher_list} ${valid_cipher_list} |
| |
| |
| Verify Supported Cipher Via Getciphers |
| [Documentation] Verify supported chiper list via IPMI getciphers command. |
| [Tags] Verify_Supported_Cipher_Via_Getciphers |
| |
| ${output}= Run IPMI Standard Command channel getciphers ipmi |
| # Example of getciphers command output: |
| # ID IANA Auth Alg Integrity Alg Confidentiality Alg |
| # 3 N/A hmac_sha1 hmac_sha1_96 aes_cbc_128 |
| # 17 N/A hmac_sha256 sha256_128 aes_cbc_128 |
| |
| ${report}= Outbuf To Report ${output} |
| # Make list from the 'id' column in the report. |
| ${cipher_list}= Evaluate [int(x['id']) for x in $report] |
| Lists Should Be Equal ${cipher_list} ${valid_cipher_list} |
| |
| |
| Verify Disabling And Enabling IPMI Via Host |
| [Documentation] Verify disabling and enabling IPMI via host. |
| [Tags] Verify_Disabling_And_Enabling_IPMI_Via_Host |
| [Teardown] Run Inband IPMI Standard Command lan set 1 access on |
| |
| # Disable IPMI and verify |
| Run Inband IPMI Standard Command lan set 1 access off |
| Run Keyword and Expect Error *Unable to establish IPMI* |
| ... Run External IPMI Standard Command lan print |
| |
| # Enable IPMI and verify |
| Run Inband IPMI Standard Command lan set 1 access on |
| ${lan_print_output}= Run External IPMI Standard Command lan print |
| |
| ${openbmc_host_name} ${openbmc_ip} ${openbmc_short_name}= |
| ... Get Host Name IP host=${OPENBMC_HOST} short_name=1 |
| Should Contain ${lan_print_output} ${openbmc_ip} |
| |
| |
| Set Asset Tag With Valid String Length |
| [Documentation] Set asset tag with valid string length and verify. |
| [Tags] Set_Asset_Tag_With_Valid_String_Length |
| |
| # Allowed MAX characters length for asset tag name is 63. |
| ${random_string}= Generate Random String 63 |
| Run Keyword Run IPMI Standard Command dcmi set_asset_tag ${random_string} |
| |
| ${asset_tag}= Run Keyword Run IPMI Standard Command dcmi asset_tag |
| Should Contain ${asset_tag} ${random_string} |
| |
| |
| Set Asset Tag With Invalid String Length |
| [Documentation] Verify error while setting invalid asset tag via IPMI. |
| [Tags] Set_Asset_Tag_With_Invalid_String_Length |
| |
| # Any string more than 63 character is invalid for asset tag. |
| ${random_string}= Generate Random String 64 |
| |
| ${resp}= Run Keyword And Expect Error * Run IPMI Standard Command |
| ... dcmi set_asset_tag ${random_string} |
| Should Contain ${resp} Parameter out of range ignore_case=True |
| |
| |
| Set Asset Tag With Valid String Length Via REST |
| [Documentation] Set valid asset tag via REST and verify. |
| [Tags] Set_Asset_Tag_With_Valid_String_Length_Via_REST |
| |
| ${random_string}= Generate Random String 63 |
| ${args}= Create Dictionary data=${random_string} |
| Write Attribute /xyz/openbmc_project/inventory/system AssetTag |
| ... data=${args} |
| |
| ${asset_tag}= Read Attribute /xyz/openbmc_project/inventory/system |
| ... AssetTag |
| Should Be Equal As Strings ${asset_tag} ${random_string} |
| |
| |
| Verify Get And Set Management Controller ID String |
| [Documentation] Verify get and set management controller ID string. |
| [Tags] Verify_Get_And_Set_Management_Controller_ID_String |
| |
| # Get the value of the managemment controller ID string. |
| # Example: |
| # Get Management Controller Identifier String: witherspoon |
| |
| ${cmd_output}= Run IPMI Standard Command dcmi get_mc_id_string |
| |
| # Extract management controller ID from cmd_output. |
| ${initial_mc_id}= Fetch From Right ${cmd_output} :${SPACE} |
| |
| # Set the management controller ID string to other value. |
| # Example: |
| # Set Management Controller Identifier String Command: HOST |
| |
| Set Management Controller ID String ${new_mc_id} |
| |
