blob: 5ea1a0eba39f28981fb38f57b670ae669f0907d0 [file] [log] [blame]
*** Settings ***
Documentation VMI static/dynamic IP config tests.
Resource ../../lib/resource.robot
Resource ../../lib/bmc_redfish_resource.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/bmc_redfish_utils.robot
Library ../../lib/bmc_network_utils.py
Suite Setup Suite Setup Execution
Test Teardown FFDC On Test Case Fail
Suite Teardown Redfish.Logout
*** Variables ***
# users User Name password
@{ADMIN} admin_user TestPwd123
@{OPERATOR} operator_user TestPwd123
@{ReadOnly} readonly_user TestPwd123
@{NoAccess} noaccess_user TestPwd123
&{USERS} Administrator=${ADMIN} Operator=${OPERATOR} ReadOnly=${ReadOnly}
... NoAccess=${NoAccess}
${test_ipv4} 10.6.6.6
${test_gateway} 10.6.6.1
${test_netmask} 255.255.252.0
&{DHCP_ENABLED} DHCPEnabled=${${True}}
&{DHCP_DISABLED} DHCPEnabled=${${False}}
&{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED}
&{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED}
${wait_time} 10s
*** Test Cases ***
Verify All VMI EthernetInterfaces
[Documentation] Verify all VMI ethernet interfaces.
[Tags] Verify_All_VMI_EthernetINterfaces
Verify VMI EthernetInterfaces
Verify Existing VMI Network Interface Details
[Documentation] Verify existing VMI network interface details.
[Tags] Verify_VMI_Network_Interface_Details
${vmi_ip}= Get VMI Network Interface Details
${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP
Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]}
Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]}
Should Be Equal As Strings ${vmi_ip["Id"]} intf0
Should Be Equal As Strings ${vmi_ip["Description"]}
... Ethernet Interface for Virtual Management Interface
Should Be Equal As Strings ${vmi_ip["Name"]} Virtual Management Interface
Should Be True ${vmi_ip["InterfaceEnabled"]}
Delete Existing Static VMI IP Address
[Documentation] Delete existing static VMI IP address.
[Tags] Delete_Existing_Static_VMI_IP_Address
${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED}
Delete VMI IPv4 Address IPv4StaticAddresses valid_status_code=${HTTP_ACCEPTED}
${default}= Set Variable 0.0.0.0
Verify VMI Network Interface Details ${default} Static ${default} ${default}
Verify User Cannot Delete ReadOnly Property IPv4Addresses
[Documentation] Verify user cannot delete readonly property IPv4Addresses.
[Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses
${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED}
Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_BAD_REQUEST}
Assign Valid And Invalid Static IPv4 Address To VMI
[Documentation] Assign static IPv4 address to VMI.
[Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI
[Template] Set Static IPv4 Address To VMI And Verify
[Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution
# ip gateway netmask valid_status_code
10.5.20.30 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED}
a.3.118.94 0.0.0.0 255.255.252.0 ${HTTP_BAD_REQUEST}
Add Multiple IP Addreses On VMI Interface And Verify
[Documentation] Add multiple IP addreses on VMI interface and verify.
[Tags] Add_Multiple_IP_Addreses_On_VMI_Interface_And_Verify
[Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution
${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=0.0.0.0
${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=0.0.0.0
${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=0.0.0.0
${ips}= Create List ${ip1} ${ip2} ${ip3}
Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_ACCEPTED}]
Verify VMI Network Interface Details ${ip1["Address"]} Static ${ip1["Gateway"]} ${ip1["SubnetMask"]}
Modify IP Addresses On VMI Interface And Verify
[Documentation] Modify IP addresses on VMI interface and verify.
[Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify
[Template] Set Static IPv4 Address To VMI And Verify
[Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution
# ip gateway netmask valid_status_code
10.5.5.10 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED}
10.5.5.11 0.0.0.0 255.255.252.0 ${HTTP_ACCEPTED}
Switch Between IP Origins On VMI And Verify Details
[Documentation] Switch between IP origins on VMI and verify details.
[Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details
Switch VMI IPv4 Origin And Verify Details
Switch VMI IPv4 Origin And Verify Details
Verify Persistency Of VMI IPv4 Details After Host Reboot
[Documentation] Verify persistency of VMI IPv4 details after host reboot.
[Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot
# Verifying persistency of dynamic address.
Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED}
${default}= Set Variable 0.0.0.0
Verify VMI Network Interface Details ${default} DHCP ${default} ${default}
# Verifying persistency of static address.
Switch VMI IPv4 Origin And Verify Details
Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask}
Delete VMI Static IP Address And Verify
[Documentation] Delete VMI static IP address and verify.
