| #!/usr/bin/env python |
| |
| r""" |
| This module is the python counterpart to obmc_boot_test. |
| """ |
| |
| import os |
| import imp |
| import time |
| import glob |
| import random |
| import re |
| import cPickle as pickle |
| import socket |
| |
| from robot.utils import DotDict |
| from robot.libraries.BuiltIn import BuiltIn |
| |
| from boot_data import * |
| import gen_print as gp |
| import gen_robot_print as grp |
| import gen_robot_plug_in as grpi |
| import gen_robot_valid as grv |
| import gen_misc as gm |
| import gen_cmd as gc |
| import gen_robot_keyword as grk |
| import state as st |
| import var_stack as vs |
| |
| base_path = os.path.dirname(os.path.dirname( |
| imp.find_module("gen_robot_print")[1])) +\ |
| os.sep |
| sys.path.append(base_path + "extended/") |
| import run_keyword as rk |
| |
| # Setting master_pid correctly influences the behavior of plug-ins like |
| # DB_Logging |
| program_pid = os.getpid() |
| master_pid = os.environ.get('AUTOBOOT_MASTER_PID', program_pid) |
| pgm_name = re.sub('\.py$', '', os.path.basename(__file__)) |
| |
| # Set up boot data structures. |
| boot_table = create_boot_table() |
| valid_boot_types = create_valid_boot_list(boot_table) |
| |
| boot_lists = read_boot_lists() |
| last_ten = [] |
| |
| state = st.return_state_constant('default_state') |
| cp_setup_called = 0 |
| next_boot = "" |
| base_tool_dir_path = os.path.normpath(os.environ.get( |
| 'AUTOBOOT_BASE_TOOL_DIR_PATH', "/tmp")) + os.sep |
| |
| ffdc_dir_path = os.path.normpath(os.environ.get('FFDC_DIR_PATH', '')) + os.sep |
| boot_success = 0 |
| status_dir_path = os.environ.get('STATUS_DIR_PATH', "") |
| if status_dir_path != "": |
| status_dir_path = os.path.normpath(status_dir_path) + os.sep |
| default_power_on = "REST Power On" |
| default_power_off = "REST Power Off" |
| boot_count = 0 |
| |
| LOG_LEVEL = BuiltIn().get_variable_value("${LOG_LEVEL}") |
| ffdc_prefix = "" |
| boot_start_time = "" |
| boot_end_time = "" |
| save_stack = vs.var_stack('save_stack') |
| main_func_parm_list = ['boot_stack', 'stack_mode', 'quiet'] |
| |
| |
| def process_host(host, |
| host_var_name=""): |
| |
| r""" |
| Process a host by getting the associated host name and IP address and |
| setting them in global variables. |
| |
| If the caller does not pass the host_var_name, this function will try to |
| figure out the name of the variable used by the caller for the host parm. |
| Callers are advised to explicitly specify the host_var_name when calling |
| with an exec command. In such cases, the get_arg_name cannot figure out |
| the host variable name. |
| |
| This function will then create similar global variable names by |
| removing "_host" and appending "_host_name" or "_ip" to the host variable |
| name. |
| |
| Example: |
| |
| If a call is made like this: |
| process_host(openbmc_host) |
| |
| Global variables openbmc_host_name and openbmc_ip will be set. |
| |
| Description of argument(s): |
| host A host name or IP. The name of the variable used should |
| have a suffix of "_host". |
| host_var_name The name of the variable being used as the host parm. |
| """ |
| |
| if host_var_name == "": |
| host_var_name = gp.get_arg_name(0, 1, stack_frame_ix=2) |
| |
| host_name_var_name = re.sub("host", "host_name", host_var_name) |
| ip_var_name = re.sub("host", "ip", host_var_name) |
| cmd_buf = "global " + host_name_var_name + ", " + ip_var_name + " ; " +\ |
| host_name_var_name + ", " + ip_var_name + " = gm.get_host_name_ip('" +\ |
| host + "')" |
| exec(cmd_buf) |
| |
| |
| def process_pgm_parms(): |
| |
| r""" |
| Process the program parameters by assigning them all to corresponding |
| globals. Also, set some global values that depend on program parameters. |
| """ |
| |
| # Program parameter processing. |
| # Assign all program parms to python variables which are global to this |
| # module. |
| |
| global parm_list |