| # Get the management controller ID and verify. |
| Get Management Controller ID String And Verify ${new_mc_id} |
| |
| # Set the value back to the initial value and verify. |
| Set Management Controller ID String ${initial_mc_id} |
| |
| # Get the management controller ID and verify. |
| Get Management Controller ID String And Verify ${initial_mc_id} |
| |
| |
| Test Management Controller ID String Status via IPMI |
| [Documentation] Test management controller ID string status via IPMI. |
| [Tags] Test_Management_Controller_ID_String_Status_via_IPMI |
| |
| # Disable management controller ID string status via IPMI and verify. |
| Run IPMI Standard Command dcmi set_conf_param dhcp_config 0x00 |
| Verify Management Controller ID String Status disable |
| |
| # Enable management controller ID string status via IPMI and verify. |
| Run IPMI Standard Command dcmi set_conf_param dhcp_config 0x01 |
| Verify Management Controller ID String Status enable |
| |
| |
| Test Management Controller ID String Status via Raw IPMI |
| [Documentation] Test management controller ID string status via IPMI. |
| [Tags] Test_Management_Controller_ID_String_Status_via_Raw_IPMI |
| |
| # Disable management controller ID string status via raw IPMI and verify. |
| Run IPMI Standard Command raw ${IPMI_RAW_CMD['conf_param']['Disabled'][0]} |
| Verify Management Controller ID String Status disable |
| |
| # Enable management controller ID string status via raw IPMI and verify. |
| Run IPMI Standard Command raw ${IPMI_RAW_CMD['conf_param']['Enabled'][0]} |
| Verify Management Controller ID String Status enable |
| |
| |
| Verify Chassis Identify via IPMI |
| [Documentation] Verify "chassis identify" using IPMI command. |
| [Tags] Verify_Chassis_Identify_via_IPMI |
| |
| # Set to default "chassis identify" and verify that LED blinks for 15s. |
| Run IPMI Standard Command chassis identify |
| Verify Identify LED State Blink |
| |
| Sleep 15s |
| Verify Identify LED State Off |
| |
| # Set "chassis identify" to 10s and verify that the LED blinks for 10s. |
| Run IPMI Standard Command chassis identify 10 |
| Verify Identify LED State Blink |
| |
| Sleep 10s |
| Verify Identify LED State Off |
| |
| |
| Verify Chassis Identify Off And Force Identify On via IPMI |
| [Documentation] Verify "chassis identify" off |
| ... and "force identify on" via IPMI. |
| [Tags] Verify_Chassis_Identify_Off_And_Force_Identify_On_via_IPMI |
| |
| # Set the LED to "Force Identify On". |
| Run IPMI Standard Command chassis identify force |
| Verify Identify LED State Blink |
| |
| # Set "chassis identify" to 0 and verify that the LED turns off. |
| Run IPMI Standard Command chassis identify 0 |
| Verify Identify LED State Off |
| |
| |
| Test Watchdog Reset Via IPMI And Verify Using REST |
| [Documentation] Test watchdog reset via IPMI and verify using REST. |
| [Tags] Test_Watchdog_Reset_Via_IPMI_And_Verify_Using_REST |
| |
| Initiate Host Boot |
| |
| Set Watchdog Enabled Using REST ${1} |
| |
| Watchdog Object Should Exist |
| |
| # Resetting the watchdog via IPMI. |
| Run IPMI Standard Command mc watchdog reset |
| |
| # Verify the watchdog is reset using REST after an interval of 1000ms. |
| Sleep 1000ms |
| ${watchdog_time_left}= |
| ... Read Attribute ${HOST_WATCHDOG_URI} TimeRemaining |
| Should Be True |
| ... ${watchdog_time_left}<${1200000} and ${watchdog_time_left}>${2000} |
| ... msg=Watchdog timer didn't reset. |
| |
| |
| Test Watchdog Off Via IPMI And Verify Using REST |
| [Documentation] Test watchdog off via IPMI and verify using REST. |
| [Tags] Test_Watchdog_Off_Via_IPMI_And_Verify_Using_REST |
| |
| Initiate Host Boot |
| |
| Set Watchdog Enabled Using REST ${1} |
| |
| Watchdog Object Should Exist |
| |
| # Turn off the watchdog via IPMI. |
