| *** Settings *** |
| Documentation Test BMC multiple network interface functionalities. |
| ... Run on setup with both eth0 and eth1 in static mode. |
| |
| Resource ../../lib/resource.robot |
| Resource ../../lib/common_utils.robot |
| Resource ../../lib/connection_client.robot |
| Resource ../../lib/bmc_network_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Resource ../../lib/bmc_ldap_utils.robot |
| Resource ../../lib/snmp/resource.robot |
| Resource ../../lib/snmp/redfish_snmp_utils.robot |
| Resource ../../lib/certificate_utils.robot |
| Resource ../../lib/protocol_setting_utils.robot |
| Library ../../lib/jobs_processing.py |
| Library OperatingSystem |
| |
| # User input BMC IP for the eth1. |
| # Use can input as -v OPENBMC_HOST_ETH1:xx.xxx.xx from command line. |
| Library ../../lib/bmc_redfish.py https://${OPENBMC_HOST_ETH1}:${HTTPS_PORT} |
| ... ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} AS Redfish1 |
| |
| Suite Setup Suite Setup Execution |
| Test Setup Run Keywords Redfish.Login AND Redfish1.Login |
| Test Teardown Run Keywords FFDC On Test Case Fail AND Redfish.Logout AND Redfish1.Logout |
| Suite Teardown Run Keywords Redfish1.Logout AND Redfish.Logout |
| |
| *** Variables *** |
| |
| ${cmd_prefix} ipmitool -I lanplus -C 17 -p 623 -U ${IPMI_USERNAME} -P ${IPMI_PASSWORD} |
| ${test_ipv4_addr} 10.7.7.7 |
| ${test_ipv4_addr2} 10.7.7.8 |
| ${test_subnet_mask} 255.255.255.0 |
| |
| *** Test Cases *** |
| |
| Verify Both Interfaces BMC IP Addresses Accessible Via SSH |
| [Documentation] Verify both interfaces (eth0, eth1) BMC IP addresses accessible via SSH. |
| [Tags] Verify_Both_Interfaces_BMC_IP_Addresses_Accessible_Via_SSH |
| |
| Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} host=${OPENBMC_HOST} |
| Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} host=${OPENBMC_HOST_ETH1} |
| Close All Connections |
| |
| |
| Verify Redfish Works On Both Interfaces |
| [Documentation] Verify access BMC with both interfaces (eth0, eth1) IP addresses via Redfish. |
| [Tags] Verify_Redfish_Works_On_Both_Interfaces |
| [Teardown] Run Keywords |
| ... Configure Hostname ${hostname} AND Validate Hostname On BMC ${hostname} |
| |
| ${hostname}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName |
| ${data}= Create Dictionary HostName=openbmc |
| Redfish1.patch ${REDFISH_NW_ETH_IFACE}eth1 body=&{data} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| Validate Hostname On BMC openbmc |
| |
| ${resp1}= Redfish.Get ${REDFISH_NW_ETH_IFACE}eth0 |
| ${resp2}= Redfish1.Get ${REDFISH_NW_ETH_IFACE}eth1 |
| Should Be Equal ${resp1.dict['HostName']} ${resp2.dict['HostName']} |
| |
| |
| Verify LDAP Login Works When Eth1 IP Is Not Configured |
| [Documentation] Verify LDAP login works when eth1 IP is erased. |
| [Tags] Verify_LDAP_Login_Works_When_Eth1_IP_Is_Not_Configured |
| [Setup] Run Keywords Set Test Variable ${CHANNEL_NUMBER} ${SECONDARY_CHANNEL_NUMBER} |
| ... AND Redfish.Login AND Delete IP Address ${OPENBMC_HOST_ETH1} |
| [Teardown] Run Keywords Redfish.Logout AND Redfish.Login AND |
| ... Add IP Address ${OPENBMC_HOST_ETH1} ${eth1_subnet_mask} ${eth1_gateway} |
| |
| Create LDAP Configuration |
| Redfish.Logout |
| Sleep 30 |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| |
| Verify LDAP Login Works When Both Interfaces Are Configured |
| [Documentation] Verify LDAP login works when both interfaces are configured. |
| [Tags] Verify_LDAP_Login_Works_When_Both_Interfaces_Are_Configured |
