| *** Settings *** |
| Resource ../lib/utils.robot |
| Resource ../lib/connection_client.robot |
| Resource ../lib/boot_utils.robot |
| Library ../lib/gen_misc.py |
| Library ../lib/utils.py |
| Library ../lib/bmc_network_utils.py |
| |
| *** Variables *** |
| # MAC input from user. |
| ${MAC_ADDRESS} ${EMPTY} |
| |
| |
| *** Keywords *** |
| |
| Check And Reset MAC |
| [Documentation] Update BMC with user input MAC address. |
| [Arguments] ${mac_address}=${MAC_ADDRESS} |
| |
| # Description of argument(s): |
| # mac_address The mac address (e.g. 00:01:6c:80:02:28). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Should Not Be Empty ${mac_address} |
| Open Connection And Log In |
| ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command |
| ... cat /sys/class/net/${ethernet_interface}/address |
| IF '${mac_address.lower()}' != '${bmc_mac_addr.lower()}' |
| Set MAC Address |
| END |
| |
| |
| Set MAC Address |
| [Documentation] Update eth0 with input MAC address. |
| [Arguments] ${mac_address}=${MAC_ADDRESS} |
| |
| # Description of argument(s): |
| # mac_address The mac address (e.g. 00:01:6c:80:02:28). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Write fw_setenv ethaddr ${mac_address} |
| OBMC Reboot (off) |
| |
| # Take SSH session post BMC reboot. |
| Open Connection And Log In |
| ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command |
| ... cat /sys/class/net/${ethernet_interface}/address |
| Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True |
| |
| |
| Get BMC IP Info |
| [Documentation] Get system IP address and prefix length. |
| |
| |
| # Get system IP address and prefix length details using "ip addr" |
| # Sample Output of "ip addr": |
| # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000 |
| # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff |
| # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0 |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command |
| ... /sbin/ip addr | grep ${ethernet_interface} |
| |
| # Get line having IP address details. |
| ${lines}= Get Lines Containing String ${cmd_output} inet |
| |
| # List IP address details. |
| @{ip_components}= Split To Lines ${lines} |
| |
| @{ip_data}= Create List |
| |
| # Get all IP addresses and prefix lengths on system. |
| FOR ${ip_component} IN @{ip_components} |
| @{if_info}= Split String ${ip_component} |
| ${ip_n_prefix}= Get From List ${if_info} 1 |
| Append To List ${ip_data} ${ip_n_prefix} |
| END |
| |
| RETURN ${ip_data} |
| |
| Get BMC Route Info |
| [Documentation] Get system route info. |
| |
| # Sample output of "ip route": |
| # default via xx.xx.xx.x dev eth0 |
| # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx |
| # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command |
| ... /sbin/ip route |
| |
| RETURN ${cmd_output} |
| |
| Get BMC MAC Address |
| [Documentation] Get system MAC address. |
| |
| # Sample output of "ip addr | grep ether": |
| # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command |
| ... /sbin/ip addr | grep ${ethernet_interface} -A 1 | grep ether |
| |
| # Split the line and return MAC address. |
| # Split list data: |
| # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff |
| |
| @{words}= Split String ${cmd_output} |
| |
| RETURN ${words[1]} |
| |
| |
| Get BMC MAC Address List |
| [Documentation] Get system MAC address |
| |
| # Sample output of "ip addr | grep ether": |
| # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command |
| ... /sbin/ip addr | grep ether |
| |
| # Split the line and return MAC address. |
| # Split list data: |
| # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff |
| # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff |
| |
| ${mac_list}= Create List |
| @{lines}= Split To Lines ${cmd_output} |
| FOR ${line} IN @{lines} |
| @{words}= Split String ${line} |
| Append To List ${mac_list} ${words[1]} |
| END |
| |
| RETURN ${mac_list} |
| |
| Get BMC Hostname |
| [Documentation] Get BMC hostname. |
| |
| # Sample output of "hostname": |
| # test_hostname |
| |
| ${output} ${stderr} ${rc}= BMC Execute Command hostname |
| |
| RETURN ${output} |
| |
| Get FW_Env MAC Address |
| [Documentation] Get FW_Env MAC address. |
| |
| # Sample output of "fw_printenv | grep ethaddr" |
| # ethaddr=xx:xx:xx:xx:xx:xx:xx |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${ethernet_interface}= Set Variable If |
| ... "${ethernet_interface}"=="eth0" ethaddr eth1addr |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command /sbin/fw_printenv | grep ${ethernet_interface} |
| |
| # Split the line and return MAC address. |
| # Split list data: |
| # ethaddr | xx:xx:xx:xx:xx:xx:xx |
| |
| @{words}= Split String ${cmd_output} = |
| |
| RETURN ${words[1]} |
| |
| |
| Get List Of IP Address Via REST |
| [Documentation] Get list of IP address via REST. |
| [Arguments] @{ip_uri_list} |
| |
| # Description of argument(s): |
| # ip_uri_list List of IP objects. |
| # Example: |
| # "data": [ |
| # "/xyz/openbmc_project/network/eth0/ipv4/e9767624", |
| # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b" |
| # ], |
| |
| ${ip_list}= Create List |
| |
| FOR ${ip_uri} IN @{ip_uri_list} |
| ${ip_addr}= Read Attribute ${ip_uri} Address |
| Append To List ${ip_list} ${ip_addr} |
| END |
| |
| RETURN @{ip_list} |
| |
| Delete IP And Object |
| [Documentation] Delete IP and object. |
| [Arguments] ${ip_addr} @{ip_uri_list} |
| |
| # Description of argument(s): |
| # ip_addr IP address to be deleted. |
| # ip_uri_list List of IP object URIs. |
| |
| # Find IP object having this IP address. |
| |
| FOR ${ip_uri} IN @{ip_uri_list} |
| ${ip_addr1}= Read Attribute ${ip_uri} Address |
| IF '${ip_addr}' == '${ip_addr1}' |
| Exit For Loop |
| END |
| END |
| |
| # If the given IP address is not configured, return. |
| # Otherwise, delete the IP and object. |
| |
| Run Keyword And Return If '${ip_addr}' != '${ip_addr1}' |
| ... Pass Execution IP address to be deleted is not configured. |
| |
| Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri} |
| |
| # After any modification on network interface, BMC restarts network |
| # module, wait until it is reachable. Then wait 15 seconds for new |
| # configuration to be updated on BMC. |
| |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| ... ${NETWORK_RETRY_TIME} |
| Sleep 15s |
| |
| # Verify whether deleted IP address is removed from BMC system. |
| |
| ${ip_data}= Get BMC IP Info |
| Should Not Contain Match ${ip_data} ${ip_addr}* |
| ... msg=IP address not deleted. |
| |
| Get First Non Pingable IP From Subnet |
| [Documentation] Find first non-pingable IP from the subnet and return it. |
| [Arguments] ${host}=${OPENBMC_HOST} |
| |
| # Description of argument(s): |
| # host Any valid host name or IP address |
| # (e.g. "machine1" or "9.xx.xx.31"). |
| |
| # Non-pingable IP is unused IP address in the subnet. |
| ${host_name} ${ip_addr}= Get Host Name IP ${host} |
| |
| # Split IP address into network part and host part. |
| # IP address will have 4 octets xx.xx.xx.xx. |
| # Sample output after split: |
| # split_ip [xx.xx.xx, xx] |
| |
| ${split_ip}= Split String From Right ${ip_addr} . 1 |
| # First element in list is Network part. |
| ${network_part}= Get From List ${split_ip} 0 |
| |
| FOR ${octet4} IN RANGE 1 255 |
| ${new_ip}= Catenate ${network_part}.${octet4} |
