| *** Settings *** |
| Documentation Update the BMC code on a target BMC via Redifsh. |
| |
| # Test Parameters: |
| # IMAGE_FILE_PATH The path to the BMC image file. |
| # |
| # Firmware update states: |
| # Enabled Image is installed and either functional or active. |
| # Disabled Image installation failed or ready for activation. |
| # Updating Image installation currently in progress. |
| |
| Resource ../../lib/resource.robot |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/common_utils.robot |
| Resource ../../lib/code_update_utils.robot |
| Resource ../../lib/redfish_code_update_utils.robot |
| Resource ../../lib/utils.robot |
| Library ../../lib/gen_robot_valid.py |
| Library ../../lib/var_funcs.py |
| Library ../../lib/gen_robot_keyword.py |
| Library ../../lib/code_update_utils.py |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Redfish.Logout |
| Test Setup Printn |
| Test Teardown FFDC On Test Case Fail |
| |
| # Force the test to timedout to prevent test hanging. |
| Test Timeout 30 minutes |
| |
| Force Tags BMC_Code_Update |
| |
| *** Variables *** |
| |
| ${FORCE_UPDATE} ${0} |
| ${LOOP_COUNT} ${2} |
| ${DELETE_ERRLOGS} ${1} |
| |
| ${ACTIVATION_WAIT_TIMEOUT} 8 min |
| |
| *** Test Cases *** |
| |
| Redfish BMC Code Update |
| [Documentation] Update the firmware image. |
| [Tags] Redfish_BMC_Code_Update |
| |
| # Python module: get_version_tar(tar_file_path) |
| ${image_version}= code_update_utils.Get Version Tar ${IMAGE_FILE_PATH} |
| Rprint Vars image_version |
| |
| # Python module: get_bmc_release_info() |
| ${bmc_release_info}= utils.Get BMC Release Info |
| ${functional_version}= Set Variable ${bmc_release_info['version_id']} |
| Rprint Vars functional_version |
| |
| ${post_code_update_actions}= Get Post Boot Action |
| ${state}= Get Pre Reboot State |
| Rprint Vars state |
| |
| # Check if the existing firmware is functional. |
| Pass Execution If '${functional_version}' == '${image_version}' |
| ... The existing ${image_version} firmware is already functional. |
| |
| ${sw_inv}= Get Functional Firmware BMC image |
| ${nonfunctional_sw_inv}= Get Non Functional Firmware ${sw_inv} False |
| |
| # Redfish active software image API. |
| Run Keyword If ${num_records} > 0 |
| ... Run Keyword If '${nonfunctional_sw_inv['version']}' == '${image_version}' |
| ... Set Backup Firmware To Functional ${image_version} ${state} |
| |
| Print Timen Performing firmware update ${image_version}. |
| |
| Redfish Update Firmware |
| |
| |
| Redfish BMC Code Update Running And Backup Image With Same Firmware |
| [Documentation] Perform the firmware update with same image back to back, so that |
| ... the running (functional Image) and backup image (alternate image) |
| ... with same firmware. |
| [Tags] Redfish_BMC_Code_Update_Running_And_Backup_Image_With_Same_Firmware |
| |
| # Python module: get_version_tar(tar_file_path) |
| ${image_version}= code_update_utils.Get Version Tar ${IMAGE_FILE_PATH} |
| Rprint Vars image_version |
| |
| # Python module: get_bmc_release_info() |
| ${bmc_release_info}= utils.Get BMC Release Info |
| ${functional_version}= Set Variable ${bmc_release_info['version_id']} |
| Rprint Vars functional_version |
| |
| # First update. |
| Print Timen Performing firmware update ${image_version}. |
| Redfish Update Firmware |
| |
| # Second update. |
| Print Timen Performing firmware update ${image_version}. |
| Redfish Update Firmware |
| |
| |
| Redfish Firmware Update Loop |
| [Documentation] Update the same firmware image in loop. |
| [Tags] Redfish_Firmware_Update_Loop |
| [Template] Redfish Firmware Update In Loop |
| [Timeout] NONE |
| # Override default 30 minutes, Disabling timeout with NONE explicitly |
| # else this test will fail for longer loop runs. |
| |
| ${LOOP_COUNT} |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do the suite setup. |
| |
| Redfish.Login |
| # Delete BMC dump and Error logs. |
| Run Keyword And Ignore Error Redfish Delete All BMC Dumps |
| Run Keyword If ${DELETE_ERRLOGS} == ${1} |
| ... Run Keyword And Ignore Error Redfish Purge Event Log |
| # Checking for file existence. |
| Valid File Path IMAGE_FILE_PATH |
| |
| Redfish Power Off stack_mode=skip |
| |
| |
| Redfish Firmware Update In Loop |
| [Documentation] Update the firmware in loop. |
| [Arguments] ${update_loop_count} |
| |
| # Description of argument(s): |
| # update_loop_count This value is used to run the firmware update in loop. |
| |
| # Python module: get_version_tar(tar_file_path) |
| ${image_version}= code_update_utils.Get Version Tar ${IMAGE_FILE_PATH} |
| Rprint Vars image_version |
| |
| # Python module: get_bmc_release_info() |
| ${bmc_release_info}= utils.Get BMC Release Info |
| ${functional_version}= Set Variable ${bmc_release_info['version_id']} |
| Print Timen Starting firmware information: |
| Rprint Vars functional_version |
| |
| ${temp_update_loop_count}= Evaluate ${update_loop_count} + 1 |
| |
| FOR ${count} IN RANGE 1 ${temp_update_loop_count} |
| Print Timen ************************************** |
| Print Timen * The Current Loop Count is ${count} of ${update_loop_count} * |
