| *** Settings *** |
| Documentation Test Redfish LDAP user configuration. |
| |
| Library ../../lib/gen_robot_valid.py |
| Resource ../../lib/resource.robot |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Library ../../lib/gen_robot_valid.py |
| Resource ../../lib/bmc_network_utils.robot |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Run Keywords Restore LDAP Privilege AND Redfish.Logout |
| Test Teardown FFDC On Test Case Fail |
| |
| Force Tags LDAP_Test |
| |
| *** Variables *** |
| ${old_ldap_privilege} ${EMPTY} |
| &{old_account_service} &{EMPTY} |
| &{old_ldap_config} &{EMPTY} |
| ${hostname} ${EMPTY} |
| ${test_ip} 10.6.6.6 |
| ${test_mask} 255.255.255.0 |
| |
| ** Test Cases ** |
| |
| Verify LDAP Configuration Created |
| [Documentation] Verify that LDAP configuration created. |
| [Tags] Verify_LDAP_Configuration_Created |
| |
| Create LDAP Configuration |
| # Call 'Get LDAP Configuration' to verify that LDAP configuration exists. |
| Get LDAP Configuration ${LDAP_TYPE} |
| Sleep 10s |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP Service Disable |
| [Documentation] Verify that LDAP is disabled and that LDAP user cannot |
| ... login. |
| [Tags] Verify_LDAP_Service_Disable |
| |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${LDAP_TYPE}': {'ServiceEnabled': ${False}}} |
| Sleep 15s |
| ${resp}= Run Keyword And Return Status Redfish.Login ${LDAP_USER} |
| ... ${LDAP_USER_PASSWORD} |
| Should Be Equal ${resp} ${False} |
| ... msg=LDAP user was able to login even though the LDAP service was disabled. |
| Redfish.Logout |
| Redfish.Login |
| # Enabling LDAP so that LDAP user works. |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP Login With ServiceEnabled |
| [Documentation] Verify that LDAP Login with ServiceEnabled. |
| [Tags] Verify_LDAP_Login_With_ServiceEnabled |
| |
| Disable Other LDAP |
| # Actual service enablement. |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}} |
| Sleep 15s |
| # After update, LDAP login. |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP Login With Correct AuthenticationType |
| [Documentation] Verify that LDAP Login with right AuthenticationType. |
| [Tags] Verify_LDAP_Login_With_Correct_AuthenticationType |
| |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${ldap_type}': {'Authentication': {'AuthenticationType':'UsernameAndPassword'}}} |
| Sleep 15s |
| # After update, LDAP login. |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP Config Update With Incorrect AuthenticationType |
| [Documentation] Verify that invalid AuthenticationType is not updated. |
| [Tags] Verify_LDAP_Update_With_Incorrect_AuthenticationType |
| |
| ${body}= Catenate {'${ldap_type}': {'Authentication': {'AuthenticationType':'KerberosKeytab'}}} |
| |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body=${body} valid_status_codes=[400] |
| |
| |
| Verify LDAP Login With Correct LDAP URL |
| [Documentation] Verify LDAP Login with right LDAP URL. |
| [Tags] Verify_LDAP_Login_With_Correct_LDAP_URL |
| |
| Config LDAP URL ${LDAP_SERVER_URI} |
| |
| |
| Verify LDAP Config Update With Incorrect LDAP URL |
| [Documentation] Verify that LDAP Login fails with invalid LDAP URL. |
| [Tags] Verify_LDAP_Config_Update_With_Incorrect_LDAP_URL |
| [Teardown] Run Keywords Restore LDAP URL AND |
| ... FFDC On Test Case Fail |
| |
| Config LDAP URL ldap://1.2.3.4/ ${FALSE} |
| |
| Verify LDAP Configuration Exist |
| [Documentation] Verify that LDAP configuration is available. |
| [Tags] Verify_LDAP_Configuration_Exist |
| |
| ${resp}= Redfish.Get Attribute ${REDFISH_BASE_URI}AccountService |
| ... ${LDAP_TYPE} default=${EMPTY} |
| Should Not Be Empty ${resp} msg=LDAP configuration is not defined. |
| |
| |
| Verify LDAP User Login |
| [Documentation] Verify that LDAP user able to login into BMC. |
| [Tags] Verify_LDAP_User_Login |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP Service Available |
| [Documentation] Verify that LDAP service is available. |
| [Tags] Verify_LDAP_Service_Available |
| |
| @{ldap_configuration}= Get LDAP Configuration ${LDAP_TYPE} |
| Should Contain ${ldap_configuration} LDAPService |
| ... msg=LDAPService is not available. |
| |
| |
| Verify LDAP Login Works After BMC Reboot |
| [Documentation] Verify that LDAP login works after BMC reboot. |