| parm_list = BuiltIn().get_variable_value("${parm_list}") |
| # The following subset of parms should be processed as integers. |
| int_list = ['max_num_tests', 'boot_pass', 'boot_fail', 'ffdc_only', |
| 'boot_fail_threshold', 'delete_errlogs', 'quiet', 'test_mode', |
| 'debug'] |
| for parm in parm_list: |
| if parm in int_list: |
| sub_cmd = "int(BuiltIn().get_variable_value(\"${" + parm +\ |
| "}\", \"0\"))" |
| else: |
| sub_cmd = "BuiltIn().get_variable_value(\"${" + parm + "}\")" |
| cmd_buf = "global " + parm + " ; " + parm + " = " + sub_cmd |
| gp.dpissuing(cmd_buf) |
| exec(cmd_buf) |
| if re.match(r".*_host$", parm): |
| cmd_buf = "process_host(" + parm + ", '" + parm + "')" |
| exec(cmd_buf) |
| if re.match(r".*_password$", parm): |
| # Register the value of any parm whose name ends in _password. |
| # This will cause the print functions to replace passwords with |
| # asterisks in the output. |
| cmd_buf = "gp.register_passwords(" + parm + ")" |
| exec(cmd_buf) |
| |
| global ffdc_dir_path_style |
| global boot_list |
| global boot_stack |
| global boot_results_file_path |
| global boot_results |
| global ffdc_list_file_path |
| global ffdc_report_list_path |
| global ffdc_summary_list_path |
| |
| if ffdc_dir_path_style == "": |
| ffdc_dir_path_style = int(os.environ.get('FFDC_DIR_PATH_STYLE', '0')) |
| |
| # Convert these program parms to lists for easier processing.. |
| boot_list = filter(None, boot_list.split(":")) |
| boot_stack = filter(None, boot_stack.split(":")) |
| |
| cleanup_boot_results_file() |
| boot_results_file_path = create_boot_results_file_path(pgm_name, |
| openbmc_nickname, |
| master_pid) |
| |
| if os.path.isfile(boot_results_file_path): |
| # We've been called before in this run so we'll load the saved |
| # boot_results object. |
| boot_results = pickle.load(open(boot_results_file_path, 'rb')) |
| else: |
| boot_results = boot_results(boot_table, boot_pass, boot_fail) |
| |
| ffdc_list_file_path = base_tool_dir_path + openbmc_nickname +\ |
| "/FFDC_FILE_LIST" |
| ffdc_report_list_path = base_tool_dir_path + openbmc_nickname +\ |
| "/FFDC_REPORT_FILE_LIST" |
| |
| ffdc_summary_list_path = base_tool_dir_path + openbmc_nickname +\ |
| "/FFDC_SUMMARY_FILE_LIST" |
| |
| |
| def initial_plug_in_setup(): |
| |
| r""" |
| Initialize all plug-in environment variables which do not change for the |
| duration of the program. |
| |
| """ |
| |
| global LOG_LEVEL |
| BuiltIn().set_log_level("NONE") |
| |
| BuiltIn().set_global_variable("${master_pid}", master_pid) |
| BuiltIn().set_global_variable("${FFDC_DIR_PATH}", ffdc_dir_path) |
| BuiltIn().set_global_variable("${STATUS_DIR_PATH}", status_dir_path) |
| BuiltIn().set_global_variable("${BASE_TOOL_DIR_PATH}", base_tool_dir_path) |
| BuiltIn().set_global_variable("${FFDC_LIST_FILE_PATH}", |
| ffdc_list_file_path) |
| BuiltIn().set_global_variable("${FFDC_REPORT_LIST_PATH}", |
| ffdc_report_list_path) |
| BuiltIn().set_global_variable("${FFDC_SUMMARY_LIST_PATH}", |
| ffdc_summary_list_path) |
| |
| BuiltIn().set_global_variable("${FFDC_DIR_PATH_STYLE}", |
| ffdc_dir_path_style) |
| BuiltIn().set_global_variable("${FFDC_CHECK}", |
| ffdc_check) |
| |
| # For each program parameter, set the corresponding AUTOBOOT_ environment |
| # variable value. Also, set an AUTOBOOT_ environment variable for every |
| # element in additional_values. |
| additional_values = ["program_pid", "master_pid", "ffdc_dir_path", |
| "status_dir_path", "base_tool_dir_path", |
| "ffdc_list_file_path", "ffdc_report_list_path", |
| "ffdc_summary_list_path"] |
| |
| plug_in_vars = parm_list + additional_values |
| |
| for var_name in plug_in_vars: |
| var_value = BuiltIn().get_variable_value("${" + var_name + "}") |
| var_name = var_name.upper() |
| if var_value is None: |
| var_value = "" |
| os.environ["AUTOBOOT_" + var_name] = str(var_value) |
| |
| BuiltIn().set_log_level(LOG_LEVEL) |
| |