| ${status}= Run Keyword And Return Status Ping Host ${new_ip} |
| # If IP is non-pingable, return it. |
| Return From Keyword If '${status}' == 'False' ${new_ip} |
| END |
| |
| Fail msg=No non-pingable IP could be found in subnet ${network_part}. |
| |
| |
| Validate MAC On BMC |
| [Documentation] Validate MAC on BMC. |
| [Arguments] ${mac_addr} |
| |
| # Description of argument(s): |
| # mac_addr MAC address of the BMC. |
| |
| ${system_mac}= Get BMC MAC Address |
| ${mac_new_addr}= Truncate MAC Address ${system_mac} ${mac_addr} |
| |
| ${status}= Compare MAC Address ${system_mac} ${mac_new_addr} |
| Should Be True ${status} |
| ... msg=MAC address ${system_mac} does not match ${mac_new_addr}. |
| |
| Validate MAC On FW_Env |
| [Documentation] Validate MAC on FW_Env. |
| [Arguments] ${mac_addr} |
| |
| # Description of argument(s): |
| # mac_addr MAC address of the BMC. |
| |
| ${fw_env_addr}= Get FW_Env MAC Address |
| ${mac_new_addr}= Truncate MAC Address ${fw_env_addr} ${mac_addr} |
| |
| ${status}= Compare MAC Address ${fw_env_addr} ${mac_new_addr} |
| Should Be True ${status} |
| ... msg=MAC address ${fw_env_addr} does not match ${mac_new_addr}. |
| |
| Truncate MAC Address |
| [Documentation] Truncates and returns user provided MAC address. |
| [Arguments] ${sys_mac_addr} ${user_mac_addr} |
| |
| # Description of argument(s): |
| # sys_mac_addr MAC address of the BMC. |
| # user_mac_addr user provided MAC address. |
| |
| ${mac_byte}= Set Variable ${0} |
| @{user_mac_list}= Split String ${user_mac_addr} : |
| @{sys_mac_list}= Split String ${sys_mac_addr} : |
| ${user_new_mac_list} Create List |
| |
| # Truncate extra bytes and bits from MAC address |
| FOR ${mac_item} IN @{sys_mac_list} |
| ${invalid_mac_byte} = Get Regexp Matches ${user_mac_list}[${mac_byte}] [^A-Za-z0-9]+ |
| Return From Keyword If ${invalid_mac_byte} ${user_mac_addr} |
| ${mac_int} = Convert To Integer ${user_mac_list}[${mac_byte}] 16 |
| ${user_mac_len} = Get Length ${user_mac_list} |
| IF ${mac_int} >= ${256} |
| ${user_mac_byte}= Truncate MAC Bits ${user_mac_list}[${mac_byte}] |
| ELSE |
| ${user_mac_byte}= Set Variable ${user_mac_list}[${mac_byte}] |
| END |
| Append To List ${user_new_mac_list} ${user_mac_byte} |
| ${mac_byte} = Set Variable ${mac_byte + 1} |
| Exit For Loop If '${mac_byte}' == '${user_mac_len}' |
| |
| END |
| ${user_new_mac_string}= Evaluate ":".join(${user_new_mac_list}) |
| RETURN ${user_new_mac_string} |
| |
| Truncate MAC Bits |
| [Documentation] Truncates user provided MAC address byte to bits. |
| [Arguments] ${user_mac_addr_byte} |
| |
| # Description of argument(s): |
| # user_mac_addr_byte user provided MAC address byte to truncate bits |
| |
| ${user_mac_addr_int}= Convert To List ${user_mac_addr_byte} |
| ${user_mac_addr_byte}= Get Slice From List ${user_mac_addr_int} 0 2 |
| ${user_mac_addr_byte_string}= Evaluate "".join(${user_mac_addr_byte}) |
| RETURN ${user_mac_addr_byte_string} |
| |
| |
| Run Build Net |
| [Documentation] Run build_net to preconfigure the ethernet interfaces. |
| |
| OS Execute Command build_net help y y |
| # Run pingum to check if the "build_net" was run correctly done. |
| ${output} ${stderr} ${rc}= OS Execute Command pingum |
| Should Contain ${output} All networks ping Ok |
| |
| |
| Configure Hostname |
| [Documentation] Configure hostname on BMC via Redfish. |
| [Arguments] ${hostname} ${status_code}=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # hostname A hostname value which is to be configured on BMC. |
| # status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${data}= Create Dictionary HostName=${hostname} |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=${status_code} |