| Run IPMI Standard Command mc watchdog off |
| |
| # Verify the watchdog is off using REST |
| ${watchdog_state}= Read Attribute ${HOST_WATCHDOG_URI} Enabled |
| Should Be Equal ${watchdog_state} ${0} |
| ... msg=msg=Verification failed for watchdog off check. |
| |
| |
| Test Ambient Temperature Via IPMI |
| [Documentation] Test ambient temperature via IPMI and verify using REST. |
| [Tags] Test_Ambient_Temperature_Via_IPMI |
| |
| # Entity ID Entity Instance Temp. Readings |
| # Inlet air temperature(40h) 1 +19 C |
| # CPU temperature sensors(41h) 5 +51 C |
| # CPU temperature sensors(41h) 6 +50 C |
| # CPU temperature sensors(41h) 7 +50 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 9 +50 C |
| # CPU temperature sensors(41h) 10 +48 C |
| # CPU temperature sensors(41h) 11 +49 C |
| # CPU temperature sensors(41h) 12 +47 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 16 +51 C |
| # CPU temperature sensors(41h) 24 +50 C |
| # CPU temperature sensors(41h) 32 +43 C |
| # CPU temperature sensors(41h) 40 +43 C |
| # Baseboard temperature sensors(42h) 1 +35 C |
| |
| ${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10 |
| Should Contain ${temp_reading} Inlet air temperature |
| ... msg="Unable to get inlet temperature via DCMI". |
| ${ambient_temp_line}= |
| ... Get Lines Containing String ${temp_reading} |
| ... Inlet air temperature case-insensitive |
| |
| ${ambient_temp_ipmi}= Fetch From Right ${ambient_temp_line} + |
| ${ambient_temp_ipmi}= Remove String ${ambient_temp_ipmi} ${SPACE}C |
| |
| ${ambient_temp_rest}= Read Attribute |
| ... ${SENSORS_URI}temperature/ambient Value |
| |
| # Example of ambient temperature via REST |
| # "CriticalAlarmHigh": 0, |
| # "CriticalAlarmLow": 0, |
| # "CriticalHigh": 35000, |
| # "CriticalLow": 0, |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 21775, |
| # "WarningAlarmHigh": 0, |
| # "WarningAlarmLow": 0, |
| # "WarningHigh": 25000, |
| # "WarningLow": 0 |
| |
| # Get temperature value based on scale i.e. Value * (10 power Scale Value) |
| # e.g. from above case 21775 * (10 power -3) = 21775/1000 |
| |
| ${ambient_temp_rest}= Evaluate ${ambient_temp_rest}/1000 |
| ${ipmi_rest_temp_diff}= |
| ... Evaluate abs(${ambient_temp_rest} - ${ambient_temp_ipmi}) |
| |
| Should Be True ${ipmi_rest_temp_diff} <= ${allowed_temp_diff} |
| ... msg=Ambient temperature above allowed threshold ${allowed_temp_diff}. |
| |
| |
| Verify Get DCMI Capabilities |
| [Documentation] Verify get DCMI capabilities command output. |
| [Tags] Verify_Get_DCMI_Capabilities |
| |
| ${cmd_output}= Run IPMI Standard Command dcmi discover |
| |
| @{supported_capabilities}= Create List |
| # Supported DCMI capabilities: |
| ... Mandatory platform capabilties |
| ... Optional platform capabilties |
| ... Power management available |
| ... Managebility access capabilties |
| ... In-band KCS channel available |
| # Mandatory platform attributes: |
| ... 200 SEL entries |
| ... SEL automatic rollover is enabled |
| # Optional Platform Attributes: |
| ... Slave address of device: 0h (8bits)(Satellite/External controller) |
| ... Channel number is 0h (Primary BMC) |
| ... Device revision is 0 |
| # Manageability Access Attributes: |
| ... Primary LAN channel number: 1 is available |
| ... Secondary LAN channel is not available for OOB |
| ... No serial channel is available |
| |
| :FOR ${capability} IN @{supported_capabilities} |
| \ Should Contain ${cmd_output} ${capability} ignore_case=True |
| ... msg=Supported DCMI capabilities not present. |
| |
| |
| Test Power Reading Via IPMI With Host Off |
| [Documentation] Test power reading via IPMI with host off state and |
| ... verify using REST. |
| [Tags] Test_Power_Reading_Via_IPMI_With_Host_Off |
