blob: 437d30fabfc0fce064985cfccf1533aa05822085 [file] [log] [blame]
*** Settings ***
Documentation eSEL's Test cases.
Resource ../lib/ipmi_client.robot
Resource ../lib/openbmc_ffdc.robot
Resource ../lib/utils.robot
Variables ../data/variables.py
Resource ../lib/utils.robot
Resource ../lib/boot_utils.robot
Suite Setup eSEL Test SetUp
Suite Teardown Test Cleanup On Exit
Test Teardown FFDC On Test Case Fail
Test Setup Delete All Error Logs
Force Tags eSEL_Logging
*** Variables ***
${stack_mode} skip
${RESERVE_ID} raw 0x0a 0x42
${RAW_PREFIX} raw 0x3a 0xf0 0x
${RAW_SUFFIX} 0x00 0x00 0x00 0x00 0x00 0x01 0x00 0x00
... 0xdf 0x00 0x00 0x00 0x00 0x20 0x00 0x04 0x12 0x35 0x6f 0xaa 0x00 0x00
${RAW_SEL_COMMIT} raw 0x0a 0x44 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x20
... 0x00 0x04 0x12 0xA6 0x6f 0x02 0x00 0x01
${LOGGING_SERVICE} xyz.openbmc_project.Logging.service
${ESEL_DATA} ESEL=00 00 df 00 00 00 00 20 00 04 12 35 6f aa 00 00
*** Test Cases ***
Verify eSEL Using REST
[Documentation] Generate eSEL log and verify using REST.
[Tags] Verify_eSEL_Using_REST
Create eSEL
# New eSEL log should exist
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}/list
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
Verify eSEL Entries Using REST
[Documentation] Verify that eSEL entries have data.
[Tags] Verify_eSEL_Entries_Using_REST
Create eSEL
Verify eSEL Entries
Verify Multiple eSEL Using REST
[Documentation] Generate multiple eSEL log and verify using REST.
[Tags] Verify_Multiple_eSEL_Using_REST
Create eSEL
Create eSEL
${entries}= Count eSEL Entries
# 1 eSEL creates 1 error log and 1 association.
Should Be Equal As Integers ${entries} ${4}
Check eSEL AdditionalData
[Documentation] Generate eSEL log and verify AdditionalData is
... not empty.
[Tags] Check_eSEL_AdditionalData
Create eSEL
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${resp}= OpenBMC Get Request ${elog_entry[0]}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
${jsondata}= To JSON ${resp.content}
# "/xyz/openbmc_project/logging/entry/1": {
# "Timestamp": 1487743771812,
# "AdditionalData": [],
# "Message": "org.open_power.Error.Host.Event.Event",
# "Id": 1,
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Emergency"
# }
Should Not Be Empty ${jsondata["data"]["AdditionalData"]}
Test Wrong Reservation_ID
[Documentation] This testcase is to test BMC can handle multi-requestor's
... oem partial add command with incorrect reservation id.
... It simulates sending partial add command with fake content
... and wrong Reservation ID. This command will be rejected.
[Tags] Test_Wrong_Reservation_ID
${rev_id_1}= Run Inband IPMI Raw Command 0x0a 0x42
${rev_id_ls}= Get Substring ${rev_id_1} 1 3
${rev_id_ms}= Get Substring ${rev_id_1} -2
Run Inband IPMI Raw Command 0x0a 0x42
${output}= Check IPMI OEMpartialadd Reject 0x3a 0xf0 0x${rev_id_ls} 0x${rev_id_ms} 0 0 0 0 0 1 2 3 4 5 6 7 8 9 0xa 0xb 0xc 0xd 0xe 0xf
Should Contain ${output} Reservation cancelled
Test Correct Reservation_ID
[Documentation] This testcase is to test BMC can handle multi-requestor's
... oem partial add command with correct reservation id. It
... simulates sending partial add command with fake content
... and correct Reservation ID. This command will be accepted.