| |
| Create LDAP Configuration |
| Redfish.Logout |
| Sleep 30 |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| |
| Verify Secure LDAP Login Works When Both Interfaces Are Configured |
| [Documentation] Verify Secure LDAP login works when both the interfaces are configured. |
| [Tags] Verify_Secure_LDAP_Login_Works_When_Both_Interfaces_Are_Configured |
| |
| Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI_1} ${LDAP_BIND_DN} |
| ... ${LDAP_BIND_DN_PASSWORD} ${LDAP_BASE_DN} |
| Redfish.Logout |
| Sleep 30 |
| Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD} |
| |
| |
| Verify SNMP Works When Eth1 IP Is Not Configured |
| [Documentation] Verify SNMP works when eth1 IP is not configured. |
| [Tags] Verify_SNMP_Works_When_Eth1_IP_Is_Not_Configured |
| [Setup] Run Keywords Redfish.Login AND |
| ... Set Test Variable ${CHANNEL_NUMBER} ${SECONDARY_CHANNEL_NUMBER} |
| ... AND Delete IP Address ${OPENBMC_HOST_ETH1} |
| [Teardown] Add IP Address ${OPENBMC_HOST_ETH1} ${eth1_subnet_mask} ${eth1_gateway} |
| |
| Create Error On BMC And Verify Trap |
| |
| |
| Disable And Enable Eth0 Interface |
| [Documentation] Disable and Enable eth0 ethernet interface via redfish. |
| [Tags] Disable_And_Enable_Eth0_Interface |
| [Template] Set BMC Ethernet Interfaces State |
| |
| # interface_ip interface enabled |
| ${OPENBMC_HOST} eth0 ${False} |
| ${OPENBMC_HOST} eth0 ${True} |
| |
| |
| Verify Both Interfaces Access Concurrently Via Redfish |
| [Documentation] Verify both interfaces access conurrently via redfish. |
| [Tags] Verify_Both_Interfaces_Access_Concurrently_Via_Redfish |
| |
| ${dict}= Execute Process Multi Keyword ${2} |
| ... Redfish.patch ${REDFISH_NW_ETH_IFACE}eth0 body={'DHCPv4':{'UseDNSServers':${True}}} |
| ... Redfish1.patch ${REDFISH_NW_ETH_IFACE}eth1 body={'DHCPv4':{'UseDNSServers':${True}}} |
| |
| Dictionary Should Not Contain Value ${dict} False |
| ... msg=One or more operations has failed. |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}eth0 |
| ${resp1}= Redfish1.Get ${REDFISH_NW_ETH_IFACE}eth1 |
| |
| Should Be Equal ${resp.dict["DHCPv4"]['UseDNSServers']} ${True} |
| Should Be Equal ${resp1.dict["DHCPv4"]['UseDNSServers']} ${True} |
| |
| Able To Access Serial Console Via Both Network Interfaces |
| [Documentation] Able to access serial console via both network interfaces. |
| [Tags] Able_To_Access_Serial_Console_Via_Both_Network_Interfaces |
| |
| Open Connection And Log In host=${OPENBMC_HOST} port=2200 |
| Open Connection And Log In host=${OPENBMC_HOST_ETH1} port=2200 |
| Close All Connections |
| |
| Verify IPMI Works On Both Network Interfaces |
| [Documentation] Verify IPMI works on both network interfaces. |
| [Tags] Verify_IPMI_Works_On_Both_Network_Interfaces |
| |
| Run IPMI ${OPENBMC_HOST_ETH1} power on |
| ${status1}= Run IPMI ${OPENBMC_HOST} power status |
| ${status2}= Run IPMI ${OPENBMC_HOST_ETH1} power status |
| Should Be Equal ${status1} ${status2} |
| |
| Verify Modifying IP Address Multiple Times On Interface |
| [Documentation] Verify modifying IP address multiple times on interface. |
| [Tags] Verify_Modifying_IP_Address_Multiple_Times_On_Interface |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Redfish.Logout |
| |
| ${test_gateway}= Get BMC Default Gateway |
| Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway} |
