| *** Settings *** |
| Documentation Suite to test hardware sensors. |
| |
| Resource ../lib/utils.robot |
| Resource ../lib/boot_utils.robot |
| Resource ../lib/state_manager.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Resource ../lib/ipmi_client.robot |
| Variables ../data/ipmi_raw_cmd_table.py |
| |
| Suite Setup Suite Setup Execution |
| Test Teardown Test Teardown Execution |
| |
| *** Test Cases *** |
| |
| |
| Verify System Ambient Temperature |
| [Documentation] Check the ambient sensor temperature. |
| [Tags] Verify_System_Ambient_Temperature |
| |
| # Example: |
| # /xyz/openbmc_project/sensors/temperature/ambient |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 25767 |
| # } |
| |
| ${temp_data}= Read Properties ${SENSORS_URI}temperature/ambient |
| Should Be True ${temp_data["Scale"]} == ${-3} |
| Should Be Equal As Strings |
| ... ${temp_data["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| Should Be True ${temp_data["Value"]/1000} <= ${50} |
| ... msg=System working temperature crossed 50 degree celsius. |
| |
| |
| Verify Fan Sensors Attributes |
| [Documentation] Check fan attributes. |
| [Tags] Verify_Fan_Sensor_Attributes |
| |
| # Example: |
| # "/xyz/openbmc_project/sensors/fan_tach/fan0_0", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan0_1", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan1_0", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan1_1", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan2_0", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan2_1", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan3_0", |
| # "/xyz/openbmc_project/sensors/fan_tach/fan3_1" |
| |
| ${fans}= Get Endpoint Paths /xyz/openbmc_project/sensors/ fan* |
| |
| # Access the properties of the fan and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/fan_tach/fan0_0 |
| # { |
| # "Functional": true, |
| # "MaxValue": 0.0, |
| # "MinValue": 0.0, |
| # "Target": 10500, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.RPMS", |
| # "Value": 0.0 |
| # } |
| |
| FOR ${entry} IN @{fans} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Run Keyword And Ignore Error Should Be True ${json["data"]["Target"]} >= 0 |
| Run Keyword And Ignore Error Should Be Equal As Strings |
| ... ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.RPMS |
| Should Be True ${json["data"]["Value"]} >= 0 |
| END |
| |
| Verify PCIE Sensors Attributes |
| [Documentation] Probe PCIE attributes. |
| [Tags] Verify_PCIE_Sensor_Attributes |
| # Example: |
| # /xyz/openbmc_project/sensors/temperature/pcie |
| ${temp_pcie}= Get Endpoint Paths /xyz/openbmc_project/sensors/ pcie |
| |
| # Access the properties of the PCIE and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/temperature/pcie |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 29625 |
| # } |
| |
| |
| FOR ${entry} IN @{temp_pcie} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| ${temp_in_DegreeC}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${temp_in_DegreeC} > 0 |
| END |
| |
| |
| Verify Rail Voltage Sensors Attributes |
| [Documentation] Check rail voltage attributes. |
| [Tags] Verify_Rail_Voltage_Sensor_Attributes |
| # Example of one of the entries returned by 'Get Endpoint Paths': |
| # /xyz/openbmc_project/sensors/voltage/rail_1_voltage |
| # /xyz/openbmc_project/sensors/voltage/rail_2_voltage |
| ${temp_rail}= Get Endpoint Paths /xyz/openbmc_project/sensors/ rail* |
| |
| # Example: |
| # Access the properties of the rail voltage and it should contain |
| # the following entries: |
| # "/xyz/openbmc_project/sensors/voltage/rail_1_voltage": |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Volts", |
| # "Value": 5097 |
| # }, |
| |
| FOR ${entry} IN @{temp_rail} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.Volts |
| ${volts}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${volts} > 0 |
| END |
| |
| |
| Verify VDN Temperature Sensors Attributes |
| [Documentation] Check vdn temperature attributes. |
| [Tags] Verify_VDN_Temperature_Sensors_Attributes |
| # Example of one of the entries returned by 'Get Endpoint Paths': |