| |
| REST Power Off stack_mode=skip quiet=1 |
| |
| Wait Until Keyword Succeeds 1 min 20 sec Verify Power Reading |
| |
| |
| Test Power Reading Via IPMI With Host Booted |
| [Documentation] Test power reading via IPMI with host booted state and |
| ... verify using REST. |
| [Tags] Test_Power_Reading_Via_IPMI_With_Host_Booted |
| |
| REST Power On stack_mode=skip quiet=1 |
| |
| # For a good power reading take a 3 samples for 15 seconds interval and |
| # average it out. |
| |
| Wait Until Keyword Succeeds 1 min 20 sec Verify Power Reading |
| |
| |
| Test Power Reading Via IPMI Raw Command |
| [Documentation] Test power reading via IPMI raw command and verify |
| ... using REST. |
| [Tags] Test_Power_Reading_Via_IPMI_Raw_Command |
| |
| # Response data structure of power reading command output via IPMI. |
| # 1 Completion Code. Refer to section 8, DCMI Completion Codes. |
| # 2 Group Extension Identification = DCh |
| # 3:4 Current Power in watts |
| |
| REST Power On stack_mode=skip quiet=1 |
| |
| Wait Until Keyword Succeeds 1 min 20 sec Verify Power Reading Via Raw Command |
| |
| |
| Test Baseboard Temperature Via IPMI |
| [Documentation] Test baseboard temperature via IPMI and verify using REST. |
| [Tags] Test_Baseboard_Temperature_Via_IPMI |
| |
| # Example of IPMI dcmi get_temp_reading output: |
| # Entity ID Entity Instance Temp. Readings |
| # Inlet air temperature(40h) 1 +19 C |
| # CPU temperature sensors(41h) 5 +51 C |
| # CPU temperature sensors(41h) 6 +50 C |
| # CPU temperature sensors(41h) 7 +50 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 9 +50 C |
| # CPU temperature sensors(41h) 10 +48 C |
| # CPU temperature sensors(41h) 11 +49 C |
| # CPU temperature sensors(41h) 12 +47 C |
| # CPU temperature sensors(41h) 8 +50 C |
| # CPU temperature sensors(41h) 16 +51 C |
| # CPU temperature sensors(41h) 24 +50 C |
| # CPU temperature sensors(41h) 32 +43 C |
| # CPU temperature sensors(41h) 40 +43 C |
| # Baseboard temperature sensors(42h) 1 +35 C |
| |
| ${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10 |
| Should Contain ${temp_reading} Baseboard temperature sensors |
| ... msg="Unable to get baseboard temperature via DCMI". |
| ${baseboard_temp_line}= |
| ... Get Lines Containing String ${temp_reading} |
| ... Baseboard temperature case-insensitive=True |
| |
| ${baseboard_temp_ipmi}= Fetch From Right ${baseboard_temp_line} + |
| ${baseboard_temp_ipmi}= Remove String ${baseboard_temp_ipmi} ${SPACE}C |
| |
| ${baseboard_temp_rest}= Read Attribute |
| ... /xyz/openbmc_project/sensors/temperature/pcie Value |
| ${baseboard_temp_rest}= Evaluate ${baseboard_temp_rest}/1000 |
| |
| Should Be True |
| ... ${baseboard_temp_rest} - ${baseboard_temp_ipmi} <= ${allowed_temp_diff} |
| ... msg=Baseboard temperature above allowed threshold ${allowed_temp_diff}. |
| |
| |
| Retrieve Default Gateway Via IPMI And Verify Using REST |
| [Documentation] Retrieve default gateway from LAN print using IPMI. |
| [Tags] Retrieve_Default_Gateway_Via_IPMI_And_Verify_Using_REST |
| |
| # Fetch "Default Gateway" from IPMI LAN print. |
| ${default_gateway_ipmi}= Fetch Details From LAN Print Default Gateway IP |
| |
| # Verify "Default Gateway" using REST. |
| Read Attribute ${NETWORK_MANAGER}/config DefaultGateway |
| ... expected_value=${default_gateway_ipmi} |
| |
| |
| Retrieve MAC Address Via IPMI And Verify Using REST |
| [Documentation] Retrieve MAC Address from LAN print using IPMI. |
| [Tags] Retrieve_MAC_Address_Via_IPMI_And_Verify_Using_REST |
| |
| # Fetch "MAC Address" from IPMI LAN print. |
| ${mac_address_ipmi}= Fetch Details From LAN Print MAC Address |
| |
| # Verify "MAC Address" using REST. |
| ${mac_address_rest}= Get BMC MAC Address |