| [Tags] Verify_LDAP_Login_Works_After_BMC_Reboot |
| |
| Redfish OBMC Reboot (off) |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP User With Admin Privilege Able To Do BMC Reboot |
| [Documentation] Verify that LDAP user with administrator privilege able to do BMC reboot. |
| [Tags] Verify_LDAP_User_With_Admin_Privilege_Able_To_Do_BMC_Reboot |
| |
| |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... ${GROUP_PRIVILEGE} ${GROUP_NAME} |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| # With LDAP user and with right privilege trying to do BMC reboot. |
| Redfish OBMC Reboot (off) |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify LDAP User With Operator Privilege Able To Do Host Poweroff |
| [Documentation] Verify that LDAP user with operator privilege can do host |
| ... power off. |
| [Tags] Verify_LDAP_User_With_Operator_Privilege_Able_To_Do_Host_Poweroff |
| [Teardown] Restore LDAP Privilege |
| |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... Operator ${GROUP_NAME} |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| # Verify that the LDAP user with operator privilege is able to power the system off. |
| Redfish.Post ${REDFISH_POWER_URI} |
| ... body={'ResetType': 'ForceOff'} valid_status_codes=[200] |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Verify AccountLockout Attributes Set To Zero |
| [Documentation] Verify that attribute AccountLockoutDuration and |
| ... AccountLockoutThreshold are set to 0. |
| [Teardown] Run Keywords Restore AccountLockout Attributes AND |
| ... FFDC On Test Case Fail |
| [Tags] Verify_AccountLockout_Attributes_Set_To_Zero |
| |
| ${old_account_service}= Redfish.Get Properties |
| ... ${REDFISH_BASE_URI}AccountService |
| Rprint Vars old_account_service |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body=[('AccountLockoutDuration', 0)] |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body=[('AccountLockoutThreshold', 0)] |
| |
| |
| Verify LDAP User With Read Privilege Able To Check Inventory |
| [Documentation] Verify that LDAP user with read privilege able to |
| ... read firmware inventory. |
| [Tags] Verify_LDAP_User_With_Read_Privilege_Able_To_Check_Inventory |
| [Teardown] Run Keywords FFDC On Test Case Fail AND Restore LDAP Privilege |
| [Template] Set Read Privilege And Check Firmware Inventory |
| |
| ReadOnly |
| |
| |
| Verify LDAP User With Read Privilege Should Not Do Host Poweron |
| [Documentation] Verify that LDAP user with read privilege should not be |
| ... allowed to power on the host. |
| [Tags] Verify_LDAP_User_With_Read_Privilege_Should_Not_Do_Host_Poweron |
| [Teardown] Run Keywords FFDC On Test Case Fail AND Restore LDAP Privilege |
| [Template] Set Read Privilege And Check Poweron |
| |
| ReadOnly |
| |
| |
| Update LDAP Group Name And Verify Operations |
| [Documentation] Verify that LDAP group name update and able to do right |
| ... operations. |
| [Tags] Update_LDAP_Group_Name_And_Verify_Operations |
| [Template] Update LDAP Config And Verify Set Host Name |
| [Teardown] Restore LDAP Privilege |
| |
| # group_name group_privilege valid_status_codes |
| ${GROUP_NAME} Administrator [${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| ${GROUP_NAME} Operator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| ${GROUP_NAME} ReadOnly [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| ${GROUP_NAME} NoAccess [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| Invalid_LDAP_Group_Name Administrator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| Invalid_LDAP_Group_Name Operator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| Invalid_LDAP_Group_Name ReadOnly [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| Invalid_LDAP_Group_Name NoAccess [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}] |
| |
| |
| Verify LDAP BaseDN Update And LDAP Login |
| [Documentation] Update LDAP BaseDN of LDAP configuration and verify |
| ... that LDAP login works. |
| [Tags] Verify_LDAP_BaseDN_Update_And_LDAP_Login |
| |
| |
| ${body}= Catenate {'${LDAP_TYPE}': { 'LDAPService': {'SearchSettings': |
| ... {'BaseDistinguishedNames': ['${LDAP_BASE_DN}']}}}} |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body} |
| Sleep 15s |
| Redfish Verify LDAP Login |