| # Make sure the ffdc list directory exists. |
| ffdc_list_dir_path = os.path.dirname(ffdc_list_file_path) + os.sep |
| if not os.path.exists(ffdc_list_dir_path): |
| os.makedirs(ffdc_list_dir_path) |
| |
| |
| def plug_in_setup(): |
| |
| r""" |
| Initialize all changing plug-in environment variables for use by the |
| plug-in programs. |
| """ |
| |
| global LOG_LEVEL |
| global test_really_running |
| |
| BuiltIn().set_log_level("NONE") |
| |
| boot_pass, boot_fail = boot_results.return_total_pass_fail() |
| if boot_pass > 1: |
| test_really_running = 1 |
| else: |
| test_really_running = 0 |
| |
| BuiltIn().set_global_variable("${test_really_running}", |
| test_really_running) |
| BuiltIn().set_global_variable("${boot_type_desc}", next_boot) |
| BuiltIn().set_global_variable("${boot_pass}", boot_pass) |
| BuiltIn().set_global_variable("${boot_fail}", boot_fail) |
| BuiltIn().set_global_variable("${boot_success}", boot_success) |
| BuiltIn().set_global_variable("${ffdc_prefix}", ffdc_prefix) |
| BuiltIn().set_global_variable("${boot_start_time}", boot_start_time) |
| BuiltIn().set_global_variable("${boot_end_time}", boot_end_time) |
| |
| # For each program parameter, set the corresponding AUTOBOOT_ environment |
| # variable value. Also, set an AUTOBOOT_ environment variable for every |
| # element in additional_values. |
| additional_values = ["boot_type_desc", "boot_success", "boot_pass", |
| "boot_fail", "test_really_running", "ffdc_prefix", |
| "boot_start_time", "boot_end_time"] |
| |
| plug_in_vars = additional_values |
| |
| for var_name in plug_in_vars: |
| var_value = BuiltIn().get_variable_value("${" + var_name + "}") |
| var_name = var_name.upper() |
| if var_value is None: |
| var_value = "" |
| os.environ["AUTOBOOT_" + var_name] = str(var_value) |
| |
| if debug: |
| shell_rc, out_buf = \ |
| gc.cmd_fnc_u("printenv | egrep AUTOBOOT_ | sort -u") |
| |
| BuiltIn().set_log_level(LOG_LEVEL) |
| |
| |
| def pre_boot_plug_in_setup(): |
| |
| # Clear the ffdc_list_file_path file. Plug-ins may now write to it. |
| try: |
| os.remove(ffdc_list_file_path) |
| except OSError: |
| pass |
| |
| # Clear the ffdc_report_list_path file. Plug-ins may now write to it. |
| try: |
| os.remove(ffdc_report_list_path) |
| except OSError: |
| pass |
| |
| # Clear the ffdc_summary_list_path file. Plug-ins may now write to it. |
| try: |
| os.remove(ffdc_summary_list_path) |
| except OSError: |
| pass |
| |
| global ffdc_prefix |
| |
| seconds = time.time() |
| loc_time = time.localtime(seconds) |
| time_string = time.strftime("%y%m%d.%H%M%S.", loc_time) |
| |
| ffdc_prefix = openbmc_nickname + "." + time_string |
| |
| |
| def setup(): |
| |
| r""" |
| Do general program setup tasks. |
| """ |
| |
| global cp_setup_called |
| global transitional_boot_selected |
| |
| gp.qprintn() |
| |
| transitional_boot_selected = False |
| |
| robot_pgm_dir_path = os.path.dirname(__file__) + os.sep |
| repo_bin_path = robot_pgm_dir_path.replace("/lib/", "/bin/") |
| # If we can't find process_plug_in_packages.py, ssh_pw or |
| # validate_plug_ins.py, then we don't have our repo bin in PATH. |
| shell_rc, out_buf = gc.cmd_fnc_u("which process_plug_in_packages.py" + |
| " ssh_pw validate_plug_ins.py", quiet=1, |
| print_output=0, show_err=0) |
| if shell_rc != 0: |
| os.environ['PATH'] = repo_bin_path + ":" + os.environ.get('PATH', "") |
| # Likewise, our repo lib subdir needs to be in sys.path and PYTHONPATH. |
| if robot_pgm_dir_path not in sys.path: |
| sys.path.append(robot_pgm_dir_path) |
| PYTHONPATH = os.environ.get("PYTHONPATH", "") |
| if PYTHONPATH == "": |
| os.environ['PYTHONPATH'] = robot_pgm_dir_path |
| else: |
| os.environ['PYTHONPATH'] = robot_pgm_dir_path + ":" + PYTHONPATH |
| |
| validate_parms() |
| |
| grp.rqprint_pgm_header() |
| |
| grk.run_key("Set BMC Power Policy ALWAYS_POWER_OFF") |
| |
| initial_plug_in_setup() |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='setup') |
