| #!/usr/bin/env python3 |
| |
| r""" |
| IPMI raw commands table: |
| |
| - Define IPMI interface index, commands and expected output. |
| |
| """ |
| |
| # The currently supported cipher list. |
| # Refer: |
| # openbmc/meta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/recipe |
| # s-phosphor/ipmi/phosphor-ipmi-host/cipher_list.json |
| valid_ciphers = ['17'] |
| unsupported_ciphers = ['1', '2', '15', '16'] |
| |
| IPMI_RAW_CMD = { |
| # Interface name |
| 'power_supply_redundancy': |
| { |
| # Command action type |
| 'Get': |
| [ |
| # raw command, expected output(s), comment |
| "0x04 0x2d 0x0b", |
| "00 00 01 00", |
| "Byte position 3rd LSB e.g. 01 indicates disabled", |
| "00 00 02 00", |
| "Byte position 3rd LSB e.g. 02 indicates enabled", |
| "00 40 02 00", |
| "40 is scanning enabled and 02 indicates redundancy enabled", |
| ], |
| 'Enabled': |
| [ |
| # raw command, expected output, comment |
| "0x04 0x30 0x0b 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00", |
| "none", |
| "Enabled nibble position 6th LSB e.g. 0x2", |
| ], |
| 'Disabled': |
| [ |
| # raw command, expected output, comment |
| "0x04 0x30 0x0b 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00", |
| "none", |
| "Enabled nibble position 6th LSB e.g. 0x1", |
| ], |
| }, |
| 'power_reading': |
| { |
| 'Get': |
| [ |
| # raw command, expected output(s), comment |
| "0x2c 0x02 0xdc 0x01 0x01 0x00", |
| "dc d5 00 d5 00 d5 00 d5 00 00 00 00 00 00 00 00 00 00", |
| "Byte position 2nd LSB e.g. d5 Instantaneous power readings", |
| ], |
| }, |
| 'conf_param': |
| { |
| 'Enabled': |
| [ |
| # raw command, expected output, comment |
| "0x2c 0x12 0xdc 0x02 0x00 0x01", |
| "dc", |
| "Enabled nibble position 6th LSB e.g. 0x01", |
| ], |
| 'Disabled': |
| [ |
| # raw command, expected output, comment |
| "0x2c 0x12 0xdc 0x02 0x00 0x00", |
| "dc", |
| "Disable nibble position 6th LSB e.g. 0x00", |
| ] |
| }, |
| 'SEL_entry': |
| { |
| 'Reserve': |
| [ |
| # raw command, expected output, comment |
| "0x0a 0x42", |
| "27 00", |
| "27 is Reservation ID, LSB, 00 Reservation ID, MSB ", |
| ], |
| 'Get_SEL_Time': |
| [ |
| # raw command |
| '0x0a 0x48', |
| ], |
| 'Set_SEL_Time': |
| [ |
| # raw command, expected output(s), comment |
| '0x0a 0x49', |
| 'rsp=0xd5', |
| 'not supported in present state', |
| 'rsp=0xc7', |
| 'Request data length invalid', |
| |
| ], |
| 'Create_SEL': |
| [ |
| # raw command |
| "0x0a 0x44 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x04", |
| "0x00 0xa0 0x04 0x07", |
| ], |
| }, |
| 'Self_Test_Results': |
| { |
| 'Get': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x04", |
| "56 00", |
| "56h = Self Test function not implemented in this controller.", |
| ] |
| }, |
| 'Device GUID': |
| { |
| 'Get': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x08", |
| "01 70 9b ae da 6f dd 9c b4 4c 36 be 66 c8 49 28", |
| "Get GUID bytes 1 through 16.", |
| |
| ] |
| }, |
| 'LAN_Config_Params': |
| { |
| 'Get': |
| [ |
| # raw command, expected output, comment |
| "0x0c 0x02", |
| "11 02", |
| "11 is Parameter revision, 02 is Configuration parameter data e.g. Cipher Suite Entry count", |
| ] |
| }, |
| 'Payload': |
| { |