| |
| |
| Verify LDAP BindDN Update And LDAP Login |
| [Documentation] Update LDAP BindDN of LDAP configuration and verify |
| ... that LDAP login works. |
| [Tags] Verify_LDAP_BindDN_Update_And_LDAP_Login |
| |
| ${body}= Catenate {'${LDAP_TYPE}': { 'Authentication': |
| ... {'AuthenticationType':'UsernameAndPassword', 'Username': |
| ... '${LDAP_BIND_DN}'}}} |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body} |
| Sleep 15s |
| Redfish Verify LDAP Login |
| |
| |
| Verify LDAP BindDN Password Update And LDAP Login |
| [Documentation] Update LDAP BindDN password of LDAP configuration and |
| ... verify that LDAP login works. |
| [Tags] Verify_LDAP_BindDN_Passsword_Update_And_LDAP_Login |
| |
| |
| ${body}= Catenate {'${LDAP_TYPE}': { 'Authentication': |
| ... {'AuthenticationType':'UsernameAndPassword', 'Password': |
| ... '${LDAP_BIND_DN_PASSWORD}'}}} |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body} |
| Sleep 15s |
| Redfish Verify LDAP Login |
| |
| |
| Verify LDAP Type Update And LDAP Login |
| [Documentation] Update LDAP type of LDAP configuration and verify |
| ... that LDAP login works. |
| [Tags] Verify_LDAP_Type_Update_And_LDAP_Login |
| |
| Disable Other LDAP |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}} |
| Sleep 15s |
| Redfish Verify LDAP Login |
| |
| |
| Verify Authorization With Null Privilege |
| [Documentation] Verify the failure of LDAP authorization with empty |
| ... privilege. |
| [Tags] Verify_LDAP_Authorization_With_Null_Privilege |
| [Teardown] Restore LDAP Privilege |
| |
| Update LDAP Config And Verify Set Host Name ${GROUP_NAME} ${EMPTY} |
| ... [${HTTP_FORBIDDEN}] |
| |
| |
| Verify Authorization With Invalid Privilege |
| [Documentation] Verify that LDAP user authorization with wrong privilege |
| ... fails. |
| [Tags] Verify_LDAP_Authorization_With_Invalid_Privilege |
| [Teardown] Restore LDAP Privilege |
| |
| Update LDAP Config And Verify Set Host Name ${GROUP_NAME} |
| ... Invalid_Privilege [${HTTP_FORBIDDEN}] |
| |
| |
| Verify LDAP Login With Invalid Data |
| [Documentation] Verify that LDAP login with Invalid LDAP data and |
| ... right LDAP user fails. |
| [Tags] Verify_LDAP_Login_With_Invalid_Data |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} Invalid_LDAP_Server_URI |
| ... Invalid_LDAP_BIND_DN LDAP_BIND_DN_PASSWORD |
| ... Invalid_LDAP_BASE_DN |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify LDAP Config Creation Without BASE_DN |
| [Documentation] Verify that LDAP login with LDAP configuration |
| ... created without BASE_DN fails. |
| [Tags] Verify_LDAP_Config_Creation_Without_BASE_DN |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} Invalid_LDAP_Server_URI |
| ... Invalid_LDAP_BIND_DN LDAP_BIND_DN_PASSWORD ${EMPTY} |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify LDAP Authentication Without Password |
| [Documentation] Verify that LDAP user authentication without LDAP |
| ... user password fails. |
| [Tags] Verify_LDAP_Authentication_Without_Password |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login |
| |
| ${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER} |
| Valid Value status [${False}] |
| |
| |
| Verify LDAP Login With Invalid BASE_DN |
| [Documentation] Verify that LDAP login with invalid BASE_DN and |
| ... valid LDAP user fails. |
| [Tags] Verify_LDAP_Login_With_Invalid_BASE_DN |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI} |
| ... ${LDAP_BIND_DN} ${LDAP_BIND_DN_PASSWORD} Invalid_LDAP_BASE_DN |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify LDAP Login With Invalid BIND_DN_PASSWORD |
| [Documentation] Verify that LDAP login with invalid BIND_DN_PASSWORD and |
| ... valid LDAP user fails. |
| [Tags] Verify_LDAP_Login_With_Invalid_BIND_DN_PASSWORD |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI} |
| ... ${LDAP_BIND_DN} INVALID_LDAP_BIND_DN_PASSWORD ${LDAP_BASE_DN} |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify LDAP Login With Invalid BASE_DN And Invalid BIND_DN |
| [Documentation] Verify that LDAP login with invalid BASE_DN and invalid |
| ... BIND_DN and valid LDAP user fails. |
| [Tags] Verify_LDAP_Login_With_Invalid_BASE_DN_And_Invalid_BIND_DN |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI} |