| Should Be Equal ${mac_address_ipmi} ${mac_address_rest} |
| ... msg=Verification of MAC address from lan print using IPMI failed. |
| |
| |
| Retrieve Network Mode Via IPMI And Verify Using REST |
| [Documentation] Retrieve network mode from LAN print using IPMI. |
| [Tags] Retrieve_Network_Mode_Via_IPMI_And_Verify_Using_REST |
| |
| # Fetch "Mode" from IPMI LAN print. |
| ${network_mode_ipmi}= Fetch Details From LAN Print Source |
| |
| # Verify "Mode" using REST. |
| ${network_mode_rest}= Read Attribute |
| ... ${NETWORK_MANAGER}/eth0 DHCPEnabled |
| Run Keyword If '${network_mode_ipmi}' == 'Static Address' |
| ... Should Be Equal ${network_mode_rest} ${0} |
| ... msg=Verification of network setting failed. |
| ... ELSE IF '${network_mode_ipmi}' == 'DHCP' |
| ... Should Be Equal ${network_mode_rest} ${1} |
| ... msg=Verification of network setting failed. |
| |
| |
| Retrieve IP Address Via IPMI And Verify With BMC Details |
| [Documentation] Retrieve IP address from LAN print using IPMI. |
| [Tags] Retrieve_IP_Address_Via_IPMI_And_Verify_With_BMC_Details |
| |
| # Fetch "IP Address" from IPMI LAN print. |
| ${ip_addr_ipmi}= Fetch Details From LAN Print IP Address |
| |
| # Verify the IP address retrieved via IPMI with BMC IPs. |
| ${ip_address_rest}= Get BMC IP Info |
| Validate IP On BMC ${ip_addr_ipmi} ${ip_address_rest} |
| |
| |
| Verify Get Device ID |
| [Documentation] Verify get device ID command output. |
| [Tags] Verify_Get_Device_ID |
| |
| # Example of get device ID command output: |
| # Device ID : 0 |
| # Device Revision : 0 |
| # Firmware Revision : 2.01 |
| # IPMI Version : 2.0 |
| # Manufacturer ID : 42817 |
| # Manufacturer Name : Unknown (0xA741) |
| # Product ID : 16975 (0x424f) |
| # Product Name : Unknown (0x424F) |
| # Device Available : yes |
| # Provides Device SDRs : yes |
| # Additional Device Support : |
| # Sensor Device |
| # SEL Device |
| # FRU Inventory Device |
| # Chassis Device |
| # Aux Firmware Rev Info : |
| # 0x04 |
| # 0x38 |
| # 0x00 |
| # 0x03 |
| |
| ${mc_info}= Get MC Info |
| |
| Should Be Equal ${mc_info['device_id']} 0 |
| Should Be Equal ${mc_info['device_revision']} 0 |
| |
| # Get firmware revision from mc info command output i.e. 2.01 |
| ${ipmi_fw_major_version} ${ipmi_fw_minor_version}= |
| ... Split String ${mc_info['firmware_revision']} . |
| # Convert minor firmware version from BCD format to integer. i.e. 01 to 1 |
| ${ipmi_fw_minor_version}= Convert To Integer ${ipmi_fw_minor_version} |
| |
| # Get BMC version from BMC CLI i.e. 2.2 from "v2.2-253-g00050f1" |
| ${bmc_version_full}= Get BMC Version |
| ${bmc_version}= |
| ... Remove String Using Regexp ${bmc_version_full} ^[^0-9]+ [^0-9\.].* |
| |
| # Get major and minor version from BMC version i.e. 2 and 1 from 2.1 |
| ${bmc_major_version} ${bmc_minor_version}= |
| ... Split String ${bmc_version} . |
| |
| Should Be Equal As Strings ${ipmi_fw_major_version} ${bmc_major_version} |
| ... msg=Major version mis-match. |
| Should Be Equal As Strings ${ipmi_fw_minor_version} ${bmc_minor_version} |
| ... msg=Minor version mis-match. |
| |
| Should Be Equal ${mc_info['ipmi_version']} 2.0 |
| |
| # TODO: Verify Manufacturer and Product IDs directly from json file. |
| # Reference : openbmc/openbmc-test-automation#1244 |
| Should Be Equal ${mc_info['manufacturer_id']} 42817 |
| Should Be Equal ${mc_info['product_id']} 16975 (0x424f) |
| |
| Should Be Equal ${mc_info['device_available']} yes |
| Should Be Equal ${mc_info['provides_device_sdrs']} yes |
| Should Contain ${mc_info['additional_device_support']} Sensor Device |
| Should Contain ${mc_info['additional_device_support']} SEL Device |
| Should Contain |
| ... ${mc_info['additional_device_support']} FRU Inventory Device |