| if rc != 0: |
| error_message = "Plug-in setup failed.\n" |
| grp.rprint_error_report(error_message) |
| BuiltIn().fail(error_message) |
| # Setting cp_setup_called lets our Teardown know that it needs to call |
| # the cleanup plug-in call point. |
| cp_setup_called = 1 |
| |
| # Keyword "FFDC" will fail if TEST_MESSAGE is not set. |
| BuiltIn().set_global_variable("${TEST_MESSAGE}", "${EMPTY}") |
| # FFDC_LOG_PATH is used by "FFDC" keyword. |
| BuiltIn().set_global_variable("${FFDC_LOG_PATH}", ffdc_dir_path) |
| |
| # Also printed by FFDC. |
| global host_name |
| global host_ip |
| host = socket.gethostname() |
| host_name, host_ip = gm.get_host_name_ip(host) |
| |
| gp.dprint_var(boot_table, 1) |
| gp.dprint_var(boot_lists) |
| |
| |
| def validate_parms(): |
| |
| r""" |
| Validate all program parameters. |
| """ |
| |
| process_pgm_parms() |
| |
| gp.qprintn() |
| |
| global openbmc_model |
| grv.rvalid_value("openbmc_host") |
| grv.rvalid_value("openbmc_username") |
| grv.rvalid_value("openbmc_password") |
| if os_host != "": |
| grv.rvalid_value("os_username") |
| grv.rvalid_value("os_password") |
| |
| if pdu_host != "": |
| grv.rvalid_value("pdu_username") |
| grv.rvalid_value("pdu_password") |
| grv.rvalid_integer("pdu_slot_no") |
| if openbmc_serial_host != "": |
| grv.rvalid_integer("openbmc_serial_port") |
| if openbmc_model == "": |
| status, ret_values =\ |
| grk.run_key_u("Get BMC System Model") |
| openbmc_model = ret_values |
| BuiltIn().set_global_variable("${openbmc_model}", openbmc_model) |
| grv.rvalid_value("openbmc_model") |
| grv.rvalid_integer("max_num_tests") |
| grv.rvalid_integer("boot_pass") |
| grv.rvalid_integer("boot_fail") |
| |
| plug_in_packages_list = grpi.rvalidate_plug_ins(plug_in_dir_paths) |
| BuiltIn().set_global_variable("${plug_in_packages_list}", |
| plug_in_packages_list) |
| |
| grv.rvalid_value("stack_mode", valid_values=['normal', 'skip']) |
| if len(boot_list) == 0 and len(boot_stack) == 0 and not ffdc_only: |
| error_message = "You must provide either a value for either the" +\ |
| " boot_list or the boot_stack parm.\n" |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |
| valid_boot_list(boot_list, valid_boot_types) |
| valid_boot_list(boot_stack, valid_boot_types) |
| |
| selected_PDU_boots = list(set(boot_list + boot_stack) & |
| set(boot_lists['PDU_reboot'])) |
| |
| if len(selected_PDU_boots) > 0 and pdu_host == "": |
| error_message = "You have selected the following boots which" +\ |
| " require a PDU host but no value for pdu_host:\n" |
| error_message += gp.sprint_var(selected_PDU_boots) |
| error_message += gp.sprint_var(pdu_host, 2) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |
| return |
| |
| |
| def my_get_state(): |
| |
| r""" |
| Get the system state plus a little bit of wrapping. |
| """ |
| |
| global state |
| |
| req_states = ['epoch_seconds'] + st.default_req_states |
| |
| gp.qprint_timen("Getting system state.") |
| if test_mode: |
| state['epoch_seconds'] = int(time.time()) |
| else: |
| state = st.get_state(req_states=req_states, quiet=quiet) |
| gp.qprint_var(state) |
| |
| |
| def valid_state(): |
| |
| r""" |
| Verify that our state dictionary contains no blank values. If we don't get |
| valid state data, we cannot continue to work. |
| """ |
| |
| if st.compare_states(state, st.invalid_state_match, 'or'): |
| error_message = "The state dictionary contains blank fields which" +\ |
| " is illegal.\n" + gp.sprint_var(state) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |
| |
| def select_boot(): |
| |
| r""" |
| Select a boot test to be run based on our current state and return the |
| chosen boot type. |
| |
| Description of arguments: |
| state The state of the machine. |
| """ |
| |
| global transitional_boot_selected |
| global boot_stack |
| |
| gp.qprint_timen("Selecting a boot test.") |
| |
| if transitional_boot_selected and not boot_success: |
