| *** Settings *** |
| |
| Documentation Module to test IPMI asset tag functionality. |
| Resource ../lib/ipmi_client.robot |
| Resource ../lib/openbmc_ffdc.robot |
| Resource ../lib/bmc_network_utils.robot |
| Variables ../data/ipmi_raw_cmd_table.py |
| Variables ../data/ipmi_variable.py |
| Library ../lib/bmc_network_utils.py |
| Library ../lib/ipmi_utils.py |
| |
| Suite Setup IPMI General Test Suite Setup |
| Test Teardown FFDC On Test Case Fail |
| |
| *** Test Cases *** |
| |
| Test Get Self Test Results via IPMI Raw Command |
| [Documentation] Get self test results via IPMI raw command and verify the output. |
| [Tags] Test_Get_Self_Test_Results_via_IPMI_Raw_Command |
| |
| ${resp}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Self_Test_Results']['Get'][0]} |
| |
| # 55h = No error. All Self Tests Passed. |
| # 56h = Self Test function not implemented in this controller. |
| Should Contain Any ${resp} 55 00 56 00 |
| |
| |
| Test Get Device GUID Via IPMI Raw Command |
| [Documentation] Get device GUID via IPMI raw command and verify it using Redfish. |
| [Tags] Test_Get_Device_GUID_Via_IPMI_Raw_Command |
| [Teardown] Run Keywords Redfish.Logout AND FFDC On Test Case Fail |
| # Get GUIDS via IPMI. |
| # This should match the /redfish/v1/Managers/bmc's UUID data. |
| ${guids}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Device GUID']['Get'][0]} |
| # Reverse the order and remove space delims. |
| ${guids}= Split String ${guids} |
| Reverse List ${guids} |
| ${guids}= Evaluate "".join(${guids}) |
| |
| Redfish.Login |
| ${uuid}= Redfish.Get Attribute /redfish/v1/Managers/bmc UUID |
| ${uuid}= Remove String ${uuid} - |
| |
| Rprint Vars guids uuid |
| Valid Value uuid ['${guids}'] |
| |
| |
| Verify Get Channel Info via IPMI |
| [Documentation] Verify get channel info via IPMI. |
| [Tags] Verify_Get_Channel_Info_via_IPMI |
| |
| # Get channel info via ipmi command "ipmitool channel info [channel number]". |
| # Verify channel info with files "channel_access_volatile.json", "channel_access_nv.json" |
| # and "channel_config.json" in BMC. |
| |
| # Example output from 'Get Channel Info': |
| # channel_info: |
| # [channel_0x2_info]: |
| # [channel_medium_type]: 802.3 LAN |
| # [channel_protocol_type]: IPMB-1.0 |
| # [session_support]: multi-session |
| # [active_session_count]: 0 |
| # [protocol_vendor_id]: 7154 |
| # [volatile(active)_settings]: |
| # [alerting]: enabled |
| # [per-message_auth]: enabled |
| # [user_level_auth]: enabled |
| # [access_mode]: always available |
| # [Non-Volatile Settings]: |
| # [alerting]: enabled |
| # [per-message_auth]: enabled |
| # [user_level_auth]: enabled |
| # [access_mode]: always available |
| |
| ${channel_info_ipmi}= Get Channel Info ${CHANNEL_NUMBER} |
| ${active_channel_config}= Get Active Channel Config |
| ${channel_volatile_data_config}= Get Channel Access Config /run/ipmi/channel_access_volatile.json |
| ${channel_nv_data_config}= Get Channel Access Config /var/lib/ipmi/channel_access_nv.json |
| |
| Rprint Vars channel_info_ipmi |
| Rprint Vars active_channel_config |
| Rprint Vars channel_volatile_data_config |
| Rprint Vars channel_nv_data_config |
| |
| Valid Value medium_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_medium_type']}'] |
| ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['medium_type']}'] |
| |
| Valid Value protocol_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_protocol_type']}'] |
| ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['protocol_type']}'] |
| |
| Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['session_support'] |
| ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['session_supported']}'] |
| |
| Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['active_session_count'] |
| ... ['${active_channel_config['${CHANNEL_NUMBER}']['active_sessions']}'] |
| # IPMI Spec: The IPMI Enterprise Number is: 7154 (decimal) |
| Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['protocol_vendor_id'] ['7154'] |
| |
| # Verify volatile(active)_settings |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['alerting']}'] |
| ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}'] |
| |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['per-message_auth']}'] |
| ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}'] |
| |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['user_level_auth']}'] |
| ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}'] |
| |
| Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['access_mode']}'] |
| ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['access_mode']}'] |