| # /xyz/openbmc_project/sensors/temperature/p0_vdn_temp |
| ${temp_vdn}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vdn_temp |
| |
| # Example: |
| # Access the properties of the rail voltage and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/temperature/p0_vdn_temp |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 3000 |
| # } |
| |
| FOR ${entry} IN @{temp_vdn} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| ${vdn_temp}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${vdn_temp} > 0 |
| END |
| |
| Verify VCS Temperature Sensors Attributes |
| [Documentation] Check vcs temperature attributes. |
| [Tags] Verify_VCS_Temperature_Sensors_Attributes |
| # Example of one of the entries returned by 'Get Endpoint Paths': |
| # /xyz/openbmc_project/sensors/temperature/p0_vcs_temp |
| ${temp_vcs}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vcs_temp |
| |
| # Example: |
| # Access the properties of the rail voltage and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/temperature/p0_vcs_temp |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 31000 |
| # }, |
| |
| |
| FOR ${entry} IN @{temp_vcs} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| ${vcs_temp}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${vcs_temp} > 0 |
| END |
| |
| |
| Verify VDD Temperature Sensors Attributes |
| [Documentation] Check vdd temperature attributes. |
| [Tags] Verify_VDD_Temperature_Sensors_Attributes |
| # Example of one of the entries returned by 'Get Endpoint Paths': |
| # /xyz/openbmc_project/sensors/temperature/p0_vdd_temp |
| ${temp_vdd}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vdd_temp |
| |
| # Example: |
| # Access the properties of the rail voltage and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/temperature/p0_vdd_temp |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 4000 |
| # } |
| |
| FOR ${entry} IN @{temp_vdd} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| ${vdd_temp}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${vdd_temp} > 0 |
| END |
| |
| |
| Verify VDDR Temperature Sensors Attributes |
| [Documentation] Check vddr temperature attributes. |
| [Tags] Verify_VDDR_Temperature_Sensors_Attributes |
| # Example of one of the entries returned by 'Get Endpoint Paths': |
| # /xyz/openbmc_project/sensors/temperature/p0_vddr_temp |
| ${temp_vddr}= |
| ... Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vddr_temp |
| |
| # Example: |
| # Access the properties of the rail voltage and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/temperature/p0_vddr_temp |
| # { |
| # "Scale": -3, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC", |
| # "Value": 4000 |
| # } |
| |
| FOR ${entry} IN @{temp_vddr} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Should Be True ${json["data"]["Scale"]} == -3 |
| Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC |
| ${vddr_temp}= Evaluate ${json["data"]["Value"]} / 1000 |
| Should Be True ${vddr_temp} > 0 |
| END |
| |
| Verify Power Sensors Attributes |
| [Documentation] Check power sensor attributes. |
| [Tags] Verify_Power_Sensor_Attributes |
| # Example: |
| # /xyz/openbmc_project/sensors/power/power_1 |
| # /xyz/openbmc_project/sensors/power/power_2 |
| # /xyz/openbmc_project/sensors/power/power0 |
| # /xyz/openbmc_project/sensors/power/POWER1 |
| # /xyz/openbmc_project/sensors/power/POWER_1 |
| |
| ${power}= Get Endpoint Paths /xyz/openbmc_project/sensors/ power* |
| |
| # Access the properties of the power sensors and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/power/power_1 |
| # { |
| # "MaxValue": 255.0, |
| # "MinValue": 0.0, |
| # "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts", |
| # "Value": 0.0 |
| # } |
| |
| FOR ${entry} IN @{power} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Run Keyword And Ignore Error Should Be True ${json["data"]["Target"]} >= 0 |
| Should Be True ${json["data"]["Value"]} >= 0 |
| END |
| |
| |
| Verify Voltage Sensors Attributes |
| [Documentation] Check voltage sensors attributes. |
| [Tags] Verify_Voltage_Sensor_Attributes |
| |
| # Example: |