| 'Get_Payload_Activation_Status': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x4a 0x01", |
| "01 00 00", |
| "1st byte is instance capacity, last two bytes is activation status of instances", |
| ], |
| 'Activate_Payload': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x48 0x01 0x01 0xc6 0x00 0x00 0x00", |
| "00 00 00 00 ff 00 ff 00 6f 02 ff ff", |
| "Last two bits are payload vlan number, - FFFFh if VLAN addressing is not used", |
| ], |
| 'Deactivate_Payload': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x49 0x01 0x01 0x00 0x00 0x00 0x00", |
| "", |
| "Line feed only", |
| ], |
| 'Get_Payload_Instance_Info': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x4b 0x01 0x01", |
| "00 00 00 00 00 00 00 00 00 00 00 00", |
| "When the payload is activated, the first four bytes are the session ID," |
| "otherwise it should be 00." |
| ] |
| }, |
| 'BIOS_POST_Code': |
| { |
| 'Get': |
| [ |
| # raw command, expected output, comment |
| "0x30 0xe9", |
| "", |
| "Response bytes will vary in length depending on state of system", |
| "0x89", |
| "error response byte when host is powered off" |
| ] |
| }, |
| 'Device ID': |
| { |
| 'Get': |
| [ |
| # raw command, error response, error code |
| "0x06 0x01", |
| "Error: Unable to establish IPMI v2 / RMCP+ session", |
| "0xc7", |
| ] |
| }, |
| 'Cold Reset': |
| { |
| 'reset': |
| [ |
| # raw command |
| "0x06 0x02" |
| ] |
| }, |
| 'lan_parameters': |
| { |
| 'get_ip': |
| [ |
| # raw command |
| "0x0c 0x02 0x01 0x03 0 0" |
| ], |
| 'get_ip_src': |
| [ |
| # raw command |
| "0x0c 0x02 0x01 0x04 0 0" |
| ], |
| 'get_dot1q': |
| [ |
| # raw command |
| "0x0c 0x02 0x01 0x14 0 0" |
| ] |
| }, |
| 'SDR_Info': |
| { |
| 'get': |
| [ |
| # raw command |
| "0x04 0x20 1" |
| ] |
| }, |
| 'Chassis_status': |
| { |
| 'get': |
| [ |
| # raw command |
| "0x00 0x01" |
| ] |
| }, |
| 'SEL_Info': |
| { |
| 'get': |
| [ |
| # raw command |
| "0x0a 0x40" |
| ] |
| }, |
| 'Watchdog': |
| { |
| # Command action type |
| 'Get': |
| [ |
| # raw command, expected output(s), comment |
| "0x06 0x25", |
| "05 00 00 00 64 00", |
| "don't log bit enabled", |
| "85 00 00 00 64 00", |
| "don't log bit disabled", |
| "05 00 00 00 64 00", |
| "stop bit stop", |
| "45 00 00 00 64 00", |
| "stop bit resume", |
| "01 00 00 00 64 00", |
| "timer use FRB2", |
| "02 00 00 00 64 00", |
| "timer use POST", |
| "03 00 00 00 64 00", |
| "timer use OS", |
| "04 00 00 00 64 00", |
| "timer use SMS", |
| "05 00 00 00 64 00", |
| "timer use OEM", |
| "05 00 00 00 64 00", |
| "pre-timeout interrupt None", |
| "05 20 00 00 64 00", |
| "pre-timeout interrupt NMI", |
| "05 00 00 00 64 00", |
| "timeout action None", |
| "05 01 00 00 64 00", |
| "timeout action Reset", |
| "05 02 00 00 64 00", |
| "timeout action PowerDown", |
| "05 03 00 00 64 00", |
| "timeout action PowerCycle", |
| "01 00 00 02 00 00", |
| "timeout flag FRB2", |
| "02 00 00 04 00 00", |
| "timeout flag POST", |
| "03 00 00 08 00 00", |
| "timeout flag OS", |
| "04 00 00 10 00 00", |
| "timeout flag SMS", |
| "05 00 00 20 00 00", |
| "timeout flag OEM", |
| "05 00 00 00 30 35 30 35", |
| "Get should return 13.6 seconds", |
| "05 00 00 00 ff ff ff ff", |
| "Bit 6 not set when timer stopped", |
| "0x06 0x25 0x00", |