| |
| # Verify Non-Volatile Settings |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['alerting']}'] |
| ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}'] |
| |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['per-message_auth']}'] |
| ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}'] |
| |
| Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['user_level_auth']}'] |
| ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}'] |
| |
| Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['access_mode']}'] |
| ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['access_mode']}'] |
| |
| |
| Test Get Channel Authentication Capabilities via IPMI |
| [Documentation] Verify channel authentication capabilities via IPMI. |
| [Tags] Test_Get_Channel_Authentication_Capabilities_via_IPMI |
| [Template] Verify Channel Auth Capabilities |
| |
| FOR ${channel} IN @{active_channel_list} |
| FOR ${privilege} IN 4 3 2 |
| # Input Channel Privilege Level |
| ${channel} ${privilege} |
| END |
| END |
| |
| |
| Test Get Channel Authentication Capabilities IPMI Command For Invalid Channel |
| [Documentation] Verify get channel authentication capabilities for invalid channel. |
| [Tags] Test_Get_Channel_Authentication_Capabilities_IPMI_Command_For_Invalid_Channel |
| [Template] Verify Channel Auth Capabilities For Invalid Channel |
| |
| FOR ${channel} IN @{inactive_channel_list} |
| # Input Channel |
| ${channel} |
| END |
| |
| |
| Verify Get Channel Authentication Capabilities IPMI Raw Command With Invalid Data Length |
| [Documentation] Verify get channel authentication capabilities IPMI raw command with invalid data length. |
| [Tags] Verify_Get_Channel_Authentication_Capabilities_IPMI_Raw_Command_With_Invalid_Data_Length |
| [Template] Verify Channel Auth Command For Invalid Data Length |
| |
| # Bytes |
| low |
| high |
| |
| |
| Verify Set Session Privilege Level via IPMI Raw Command |
| [Documentation] Set session privilege with given privilege level and verify the response with |
| ... expected level. |
| [Tags] Verify_Set_Session_Privilege_Level_via_IPMI_Raw_Command |
| [Template] Set Session Privilege Level And Verify |
| |
| # privilege_level expected_level |
| 0x00 04 |
| 0x02 02 |
| 0x03 03 |
| 0x04 04 |
| |
| |
| Verify Set Invalid Session Privilege Level Via IPMI Raw Command |
| [Documentation] Verify set invalid session privilege level via IPMI raw command. |
| [Tags] Verify_Set_Invalid_Session_Privilege_Level_Via_IPMI_Raw_Command |
| [Template] Set Invalid Session Privilege Level And Verify |
| |
| # invalid_privilege_level |
| 0x05 |
| 0x06 |
| 0x07 |
| 0x0F |
| |
| |
| Verify Close Session Via IPMI |
| [Documentation] Verify close session via IPMI. |
| [Tags] Verify_Close_Session_Via_IPMI |
| |
| # The "close session command" can be tested with any out-of-band IPMI command. |
| # When the session is about to close, it will execute the close session command at the end. |
| |
| ${cmd}= Catenate mc info -vvv 2>&1 | grep "Closed Session" |
| ${cmd_output}= Run External IPMI Standard Command ${cmd} |
| |
| Should Contain ${cmd_output} Closed Session |
| |
| |
| Verify Chassis Identify via IPMI |
| [Documentation] Set chassis identify using IPMI and verify. |
| [Tags] Verify_Chassis_Identify_via_IPMI |
| [Setup] Redfish.Login |
| [Teardown] Redfish.logout |
| |
| # Set to default "chassis identify" and verify that LED blinks for 15s. |
| Run IPMI Standard Command chassis identify |
| Verify Identify LED State Via Redfish Lit |
| |
| Sleep 18s |
| Verify Identify LED State Via Redfish Off |
| |
| # Set "chassis identify" to 10s and verify that the LED blinks for 10s. |
| Run IPMI Standard Command chassis identify 10 |
| Verify Identify LED State Via Redfish Lit |
| |
| Sleep 12s |
| Verify Identify LED State Via Redfish Off |
| |
| |
| Verify Chassis Identify Off And Force Identify On via IPMI |
| [Documentation] Set chassis identify to "off" and "force" using IPMI and verify. |
| [Tags] Verify_Chassis_Identify_Off_And_Force_Identify_On_via_IPMI |
| [Setup] Redfish.Login |
| [Teardown] Redfish.logout |
| |
| # Set the LED to "Force Identify On". |
| Run IPMI Standard Command chassis identify force |
| Verify Identify LED State Via Redfish Lit |
| |
| # Set "chassis identify" to 0 and verify that the LED turns off. |
| Run IPMI Standard Command chassis identify 0 |
| Verify Identify LED State Via Redfish Off |
| |
| |
| *** Keywords *** |
| |
| IPMI General Test Suite Setup |
| [Documentation] Get active and inactive/invalid channels from channel_config.json file |
