| *** Settings *** |
| Documentation Test BMC DHCP multiple network interface functionalities. |
| ... Run on setup eth0 in static and eth1 in DHCP. |
| |
| Resource ../../lib/resource.robot |
| Resource ../../lib/common_utils.robot |
| Resource ../../lib/connection_client.robot |
| Resource ../../lib/bmc_network_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| |
| Suite Setup Suite Setup Execution |
| Test Teardown FFDC On Test Case Fail |
| Suite Teardown Redfish.Logout |
| |
| *** Variables *** |
| |
| &{DHCP_ENABLED} DHCPEnabled=${True} |
| &{DHCP_DISABLED} DHCPEnabled=${False} |
| &{ENABLE_DHCP} DHCPv4=${DHCP_ENABLED} |
| &{DISABLE_DHCP} DHCPv4=${DHCP_DISABLED} |
| ${ethernet_interface} eth1 |
| |
| &{dns_enable_dict} UseDNSServers=${True} |
| &{dns_disable_dict} UseDNSServers=${False} |
| &{ntp_enable_dict} UseNTPServers=${True} |
| &{ntp_disable_dict} UseNTPServers=${False} |
| &{domain_name_enable_dict} UseDomainName=${True} |
| &{domain_name_disable_dict} UseDomainName=${False} |
| &{enable_multiple_properties} UseDomainName=${True} |
| ... UseNTPServers=${True} |
| ... UseDNSServers=${True} |
| &{disable_multiple_properties} UseDomainName=${False} |
| ... UseNTPServers=${False} |
| ... UseDNSServers=${False} |
| |
| Test Tags Multiple_Interfaces_DHCP |
| |
| *** Test Cases *** |
| |
| Disable DHCP On Eth1 And Verify System Is Accessible By Eth0 |
| [Documentation] Disable DHCP on eth1 using Redfish and verify |
| ... if system is accessible by eth0. |
| [Tags] Disable_DHCP_On_Eth1_And_Verify_System_Is_Accessible_By_Eth0 |
| [Teardown] Set DHCPEnabled To Enable Or Disable True eth1 |
| |
| Set DHCPEnabled To Enable Or Disable False eth1 |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${2} |
| Should Be Equal ${DHCPEnabled} ${False} |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Enable DHCP On Eth1 And Verify System Is Accessible By Eth0 |
| [Documentation] Enable DHCP on eth1 using Redfish and verify if system |
| ... is accessible by eth0. |
| [Tags] Enable_DHCP_On_Eth1_And_Verify_System_Is_Accessible_By_Eth0 |
| [Setup] Set DHCPEnabled To Enable Or Disable False eth1 |
| |
| Set DHCPEnabled To Enable Or Disable True eth1 |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${2} |
| Should Be Equal ${DHCPEnabled} ${True} |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Set Network Property via Redfish And Verify |
| [Documentation] Set network property via Redfish and verify. |
| [Tags] Set_Network_Property_via_Redfish_And_Verify |
| [Teardown] Restore Configuration |
| [Template] Apply DHCP Config |
| |
| # property |
| ${dns_enable_dict} |
| ${dns_disable_dict} |
| ${domain_name_enable_dict} |
| ${domain_name_disable_dict} |
| ${ntp_enable_dict} |
| ${ntp_disable_dict} |
| ${enable_multiple_properties} |
| ${disable_multiple_properties} |
| |
| Enable DHCP On Eth1 And Check No Impact On Eth0 |
| [Documentation] Enable DHCP On Eth1 And Check No Impact On Eth0. |
| [Tags] Enable_DHCP_On_Eth1_And_Check_No_Impact_On_Eth0 |
| [Setup] Set DHCPEnabled To Enable Or Disable False eth1 |
| |
| # Getting the eth0 details before enabling DHCP. |
| ${ip_data_before}= Get BMC IP Info |
| |
| # Enable DHCP on eth1. |
| Set DHCPEnabled To Enable Or Disable True eth1 |
| |
| # Check the value of DHCPEnabled on eth0 is not impacted. |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${1} |
| Should Be Equal ${DHCPEnabled} ${False} |
| |
| # Getting eth0 details after enabling DHCP. |
| ${ip_data_after}= Get BMC IP Info |
| |
| # Before and after IP details must match. |
| Should Be Equal ${ip_data_before} ${ip_data_after} |
| |
| Enable DHCP On Eth1 And Check Persistency On Reboot |
| [Documentation] Enable DHCP on Eth1 and check persistency |
| ... on reboot and should not switch to static. |
| [Tags] Enable_DHCP_On_Eth1_And_Check_Persistency_On_Reboot |
| [Setup] Set DHCPEnabled To Enable Or Disable False eth1 |
| |
| Set DHCPEnabled To Enable Or Disable True eth1 |
| Redfish OBMC Reboot (off) stack_mode=skip |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${2} |
| Should Be Equal ${DHCPEnabled} ${True} |
| |
| Switch Between DHCP And Static |
| [Documentation] Switch between DHCP and static. |
| [Tags] Switch_Between_DHCP_And_Static |
| [Teardown] Set DHCPEnabled To Enable Or Disable True eth1 |
| |
| # Fetch the IP details before. |
| ${ip_addr_before} ${gateway_before} ${subnetmask_before} Get DHCP IP Info |
| |
| # Switch Between Static and DHCP. |
| FOR ${i} IN RANGE ${10} |
| Set DHCPEnabled To Enable Or Disable False eth1 |
| Set DHCPEnabled To Enable Or Disable True eth1 |
| END |
| Sleep 5s |
| |
| # Fetch the IP details after. |