[Tags] Test_Correct_Reservation_ID
Run Inband IPMI Raw Command 0x0a 0x42
${rev_id_2}= Run Inband IPMI Raw Command 0x0a 0x42
${rev_id_ls}= Get Substring ${rev_id_2} 1 3
${rev_id_ms}= Get Substring ${rev_id_2} -2
${output}= Check IPMI OEMpartialadd Accept 0x3a 0xf0 0x${rev_id_ls} 0x${rev_id_ms} 0 0 0 0 0 1 2 3 4 5 6 7 8 9 0xa 0xb 0xc 0xd 0xe 0xf
Should Be Empty ${output}
*** Keywords ***
Create eSEL
[Documentation] Create an eSEL.
Open Connection And Log In
${Resv_id}= Run Inband IPMI Standard Command ${RESERVE_ID}
${cmd}= Catenate
... ${RAW_PREFIX}${Resv_id.strip().rsplit(' ', 1)[0]} ${RAW_SUFFIX}
Run Inband IPMI Standard Command ${cmd}
Run Inband IPMI Standard Command ${RAW_SEL_COMMIT}
Count eSEL Entries
[Documentation] Count eSEL entries logged.
${resp}= OpenBMC Get Request ${BMC_LOGGING_ENTRY}
Should Be Equal As Strings ${resp.status_code} ${HTTP_OK}
${jsondata}= To JSON ${resp.content}
${count}= Get Length ${jsondata["data"]}
[Return] ${count}
Verify eSEL Entries
[Documentation] Verify eSEL entries logged.
${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY}
${resp}= OpenBMC Get Request ${elog_entry[0]}
# "data": {
# "AdditionalData": [
# "ESEL=00 00 df 00 00 00 00 20 00 04 12 35 6f aa 00 00 "
# ],
# "Id": 1,
# "Message": "org.open_power.Host.Error.Event",
# "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error",
# "Timestamp": 1485904869061
# }
${entry_id}= Read Attribute ${elog_entry[0]} message
Should Be Equal ${entry_id}
... org.open_power.Host.Error.Event
${entry_id}= Read Attribute ${elog_entry[0]} Severity
Should Be Equal ${entry_id}
... xyz.openbmc_project.Logging.Entry.Level.Error
Test Cleanup On Exit
[Documentation] Cleanup test logs and connection.
Close All Connections
Restart Logging Service
[Documentation] Restart Logging to clear eSEL log.
${MainPID} ${stderr}= Execute Command
... systemctl restart ${LOGGING_SERVICE} return_stderr=True
Should Be Empty ${stderr}
Sleep 10s reason=Wait for service to restart properly.
Run IPMI Command Returned
[Arguments] ${args}
${output_1}= Execute Command /tmp/ipmitool -I dbus raw ${args}
[Return] ${output_1}
Check IPMI OEMpartialadd Reject
[Arguments] ${args}
Login To OS Host ${OS_HOST} ${OS_USERNAME} ${OS_PASSWORD}
${stdout} ${stderr} ${output_2}= Execute Command ipmitool raw ${args}
... return_stdout=True return_stderr=True return_rc=True
[Return] ${stderr}
eSEL Test SetUp
[Documentation] Validates input parameters & check if HOST OS is up.
Should Not Be Empty
... ${OS_HOST} msg=You must provide DNS name/IP of the OS host.
Should Not Be Empty
... ${OS_USERNAME} msg=You must provide OS host user name.
Should Not Be Empty
... ${OS_PASSWORD} msg=You must provide OS host user password.
# Boot to OS.
REST Power On
Login To OS Host ${OS_HOST} ${OS_USERNAME} ${OS_PASSWORD}
Open Connection And Log In
Check IPMI OEMpartialadd Accept
[Arguments] ${args}
Login To OS Host ${OS_HOST} ${OS_USERNAME} ${OS_PASSWORD}
${stdout} ${stderr} ${output_3}= Execute Command ipmitool raw ${args}
... return_stdout=True return_stderr=True return_rc=True
Should Be Equal ${output_3} ${0} msg=${stderr}
[Return] ${stderr}