| ... in list type and set it as suite variable. |
| |
| # Get active channel list and set as suite variable. |
| @{active_channel_list}= Get Active Ethernet Channel List |
| Set Suite Variable @{active_channel_list} |
| |
| # Get Inactive/Invalid channel list and set as suite variable. |
| @{inactive_channel_list}= Get Invalid Channel Number List |
| Set Suite Variable @{inactive_channel_list} |
| |
| |
| Set Session Privilege Level And Verify |
| [Documentation] Set session privilege with given privilege level and verify the response with |
| ... expected level. |
| [Arguments] ${privilege_level} ${expected_level} |
| # Description of argument(s): |
| # privilege_level Requested Privilege Level. |
| # expected_level New Privilege Level (or present level if ‘return present privilege level’ |
| # was selected). |
| |
| ${resp}= Run External IPMI Raw Command |
| ... 0x06 0x3b ${privilege_level} |
| Should Contain ${resp} ${expected_level} |
| |
| |
| Set Invalid Session Privilege Level And Verify |
| [Documentation] Set invalid session privilege level and verify the response. |
| [Arguments] ${privilege_level} |
| # Description of argument(s): |
| # privilege_level Requested Privilege Level. |
| |
| # Verify requested level exceeds Channel and/or User Privilege Limit. |
| ${msg}= Run Keyword And Expect Error * Run External IPMI Raw Command |
| ... 0x06 0x3b ${privilege_level} |
| Should Contain ${msg} Unknown rsp=0x81 |
| |
| |
| Verify Identify LED State Via Redfish |
| [Documentation] Verify that Redfish identify LED system with given state. |
| [Arguments] ${expected_state} |
| # Description of argument(s): |
| # expected_led_status Expected value of Identify LED. |
| |
| # Get the following URI(s) and iterate to find the attribute IndicatorLED. |
| # Example: |
| # /redfish/v1/Systems/system |
| # /redfish/v1/Systems/hypervisor |
| |
| # Python module: get_member_list(resource_path) |
| ${systems}= Redfish_Utils.Get Member List /redfish/v1/Systems |
| FOR ${system} IN @{systems} |
| ${led_value}= Redfish.Get Attribute ${system} IndicatorLED |
| # Get attribute return None if IndicatorLED does not exist in the URI. |
| Continue For Loop If '${led_value}' == 'None' |
| Should Be True '${led_value}' == '${expected_state}' |
| END |
| |
| |
| Verify Channel Auth Capabilities |
| [Documentation] Verify authentication capabilities for given channel and privilege. |
| [Arguments] ${channel} ${privilege_level} |
| |
| # Description of argument(s): |
| # channel Interface channel number. |
| # privilege_level User Privilege level (e.g. 4-Administator, 3-Operator, 2-Readonly). |
| |
| # Python module: get_channel_auth_capabilities(channel_number, privilege_level) |
| ${channel_auth_cap}= Get Channel Auth Capabilities ${channel} ${privilege_level} |
| Rprint Vars channel_auth_cap |
| |
| Valid Value channel_auth_cap['channel_number'] ['${channel}'] |
| Valid Value channel_auth_cap['kg_status'] ['default (all zeroes)'] |
| Valid Value channel_auth_cap['per_message_authentication'] ['enabled'] |
| Valid Value channel_auth_cap['user_level_authentication'] ['enabled'] |
| Valid Value channel_auth_cap['non-null_user_names_exist'] ['yes'] |
| Valid Value channel_auth_cap['null_user_names_exist'] ['no'] |
| Valid Value channel_auth_cap['anonymous_login_enabled'] ['no'] |
| Valid Value channel_auth_cap['channel_supports_ipmi_v1.5'] ['no'] |
| Valid Value channel_auth_cap['channel_supports_ipmi_v2.0'] ['yes'] |
| |
| |
| Verify Channel Auth Capabilities For Invalid Channel |
| [Documentation] Verify authentication capabilities of invalid channels. |
| [Arguments] ${channel} |
| |
| # Description of argument(s): |
| # channel Interface channel number. |
| |
| ${channel_in_hex}= Convert To Hex ${channel} prefix=0x |
| ${cmd}= Catenate ${IPMI_RAW_CMD['Get Channel Auth Cap']['get'][0]} ${channel_in_hex} 0x04 |
| |
| Verify Invalid IPMI Command ${cmd} 0xcc |
| |
| |
| Verify Channel Auth Command For Invalid Data Length |
| [Documentation] Verify channel authentication command for invalid data length. |
| [Arguments] ${byte_length} |
| |
| # Description of argument(s): |
| # byte_length high or low. |
| # e.g. high - add extra byte to request data like "0x06 0x38 0x01 0x04 0x01". |
| # low - reduce bytes in actual request data like "0x06 0x38". |
| |
| ${req_cmd}= Run Keyword If '${byte_length}' == 'low' |
| ... Catenate ${IPMI_RAW_CMD['Get Channel Auth Cap']['get'][0]} ${CHANNEL_NUMBER} |
| ... ELSE |
| ... Catenate ${IPMI_RAW_CMD['Get Channel Auth Cap']['get'][0]} ${CHANNEL_NUMBER} 0x04 0x01 |
| |
| Verify Invalid IPMI Command ${req_cmd} 0xc7 |