[Tags] Delete_VMI_Static_IP_Address_And_Verify
[Teardown] Test Teardown Execution
Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask}
Delete VMI IPv4 Address
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Empty ${resp.dict["IPv4Addresses"]}
Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete
[Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted.
[Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete
[Teardown] Run keywords Delete VMI IPv4 Address IPv4Addresses AND Test Teardown Execution
Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask}
${session_info}= Get Redfish Session Info
Redfish.Delete ${session_info["location"]}
# Create a new Redfish session
Redfish Power Off
Redfish Power On
Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask}
Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots
[Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots
[Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots
[Teardown] Test Teardown Execution
Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED}
${vmi_ip_config}= Get VMI Network Interface Details
# Verifying persistency of dynamic address after multiple reboots.
FOR ${i} IN RANGE ${2}
Redfish Power Off
Redfish Power On
Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} DHCP ${vmi_ip_config["IPv4_Gateway"]}
... ${vmi_ip_config["IPv4_SubnetMask"]}
END
Enable DHCP When Static IP Configured And Verify Static IP
[Documentation] Enable DHCP when static ip configured and verify static ip
[Tags] Enable_DHCP_when_Static_IP_Configured_And_Verify_Static_IP
[Teardown] Test Teardown Execution
Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask}
Set VMI IPv4 Origin ${True}
${vmi_network_conf}= Get VMI Network Interface Details
Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]}
Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot
[Documentation] Verify VMI static IP configuration persist on BMC reset.
[Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot
[Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail
Set Static IPv4 Address To VMI ${test_ipv4} ${test_gateway} ${test_netmask}
OBMC Reboot (off)
Redfish Power On
# Verifying the VMI static configuration
Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask}
Verify To Configure VMI Static IP Address With Different User Roles
[Documentation] Verify to configure vmi static ip address with different user roles.
[Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Config VMI Static IP Address Using Different Users
[Teardown] Delete BMC Users Using Redfish
# username password ip_address gateway nemask valid_status_code
admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED}
operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN}
readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN}
noaccess_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN}
Verify To Delete VMI Static IP Address With Different User Roles
[Documentation] Verify to delete vmi static IP address with different user roles.
[Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Delete VMI Static IP Address Using Different Users
[Teardown] Delete BMC Users Using Redfish
# username password valid_status_code
admin_user TestPwd123 ${HTTP_ACCEPTED}
operator_user TestPwd123 ${HTTP_FORBIDDEN}
readonly_user TestPwd123 ${HTTP_FORBIDDEN}
noaccess_user TestPwd123 ${HTTP_FORBIDDEN}
Verify To Update VMI Static IP Address With Different User Roles
[Documentation] Verify to update vmi static IP address with different user roles.
[Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles_And_Verify
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Config VMI Static IP Address Using Different Users
[Teardown] Delete BMC Users Using Redfish
# username password ip_address gateway nemask valid_status_code
admin_user TestPwd123 10.5.10.20 0.0.0.0 255.255.0.0 ${HTTP_ACCEPTED}
operator_user TestPwd123 10.5.10.30 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN}
readonly_user TestPwd123 10.5.20.40 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN}
noaccess_user TestPwd123 10.5.30.50 0.0.0.0 255.255.0.0 ${HTTP_FORBIDDEN}
Verify To Read VMI Network Configuration With Different User Roles
[Documentation] Verify to read vmi network configuration with different user roles.
[Tags] Verify_To_Read_VMI_Network_Configuration_Via_Different_User_Roles
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Read VMI Static IP Address Using Different Users
[Teardown] Delete BMC Users Using Redfish
# username password valid_status_code
admin_user TestPwd123 ${HTTP_OK}
operator_user TestPwd123 ${HTTP_OK}
readonly_user TestPwd123 ${HTTP_OK}
noaccess_user TestPwd123 ${HTTP_FORBIDDEN}
Enable DHCP On VMI Network Via Different Users Roles And Verify
[Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify.
[Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Update User Role And Set VMI IPv4 Origin
[Teardown] Delete BMC Users Using Redfish
# username password dhcp_enabled valid_status_code
admin_user TestPwd123 ${True} ${HTTP_ACCEPTED}
operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN}
readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN}
noaccess_user TestPwd123 ${True} ${HTTP_FORBIDDEN}
Disable DHCP On VMI Network Via Different Users Roles And Verify
[Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify.
[Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify
[Setup] Create Users With Different Roles users=${USERS} force=${True}
[Template] Update User Role And Set VMI IPv4 Origin
[Teardown] Delete BMC Users Using Redfish
# username password dhcp_enabled valid_status_code
admin_user TestPwd123 ${False} ${HTTP_ACCEPTED}
operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN}
readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN}
noaccess_user TestPwd123 ${False} ${HTTP_FORBIDDEN}
Enable And Disable DHCP And Verify
[Documentation] verify enable DHCP and disable DHCP.