| Should Contain ${mc_info['additional_device_support']} Chassis Device |
| |
| # Auxiliary revision data verification. |
| ${aux_version}= Get Aux Version ${bmc_version_full} |
| |
| # From aux_firmware_rev_info field ['0x04', '0x38', '0x00', '0x03'] |
| ${bmc_aux_version}= Catenate |
| ... SEPARATOR= |
| ... ${mc_info['aux_firmware_rev_info'][0][2:]} |
| ... ${mc_info['aux_firmware_rev_info'][1][2:]} |
| ... ${mc_info['aux_firmware_rev_info'][2][2:]} |
| ... ${mc_info['aux_firmware_rev_info'][3][2:]} |
| |
| Should Be Equal As Integers |
| ... ${bmc_aux_version} ${aux_version} |
| ... msg=BMC aux version ${bmc_aux_version} does not match expected value of ${aux_version}. |
| |
| |
| Verify SDR Info |
| [Documentation] Verify sdr info command output. |
| [Tags] Verify_SDR_Info |
| |
| # Example of SDR info command output: |
| # SDR Version : 0x51 |
| # Record Count : 216 |
| # Free Space : unspecified |
| # Most recent Addition : |
| # Most recent Erase : |
| # SDR overflow : no |
| # SDR Repository Update Support : unspecified |
| # Delete SDR supported : no |
| # Partial Add SDR supported : no |
| # Reserve SDR repository supported : no |
| # SDR Repository Alloc info supported : no |
| |
| ${sdr_info}= Get SDR Info |
| Should Be Equal ${sdr_info['sdr_version']} 0x51 |
| |
| # Get sensor count from "sdr elist all" command output. |
| ${sensor_count}= Get Sensor Count |
| Should Be Equal As Strings |
| ... ${sdr_info['record_count']} ${sensor_count} |
| |
| Should Be Equal ${sdr_info['free_space']} unspecified |
| Should Be Equal ${sdr_info['most_recent_addition']} ${EMPTY} |
| Should Be Equal ${sdr_info['most_recent_erase']} ${EMPTY} |
| Should Be Equal ${sdr_info['sdr_overflow']} no |
| Should Be Equal ${sdr_info['sdr_repository_update_support']} unspecified |
| Should Be Equal ${sdr_info['delete_sdr_supported']} no |
| Should Be Equal ${sdr_info['partial_add_sdr_supported']} no |
| Should Be Equal ${sdr_info['reserve_sdr_repository_supported']} no |
| Should Be Equal ${sdr_info['sdr_repository_alloc_info_supported']} no |
| |
| |
| Test Valid IPMI Channels Supported |
| [Documentation] Verify IPMI channels supported on a given system. |
| [Tags] Test_Valid_IPMI_Channels_Supported |
| |
| ${channel_count}= Get Physical Network Interface Count |
| |
| # Note: IPMI network channel logically starts from 1. |
| :FOR ${channel_number} IN RANGE 1 ${channel_count} |
| \ Run External IPMI Standard Command lan print ${channel_number} |
| |
| |
| Test Invalid IPMI Channel Response |
| [Documentation] Verify invalid IPMI channels supported response. |
| [Tags] Test_Invalid_IPMI_Channel_Response |
| |
| ${channel_count}= Get Physical Network Interface Count |
| |
| # To target invalid channel, increment count. |
| ${channel_number}= Evaluate ${channel_count} + 1 |
| |
| # Example of invalid channel: |
| # $ ipmitool -I lanplus -H xx.xx.xx.xx -P password lan print 3 |
| # Get Channel Info command failed: Parameter out of range |
| # Invalid channel: 3 |
| |
| ${stdout}= Run External IPMI Standard Command |
| ... lan print ${channel_number} fail_on_err=${0} |
| Should Contain ${stdout} Invalid channel |
| ... msg=IPMI channel ${channel_number} is invalid but seen working. |
| |
| |
| *** Keywords *** |
| |
| Get Sensor Count |
| [Documentation] Get sensors count using "sdr elist all" command. |
| |
| # Example of "sdr elist all" command output: |
| # BootProgress | 03h | ok | 34.2 | |
| # OperatingSystemS | 05h | ok | 35.1 | |
| # AttemptsLeft | 07h | ok | 34.1 | |
| # occ0 | 08h | ok | 210.1 | Device Disabled |
| # occ1 | 09h | ok | 210.2 | Device Disabled |
| # p0_core0_temp | 11h | ns | 3.1 | Disabled |
| # cpu0_core0 | 12h | ok | 208.1 | Presence detected |
| # p0_core1_temp | 14h | ns | 3.2 | Disabled |
