| *** Settings *** |
| Documentation This module provides general keywords for dump. |
| |
| Library bmc_ssh_utils.py |
| |
| *** Variables *** |
| |
| *** Keywords *** |
| |
| Create User Initiated Dump |
| [Documentation] Generate user initiated dump and return |
| ... the dump id number (e.g., "5"). Optionally return EMPTY |
| ... if out of dump space. |
| [Arguments] ${check_out_of_space}=${False} |
| |
| # Description of Argument(s): |
| # check_out_of_space If ${False}, a dump will be created and |
| # its dump_id will be returned. |
| # If ${True}, either the dump_id will be |
| # returned, or the value ${EMPTY} will be |
| # returned if out of dump space was |
| # detected when creating the dump. |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_URI} /xyz/openbmc_project/dump/ |
| |
| ${data}= Create Dictionary data=@{EMPTY} |
| ${resp}= OpenBMC Post Request |
| ... ${DUMP_URI}action/CreateDump data=${data} quiet=${1} |
| |
| Run Keyword If '${check_out_of_space}' == '${False}' |
| ... Run Keyword And Return Get The Dump Id ${resp} |
| ... ELSE |
| ... Run Keyword And Return Check For Too Many Dumps ${resp} |
| |
| |
| Get The Dump Id |
| [Documentation] Wait for the dump to be created. Return the |
| ... dump id number (e.g., "5"). |
| [Arguments] ${resp} |
| |
| # Description of Argument(s): |
| # resp Response object from action/Create Dump attempt. |
| # Example object: |
| # { |
| # "data": 5, |
| # "message": "200 OK", |
| # "status": "ok" |
| # }, |
| # The "data" field conveys the id number of the created dump. |
| |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_OK} |
| ${json}= To JSON ${resp.content} |
| |
| Run Keyword If ${json["data"]} == ${None} |
| ... Fail Dump id returned null. |
| |
| ${dump_id}= Set Variable ${json["data"]} |
| |
| Wait Until Keyword Succeeds 3 min 15 sec Check Dump Existence |
| ... ${dump_id} |
| |
| [Return] ${dump_id} |
| |
| |
| Check For Too Many Dumps |
| [Documentation] Return the dump_id number, or return ${EMPTY} if dump |
| ... creation failed due to too many dumps. |
| [Arguments] ${resp} |
| |
| # Description of Argument(s): |
| # resp Response object from action/Create Dump attempt. |
| # Example object if there are too many dumps: |
| # { |
| # "data": { |
| # "description": "xyz.openbmc_project.Dump.Create.Error.QuotaExceeded" |
| # }, |
| # "message": "Dump not captured due to a cap.", |
| # "status": "error" |
| # } |
| |
| # If dump was created normally, return the dump_id number. |
| Run Keyword If '${resp.status_code}' == '${HTTP_OK}' |
| ... Run Keyword And Return Get The Dump Id ${resp} |
| |
| ${json}= To JSON ${resp.content} |
| ${exception}= Set Variable ${json["message"]} |
| ${at_capacity}= Set Variable Dump not captured due to a cap |
| ${too_many_dumps}= Evaluate $at_capacity in $exception |
| Printn |
| Rprint Vars exception too_many_dumps |
| # If there are too many dumps, return ${EMPTY}, otherwise Fail. |
| ${status}= Run Keyword If ${too_many_dumps} Set Variable ${EMPTY} |
| ... ELSE Fail msg=${exception}. |
| |
| [Return] ${status} |
| |
| |
| Verify No Dump In Progress |
| [Documentation] Verify no dump in progress. |
| |
| ${dump_progress} ${stderr} ${rc}= BMC Execute Command ls /tmp |
| Should Not Contain ${dump_progress} obmcdump |
| |
| |
| Check Dump Existence |
| [Documentation] Verify if given dump exist. |
| [Arguments] ${dump_id} |
| |
| # Description of Argument(s): |
| # dump_id An integer value that identifies a particular dump |
| # object(e.g. 1, 3, 5). |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/ |
| |
| ${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}${dump_id} |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_OK} |
| |
| |
| Delete BMC Dump |
| [Documentation] Deletes a given bmc dump. |