| # "/xyz/openbmc_project/sensors/voltage/voltage0", |
| # "/xyz/openbmc_project/sensors/voltage/voltage_1", |
| # "/xyz/openbmc_project/sensors/voltage/VOLTAGE_2", |
| # "/xyz/openbmc_project/sensors/voltage/VOLTAGE1", |
| # "/xyz/openbmc_project/sensors/voltage/voltage". |
| |
| ${voltage}= Get Endpoint Paths /xyz/openbmc_project/sensors/voltage/ * |
| |
| # Access the properties of the voltage sensors and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/voltage/voltage0 |
| # { |
| # "MaxValue": 255.0, |
| # "MinValue": 0.0, |
| # "Unit": xyz.openbmc_project.Sensor.Value.Unit.Volts |
| # "Value": 0.0 |
| # } |
| |
| FOR ${entry} IN @{voltage} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Run Keyword And Ignore Error Should Be Equal As Strings |
| ... ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.Volts |
| Run Keyword And Ignore Error Should Be True ${json["data"]["Value"]} >= 0 |
| END |
| |
| |
| Verify Current Sensors Attributes |
| [Documentation] Check current sensors attributes. |
| [Tags] Verify_Current_Sensor_Attributes |
| |
| # Example: |
| # "/xyz/openbmc_project/sensors/current/current0", |
| # "/xyz/openbmc_project/sensors/current/current_1", |
| # "/xyz/openbmc_project/sensors/current/CURRENT_2", |
| # "/xyz/openbmc_project/sensors/current/CURRENT1", |
| # "/xyz/openbmc_project/sensors/current/current". |
| |
| ${current}= Get Endpoint Paths /xyz/openbmc_project/sensors/ curr* |
| |
| # Access the properties of the current sensors and it should contain |
| # the following entries: |
| # /xyz/openbmc_project/sensors/current/current0 |
| # { |
| # "MaxValue": 255.0, |
| # "MinValue": 0.0, |
| # "Unit": xyz.openbmc_project.Sensor.Value.Unit.Amperes |
| # "Value": 0.0 |
| # } |
| |
| FOR ${entry} IN @{current} |
| ${resp}= OpenBMC Get Request ${entry} |
| ${json}= To JSON ${resp.content} |
| Run Keyword And Ignore Error Should Be Equal As Strings |
| ... ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.Amperes |
| Should Be True ${json["data"]["Value"]} >= 0 |
| END |
| |
| |
| Verify Power Redundancy Using REST |
| [Documentation] Verify power redundancy is enabled. |
| [Tags] Verify_Power_Redundancy_Using_REST |
| |
| # Example: |
| # /xyz/openbmc_project/sensors/chassis/PowerSupplyRedundancy |
| # { |
| # "error": 0, |
| # "units": "", |
| # "value": "Enabled" |
| # } |
| |
| # Power Redundancy is a read-only attribute. It cannot be set. |
| |
| # Pass if sensor is in /xyz and it's enabled. |
| ${redundancy_setting}= Read Attribute |
| ... ${OPENBMC_BASE_URI}control/power_supply_redundancy |
| ... PowerSupplyRedundancyEnabled |
| Should Be Equal As Integers ${redundancy_setting} ${1} |
| ... msg=PowerSupplyRedundancyEnabled not set as expected. |
| |
| |
| Verify Power Redundancy Using IPMI |
| [Documentation] Verify IPMI reports Power Redundancy is enabled. |
| [Tags] Verify_Power_Redundancy_Using_IPMI |
| |
| # Refer to data/ipmi_raw_cmd_table.py for command definition. |
| # Power Redundancy is a read-only attribute. It cannot be set. |
| |
| ${output}= Run IPMI Standard Command |
| ... raw ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][0]} |
| |
| ${scanning}= Set Variable |
| ... ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][5]} |
| ${no_scanning}= Set Variable |
| ... ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][3]} |
| |
| ${enabled_scanning}= Evaluate $scanning in $output |
| ${enabled_no_scanning}= Evaluate $no_scanning in $output |
| |
| # Either enabled_scanning or enabled_noscanning should be True. |
| Should Be True ${enabled_scanning} or ${enabled_no_scanning} |
| ... msg=Failed IPMI power redundancy check, result=${output}. |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do the initial test suite setup. |
| # - Power off. |
| # - Boot Host. |
| REST Power Off stack_mode=skip |
| REST Power On |
| |
| Test Teardown Execution |
| [Documentation] Do the post test teardown. |
| # - Capture FFDC on test failure. |
| # - Delete error logs. |
| # - Close all open SSH connections. |
| |
| FFDC On Test Case Fail |
| Delete All Error Logs |
| Close All Connections |