| "Get with one extra byte", |
| ], |
| 'Set': |
| [ |
| # raw command, expected output, comment |
| "0x06 0x24 0x05 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "don't log bit enabled", |
| "0x06 0x24 0x85 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "don't log bit disabled", |
| "0x06 0x24 0x05 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "stop bit stop", |
| "0x06 0x24 0x45 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "stop bit resume", |
| "0x06 0x24 0x01 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timer use FRB2", |
| "0x06 0x24 0x02 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timer use POST", |
| "0x06 0x24 0x03 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timer use OS", |
| "0x06 0x24 0x04 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timer use SMS", |
| "0x06 0x24 0x05 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timer use OEM", |
| "0x06 0x24 0x05 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "pre-timeout interrupt None", |
| "0x06 0x24 0x05 0x20 0x00 0x00 0x64 0x00", |
| "none", |
| "pre-timeout interrupt NMI", |
| "0x06 0x24 0x05 0x00 0x00 0x00 0x64 0x00", |
| "none", |
| "timeout action None", |
| "0x06 0x24 0x05 0x01 0x00 0x00 0x64 0x00", |
| "none", |
| "timeout action Reset", |
| "0x06 0x24 0x05 0x02 0x00 0x00 0x64 0x00", |
| "none", |
| "timeout action PowerDown", |
| "0x06 0x24 0x05 0x03 0x00 0x00 0x64 0x00", |
| "none", |
| "timeout action PowerCycle", |
| "0x06 0x24 0x01 0x00 0x00 0x3e 0x00 0x00", |
| "none", |
| "timeout flag FRB2", |
| "0x06 0x24 0x02 0x00 0x00 0x3e 0x00 0x00", |
| "none", |
| "timeout flag POST", |
| "0x06 0x24 0x03 0x00 0x00 0x3e 0x00 0x00", |
| "none", |
| "timeout flag OS", |
| "0x06 0x24 0x04 0x00 0x00 0x3e 0x00 0x00", |
| "none", |
| "timeout flag SMS", |
| "0x06 0x24 0x05 0x00 0x00 0x3e 0x00 0x00", |
| "none", |
| "timeout flag OEM", |
| "0x06 0x24 0x01 0x02 0x00 0x00 0x20 0x00", |
| "none", |
| "Power down", |
| "0x06 0x24 0x01 0x01 0x00 0x00 0x20 0x00", |
| "none", |
| "Hard reset", |
| "0x06 0x24 0x01 0x03 0x00 0x00 0x20 0x00", |
| "none", |
| "Power cycle", |
| "0x06 0x24 0x01 0x00 0x00 0x00 0x20 0x00", |
| "none", |
| "No action", |
| "0x06 0x24 0x05 0x00 0x00 0x3e 0x30 0x35", |
| "none", |
| "Set for 13.6 seconds", |
| "0x06 0x24 0x05 0x00 0x07 0x00 0x50 0x00", |
| "none", |
| "Pre-timeout interval passes", |
| "0x06 0x24 0x05 0x00 0x04 0x00 0x0A 0x00", |
| "none", |
| "Pre-timeout interval fails", |
| "0x06 0x24 0x05 0x00 0x00 0x20 0xFF 0xFF", |
| "none", |
| "Bit 6 not set when timer stopped", |
| "0x06 0x24 0x05 0x00 0x08 0x00 0x64", |
| "none", |
| "Set with one less byte", |
| "0x06 0x24 0x05 0x00 0x08 0x00 0x64 0x00 0x00", |
| "none", |
| "Set with one extra byte", |
| ], |
| 'Reset': |
| [ |
| # raw command, expected output, comment |
| "0x06 0x22", |
| "none", |
| "Reset watchdog timer", |
| "0x06 0x22 0x00", |
| "none", |
| "Reset watchdog timer with extra byte", |
| "0x06 0x22", |
| "none", |
| "Reset watchdog timer without initialized watchdog", |
| ] |
| }, |
| 'SOL': |
| { |
| 'Set_SOL': |
| [ |
| # raw command, expected output(s), comment |
| 'Invalid value', |
| 'Valid values are serial, 9.6 19.2, 38.4, 57.6 and 115.2', |
| ], |
| } |
| } |