| [Arguments] ${dump_id} |
| |
| # Description of Argument(s): |
| # dump_id An integer value that identifies a particular dump (e.g. 1, 3). |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/ |
| |
| ${data}= Create Dictionary data=@{EMPTY} |
| ${resp}= OpenBMC Post Request |
| ... ${DUMP_ENTRY_URI}${dump_id}/action/Delete data=${data} |
| |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_OK} |
| |
| Delete All Dumps |
| [Documentation] Delete all dumps. |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/ |
| |
| # Check if dump entries exist, if not return. |
| ${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list quiet=${1} |
| Return From Keyword If ${resp.status_code} == ${HTTP_NOT_FOUND} |
| |
| # Get the list of dump entries and delete them all. |
| ${dump_entries}= Get URL List ${DUMP_ENTRY_URI} |
| FOR ${entry} IN @{dump_entries} |
| ${dump_id}= Fetch From Right ${entry} / |
| Delete BMC Dump ${dump_id} |
| END |
| |
| |
| Redfish Delete BMC Dump |
| [Documentation] Deletes a given BMC dump via Redfish.. |
| [Arguments] ${dump_id} |
| |
| # Description of Argument(s): |
| # dump_id An integer value that identifies a particular dump (e.g. 1, 3). |
| |
| Redfish.Delete /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id} |
| |
| |
| Redfish Delete All BMC Dumps |
| [Documentation] Delete all BMC dumps via Redfish. |
| |
| # Check if dump entries exist, if not return. |
| ${resp}= Redfish.Get /redfish/v1/Managers/bmc/LogServices/Dump/Entries |
| Return From Keyword If ${resp.dict["Members@odata.count"]} == ${0} |
| |
| Redfish.Post /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.ClearLog |
| |
| |
| Redfish Delete All System Dumps |
| [Documentation] Delete all system dumps via Redfish. |
| |
| Redfish.Post /redfish/v1/Systems/system/LogServices/Dump/Actions/LogService.ClearLog |
| |
| |
| Delete All BMC Dump |
| [Documentation] Delete all BMC dump entries using "DeleteAll" interface. |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_URI} /xyz/openbmc_project/dump/ |
| |
| ${data}= Create Dictionary data=@{EMPTY} |
| ${resp}= Openbmc Post Request ${DUMP_URI}action/DeleteAll data=${data} |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_OK} |
| |
| Dump Should Not Exist |
| [Documentation] Verify that BMC dumps do not exist. |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/ |
| |
| ${resp}= OpenBMC Get Request ${DUMP_ENTRY_URI}list quiet=${1} |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND} |
| |
| Check Existence Of BMC Dump File |
| [Documentation] Verify existence of BMC dump file. |
| [Arguments] ${dump_id} |
| |
| # Description of argument(s): |
| # dump_id BMC dump identifier |
| |
| ${dump_check_cmd}= Set Variable |
| ... ls /var/lib/phosphor-debug-collector/dumps |
| |
| # Output of sample BMC Execute command with '2' as dump id is as follows |
| # ls /var/lib/phosphor-debug-collector/dumps/2 |
| # obmcdump_2_XXXXXXXXXX.tar.xz |
| ${file_there} ${stderr} ${rc}= BMC Execute Command |
| ... ${dump_check_cmd}/${dump_id} |
| Should End With ${file_there} tar.xz msg=BMC dump file not found. |
| |
| Get Dump Entries |
| [Documentation] Return dump entries list. |
| |
| ${resp}= OpenBMC Get Request ${DUMP_URI} |
| Run Keyword If '${resp.status_code}' == '${HTTP_NOT_FOUND}' |
| ... Set Global Variable ${DUMP_ENTRY_URI} /xyz/openbmc_project/dump/entry/ |
| |
| ${dump_entries}= Get URL List ${DUMP_ENTRY_URI} |
| [Return] ${dump_entries} |
| |
| Trigger Core Dump |
| [Documentation] Trigger core dump. |
| |
| # Find the pid of the active ipmid and kill it. |
| ${cmd_buf}= Catenate kill -s SEGV $(ps | egrep ' ipmid$' | |
| ... egrep -v grep | \ cut -c1-6) |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command ${cmd_buf} |
| Should Be Empty ${stderr} msg=BMC execute command error. |