| prior_boot = next_boot |
| boot_candidate = boot_stack.pop() |
| gp.qprint_timen("The prior '" + next_boot + "' was chosen to" + |
| " transition to a valid state for '" + boot_candidate + |
| "' which was at the top of the boot_stack. Since" + |
| " the '" + next_boot + "' failed, the '" + |
| boot_candidate + "' has been removed from the stack" + |
| " to avoid and endless failure loop.") |
| if len(boot_stack) == 0: |
| return "" |
| |
| my_get_state() |
| valid_state() |
| |
| transitional_boot_selected = False |
| stack_popped = 0 |
| if len(boot_stack) > 0: |
| stack_popped = 1 |
| gp.qprint_dashes() |
| gp.qprint_var(boot_stack) |
| gp.qprint_dashes() |
| skip_boot_printed = 0 |
| while len(boot_stack) > 0: |
| boot_candidate = boot_stack.pop() |
| if stack_mode == 'normal': |
| break |
| else: |
| if st.compare_states(state, boot_table[boot_candidate]['end']): |
| if not skip_boot_printed: |
| gp.qprint_var(stack_mode) |
| gp.qprintn() |
| gp.qprint_timen("Skipping the following boot tests" + |
| " which are unnecessary since their" + |
| " required end states match the" + |
| " current machine state:") |
| skip_boot_printed = 1 |
| gp.qprint_var(boot_candidate) |
| boot_candidate = "" |
| if boot_candidate == "": |
| gp.qprint_dashes() |
| gp.qprint_var(boot_stack) |
| gp.qprint_dashes() |
| return boot_candidate |
| if st.compare_states(state, boot_table[boot_candidate]['start']): |
| gp.qprint_timen("The machine state is valid for a '" + |
| boot_candidate + "' boot test.") |
| gp.qprint_dashes() |
| gp.qprint_var(boot_stack) |
| gp.qprint_dashes() |
| return boot_candidate |
| else: |
| gp.qprint_timen("The machine state does not match the required" + |
| " starting state for a '" + boot_candidate + |
| "' boot test:") |
| gp.qprint_varx("boot_table[" + boot_candidate + "][start]", |
| boot_table[boot_candidate]['start'], 1) |
| boot_stack.append(boot_candidate) |
| transitional_boot_selected = True |
| popped_boot = boot_candidate |
| |
| # Loop through your list selecting a boot_candidates |
| boot_candidates = [] |
| for boot_candidate in boot_list: |
| if st.compare_states(state, boot_table[boot_candidate]['start']): |
| if stack_popped: |
| if st.compare_states(boot_table[boot_candidate]['end'], |
| boot_table[popped_boot]['start']): |
| boot_candidates.append(boot_candidate) |
| else: |
| boot_candidates.append(boot_candidate) |
| |
| if len(boot_candidates) == 0: |
| gp.qprint_timen("The user's boot list contained no boot tests" + |
| " which are valid for the current machine state.") |
| boot_candidate = default_power_on |
| if not st.compare_states(state, boot_table[default_power_on]['start']): |
| boot_candidate = default_power_off |
| boot_candidates.append(boot_candidate) |
| gp.qprint_timen("Using default '" + boot_candidate + |
| "' boot type to transition to valid state.") |
| |
| gp.dprint_var(boot_candidates) |
| |
| # Randomly select a boot from the candidate list. |
| boot = random.choice(boot_candidates) |
| |
| return boot |
| |
| |
| def print_last_boots(): |
| |
| r""" |
| Print the last ten boots done with their time stamps. |
| """ |
| |
| # indent 0, 90 chars wide, linefeed, char is "=" |
| gp.qprint_dashes(0, 90) |
| gp.qprintn("Last 10 boots:\n") |
| |
| for boot_entry in last_ten: |
| grp.rqprint(boot_entry) |
| gp.qprint_dashes(0, 90) |
| |
| |
| def print_defect_report(ffdc_file_list): |
| |
| r""" |
| Print a defect report. |
| |
| Description of argument(s): |
| ffdc_file_list A list of files which were collected by our ffdc functions. |
| """ |
| |
| # Making deliberate choice to NOT run plug_in_setup(). We don't want |
| # ffdc_prefix updated. |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='ffdc_report', stop_on_plug_in_failure=0) |
| |
| # Get additional header data which may have been created by ffdc plug-ins. |
| # Also, delete the individual header files to cleanup. |