| ${ip_addr_after} ${gateway_after} ${subnetmask_after} Get DHCP IP Info |
| |
| # DHCP Details must be the same before and after. |
| Should Be Equal ${ip_addr_before} ${ip_addr_after} |
| Should Be Equal ${gateway_before} ${gateway_after} |
| Should Be Equal ${subnetmask_before} ${subnetmask_after} |
| |
| Disable DHCP On Eth1 And Verify DHCP IP Erased |
| [Documentation] Disable DHCP on Eth1 and verify DHCP IP erased. |
| [Tags] Disable_DHCP_On_Eth1_And_Verify_DHCP_IP_Erased |
| [Teardown] Set DHCPEnabled To Enable Or Disable True eth1 |
| |
| Set DHCPEnabled To Enable Or Disable False eth1 |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${2} |
| Should Be Equal ${DHCPEnabled} ${False} |
| |
| ${dhcp_ip_list}= Get Network Configuration Using Channel Number ${2} |
| |
| Should Be Empty ${dhcp_ip_list} |
| ... msg=From switching from DHCP to Static DHCP IP is not erased. |
| |
| *** Keywords *** |
| |
| Set DHCPEnabled To Enable Or Disable |
| [Documentation] Enable or Disable DHCP on the interface. |
| [Arguments] ${dhcp_enabled}=${False} ${interface}=${ethernet_interface} |
| ... ${valid_status_code}=[${HTTP_OK},${HTTP_ACCEPTED}] |
| |
| # Description of argument(s): |
| # dhcp_enabled False for disabling DHCP and True for Enabling DHCP. |
| # interface eth0 or eth1. Default is eth1. |
| # valid_status_code Expected valid status code from Patch request. |
| # Default is HTTP_OK. |
| |
| ${data}= Set Variable If ${dhcp_enabled} == ${False} ${DISABLE_DHCP} ${ENABLE_DHCP} |
| ${resp}= Redfish.Patch |
| ... /redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/${interface} |
| ... body=${data} valid_status_codes=${valid_status_code} |
| |
| Apply DHCP Config |
| [Documentation] Apply DHCP Config |
| [Arguments] ${property} |
| |
| # Description of Argument(s): |
| # property DHCP property values. |
| |
| ${active_channel_config}= Get Active Channel Config |
| Redfish.Patch |
| ... /redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}/ |
| ... body={"DHCPv4":${property}} valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Verify Ethernet Config Property ${property} ${resp.dict["DHCPv4"]} |
| |
| |
| Verify Ethernet Config Property |
| [Documentation] verify ethernet config properties. |
| [Arguments] ${property} ${response_data} |
| |
| # Description of argument(s): |
| # ${property} DHCP Properties in dictionary. |
| # Example: |
| # property value |
| # DHCPEnabled :False |
| # UseDomainName :True |
| # UseNTPServers :True |
| # UseDNSServers :True |
| # ${response_data} DHCP Response data in dictionary. |
| # Example: |
| # property value |
| # DHCPEnabled :False |
| # UseDomainName :True |
| # UseNTPServers :True |
| # UseDNSServers :True |
| |
| ${key_map}= Get Dictionary Items ${property} |
| FOR ${key} ${value} IN @{key_map} |
| Should Be Equal As Strings ${response_data['${key}']} ${value} |
| END |
| |
| Restore Configuration |
| [Documentation] Restore the configuration to Both Static Network |
| |
| Run Keyword If '${CHANNEL_NUMBER}' == '${1}' Add IP Address ${OPENBMC_HOST} ${eth0_subnet_mask} ${eth0_gateway} |
| ... ELSE IF '${CHANNEL_NUMBER}' == '{2}' Add IP Address ${OPENBMC_HOST_1} ${eth1_subnet_mask} ${eth1_gateway} |
| |
| Get Network Configuration Using Channel Number |
| [Documentation] Get ethernet interface. |
| [Arguments] ${channel_number} |
| |
| # Description of argument(s): |
| # channel_number Ethernet channel number, 1 is for eth0 and 2 is for eth1 (e.g. "1"). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| |
| @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses |
| RETURN @{network_configurations} |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup task. |
| |
| Ping Host ${OPENBMC_HOST} |
| Redfish.Login |
| |
| # Get the configuration of eth1 |
| ${network_configurations}= Get Network Configuration Using Channel Number ${2} |
| FOR ${network_configuration} IN @{network_configurations} |
| Run Keyword If '${network_configuration['Address']}' == '${OPENBMC_HOST_1}' |
| ... Run Keywords Set Suite Variable ${eth1_subnet_mask} ${network_configuration['SubnetMask']} |
| ... AND Set Suite Variable ${eth1_gateway} ${network_configuration['Gateway']} |
| ... AND Exit For Loop |
| END |
| |
| # Get the configuration of eth0 |
| ${network_configurations}= Get Network Configuration Using Channel Number ${1} |
| FOR ${network_configuration} IN @{network_configurations} |
| Run Keyword If '${network_configuration['Address']}' == '${OPENBMC_HOST}' |
| ... Run Keywords Set Suite Variable ${eth0_subnet_mask} ${network_configuration['SubnetMask']} |
| ... AND Set Suite Variable ${eth0_gateway} ${network_configuration['Gateway']} |
| ... AND Exit For Loop |
| END |