blob: 2d2d40b4d5abded7832a19de444e6c8e749d8227 [file] [log] [blame]
*** Settings ***
Documentation Suite to test hardware sensors.
Resource ../lib/utils.robot
Resource ../lib/boot_utils.robot
Resource ../lib/state_manager.robot
Resource ../lib/openbmc_ffdc.robot
Resource ../lib/ipmi_client.robot
Variables ../data/ipmi_raw_cmd_table.py
Suite Setup Suite Setup Execution
Test Teardown Test Teardown Execution
*** Test Cases ***
Verify System Ambient Temperature
[Documentation] Check the ambient sensor temperature.
[Tags] Verify_System_Ambient_Temperature
# Example:
# /xyz/openbmc_project/sensors/temperature/ambient
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 25767
# }
${temp_data}= Read Properties ${SENSORS_URI}temperature/ambient
Should Be True ${temp_data["Scale"]} == ${-3}
Should Be Equal As Strings
... ${temp_data["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
Should Be True ${temp_data["Value"]/1000} <= ${50}
... msg=System working temperature crossed 50 degree celsius.
Verify Fan Sensors Attributes
[Documentation] Check fan attributes.
[Tags] Verify_Fan_Sensor_Attributes
# Example:
# /xyz/openbmc_project/sensors/fan_tach/fan0
# /xyz/openbmc_project/sensors/fan_tach/fan1
# /xyz/openbmc_project/sensors/fan_tach/fan2
# /xyz/openbmc_project/sensors/fan_tach/fan3
${fans}= Get Endpoint Paths /xyz/openbmc_project/sensors/ fan*
# Access the properties of the fan and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/fan_tach/fan0
# {
# "Scale": 0,
# "Target": 0,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.RPMS",
# "Value": 0
# }
FOR ${entry} IN @{fans}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} >= 0
Run Keyword And Ignore Error Should Be True ${json["data"]["Target"]} >= 0
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.RPMS
Should Be True ${json["data"]["Value"]} >= 0
END
Verify PCIE Sensors Attributes
[Documentation] Probe PCIE attributes.
[Tags] Verify_PCIE_Sensor_Attributes
# Example:
# /xyz/openbmc_project/sensors/temperature/pcie
${temp_pcie}= Get Endpoint Paths /xyz/openbmc_project/sensors/ pcie
# Access the properties of the PCIE and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/temperature/pcie
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 29625
# }
FOR ${entry} IN @{temp_pcie}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
${temp_in_DegreeC}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${temp_in_DegreeC} > 0
END
Verify Rail Voltage Sensors Attributes
[Documentation] Check rail voltage attributes.
[Tags] Verify_Rail_Voltage_Sensor_Attributes
# Example of one of the entries returned by 'Get Endpoint Paths':
# /xyz/openbmc_project/sensors/voltage/rail_1_voltage
# /xyz/openbmc_project/sensors/voltage/rail_2_voltage
${temp_rail}= Get Endpoint Paths /xyz/openbmc_project/sensors/ rail*
# Example:
# Access the properties of the rail voltage and it should contain
# the following entries:
# "/xyz/openbmc_project/sensors/voltage/rail_1_voltage":
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Volts",
# "Value": 5097
# },
FOR ${entry} IN @{temp_rail}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.Volts
${volts}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${volts} > 0
END
Verify VDN Temperature Sensors Attributes
[Documentation] Check vdn temperature attributes.
[Tags] Verify_VDN_Temperature_Sensors_Attributes
# Example of one of the entries returned by 'Get Endpoint Paths':
# /xyz/openbmc_project/sensors/temperature/p0_vdn_temp
${temp_vdn}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vdn_temp
# Example:
# Access the properties of the rail voltage and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/temperature/p0_vdn_temp
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 3000
# }
FOR ${entry} IN @{temp_vdn}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
${vdn_temp}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${vdn_temp} > 0
END
Verify VCS Temperature Sensors Attributes
[Documentation] Check vcs temperature attributes.
[Tags] Verify_VCS_Temperature_Sensors_Attributes
# Example of one of the entries returned by 'Get Endpoint Paths':
# /xyz/openbmc_project/sensors/temperature/p0_vcs_temp
${temp_vcs}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vcs_temp
# Example:
# Access the properties of the rail voltage and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/temperature/p0_vcs_temp
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 31000
# },
FOR ${entry} IN @{temp_vcs}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
${vcs_temp}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${vcs_temp} > 0
END
Verify VDD Temperature Sensors Attributes
[Documentation] Check vdd temperature attributes.