| cmd_buf = "file_list=$(cat " + ffdc_report_list_path + " 2>/dev/null)" +\ |
| " ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\ |
| " 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :" |
| shell_rc, more_header_info = gc.cmd_fnc_u(cmd_buf, print_output=0, |
| show_err=0) |
| |
| # Get additional summary data which may have been created by ffdc plug-ins. |
| # Also, delete the individual header files to cleanup. |
| cmd_buf = "file_list=$(cat " + ffdc_summary_list_path + " 2>/dev/null)" +\ |
| " ; [ ! -z \"${file_list}\" ] && cat ${file_list}" +\ |
| " 2>/dev/null ; rm -rf ${file_list} 2>/dev/null || :" |
| shell_rc, ffdc_summary_info = gc.cmd_fnc_u(cmd_buf, print_output=0, |
| show_err=0) |
| |
| # ffdc_list_file_path contains a list of any ffdc files created by plug- |
| # ins, etc. Read that data into a list. |
| try: |
| plug_in_ffdc_list = \ |
| open(ffdc_list_file_path, 'r').read().rstrip("\n").split("\n") |
| plug_in_ffdc_list = filter(None, plug_in_ffdc_list) |
| except IOError: |
| plug_in_ffdc_list = [] |
| |
| # Combine the files from plug_in_ffdc_list with the ffdc_file_list passed |
| # in. Eliminate duplicates and sort the list. |
| ffdc_file_list = list(set(ffdc_file_list + plug_in_ffdc_list)) |
| ffdc_file_list.sort() |
| |
| if status_file_path != "": |
| ffdc_file_list.insert(0, status_file_path) |
| |
| # Convert the list to a printable list. |
| printable_ffdc_file_list = "\n".join(ffdc_file_list) |
| |
| # Open ffdc_file_list for writing. We will write a complete list of |
| # FFDC files to it for possible use by plug-ins like cp_stop_check. |
| ffdc_list_file = open(ffdc_list_file_path, 'w') |
| ffdc_list_file.write(printable_ffdc_file_list + "\n") |
| ffdc_list_file.close() |
| |
| indent = 0 |
| width = 90 |
| linefeed = 1 |
| char = "=" |
| |
| gp.qprintn() |
| gp.qprint_dashes(indent, width, linefeed, char) |
| gp.qprintn("Copy this data to the defect:\n") |
| |
| if len(more_header_info) > 0: |
| gp.qprintn(more_header_info) |
| gp.qpvars(host_name, host_ip, openbmc_nickname, openbmc_host, |
| openbmc_host_name, openbmc_ip, openbmc_username, |
| openbmc_password, os_host, os_host_name, os_ip, os_username, |
| os_password, pdu_host, pdu_host_name, pdu_ip, pdu_username, |
| pdu_password, pdu_slot_no, openbmc_serial_host, |
| openbmc_serial_host_name, openbmc_serial_ip, openbmc_serial_port) |
| |
| gp.qprintn() |
| print_last_boots() |
| gp.qprintn() |
| gp.qprint_var(state) |
| gp.qprintn() |
| gp.qprintn("FFDC data files:") |
| gp.qprintn(printable_ffdc_file_list) |
| gp.qprintn() |
| |
| if len(ffdc_summary_info) > 0: |
| gp.qprintn(ffdc_summary_info) |
| |
| gp.qprint_dashes(indent, width, linefeed, char) |
| |
| |
| def my_ffdc(): |
| |
| r""" |
| Collect FFDC data. |
| """ |
| |
| global state |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='ffdc', stop_on_plug_in_failure=0) |
| |
| AUTOBOOT_FFDC_PREFIX = os.environ['AUTOBOOT_FFDC_PREFIX'] |
| status, ffdc_file_list = grk.run_key_u("FFDC ffdc_prefix=" + |
| AUTOBOOT_FFDC_PREFIX + |
| " ffdc_function_list=" + |
| ffdc_function_list, ignore=1) |
| if status != 'PASS': |
| gp.qprint_error("Call to ffdc failed.\n") |
| |
| my_get_state() |
| |
| print_defect_report(ffdc_file_list) |
| |
| |
| def print_test_start_message(boot_keyword): |
| |
| r""" |
| Print a message indicating what boot test is about to run. |
| |
| Description of arguments: |
| boot_keyword The name of the boot which is to be run |
| (e.g. "BMC Power On"). |
| """ |
| |
| global last_ten |
| global boot_start_time |
| |
| doing_msg = gp.sprint_timen("Doing \"" + boot_keyword + "\".") |
| |
| # Set boot_start_time for use by plug-ins. |
| boot_start_time = doing_msg[1:33] |
| gp.qprint_var(boot_start_time) |
| |
| gp.qprint(doing_msg) |
| |
| last_ten.append(doing_msg) |
| |
| if len(last_ten) > 10: |
| del last_ten[0] |
| |
| |
| def run_boot(boot): |
| |
| r""" |
| Run the specified boot. |