| ... INVALID_LDAP_BIND_DN ${LDAP_BIND_DN_PASSWORD} INVALID_LDAP_BASE_DN |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify Group Name And Group Privilege Able To Modify |
| [Documentation] Verify that LDAP group name and group privilege able to |
| ... modify. |
| [Tags] Verify_Group_Name_And_Group_Privilege_Able_To_Modify |
| [Setup] Update LDAP Configuration with LDAP User Role And Group |
| ... ${LDAP_TYPE} Operator ${GROUP_NAME} |
| |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... Administrator ${GROUP_NAME} |
| |
| |
| Verify LDAP Login With Invalid BIND_DN |
| [Documentation] Verify that LDAP login with invalid BIND_DN and |
| ... valid LDAP user fails. |
| [Tags] Verify_LDAP_Login_With_Invalid_BIND_DN |
| [Teardown] Run Keywords FFDC On Test Case Fail AND |
| ... Create LDAP Configuration |
| |
| Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI} |
| ... Invalid_LDAP_BIND_DN ${LDAP_BIND_DN_PASSWORD} ${LDAP_BASE_DN} |
| Sleep 15s |
| Redfish Verify LDAP Login ${False} |
| |
| |
| Verify LDAP Authentication With Invalid LDAP User |
| [Documentation] Verify that LDAP user authentication for user not exist |
| ... in LDAP server and fails. |
| [Tags] Verify_LDAP_Authentication_With_Invalid_LDAP_User |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login |
| |
| ${status}= Run Keyword And Return Status Redfish.Login INVALID_LDAP_USER |
| ... ${LDAP_USER_PASSWORD} |
| Valid Value status [${False}] |
| |
| |
| Update LDAP User Roles And Verify Host Poweroff Operation |
| [Documentation] Update LDAP user roles and verify host poweroff operation. |
| [Tags] Update_LDAP_User_Roles_And_Verify_Host_Poweroff_Operation |
| [Teardown] Restore LDAP Privilege |
| |
| [Template] Update LDAP User Role And Host Poweroff |
| # ldap_type group_privilege group_name valid_status_codes |
| |
| # Verify LDAP user with NoAccess privilege not able to do host poweroff. |
| ${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with ReadOnly privilege not able to do host poweroff. |
| ${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with Operator privilege able to do host poweroff. |
| ${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK} |
| |
| # Verify LDAP user with Administrator privilege able to do host poweroff. |
| ${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK} |
| |
| |
| Update LDAP User Roles And Verify Host Poweron Operation |
| [Documentation] Update LDAP user roles and verify host poweron operation. |
| [Tags] Update_LDAP_User_Roles_And_Verify_Host_Poweron_Operation |
| [Teardown] Restore LDAP Privilege |
| |
| [Template] Update LDAP User Role And Host Poweron |
| # ldap_type group_privilege group_name valid_status_codes |
| |
| # Verify LDAP user with NoAccess privilege not able to do host poweron. |
| ${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with ReadOnly privilege not able to do host poweron. |
| ${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with Operator privilege able to do host poweron. |
| ${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK} |
| |
| # Verify LDAP user with Administrator privilege able to do host poweron. |
| ${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK} |
| |
| |
| Configure IP Address Via Different User Roles And Verify |
| [Documentation] Configure IP address via different user roles and verify. |
| [Tags] Configure_IP_Address_Via_Different_User_Roles_And_Verify |
| [Teardown] Restore LDAP Privilege |
| |
| [Template] Update LDAP User Role And Configure IP Address |
| # Verify LDAP user with Administrator privilege is able to configure IP address. |
| ${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK} |
| |
| # Verify LDAP user with ReadOnly privilege is forbidden to configure IP address. |
| ${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with NoAccess privilege is forbidden to configure IP address. |
| ${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with Operator privilege is able to configure IP address. |
| ${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK} |
| |
| |
| Delete IP Address Via Different User Roles And Verify |
| [Documentation] Delete IP address via different user roles and verify. |
| [Tags] Delete_IP_Address_Via_Different_User_Roles_And_Verify |
| [Teardown] Run Keywords Restore LDAP Privilege AND FFDC On Test Case Fail |