| |
| |
| Verify IP On BMC |
| [Documentation] Verify IP on BMC. |
| [Arguments] ${ip} |
| |
| # Description of argument(s): |
| # ip IP address to be verified (e.g. "10.7.7.7"). |
| |
| # Get IP address details on BMC using IP command. |
| @{ip_data}= Get BMC IP Info |
| Should Contain Match ${ip_data} ${ip}/* |
| ... msg=IP address does not exist. |
| |
| |
| Verify Gateway On BMC |
| [Documentation] Verify gateway on BMC. |
| [Arguments] ${gateway_ip}=0.0.0.0 |
| |
| # Description of argument(s): |
| # gateway_ip Gateway IP address. |
| |
| ${route_info}= Get BMC Route Info |
| |
| # If gateway IP is empty or 0.0.0.0 it will not have route entry. |
| |
| IF '${gateway_ip}' == '0.0.0.0' |
| Pass Execution Gateway IP is "0.0.0.0". |
| ELSE |
| Should Contain ${route_info} ${gateway_ip} msg=Gateway IP address not matching. |
| END |
| |
| |
| Get BMC DNS Info |
| [Documentation] Get system DNS info. |
| |
| |
| # Sample output of "resolv.conf": |
| # ### Generated manually via dbus settings ### |
| # nameserver 8.8.8.8 |
| |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command |
| ... cat /etc/resolv.conf |
| |
| RETURN ${cmd_output} |
| |
| |
| CLI Get Nameservers |
| [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list. |
| |
| # Example of /etc/resolv.conf data: |
| # nameserver x.x.x.x |
| # nameserver y.y.y.y |
| |
| ${stdout} ${stderr} ${rc}= BMC Execute Command |
| ... egrep nameserver /etc/resolv.conf | cut -f2- -d ' ' |
| ${nameservers}= Split String ${stdout} |
| |
| RETURN ${nameservers} |
| |
| CLI Get and Verify Name Servers |
| [Documentation] Get and Verify the nameserver IPs from /etc/resolv.conf |
| ... and compare with redfish nameserver. |
| [Arguments] ${static_name_servers} |
| ... ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of Argument(s): |
| # static_name_servers Address for static name server |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${cli_nameservers}= CLI Get Nameservers |
| ${cmd_status}= Run Keyword And Return Status |
| ... List Should Contain Sub List ${cli_nameservers} ${static_name_servers} |
| |
| IF '${valid_status_codes}' == '${HTTP_OK}' |
| Should Be True ${cmd_status} |
| ELSE |
| Should Not Be True ${cmd_status} |
| END |
| |
| Get Network Configuration |
| [Documentation] Get network configuration. |
| # Sample output: |
| #{ |
| # "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface", |
| # "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0", |
| # "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface", |
| # "Description": "Management Network Interface", |
| # "IPv4Addresses": [ |
| # { |
| # "Address": "169.254.xx.xx", |
| # "AddressOrigin": "IPv4LinkLocal", |
| # "Gateway": "0.0.0.0", |
| # "SubnetMask": "255.255.0.0" |
| # }, |
| # { |
| # "Address": "xx.xx.xx.xx", |
| # "AddressOrigin": "Static", |
| # "Gateway": "xx.xx.xx.1", |
| # "SubnetMask": "xx.xx.xx.xx" |
| # } |
| # ], |
| # "Id": "eth0", |
| # "MACAddress": "xx:xx:xx:xx:xx:xx", |
| # "Name": "Manager Ethernet Interface", |
| # "SpeedMbps": 0, |
| # "VLAN": { |
| # "VLANEnable": false, |
| # "VLANId": 0 |
| # } |
| [Arguments] ${network_active_channel}=${CHANNEL_NUMBER} |
| |
| # Description of argument(s): |
| # network_active_channel Ethernet channel number (eg. 1 or 2) |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${resp}= Redfish.Get |
| ... ${REDFISH_NW_ETH_IFACE}${active_channel_config['${network_active_channel}']['name']} |
| |
| @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses |
| RETURN @{network_configurations} |
| |
| |
| Add IP Address |
| [Documentation] Add IP Address To BMC. |
| [Arguments] ${ip} ${subnet_mask} ${gateway} |
| ... ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # ip IP address to be added (e.g. "10.7.7.7"). |
| # subnet_mask Subnet mask for the IP to be added |
| # (e.g. "255.255.0.0"). |
| # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${empty_dict}= Create Dictionary |
| ${ip_data}= Create Dictionary Address=${ip} |
| ... SubnetMask=${subnet_mask} Gateway=${gateway} |
| |
| ${patch_list}= Create List |
| ${network_configurations}= Get Network Configuration |
| ${num_entries}= Get Length ${network_configurations} |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| ${valid_status_codes}= Set Variable If '${valid_status_codes}' == '${HTTP_OK}' |
| ... ${HTTP_OK},${HTTP_NO_CONTENT} ${valid_status_codes} |
| |
| # We need not check for existence of IP on BMC while adding. |
| Append To List ${patch_list} ${ip_data} |
| ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=[${valid_status_codes}] |
| |
| Return From Keyword If '${valid_status_codes}' != '${HTTP_OK},${HTTP_NO_CONTENT}' |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Verify IP On BMC ${ip} |
| Validate Network Config On BMC |
| |
| |
| Delete IP Address |
| [Documentation] Delete IP Address Of BMC. |
| [Arguments] ${ip} ${valid_status_codes}=[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # ip IP address to be deleted (e.g. "10.7.7.7"). |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| |
| @{network_configurations}= Get Network Configuration |
| FOR ${network_configuration} IN @{network_configurations} |
| Run Keyword If '${network_configuration['Address']}' == '${ip}' |
| ... Append To List ${patch_list} ${null} |
| ... ELSE Append To List ${patch_list} ${empty_dict} |
| END |
| |
| ${ip_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${patch_list} ${null} msg=${ip} does not exist on BMC |
| Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC |
| |
| # Run patch command only if given IP is found on BMC |
| ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{data} |
| ... valid_status_codes=${valid_status_codes} |
| |
| # Note: Network restart takes around 15-18s after patch request processing |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| ${delete_status}= Run Keyword And Return Status Verify IP On BMC ${ip} |
| IF '${valid_status_codes}' == '[${HTTP_OK},${HTTP_ACCEPTED},${HTTP_NO_CONTENT}]' |
| Should Be True '${delete_status}' == '${False}' |
| ELSE |
| Should Be True '${delete_status}' == '${True}' |
| END |
| |
| Validate Network Config On BMC |
| |
| |
| Validate Network Config On BMC |
| [Documentation] Check that network info obtained via redfish matches info |
| ... obtained via CLI. |
| |
| @{network_configurations}= Get Network Configuration |
| ${ip_data}= Get BMC IP Info |
| FOR ${network_configuration} IN @{network_configurations} |
| Should Contain Match ${ip_data} ${network_configuration['Address']}/* |
| ... msg=IP address does not exist. |
| END |
| |
| |
| Create VLAN |
| [Documentation] Create a VLAN. |
| [Arguments] ${id} ${interface}=eth0 ${expected_result}=valid |
| |
| # Description of argument(s): |
| # id The VLAN ID (e.g. '53'). |
| # interface The physical interface for the VLAN(e.g. 'eth0'). |
| # expected_result Expected status of VLAN configuration. |
| |
| @{data_vlan_id}= Create List ${interface} ${id} |
| ${data}= Create Dictionary data=@{data_vlan_id} |
| ${resp}= OpenBMC Post Request ${vlan_resource} data=${data} |
| ${resp.status_code}= Convert To String ${resp.status_code} |
| ${status}= Run Keyword And Return Status |
| ... Valid Value resp.status_code ["${HTTP_OK}"] |
| |
| IF '${expected_result}' == 'error' |
| Should Be Equal ${status} ${False} msg=Configuration of an invalid VLAN ID Failed. |