[Tags] Enabled_And_Disabled_DHCP_Verify
Set VMI IPv4 Origin ${True}
${default}= Set Variable 0.0.0.0
Verify VMI Network Interface Details ${default} DHCP ${default} ${default}
Set VMI IPv4 Origin ${False}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Empty ${resp.dict["IPv4Addresses"]}
Multiple Times Enable And Disable DHCP And Verify
[Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP
... each time when DHCP is enabled
[Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify
${default}= Set Variable 0.0.0.0
FOR ${i} IN RANGE ${2}
Set VMI IPv4 Origin ${True}
Verify VMI Network Interface Details ${default} DHCP ${default} ${default}
Set VMI IPv4 Origin ${False}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Empty ${resp.dict["IPv4Addresses"]}
END
*** Keywords ***
Suite Setup Execution
[Documentation] Do test setup execution task.
Redfish.Login
Redfish Power On
${active_channel_config}= Get Active Channel Config
Set Suite Variable ${active_channel_config}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
${ip_resp}= Evaluate json.loads('''${resp.text}''') json
${length}= Get Length ${ip_resp["IPv4StaticAddresses"]}
${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details
Set Suite Variable ${vmi_network_conf}
Test Teardown Execution
[Documentation] Do test teardown execution task.
FFDC On Test Case Fail
${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False}
Run Keyword If ${vmi_network_conf} != ${None}
... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]}
... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]}
Get VMI Network Interface Details
[Documentation] Get VMI network interface details.
[Arguments] ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# valid_status_code Expected valid status code from GET request.
# Note: It returns a dictionary of VMI eth0 parameters.
${active_channel_config}= Get Active Channel Config
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... valid_status_codes=[${valid_status_code}]
${ip_resp}= Evaluate json.loads('''${resp.text}''') json
${static_exists}= Run Keyword And Ignore Error
... Set Variable ${ip_resp["IPv4StaticAddresses"][0]["Address"]}
${static_exists}= Set Variable If '${static_exists[0]}' == 'PASS' ${True} ${False}
${vmi_ip}= Create Dictionary DHCPv4=${${ip_resp["DHCPv4"]["DHCPEnabled"]}} Id=${ip_resp["Id"]}
... Description=${ip_resp["Description"]} IPv4_Address=${ip_resp["IPv4Addresses"][0]["Address"]}
... IPv4_AddressOrigin=${ip_resp["IPv4Addresses"][0]["AddressOrigin"]} Name=${ip_resp["Name"]}
... IPv4_Gateway=${ip_resp["IPv4Addresses"][0]["Gateway"]}
... InterfaceEnabled=${${ip_resp["InterfaceEnabled"]}}
... IPv4_SubnetMask=${ip_resp["IPv4Addresses"][0]["SubnetMask"]}
... IPv4StaticAddresses=${${static_exists}}
[Return] &{vmi_ip}
Get Immediate Child Parameter From VMI Network Interface
[Documentation] Get immediate child parameter from VMI network interface.
[Arguments] ${parameter} ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc.
# valid_status_code Expected valid status code from GET request.
${active_channel_config}= Get Active Channel Config
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... valid_status_codes=[${valid_status_code}]
${ip_resp}= Evaluate json.loads('''${resp.text}''') json
${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]}
... ${ip_resp["DHCPv4"]["${parameter}"]}
[Return] ${value}
Verify VMI EthernetInterfaces
[Documentation] Verify VMI ethernet interfaces.
[Arguments] ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# valid_status_code Expected valid status code from GET request.
${resp}= Redfish.Get /redfish/v1/Systems/hypervisor/EthernetInterfaces
... valid_status_codes=[${valid_status_code}]
${resp}= Evaluate json.loads('''${resp.text}''') json
${interfaces}= Set Variable ${resp["Members"]}
Should Be Equal As Strings ${interfaces[0]}[@odata.id]
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0
Should Be Equal As Strings ${interfaces[1]}[@odata.id]
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth1
Should Be Equal ${resp["Members@odata.count"]} ${2}
Verify VMI Network Interface Details
[Documentation] Verify VMI network interface details.
[Arguments] ${ip} ${origin} ${gateway} ${netmask}
... ${valid_status_code}=${HTTP_OK}
# Description of argument(s):
# ip VMI IPv4 address.
# origin Origin of IPv4 address eg. Static or DHCP.
# gateway Gateway for VMI IP.
# netmask Subnetmask for VMI IP.
# valid_status_code Expected valid status code from GET request. Default is HTTP_OK.
${vmi_ip}= Get VMI Network Interface Details ${valid_status_code}
Should Be Equal As Strings ${origin} ${vmi_ip["IPv4_AddressOrigin"]}
Should Be Equal As Strings ${gateway} ${vmi_ip["IPv4_Gateway"]}
Should Be Equal As Strings ${netmask} ${vmi_ip["IPv4_SubnetMask"]}
Should Be Equal As Strings ${ip} ${vmi_ip["IPv4_Address"]}
Set Static IPv4 Address To VMI And Verify
[Documentation] Set static IPv4 address to VMI.