| |
| [Template] Update LDAP User Role And Delete IP Address |
| # Verify LDAP user with Administrator privilege is able to delete IP address. |
| ${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK} |
| |
| # Verify LDAP user with ReadOnly privilege is forbidden to delete IP address. |
| ${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with NoAccess privilege is forbidden to delete IP address. |
| ${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| # Verify LDAP user with Operator privilege is able to delete IP address. |
| ${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK} |
| |
| |
| Read Network Configuration Via Different User Roles And Verify |
| [Documentation] Read network configuration via different user roles and verify. |
| [Tags] Read_Network_configuration_Via_Different_User_Roles_And_Verify |
| [Teardown] Restore LDAP Privilege |
| |
| [Template] Update LDAP User Role And Read Network Configuration |
| ${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK} |
| |
| ${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_OK} |
| |
| ${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN} |
| |
| ${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK} |
| |
| |
| *** Keywords *** |
| |
| Redfish Verify LDAP Login |
| [Documentation] LDAP user log into BMC. |
| [Arguments] ${valid_status}=${True} |
| |
| # Description of argument(s): |
| # valid_status Expected status of LDAP login ("True" or "False"). |
| |
| # According to our repo coding rules, Redfish.Login is to be done in Suite |
| # Setup and Redfish.Logout is to be done in Suite Teardown. For any |
| # deviation from this rule (such as in this keyword), the deviant code |
| # must take steps to restore us to our original logged-in state. |
| |
| ${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER} |
| ... ${LDAP_USER_PASSWORD} |
| Valid Value status [${valid_status}] |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Update LDAP Config And Verify Set Host Name |
| [Documentation] Update LDAP config and verify by attempting to set host name. |
| [Arguments] ${group_name} ${group_privilege}=Administrator |
| ... ${valid_status_codes}=[${HTTP_OK}] |
| |
| # Description of argument(s): |
| # group_name The group name of user. |
| # group_privilege The group privilege ("Administrator", |
| # "Operator", "User" or "Callback"). |
| # valid_status_codes Expected return code(s) from patch |
| # operation (e.g. "200") used to update |
| # HostName. See prolog of rest_request |
| # method in redfish_plut.py for details. |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... ${group_privilege} ${group_name} |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| # Verify that the LDAP user in ${group_name} with the given privilege is |
| # allowed to change the hostname. |
| Redfish.Patch ${REDFISH_NW_ETH0_URI} body={'HostName': '${hostname}'} |
| ... valid_status_codes=${valid_status_codes} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Disable Other LDAP |
| [Documentation] Disable other LDAP configuration. |
| |
| # First disable other LDAP. |
| ${inverse_ldap_type}= Set Variable If '${LDAP_TYPE}' == 'LDAP' ActiveDirectory LDAP |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${inverse_ldap_type}': {'ServiceEnabled': ${False}}} |
| Sleep 15s |
| |
| |
| Create LDAP Configuration |
| [Documentation] Create LDAP configuration. |
| [Arguments] ${ldap_type}=${LDAP_TYPE} ${ldap_server_uri}=${LDAP_SERVER_URI} |
| ... ${ldap_bind_dn}=${LDAP_BIND_DN} ${ldap_bind_dn_password}=${LDAP_BIND_DN_PASSWORD} |
| ... ${ldap_base_dn}=${LDAP_BASE_DN} |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # ldap_server_uri LDAP server uri (e.g. ldap://XX.XX.XX.XX). |
| # ldap_bind_dn The LDAP bind distinguished name. |
| # ldap_bind_dn_password The LDAP bind distinguished name password. |
| # ldap_base_dn The LDAP base distinguished name. |
| |
| ${body}= Catenate {'${ldap_type}': |
| ... {'ServiceEnabled': ${True}, |
| ... 'ServiceAddresses': ['${ldap_server_uri}'], |
| ... 'Authentication': |
| ... {'AuthenticationType': 'UsernameAndPassword', |
| ... 'Username':'${ldap_bind_dn}', |
| ... 'Password': '${ldap_bind_dn_password}'}, |
| ... 'LDAPService': |
| ... {'SearchSettings': |