| ELSE |
| Should Be Equal ${status} ${True} msg=Configuration of a valid VLAN ID Failed. |
| END |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| |
| Configure Network Settings On VLAN |
| [Documentation] Configure network settings. |
| [Arguments] ${id} ${ip_addr} ${prefix_len} ${gateway_ip}=${gateway} |
| ... ${expected_result}=valid ${interface}=eth0 |
| |
| # Description of argument(s): |
| # id The VLAN ID (e.g. '53'). |
| # ip_addr IP address of VLAN Interface. |
| # prefix_len Prefix length of VLAN Interface. |
| # gateway_ip Gateway IP address of VLAN Interface. |
| # expected_result Expected status of network setting configuration. |
| # interface Physical Interface on which the VLAN is defined. |
| |
| @{ip_parm_list}= Create List ${network_resource} |
| ... ${ip_addr} ${prefix_len} ${gateway_ip} |
| |
| ${data}= Create Dictionary data=@{ip_parm_list} |
| |
| Run Keyword And Ignore Error OpenBMC Post Request |
| ... ${NETWORK_MANAGER}${interface}_${id}/action/IP data=${data} |
| |
| # After any modification on network interface, BMC restarts network |
| # module, wait until it is reachable. Then wait 15 seconds for new |
| # configuration to be updated on BMC. |
| |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| ... ${NETWORK_RETRY_TIME} |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| # Verify whether new IP address is populated on BMC system. |
| # It should not allow to configure invalid settings. |
| ${status}= Run Keyword And Return Status |
| ... Verify IP On BMC ${ip_addr} |
| |
| IF '${expected_result}' == 'error' |
| Should Be Equal ${status} ${False} msg=Configuration of invalid IP Failed. |
| ELSE |
| Should Be Equal ${status} ${True} msg=Configuration of valid IP Failed. |
| END |
| |
| |
| Get BMC Default Gateway |
| [Documentation] Get system default gateway. |
| |
| ${route_info}= Get BMC Route Info |
| |
| ${lines}= Get Lines Containing String ${route_info} default via |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| # Extract the corresponding default gateway for eth0 and eth1 |
| ${default_gw_line}= Get Lines Containing String ${lines} ${ethernet_interface} |
| ${default_gw}= Split String ${default_gw_line} |
| |
| # Example of the output |
| # default_gw: |
| # [0]: default |
| # [1]: via |
| # [2]: xx.xx.xx.1 |
| # [3]: dev |
| # [4]: eth1 |
| |
| RETURN ${default_gw[2]} |
| |
| |
| Validate Hostname On BMC |
| [Documentation] Verify that the hostname read via Redfish is the same as the |
| ... hostname configured on system. |
| [Arguments] ${hostname} |
| |
| # Description of argument(s): |
| # hostname A hostname value which is to be compared to the hostname |
| # configured on system. |
| |
| ${sys_hostname}= Get BMC Hostname |
| Should Be Equal ${sys_hostname} ${hostname} |
| ... ignore_case=True msg=Hostname does not exist. |
| |
| Get Channel Number For All Interface |
| [Documentation] Gets the Interface name and returns the channel number for the given interface. |
| |
| ${valid_channel_number_interface_names}= Get Channel Config |
| |
| ${valid_channel_number_interface_names}= Convert To Dictionary ${valid_channel_number_interface_names} |
| |
| RETURN ${valid_channel_number_interface_names} |
| |
| Get Valid Channel Number |
| [Documentation] Get Valid Channel Number. |
| [Arguments] ${valid_channel_number_interface_names} |
| |
| # Description of argument(s): |
| # valid_channel_number_interface_names Contains channel names in dict. |
| |
| &{valid_channel_number_interface_name}= Create Dictionary |
| |
| FOR ${key} ${values} IN &{valid_channel_number_interface_names} |
| IF '${values['is_valid']}' == 'True' |