| |
| Description of arguments: |
| boot The name of the boot test to be performed. |
| """ |
| |
| global state |
| |
| print_test_start_message(boot) |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = \ |
| grpi.rprocess_plug_in_packages(call_point="pre_boot") |
| if rc != 0: |
| error_message = "Plug-in failed with non-zero return code.\n" +\ |
| gp.sprint_var(rc, 1) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |
| if test_mode: |
| # In test mode, we'll pretend the boot worked by assigning its |
| # required end state to the default state value. |
| state = st.strip_anchor_state(boot_table[boot]['end']) |
| else: |
| # Assertion: We trust that the state data was made fresh by the |
| # caller. |
| |
| gp.qprintn() |
| |
| if boot_table[boot]['method_type'] == "keyword": |
| rk.my_run_keywords(boot_table[boot].get('lib_file_path', ''), |
| boot_table[boot]['method'], |
| quiet=quiet) |
| |
| if boot_table[boot]['bmc_reboot']: |
| st.wait_for_comm_cycle(int(state['epoch_seconds'])) |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = \ |
| grpi.rprocess_plug_in_packages(call_point="post_reboot") |
| if rc != 0: |
| error_message = "Plug-in failed with non-zero return code.\n" |
| error_message += gp.sprint_var(rc, 1) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| else: |
| match_state = st.anchor_state(state) |
| del match_state['epoch_seconds'] |
| # Wait for the state to change in any way. |
| st.wait_state(match_state, wait_time=state_change_timeout, |
| interval="10 seconds", invert=1) |
| |
| gp.qprintn() |
| if boot_table[boot]['end']['chassis'] == "Off": |
| boot_timeout = power_off_timeout |
| else: |
| boot_timeout = power_on_timeout |
| st.wait_state(boot_table[boot]['end'], wait_time=boot_timeout, |
| interval="10 seconds") |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = \ |
| grpi.rprocess_plug_in_packages(call_point="post_boot") |
| if rc != 0: |
| error_message = "Plug-in failed with non-zero return code.\n" +\ |
| gp.sprint_var(rc, 1) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |
| |
| def test_loop_body(): |
| |
| r""" |
| The main loop body for the loop in main_py. |
| |
| Description of arguments: |
| boot_count The iteration number (starts at 1). |
| """ |
| |
| global boot_count |
| global state |
| global next_boot |
| global boot_success |
| global boot_end_time |
| |
| gp.qprintn() |
| |
| next_boot = select_boot() |
| if next_boot == "": |
| return True |
| |
| boot_count += 1 |
| gp.qprint_timen("Starting boot " + str(boot_count) + ".") |
| |
| pre_boot_plug_in_setup() |
| |
| cmd_buf = ["run_boot", next_boot] |
| boot_status, msg = BuiltIn().run_keyword_and_ignore_error(*cmd_buf) |
| if boot_status == "FAIL": |
| gp.qprint(msg) |
| |
| gp.qprintn() |
| if boot_status == "PASS": |
| boot_success = 1 |
| completion_msg = gp.sprint_timen("BOOT_SUCCESS: \"" + next_boot + |
| "\" succeeded.") |
| else: |
| boot_success = 0 |
| completion_msg = gp.sprint_timen("BOOT_FAILED: \"" + next_boot + |
| "\" failed.") |
| |
| # Set boot_end_time for use by plug-ins. |
| boot_end_time = completion_msg[1:33] |
| gp.qprint_var(boot_end_time) |
| |
| gp.qprint(completion_msg) |
| |
| boot_results.update(next_boot, boot_status) |
| |
| plug_in_setup() |
| # NOTE: A post_test_case call point failure is NOT counted as a boot |
| # failure. |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='post_test_case', stop_on_plug_in_failure=0) |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='ffdc_check', shell_rc=0x00000200, |
| stop_on_plug_in_failure=1, stop_on_non_zero_rc=1) |
| if boot_status != "PASS" or ffdc_check == "All" or shell_rc == 0x00000200: |
| status, ret_values = grk.run_key_u("my_ffdc", ignore=1) |
| if status != 'PASS': |
| gp.qprint_error("Call to my_ffdc failed.\n") |
| |
| if delete_errlogs: |
| # We need to purge error logs between boots or they build up. |
| grk.run_key("Delete Error logs", ignore=1) |