| Should Be Equal As Integers ${rc} ${0} |
| ... msg=BMC execute command return code is not zero. |
| |
| Create User Initiated BMC Dump Using Redfish |
| [Documentation] Trigger user initiated BMC dump via Redfish and return task id. |
| |
| ${payload}= Create Dictionary DiagnosticDataType=Manager |
| ${resp}= Redfish.Post |
| ... /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData |
| ... body=${payload} valid_status_codes=[${HTTP_ACCEPTED}, ${HTTP_OK}] |
| |
| # Example of response from above Redfish POST request. |
| # "@odata.id": "/redfish/v1/TaskService/Tasks/0", |
| # "@odata.type": "#Task.v1_4_3.Task", |
| # "Id": "0", |
| # "TaskState": "Running", |
| # "TaskStatus": "OK" |
| |
| ${task_id}= Set Variable ${resp.dict['Id']} |
| [Return] ${task_id} |
| |
| Auto Generate BMC Dump |
| [Documentation] Auto generate BMC dump. |
| |
| ${cmd}= Catenate busctl --verbose call xyz.openbmc_project.Dump.Manager |
| ... /xyz/openbmc_project/dump/bmc xyz.openbmc_project.Dump.Create CreateDump a{ss} 0 |
| ${stdout} ${stderr} ${rc}= |
| ... BMC Execute Command ${cmd} |
| [Return] ${stdout} ${stderr} ${rc} |
| |
| Get Dump Size |
| [Documentation] Get dump size. |
| [Arguments] ${dump_uri} |
| |
| # Description of argument(s): |
| # dump_uri Dump URI |
| # (Eg. /xyz/openbmc_project/dump/bmc/entry/1). |
| |
| # Example of Dump entry. |
| # "data": { |
| # "CompletedTime": 1616760931, |
| # "Elapsed": 1616760931, |
| # "OffloadUri": "", |
| # "Offloaded": false, |
| # "Password": "", |
| # "Size": 3056, |
| # "SourceDumpId": 117440513, |
| # "StartTime": 1616760931, |
| # "Status": "xyz.openbmc_project.Common.Progress.OperationStatus.Completed", |
| # "VSPString": "" |
| # }, |
| |
| Log ${dump_uri} |
| ${dump_data}= Redfish.Get Properties ${dump_uri} |
| [Return] ${dump_data["data"]["Size"]} |
| |
| Get Dump ID |
| [Documentation] Return dump ID. |
| [Arguments] ${task_id} |
| |
| # Description of argument(s): |
| # task_id Task ID. |
| |
| # Example of HttpHeaders field of task details. |
| # "Payload": { |
| # "HttpHeaders": [ |
| # "Host: <BMC_IP>", |
| # "Accept-Encoding: identity", |
| # "Connection: Keep-Alive", |
| # "Accept: */*", |
| # "Content-Length: 33", |
| # "Location: /redfish/v1/Managers/bmc/LogServices/Dump/Entries/2"] |
| # ], |
| # "HttpOperation": "POST", |
| # "JsonBody": "{\"DiagnosticDataType\":\"Manager\"}", |
| # "TargetUri": |
| # "/redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData" |
| # } |
| |
| ${task_dict}= Redfish.Get Properties /redfish/v1/TaskService/Tasks/${task_id} |
| ${key} ${value}= Set Variable ${task_dict["Payload"]["HttpHeaders"][-1].split(":")} |
| Run Keyword If '${key}' != 'Location' Fail |
| [Return] ${value.split('/')[-1]} |
| |
| Get Task Status |
| [Documentation] Return task status. |
| [Arguments] ${task_id} |
| |
| # Description of argument(s): |
| # task_id Task ID. |
| |
| ${resp}= Redfish.Get Properties /redfish/v1/TaskService/Tasks/${task_id} |
| [Return] ${resp['TaskState']} |
| |
| Check Task Completion |
| [Documentation] Check if the task is complete. |
| [Arguments] ${task_id} |
| |
| # Description of argument(s): |
| # task_id Task ID. |
| |
| ${status}= Get Task Status ${task_id} |
| Run Keyword Unless '${status}' == 'Cancelled' or '${status}' == 'Completed' |
| ... Fail Task is still running. |
| [Return] ${status} |
| |
| Get Dump ID And Status |
| [Documentation] Return dump ID and status. |
| [Arguments] ${task_id} |
| |
| # Description of argument(s): |
| # task_id Task ID. |
| |
| ${task_status}= Wait Until Keyword Succeeds 10 min 15 sec Check Task Completion ${task_id} |
| ${dump_id}= Run Keyword If '${task_status}' == 'Completed' Get Dump ID ${task_id} |
| ... ELSE Set Variable None |
| [Return] ${dump_id} ${task_status} |