| Print Timen ************************************** |
| Print Timen Performing firmware update ${image_version}. |
| Redfish Update Firmware |
| END |
| |
| |
| Delete BMC Image |
| [Documentation] Delete a BMC image from the BMC flash chip. |
| |
| ${software_object}= Get Non Running BMC Software Object |
| Delete Image And Verify ${software_object} ${VERSION_PURPOSE_BMC} |
| |
| |
| Activate Existing Firmware |
| [Documentation] Set firmware image to lower priority. |
| [Arguments] ${image_version} |
| |
| # Description of argument(s): |
| # image_version Version of image. |
| |
| ${software_inventory_record}= Get Software Inventory State By Version |
| ... ${image_version} |
| ${num_keys}= Get Length ${software_inventory_record} |
| |
| Rprint Vars software_inventory_record |
| |
| # If no software inventory record was found, there is no existing |
| # firmware for the given version and therefore no action to be taken. |
| Return From Keyword If not ${num_keys} |
| |
| # Check if the existing firmware is functional. |
| Pass Execution If ${software_inventory_record['functional']} |
| ... The existing ${image_version} firmware is already functional. |
| |
| # If existing firmware is not functional, then set the priority to least. |
| Print Timen The existing ${image_version} firmware is not yet functional. |
| Set BMC Image Priority To Least ${image_version} ${software_inventory_record} |
| |
| Pass Execution The existing ${image_version} firmware is now functional. |
| |
| |
| Get Image Priority |
| [Documentation] Get Current Image Priority. |
| [Arguments] ${image_version} |
| |
| # Description of argument(s): |
| # image_version The Firmware image version (e.g. 2.8.0-dev-1107-g512028d95). |
| |
| ${software_info}= Read Properties |
| ... ${SOFTWARE_VERSION_URI}/enumerate quiet=1 |
| # Get only the record associated with our image_version. |
| |
| ${software_info}= Filter Struct |
| ... ${software_info} [('Version', '${image_version}')] |
| # Convert from dict to list. |
| ${software_info}= Get Dictionary Values ${software_info} |
| |
| [Return] ${software_info[0]['Priority']} |
| |
| |
| Set BMC Image Priority To Least |
| [Documentation] Set BMC image priority to least value. |
| [Arguments] ${image_version} ${software_inventory} |
| |
| # Description of argument(s): |
| # image_version The Firmware image version (e.g. 2.8.0-dev-1107-g512028d95). |
| # software_inventory Software inventory details. |
| |
| ${least_priority}= Get Least Value Priority Image ${VERSION_PURPOSE_BMC} |
| ${cur_priority}= Get Image Priority ${image_version} |
| Rprint Vars least_priority cur_priority |
| |
| Return From Keyword If '${least_priority}' == ${cur_priority} |
| Set Host Software Property |
| ... ${SOFTWARE_VERSION_URI}${software_inventory['image_id']} |
| ... Priority ${least_priority} |
| |
| Redfish OBMC Reboot (off) |
| |
| |
| Set Backup Firmware To Functional |
| [Documentation] Set the backup firmware to functional. |
| [Arguments] ${image_version} ${state} |
| |
| # Description of argument(s): |
| # image_version Version of image. |
| # state Pre reboot state. |
| |
| Print Timen Switch to back up and rebooting. |
| Switch Backup Firmware Image To Functional |
| Wait For Reboot start_boot_seconds=${state['epoch_seconds']} |
| Redfish Verify BMC Version ${IMAGE_FILE_PATH} |
| Pass Execution The backup firmware image ${image_version} is now functional. |
| |
| |
| Redfish Update Firmware |
| [Documentation] Update the BMC firmware via redfish interface. |
| |
| ${post_code_update_actions}= Get Post Boot Action |
| ${state}= Get Pre Reboot State |
| Rprint Vars state |
| Run Keyword And Ignore Error Set ApplyTime policy=OnReset |
| |
| # Python module: get_member_list(resource_path) |
| ${before_inv_list}= redfish_utils.Get Member List /redfish/v1/UpdateService/FirmwareInventory |
| Log To Console Current images on the BMC before upload: ${before_inv_list} |
| |
| Print Timen Start uploading image to BMC. |
| Redfish Upload Image /redfish/v1/UpdateService ${IMAGE_FILE_PATH} |
| Print Timen Completed image upload to BMC. |
| |
| # Python module: get_member_list(resource_path) |
| ${after_inv_list}= redfish_utils.Get Member List /redfish/v1/UpdateService/FirmwareInventory |
| Log To Console Current images on the BMC after upload: ${after_inv_list} |
| |
| ${image_id}= Evaluate set(${after_inv_list}) - set(${before_inv_list}) |
| Should Not Be Empty ${image_id} |
| ${image_id}= Evaluate list(${image_id})[0].split('/')[-1] |
| Log To Console Firmware installation in progress with image id:: ${image_id} |
| |
| Wait Until Keyword Succeeds ${ACTIVATION_WAIT_TIMEOUT} 10 sec |
| ... Check Image Update Progress State match_state='Enabled' image_id=${image_id} |
| |
| # Python module: get_version_tar(tar_file_path) |
| ${tar_version}= code_update_utils.Get Version Tar ${IMAGE_FILE_PATH} |
| ${image_info}= Get Software Inventory State By Version ${tar_version} |
| |
| Run Key ${post_code_update_actions['${image_info["image_type"]}']['OnReset']} |
| Redfish.Login |
| Redfish Verify BMC Version ${IMAGE_FILE_PATH} |
| |