[Tags] Verify_VDD_Temperature_Sensors_Attributes
# Example of one of the entries returned by 'Get Endpoint Paths':
# /xyz/openbmc_project/sensors/temperature/p0_vdd_temp
${temp_vdd}= Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vdd_temp
# Example:
# Access the properties of the rail voltage and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/temperature/p0_vdd_temp
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 4000
# }
FOR ${entry} IN @{temp_vdd}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
${vdd_temp}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${vdd_temp} > 0
END
Verify VDDR Temperature Sensors Attributes
[Documentation] Check vddr temperature attributes.
[Tags] Verify_VDDR_Temperature_Sensors_Attributes
# Example of one of the entries returned by 'Get Endpoint Paths':
# /xyz/openbmc_project/sensors/temperature/p0_vddr_temp
${temp_vddr}=
... Get Endpoint Paths /xyz/openbmc_project/sensors/ *_vddr_temp
# Example:
# Access the properties of the rail voltage and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/temperature/p0_vddr_temp
# {
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 4000
# }
FOR ${entry} IN @{temp_vddr}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Should Be True ${json["data"]["Scale"]} == -3
Should Be Equal As Strings ${json["data"]["Unit"]} xyz.openbmc_project.Sensor.Value.Unit.DegreesC
${vddr_temp}= Evaluate ${json["data"]["Value"]} / 1000
Should Be True ${vddr_temp} > 0
END
Verify Power Sensors Attributes
[Documentation] Check power sensor attributes.
[Tags] Verify_Power_Sensor_Attributes
# Example:
# /xyz/openbmc_project/sensors/power/power_1
# /xyz/openbmc_project/sensors/power/power_2
# /xyz/openbmc_project/sensors/power/power0
# /xyz/openbmc_project/sensors/power/POWER1
# /xyz/openbmc_project/sensors/power/POWER_1
${power}= Get Endpoint Paths /xyz/openbmc_project/sensors/ power*
# Access the properties of the power sensors and it should contain
# the following entries:
# /xyz/openbmc_project/sensors/power/power_1
# {
# "MaxValue": 255.0,
# "MinValue": 0.0,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts",
# "Value": 0.0
# }
FOR ${entry} IN @{power}
${resp}= OpenBMC Get Request ${entry}
${json}= To JSON ${resp.content}
Run Keyword And Ignore Error Should Be True ${json["data"]["Target"]} >= 0
Should Be True ${json["data"]["Value"]} >= 0
END
Verify Power Redundancy Using REST
[Documentation] Verify power redundancy is enabled.
[Tags] Verify_Power_Redundancy_Using_REST
# Example:
# /xyz/openbmc_project/sensors/chassis/PowerSupplyRedundancy
# {
# "error": 0,
# "units": "",
# "value": "Enabled"
# }
# Power Redundancy is a read-only attribute. It cannot be set.
# Pass if sensor is in /xyz and it's enabled.
${redundancy_setting}= Read Attribute
... ${OPENBMC_BASE_URI}control/power_supply_redundancy
... PowerSupplyRedundancyEnabled
Should Be Equal As Integers ${redundancy_setting} ${1}
... msg=PowerSupplyRedundancyEnabled not set as expected.
Verify Power Redundancy Using IPMI
[Documentation] Verify IPMI reports Power Redundancy is enabled.
[Tags] Verify_Power_Redundancy_Using_IPMI
# Refer to data/ipmi_raw_cmd_table.py for command definition.
# Power Redundancy is a read-only attribute. It cannot be set.
${output}= Run IPMI Standard Command
... raw ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][0]}
${scanning}= Set Variable
... ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][5]}
${no_scanning}= Set Variable
... ${IPMI_RAW_CMD['power_supply_redundancy']['Get'][3]}
${enabled_scanning}= Evaluate $scanning in $output
${enabled_no_scanning}= Evaluate $no_scanning in $output
# Either enabled_scanning or enabled_noscanning should be True.
Should Be True ${enabled_scanning} or ${enabled_no_scanning}
... msg=Failed IPMI power redundancy check, result=${output}.
*** Keywords ***
Suite Setup Execution
[Documentation] Do the initial test suite setup.
# - Power off.
# - Boot Host.
REST Power Off stack_mode=skip
REST Power On
Test Teardown Execution
[Documentation] Do the post test teardown.
# - Capture FFDC on test failure.
# - Delete error logs.
# - Close all open SSH connections.
FFDC On Test Case Fail
Delete All Error Logs
Close All Connections