| ... {'BaseDistinguishedNames': ['${ldap_base_dn}']}}}} |
| |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body} |
| Sleep 15s |
| |
| |
| Config LDAP URL |
| [Documentation] Config LDAP URL. |
| [Arguments] ${ldap_server_uri}=${LDAP_SERVER_URI} ${expected_status}=${TRUE} |
| |
| # Description of argument(s): |
| # ldap_server_uri LDAP server uri (e.g. "ldap://XX.XX.XX.XX/"). |
| |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${ldap_type}': {'ServiceAddresses': ['${ldap_server_uri}']}} |
| Sleep 15s |
| # After update, LDAP login. |
| ${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Valid Value status [${expected_status}] |
| |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Restore LDAP URL |
| [Documentation] Restore LDAP URL. |
| |
| # Restoring the working LDAP server uri. |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body={'${ldap_type}': {'ServiceAddresses': ['${LDAP_SERVER_URI}']}} |
| Sleep 15s |
| |
| |
| Restore AccountLockout Attributes |
| [Documentation] Restore AccountLockout Attributes. |
| |
| Return From Keyword If &{old_account_service} == &{EMPTY} |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body=[('AccountLockoutDuration', ${old_account_service['AccountLockoutDuration']})] |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService |
| ... body=[('AccountLockoutDuration', ${old_account_service['AccountLockoutThreshold']})] |
| |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup tasks. |
| |
| Valid Value LDAP_TYPE valid_values=["ActiveDirectory", "LDAP"] |
| Valid Value LDAP_USER |
| Valid Value LDAP_USER_PASSWORD |
| Valid Value GROUP_PRIVILEGE |
| Valid Value GROUP_NAME |
| Valid Value LDAP_SERVER_URI |
| Valid Value LDAP_BIND_DN_PASSWORD |
| Valid Value LDAP_BIND_DN |
| Valid Value LDAP_BASE_DN |
| |
| Redfish.Login |
| # Call 'Get LDAP Configuration' to verify that LDAP configuration exists. |
| Get LDAP Configuration ${LDAP_TYPE} |
| ${old_ldap_privilege}= Get LDAP Privilege |
| Set Suite Variable ${old_ldap_privilege} |
| Disable Other LDAP |
| Create LDAP Configuration |
| ${hostname}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName |
| |
| |
| Set Read Privilege And Check Firmware Inventory |
| [Documentation] Set read privilege and check firmware inventory. |
| [Arguments] ${read_privilege} |
| |
| # Description of argument(s): |
| # read_privilege The read privilege role (e.g. "User" / "Callback"). |
| |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... ${read_privilege} ${GROUP_NAME} |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| # Verify that the LDAP user with read privilege is able to read inventory. |
| ${resp}= Redfish.Get /redfish/v1/UpdateService/FirmwareInventory |
| Should Be True ${resp.dict["Members@odata.count"]} >= ${1} |
| Length Should Be ${resp.dict["Members"]} ${resp.dict["Members@odata.count"]} |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Set Read Privilege And Check Poweron |
| [Documentation] Set read privilege and power on should not be possible. |
| [Arguments] ${read_privilege} |
| |
| # Description of argument(s): |
| # read_privilege The read privilege role (e.g. "User" / "Callback"). |
| |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... ${read_privilege} ${GROUP_NAME} |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Post ${REDFISH_POWER_URI} |
| ... body={'ResetType': 'On'} valid_status_codes=[401, 403] |
| Redfish.Logout |
| Redfish.Login |
| |
| |
| Get LDAP Configuration |
| [Documentation] Retrieve LDAP Configuration. |
| [Arguments] ${ldap_type} |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| |
| ${ldap_config}= Redfish.Get Properties ${REDFISH_BASE_URI}AccountService |
| [Return] ${ldap_config["${ldap_type}"]} |
| |
| |
| Update LDAP Configuration with LDAP User Role And Group |
| [Documentation] Update LDAP configuration update with LDAP user Role and group. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "User" or "Callback"). |
| # group_name The group name of user. |
| |
| ${local_role_remote_group}= Create Dictionary LocalRole=${group_privilege} RemoteGroup=${group_name} |
| ${remote_role_mapping}= Create List ${local_role_remote_group} |
| ${ldap_data}= Create Dictionary RemoteRoleMapping=${remote_role_mapping} |