| # cpu0_core1 | 15h | ok | 208.2 | Presence detected |
| # p0_core2_temp | 17h | ns | 3.3 | Disabled |
| # .. |
| # .. |
| # .. |
| # .. |
| # .. |
| # .. |
| # fan3 | 00h | ns | 29.4 | Logical FRU @35h |
| # bmc | 00h | ns | 6.1 | Logical FRU @3Ch |
| # ethernet | 00h | ns | 1.1 | Logical FRU @46h |
| |
| ${output}= Run IPMI Standard Command sdr elist all |
| ${sensor_list}= Split String ${output} \n |
| ${sensor_count}= Get Length ${sensor_list} |
| [Return] ${sensor_count} |
| |
| Set Management Controller ID String |
| [Documentation] Set the management controller ID string. |
| [Arguments] ${string} |
| |
| # Description of argument(s): |
| # string Management Controller ID String to be set |
| |
| ${set_mc_id_string}= Run IPMI Standard Command |
| ... dcmi set_mc_id_string ${string} |
| |
| |
| Get Management Controller ID String And Verify |
| [Documentation] Get the management controller ID string. |
| [Arguments] ${string} |
| |
| # Description of argument(s): |
| # string Management Controller ID string |
| |
| ${get_mc_id}= Run IPMI Standard Command dcmi get_mc_id_string |
| Should Contain ${get_mc_id} ${string} |
| ... msg=Command failed: get_mc_id. |
| |
| |
| Set Watchdog Enabled Using REST |
| [Documentation] Set watchdog Enabled field using REST. |
| [Arguments] ${value} |
| |
| # Description of argument(s): |
| # value Integer value (eg. "0-Disabled", "1-Enabled"). |
| |
| ${value_dict}= Create Dictionary data=${value} |
| ${resp}= OpenBMC Put Request ${HOST_WATCHDOG_URI}/attr/Enabled |
| ... data=${value_dict} |
| |
| |
| Fetch Details From LAN Print |
| [Documentation] Fetch details from LAN print. |
| [Arguments] ${field_name} |
| |
| # Description of argument(s): |
| # ${field_name} Field name to be fetched from LAN print |
| # (e.g. "MAC Address", "Source"). |
| |
| ${stdout}= Run External IPMI Standard Command lan print |
| ${fetch_value}= Get Lines Containing String ${stdout} ${field_name} |
| ${value_fetch}= Fetch From Right ${fetch_value} :${SPACE} |
| [Return] ${value_fetch} |
| |
| |
| Verify Power Reading |
| [Documentation] Get dcmi power reading via IPMI. |
| |
| # Example of power reading command output via IPMI. |
| # Instantaneous power reading: 235 Watts |
| # Minimum during sampling period: 235 Watts |
| # Maximum during sampling period: 235 Watts |
| # Average power reading over sample period: 235 Watts |
| # IPMI timestamp: Thu Jan 1 00:00:00 1970 |
| # Sampling period: 00000000 Seconds. |
| # Power reading state is: deactivated |
| |
| ${power_reading}= Get IPMI Power Reading |
| |
| ${host_state}= Get Host State |
| Run Keyword If '${host_state}' == 'Off' |
| ... Should Be Equal ${power_reading['instantaneous_power_reading']} 0 |
| ... msg=Power reading not zero when power is off. |
| |
| Run Keyword If '${power_reading['instantaneous_power_reading']}' != '0' |
| ... Verify Power Reading Using REST ${power_reading['instantaneous_power_reading']} |
| |
| |
| Verify Power Reading Via Raw Command |
| [Documentation] Get dcmi power reading via IPMI raw command. |
| |
| ${ipmi_raw_output}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['power_reading']['Get'][0]} |
| |
| @{raw_output_list}= Split String ${ipmi_raw_output} ${SPACE} |
| |
| # On successful execution of raw IPMI power reading command, completion |
| # code does not come in output. So current power value will start from 2 |
| # byte instead of 3. |
| |
| ${power_reading_ipmi_raw_3_item}= Get From List ${raw_output_list} 2 |
| ${power_reading_ipmi_raw_3_item}= |
| ... Convert To Integer 0x${power_reading_ipmi_raw_3_item} |
| |
| ${power_reading_rest}= Read Attribute |
| ... ${SENSORS_URI}power/total_power Value |
| |
| # Example of power reading via REST |