| Set To Dictionary ${valid_channel_number_interface_name} ${key} ${values} |
| END |
| END |
| |
| RETURN ${valid_channel_number_interface_name} |
| |
| Get Invalid Channel Number List |
| [Documentation] Get Invalid Channel and return as list. |
| |
| ${available_channels}= Get Channel Number For All Interface |
| # Get the channel which medium_type as 'reserved' and append it to a list. |
| @{invalid_channel_number_list}= Create List |
| |
| FOR ${channel_number} ${values} IN &{available_channels} |
| IF '${values['channel_info']['medium_type']}' == 'reserved' |
| Append To List ${invalid_channel_number_list} ${channel_number} |
| END |
| END |
| |
| RETURN ${invalid_channel_number_list} |
| |
| |
| Get Channel Number For Valid Ethernet Interface |
| [Documentation] Get channel number for all ethernet interface. |
| [Arguments] ${valid_channel_number_interface_name} |
| |
| # Description of argument(s): |
| # channel_number_list Contains channel names in list. |
| |
| @{channel_number_list}= Create List |
| |
| FOR ${channel_number} ${values} IN &{valid_channel_number_interface_name} |
| ${usb_interface_status}= Run Keyword And Return Status Should Not Contain ${values['name']} usb |
| Continue For Loop IF ${usb_interface_status} == False |
| IF '${values['channel_info']['medium_type']}' == 'lan-802.3' |
| Append To List ${channel_number_list} ${channel_number} |
| END |
| END |
| |
| RETURN ${channel_number_list} |
| |
| |
| Get Current Channel Name List |
| [Documentation] Get Current Channel name and append it to active channel list. |
| [Arguments] ${channel_list} ${channel_config_json} |
| |
| # Description of Arguments |
| # ${channel_list} - list Contains all available active channels. |
| # ${channel_config_json} - output of /usr/share/ipmi-providers/channel_config.json file. |
| |
| FOR ${channel_number} ${values} IN &{channel_config_json} |
| IF '${values['name']}' == 'SELF' |
| Append To List ${channel_list} ${channel_number} |
| END |
| END |
| |
| RETURN ${channel_list} |
| |
| |
| Get Active Ethernet Channel List |
| [Documentation] Get Available channels from channel_config.json file and return as list. |
| [Arguments] ${current_channel}=${0} |
| |
| # Description of Arguments |
| # ${current_channel} Current channel number. |
| |
| ${valid_channel_number_interface_names}= Get Channel Number For All Interface |
| |
| ${valid_channel_number_interface_name}= Get Valid Channel Number ${valid_channel_number_interface_names} |
| |
| ${channel_number_list}= Get Channel Number For Valid Ethernet Interface |
| ... ${valid_channel_number_interface_name} |
| |
| Return From Keyword If ${current_channel} == 0 ${channel_number_list} |
| ${channel_number_list}= Get Current Channel Name List |
| ... ${channel_number_list} ${valid_channel_number_interface_names} |
| |
| RETURN ${channel_number_list} |
| |
| Update IP Address |
| [Documentation] Update and verify IP address of BMC. |
| [Arguments] ${ip} ${new_ip} ${netmask} ${gw_ip} |
| ... ${valid_status_codes}=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| # Description of argument(s): |
| # ip IP address to be replaced (e.g. "10.7.7.7"). |
| # new_ip New IP address to be configured. |
| # netmask Netmask value. |
| # gw_ip Gateway IP address. |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| ${ip_data}= Create Dictionary |
| ... Address=${new_ip} SubnetMask=${netmask} Gateway=${gw_ip} |
| |
| # Find the position of IP address to be modified. |
| @{network_configurations}= Get Network Configuration |
| FOR ${network_configuration} IN @{network_configurations} |
| IF '${network_configuration['Address']}' == '${ip}' |
| Append To List ${patch_list} ${ip_data} |
| ELSE |