[Arguments] ${ip} ${gateway} ${netmask} ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# ip VMI IPv4 address.
# gateway Gateway for VMI IP.
# netmask Subnetmask for VMI IP.
# valid_status_code Expected valid status code from GET request. Default is HTTP_ACCEPTED.
${data}= Set Variable
... {"IPv4StaticAddresses": [{"Address": "${ip}","SubnetMask": "${netmask}","Gateway": "${gateway}"}]}
${active_channel_config}= Get Active Channel Config
${resp}= Redfish.Patch
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... body=${data} valid_status_codes=[${valid_status_code}]
# Wait few seconds for new configuration to get populated on runtime.
Sleep ${wait_time}
Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED}
Verify VMI Network Interface Details ${ip} Static ${gateway} ${netmask}
Delete VMI IPv4 Address
[Documentation] Delete VMI IPv4 address.
[Arguments] ${delete_param}=IPv4StaticAddresses ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# delete_param Parameter to be deleted eg. IPv4StaticAddresses or IPv4Addresses.
# Default is IPv4StaticAddresses.
# valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK.
${data}= Set Variable {"${delete_param}": [${Null}]}
${active_channel_config}= Get Active Channel Config
${resp}= Redfish.Patch
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... body=${data} valid_status_codes=[${valid_status_code}]
Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Empty ${resp.dict["IPv4StaticAddresses"]}
Set VMI IPv4 Origin
[Documentation] Set VMI IPv4 origin.
[Arguments] ${dhcp_enabled}=${False} ${valid_status_code}=${HTTP_ACCEPTED}
# Description of argument(s):
# dhcp_enabled True if user wants to enable DHCP. Default is Static, hence value is set to False.
# valid_status_code Expected valid status code from PATCH request. Default is HTTP_OK.
${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP}
${resp}= Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/eth0 body=${data}
... valid_status_codes=[${valid_status_code}]
Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled}
Return From Keyword If ${valid_status_code} != ${HTTP_ACCEPTED}
${resp}= Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
Should Be Equal ${resp.dict["DHCPv4"]["DHCPEnabled"]} ${dhcp_enabled}
Switch VMI IPv4 Origin And Verify Details
[Documentation] Switch VMI IPv4 origin and verify details.
${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled
${dhcp_enabled}= Set Variable If ${curr_mode} == ${False} ${True} ${False}
${default}= Set Variable 0.0.0.0
${origin}= Set Variable If ${curr_mode} == ${False} DHCP Static
Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED}
Verify VMI Network Interface Details ${default} ${origin} ${default} ${default}
Delete VMI Static IP Address Using Different Users
[Documentation] Update user role and delete vmi static IP address.
[Arguments] ${username} ${password} ${valid_status_code}
[Teardown] Run Keywords Redfish.Login AND
... Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway}
... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout
# Description of argument(s):
# username The host username.
# password The host password.
# valid_status_code The expected valid status code.
Redfish.Login ${username} ${password}
Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code}
Redfish.Logout
Config VMI Static IP Address Using Different Users
[Documentation] Update user role and update vmi static ip address.
[Arguments] ${username} ${password} ${ip} ${gateway} ${netmask}
... ${valid_status_code}
# Description of argument(s):
# username The host username.
# password The host password.
# ip IP address to be added (e.g. "10.7.7.7").
# subnet_mask Subnet mask for the IP to be added
# (e.g. "255.255.0.0").
# gateway Gateway for the IP to be added (e.g. "10.7.7.1").
# valid_status_code The expected valid status code.
Redfish.Login ${username} ${password}
Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code}
Redfish.Logout
Read VMI Static IP Address Using Different Users
[Documentation] Update user role and read vmi static ip address.
[Arguments] ${username} ${password} ${valid_status_code}
# Description of argument(s):
# username The host username.
# password The host password.
# valid_status_code The expected valid status code.
Redfish.Login ${username} ${password}
Redfish.Get
... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
... valid_status_codes=[${valid_status_code}]
Redfish.Logout
Delete BMC Users Using Redfish
[Documentation] Delete BMC users via redfish.
Redfish.Login
Delete BMC Users Via Redfish users=${USERS}
Update User Role And Set VMI IPv4 Origin
[Documentation] Update User Role And Set VMI IPv4 Origin.
[Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code}
# Description of argument(s):
# username The host username.
# password The host password.
# dhcp_enabled Indicates whether dhcp should be enabled
# (${True}, ${False}).
# valid_status_code The expected valid status code.
Redfish.Login ${username} ${password}
Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code}
Redfish.Logout