| ${payload}= Create Dictionary ${ldap_type}=${ldap_data} |
| Redfish.Patch ${REDFISH_BASE_URI}AccountService body=&{payload} |
| # Provide adequate time for LDAP daemon to restart after the update. |
| Sleep 15s |
| |
| |
| Get LDAP Privilege |
| [Documentation] Get LDAP privilege and return it. |
| |
| ${ldap_config}= Get LDAP Configuration ${LDAP_TYPE} |
| ${num_list_entries}= Get Length ${ldap_config["RemoteRoleMapping"]} |
| Return From Keyword If ${num_list_entries} == ${0} @{EMPTY} |
| |
| [Return] ${ldap_config["RemoteRoleMapping"][0]["LocalRole"]} |
| |
| |
| Restore LDAP Privilege |
| [Documentation] Restore the LDAP privilege to its original value. |
| |
| Return From Keyword If '${old_ldap_privilege}' == '${EMPTY}' or '${old_ldap_privilege}' == '[]' |
| # Log back in to restore the original privilege. |
| Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE} |
| ... ${old_ldap_privilege} ${GROUP_NAME} |
| |
| Sleep 18s |
| |
| |
| Update LDAP User Role And Host Poweroff |
| [Documentation] Update LDAP user role and do host poweroff. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess"). |
| # group_name The group name of user. |
| # valid_status_code The expected valid status code. |
| |
| Update LDAP Configuration with LDAP User Role And Group ${ldap_type} |
| ... ${group_privilege} ${group_name} |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| Redfish.Post ${REDFISH_POWER_URI} |
| ... body={'ResetType': 'ForceOff'} valid_status_codes=[${valid_status_code}] |
| |
| |
| Update LDAP User Role And Host Poweron |
| [Documentation] Update LDAP user role and do host poweron. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess"). |
| # group_name The group name of user. |
| # valid_status_code The expected valid status code. |
| |
| Update LDAP Configuration with LDAP User Role And Group ${ldap_type} |
| ... ${group_privilege} ${group_name} |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| Redfish.Post ${REDFISH_POWER_URI} |
| ... body={'ResetType': 'On'} valid_status_codes=[${valid_status_code}] |
| |
| |
| Update LDAP User Role And Configure IP Address |
| [Documentation] Update LDAP user role and configure IP address. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login AND Delete IP Address ${test_ip} |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess"). |
| # group_name The group name of user. |
| # valid_status_code The expected valid status code. |
| |
| Update LDAP Configuration with LDAP User Role And Group ${ldap_type} |
| ... ${group_privilege} ${group_name} |
| |
| Redfish.Logout |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| ${test_gateway}= Get BMC Default Gateway |
| |
| Add IP Address ${test_ip} ${test_mask} ${test_gateway} ${valid_status_code} |
| |
| |
| Update LDAP User Role And Delete IP Address |
| [Documentation] Update LDAP user role and delete IP address. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login AND Delete IP Address ${test_ip} |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess"). |
| # group_name The group name of user. |
| # valid_status_code The expected valid status code. |
| |
| ${test_gateway}= Get BMC Default Gateway |
| |
| # Configure IP address before deleting via LDAP user roles. |
| Add IP Address ${test_ip} ${test_mask} ${test_gateway} |
| |
| Update LDAP Configuration with LDAP User Role And Group ${ldap_type} |
| ... ${group_privilege} ${group_name} |
| |
| Redfish.Logout |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| Delete IP Address ${test_ip} ${valid_status_code} |
| |
| |
| Update LDAP User Role And Read Network Configuration |
| [Documentation] Update LDAP user role and read network configuration. |
| [Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login |
| |
| # Description of argument(s): |
| # ldap_type The LDAP type ("ActiveDirectory" or "LDAP"). |
| # group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess"). |
| # group_name The group name of user. |
| # valid_status_code The expected valid status code. |
| |
| Update LDAP Configuration with LDAP User Role And Group ${ldap_type} |
| ... ${group_privilege} ${group_name} |
| |
| Redfish.Logout |
| |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| Redfish.Get ${REDFISH_NW_ETH0_URI} valid_status_codes=[${valid_status_code}] |
| |