| Append To List ${patch_list} ${empty_dict} |
| END |
| END |
| |
| # Modify the IP address only if given IP is found |
| ${ip_found}= Run Keyword And Return Status List Should Contain Value |
| ... ${patch_list} ${ip_data} msg=${ip} does not exist on BMC |
| Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC |
| |
| ${data}= Create Dictionary IPv4StaticAddresses=${patch_list} |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=&{data} valid_status_codes=${valid_status_codes} |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| |
| Verify IP On BMC ${new_ip} |
| Validate Network Config On BMC |
| |
| Get IPv4 DHCP Enabled Status |
| [Documentation] Return IPv4 DHCP enabled status from redfish URI. |
| [Arguments] ${channel_number}=${1} |
| |
| # Description of argument(s): |
| # channel_number Ethernet channel number, 1 is for eth0 and 2 is for eth1 (e.g. "1"). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${resp}= Redfish.Get Attribute ${REDFISH_NW_ETH_IFACE}${ethernet_interface} DHCPv4 |
| Return From Keyword ${resp['DHCPEnabled']} |
| |
| Get DHCP IP Info |
| [Documentation] Return DHCP IP address, gateway and subnetmask from redfish URI. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${resp_list}= Redfish.Get Attribute ${REDFISH_NW_ETH_IFACE}${ethernet_interface} IPv4Addresses |
| FOR ${resp} IN @{resp_list} |
| Continue For Loop If '${resp['AddressOrigin']}' != 'DHCP' |
| ${ip_addr}= Set Variable ${resp['Address']} |
| ${gateway}= Set Variable ${resp['Gateway']} |
| ${subnetmask}= Set Variable ${resp['SubnetMask']} |
| Return From Keyword ${ip_addr} ${gateway} ${subnetmask} |
| END |
| |
| |
| DNS Test Setup Execution |
| [Documentation] Do DNS test setup execution. |
| |
| Redfish.Login |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${original_nameservers}= Redfish.Get Attribute |
| ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers |
| |
| Rprint Vars original_nameservers |
| # Set suite variables to trigger restoration during teardown. |
| Set Suite Variable ${original_nameservers} |
| |
| |
| Delete Static Name Servers |
| [Documentation] Delete static name servers. |
| |
| DNS Test Setup Execution |
| Configure Static Name Servers static_name_servers=@{EMPTY} |
| |
| # Check if all name servers deleted on BMC. |
| ${nameservers}= CLI Get Nameservers |
| Should Not Contain ${nameservers} ${original_nameservers} |
| |
| DNS Test Setup Execution |
| |
| Should Be Empty ${original_nameservers} |
| |
| |
| Configure Static Name Servers |
| [Documentation] Configure DNS server on BMC. |
| [Arguments] ${static_name_servers}=${original_nameservers} |
| ... ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of the argument(s): |
| # static_name_servers A list of static name server IPs to be |
| # configured on the BMC. |
| # valid_status_codes Expected return code from patch operation |
| # (e.g. "200"). See prolog of rest_request |
| # method in redfish_plus.py for details. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${type} = Evaluate type($static_name_servers).__name__ |
| ${static_name_servers}= Set Variable If '${type}'=='str' |
| ... '${static_name_servers}' ${static_name_servers} |
| |
| # Currently BMC is sending 500 response code instead of 400 for invalid scenarios. |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body={'StaticNameServers': ${static_name_servers}} |
| ... valid_status_codes=[${valid_status_codes}, ${HTTP_INTERNAL_SERVER_ERROR}] |
| |
| # Patch operation takes 1 to 3 seconds to set new value. |
| Sleep 3s |
| |
| # Check if newly added DNS server is configured on BMC. |
| CLI Get and Verify Name Servers ${static_name_servers} ${valid_status_codes} |