| # "CriticalAlarmHigh": 0, |
| # "CriticalAlarmLow": 0, |
| # "CriticalHigh": 3100000000, |
| # "CriticalLow": 0, |
| # "Scale": -6, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts", |
| # "Value": 228000000, |
| # "WarningAlarmHigh": 0, |
| # "WarningAlarmLow": 0, |
| # "WarningHigh": 3050000000, |
| # "WarningLow": 0 |
| |
| # Get power value based on scale i.e. Value * (10 power Scale Value) |
| # e.g. from above case 228000000 * (10 power -6) = 228000000/1000000 |
| |
| ${power_reading_rest}= Evaluate ${power_reading_rest}/1000000 |
| ${ipmi_rest_power_diff}= |
| ... Evaluate abs(${power_reading_rest} - ${power_reading_ipmi_raw_3_item}) |
| |
| Should Be True ${ipmi_rest_power_diff} <= ${allowed_power_diff} |
| ... msg=Power Reading above allowed threshold ${allowed_power_diff}. |
| |
| |
| Verify Management Controller ID String Status |
| [Documentation] Verify management controller ID string status via IPMI. |
| [Arguments] ${status} |
| |
| # Example of dcmi get_conf_param command output: |
| # DHCP Discovery method : |
| # Management Controller ID String is disabled |
| # Vendor class identifier DCMI IANA and Vendor class-specific Informationa are disabled |
| # Initial timeout interval : 4 seconds |
| # Server contact timeout interval : 120 seconds |
| # Server contact retry interval : 64 seconds |
| |
| ${resp}= Run IPMI Standard Command dcmi get_conf_param |
| ${resp}= Get Lines Containing String ${resp} |
| ... Management Controller ID String case_insensitive=True |
| Should Contain ${resp} ${status} |
| ... msg=Management controller ID string is not ${status} |
| |
| |
| Verify Power Reading Using REST |
| [Documentation] Verify power reading using REST. |
| [Arguments] ${power_reading} |
| |
| # Description of argument(s): |
| # power_reading IPMI Power reading |
| |
| ${power_reading_rest}= Read Attribute |
| ... ${SENSORS_URI}power/total_power Value |
| |
| # Example of power reading via REST |
| # "CriticalAlarmHigh": 0, |
| # "CriticalAlarmLow": 0, |
| # "CriticalHigh": 3100000000, |
| # "CriticalLow": 0, |
| # "Scale": -6, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts", |
| # "Value": 228000000, |
| # "WarningAlarmHigh": 0, |
| # "WarningAlarmLow": 0, |
| # "WarningHigh": 3050000000, |
| # "WarningLow": 0 |
| |
| # Get power value based on scale i.e. Value * (10 power Scale Value) |
| # e.g. from above case 228000000 * (10 power -6) = 228000000/1000000 |
| ${power_reading_rest}= Evaluate ${power_reading_rest}/1000000 |
| ${ipmi_rest_power_diff}= |
| ... Evaluate abs(${power_reading_rest} - ${power_reading}) |
| |
| Should Be True ${ipmi_rest_power_diff} <= ${allowed_power_diff} |
| ... msg=Power reading above allowed threshold ${allowed_power_diff}. |
| |
| |
| Get Physical Network Interface Count |
| [Documentation] Return valid physical network interfaces count. |
| |
| # Example: |
| # link/ether 22:3a:7f:70:92:cb brd ff:ff:ff:ff:ff:ff |
| # link/ether 0e:8e:0d:6b:e9:e4 brd ff:ff:ff:ff:ff:ff |
| |
| ${mac_entry_list}= Get BMC MAC Address List |
| ${mac_unique_list}= Remove Duplicates ${mac_entry_list} |
| ${physical_interface_count}= Get Length ${mac_unique_list} |
| |
| [Return] ${physical_interface_count} |
| |
| |
| Execute IPMI Command With Cipher |
| [Documentation] Execute IPMI command with a given cipher level value. |
| [Arguments] ${cipher_level} |
| |
| # Description of argument(s): |
| # cipher_level IPMI chipher level value |
| # (e.g. "1", "2", "3", "15", "16", "17"). |
| |
| ${ipmi_cmd}= Catenate SEPARATOR= |
| ... ipmitool -I lanplus -C ${cipher_level} -P${SPACE}${IPMI_PASSWORD} |
| ... ${SPACE}${HOST}${SPACE}${OPENBMC_HOST}${SPACE}mc info |
| |
| ${rc} ${output}= Run And Return RC and Output ${ipmi_cmd} |
| [Return] ${rc} |