| |
| boot_results.print_report() |
| gp.qprint_timen("Finished boot " + str(boot_count) + ".") |
| |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='stop_check') |
| if rc != 0: |
| error_message = "Stopping as requested by user.\n" |
| grp.rprint_error_report(error_message) |
| BuiltIn().fail(error_message) |
| |
| # This should help prevent ConnectionErrors. |
| grk.run_key_u("Close All Connections") |
| |
| return True |
| |
| |
| def obmc_boot_test_teardown(): |
| |
| r""" |
| Clean up after the Main keyword. |
| """ |
| |
| if cp_setup_called: |
| plug_in_setup() |
| rc, shell_rc, failed_plug_in_name = grpi.rprocess_plug_in_packages( |
| call_point='cleanup', stop_on_plug_in_failure=0) |
| |
| if 'boot_results_file_path' in globals(): |
| # Save boot_results object to a file in case it is needed again. |
| gp.qprint_timen("Saving boot_results to the following path.") |
| gp.qprint_var(boot_results_file_path) |
| pickle.dump(boot_results, open(boot_results_file_path, 'wb'), |
| pickle.HIGHEST_PROTOCOL) |
| |
| global save_stack |
| # Restore any global values saved on the save_stack. |
| for parm_name in main_func_parm_list: |
| # Get the parm_value if it was saved on the stack. |
| try: |
| parm_value = save_stack.pop(parm_name) |
| except: |
| # If it was not saved, no further action is required. |
| continue |
| |
| # Restore the saved value. |
| cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\ |
| "}\", parm_value)" |
| gp.dpissuing(cmd_buf) |
| exec(cmd_buf) |
| |
| gp.dprintn(save_stack.sprint_obj()) |
| |
| |
| def test_teardown(): |
| |
| r""" |
| Clean up after this test case. |
| """ |
| |
| gp.qprintn() |
| cmd_buf = ["Print Error", |
| "A keyword timeout occurred ending this program.\n"] |
| BuiltIn().run_keyword_if_timeout_occurred(*cmd_buf) |
| |
| grp.rqprint_pgm_footer() |
| |
| |
| def obmc_boot_test_py(loc_boot_stack=None, |
| loc_stack_mode=None, |
| loc_quiet=None): |
| |
| r""" |
| Do main program processing. |
| """ |
| |
| global save_stack |
| |
| # Process function parms. |
| for parm_name in main_func_parm_list: |
| # Get parm's value. |
| cmd_buf = "parm_value = loc_" + parm_name |
| exec(cmd_buf) |
| gp.dpvar(parm_name) |
| gp.dpvar(parm_value) |
| |
| if parm_value is None: |
| # Parm was not specified by the calling function so set it to its |
| # corresponding global value. |
| cmd_buf = "loc_" + parm_name + " = BuiltIn().get_variable_value" +\ |
| "(\"${" + parm_name + "}\")" |
| gp.dpissuing(cmd_buf) |
| exec(cmd_buf) |
| else: |
| # Save the global value on a stack. |
| cmd_buf = "save_stack.push(BuiltIn().get_variable_value(\"${" +\ |
| parm_name + "}\"), \"" + parm_name + "\")" |
| gp.dpissuing(cmd_buf) |
| exec(cmd_buf) |
| |
| # Set the global value to the passed value. |
| cmd_buf = "BuiltIn().set_global_variable(\"${" + parm_name +\ |
| "}\", loc_" + parm_name + ")" |
| gp.dpissuing(cmd_buf) |
| exec(cmd_buf) |
| |
| gp.dprintn(save_stack.sprint_obj()) |
| |
| setup() |
| |
| init_boot_pass, init_boot_fail = boot_results.return_total_pass_fail() |
| |
| if ffdc_only: |
| gp.qprint_timen("Caller requested ffdc_only.") |
| pre_boot_plug_in_setup() |
| grk.run_key_u("my_ffdc") |
| return |
| |
| # Process caller's boot_stack. |
| while (len(boot_stack) > 0): |
| test_loop_body() |
| |
| gp.qprint_timen("Finished processing stack.") |
| |
| # Process caller's boot_list. |
| if len(boot_list) > 0: |
| for ix in range(1, max_num_tests + 1): |
| test_loop_body() |
| |
| gp.qprint_timen("Completed all requested boot tests.") |
| |
| boot_pass, boot_fail = boot_results.return_total_pass_fail() |
| new_fail = boot_fail - init_boot_fail |
| if new_fail > boot_fail_threshold: |
| error_message = "Boot failures exceed the boot failure" +\ |
| " threshold:\n" +\ |
| gp.sprint_var(new_fail) +\ |
| gp.sprint_var(boot_fail_threshold) |
| BuiltIn().fail(gp.sprint_error(error_message)) |
| |