| Update IP Address ${test_ipv4_addr2} ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| Run Keyword Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| Run Keyword Wait For Host To Ping ${OPENBMC_HOST_ETH1} ${NETWORK_TIMEOUT} |
| |
| Verify Able To Load Certificates Via Eth1 IP Address |
| [Documentation] Verify able to load certificates via eth1 IP address. |
| [Tags] Verify_Able_To_Load_Certificates_Via_Eth1_IP_Address |
| [Template] Install Certificate Via Redfish And Verify |
| |
| # cert_type cert_format expected_status |
| CA Valid Certificate ok |
| Client Valid Certificate Valid Privatekey ok |
| |
| Enable SSH Protocol Via Eth1 And Verify On Both Interfaces |
| [Documentation] Enable SSH protocol via eth1 and verify on both interfaces. |
| [Tags] Enable_SSH_Protocol_Via_Eth1_And_Verify_On_Both_Interfaces |
| |
| Set SSH Value Via Eth1 ${True} |
| # Check if SSH is really enabled via Redfish via eth1. |
| Verify SSH Protocol State Via Eth1 ${True} |
| # Check if SSH login and commands on SSH session work on both interfaces. |
| Verify SSH Login And Commands Work |
| Verify SSH Login And Commands Work ${OPENBMC_HOST_ETH1} |
| |
| Disable SSH Protocol Via Eth1 And Verify On Both Interfaces |
| [Documentation] Disable SSH protocol via eth1 and verify on both interfaces. |
| [Tags] Disable_SSH_Protocol_Via_Eth1_And_Verify_On_Both_Interfaces |
| [Teardown] Set SSH Value Via Eth1 ${True} |
| |
| Set SSH Value Via Eth1 ${False} |
| # Check if SSH is really disabled via Redfish via eth1. |
| Verify SSH Protocol State Via Eth1 ${False} |
| # Check if SSH login and commands fail on eth1. |
| ${status}= Run Keyword And Return Status |
| ... Verify SSH Login And Commands Work ${OPENBMC_HOST_ETH1} |
| |
| Should Be Equal As Strings ${status} False |
| ... msg=SSH Login and commands are working after disabling SSH via eth1. |
| |
| # Check if SSH login and commands fail. |
| ${status}= Run Keyword And Return Status |
| ... Verify SSH Login And Commands Work |
| |
| Should Be Equal As Strings ${status} False |
| ... msg=SSH Login and commands are working after disabling SSH. |
| |
| *** Keywords *** |
| |
| Get Network Configuration Using Channel Number |
| [Documentation] Get ethernet interface. |
| [Arguments] ${channel_number} |
| |
| # Description of argument(s): |
| # channel_number Ethernet channel number, 1 is for eth0 and 2 is for eth1 (e.g. "1"). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']} |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| |
| @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses |
| RETURN @{network_configurations} |
| |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup task. |
| |
| Valid Value OPENBMC_HOST_ETH1 |
| |
| # Check both interfaces are configured and reachable. |
| Ping Host ${OPENBMC_HOST} |
| Ping Host ${OPENBMC_HOST_ETH1} |
| |
| ${network_configurations}= Get Network Configuration Using Channel Number ${SECONDARY_CHANNEL_NUMBER} |
| FOR ${network_configuration} IN @{network_configurations} |
| |
| IF '${network_configuration['Address']}' == '${OPENBMC_HOST_ETH1}' |
| Set Suite Variable ${eth1_subnet_mask} ${network_configuration['SubnetMask']} |
| Set Suite Variable ${eth1_gateway} ${network_configuration['Gateway']} |
| BREAK |
| END |
| |
| END |
| |
| |
| Set BMC Ethernet Interfaces State |
| [Documentation] Set BMC ethernet interface state. |
| [Arguments] ${interface_ip} ${interface} ${enabled} |
| [Teardown] Redfish1.Logout |
| |
| # Description of argument(s): |
| # interface_ip IP address of ethernet interface. |
| # interface The ethernet interface name (eg. eth0 or eth1). |
| # enabled Indicates interface should be enabled (eg. True or False). |
| |
| Redfish1.Login |
| |
| ${data}= Create Dictionary InterfaceEnabled=${enabled} |
| |
| Redfish1.patch ${REDFISH_NW_ETH_IFACE}${interface} body=&{data} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| ${interface_status}= Redfish1.Get Attribute ${REDFISH_NW_ETH_IFACE}${interface} InterfaceEnabled |
| Should Be Equal ${interface_status} ${enabled} |
| |
| ${status}= Run Keyword And Return Status Ping Host ${interface_ip} |
| |
| IF ${enabled} == ${True} |
| Should Be Equal ${status} ${True} |
| ELSE |
| Should Be Equal ${status} ${False} |
| END |
| |
| |
| Run IPMI |
| [Documentation] Run IPMI command. |
| [Arguments] ${host} ${sub_cmd} |
| |
| # Description of argument(s): |
| # host BMC host name or IP address. |
| # sub_cmd The IPMI command string to be executed. |
| |
| ${rc} ${output}= Run And Return Rc And Output ${cmd_prefix} -H ${host} ${sub_cmd} |
| Should Be Equal As Strings ${rc} 0 |
| RETURN ${output} |
| |
| |
| Install Certificate Via Redfish And Verify |
| [Documentation] Install and verify certificate using Redfish. |
| [Arguments] ${cert_type} ${cert_format} ${expected_status} ${delete_cert}=${True} |
| [Teardown] Remove Directory certificate_dir recursive=True |
| |
| # Description of argument(s): |
| # cert_type Certificate type (e.g. "Client" or "CA"). |
| # cert_format Certificate file format |
| # (e.g. "Valid_Certificate_Valid_Privatekey"). |
| # expected_status Expected status of certificate replace Redfish |
| # request (i.e. "ok" or "error"). |
| # delete_cert Certificate will be deleted before installing if this True. |
| |
| Create Directory certificate_dir |
| # AUTH_URI is a global variable defined in lib/resource.robot |
| Set Test Variable ${AUTH_URI} https://${OPENBMC_HOST_ETH1} |
| IF '${cert_type}' == 'CA' and '${delete_cert}' == '${True}' |
| Delete All CA Certificate Via Redfish |
| ELSE IF '${cert_type}' == 'Client' and '${delete_cert}' == '${True}' |
| Delete Certificate Via BMC CLI ${cert_type} |
| END |
| |
| ${cert_file_path}= Generate Certificate File Via Openssl ${cert_format} |
| ${bytes}= OperatingSystem.Get Binary File ${cert_file_path} |
| ${file_data}= Decode Bytes To String ${bytes} UTF-8 |
| |
| ${certificate_uri}= Set Variable If |
| ... '${cert_type}' == 'Client' ${REDFISH_LDAP_CERTIFICATE_URI} |
| ... '${cert_type}' == 'CA' ${REDFISH_CA_CERTIFICATE_URI} |
| |
| ${cert_id}= Install Certificate File On BMC ${certificate_uri} ${expected_status} data=${file_data} |
| Logging Installed certificate id: ${cert_id} |
| |
| Sleep 30s |
| |
| ${cert_file_content}= OperatingSystem.Get File ${cert_file_path} |
| |
| ${content}= redfish_utils.Get Attribute |
| ... ${certificate_uri}/${cert_id} CertificateString |
| |
| ${bmc_cert_content}= Set Variable If '${expected_status}' == 'ok' |
| ... ${content} |
| |
| IF '${expected_status}' == 'ok' |
| Should Contain ${cert_file_content} ${bmc_cert_content} |
| END |
| RETURN ${cert_id} |
| |
| Set SSH Value Via Eth1 |
| [Documentation] Enable or disable SSH protocol via Eth1. |
| [Arguments] ${enable_value}=${True} |
| |
| # Description of argument(s}: |
| # enable_value Enable or disable SSH, e.g. (true, false). |
| |
| ${ssh_state}= Create Dictionary ProtocolEnabled=${enable_value} |
| ${data}= Create Dictionary SSH=${ssh_state} |
| |
| Redfish1.Login |
| Redfish1.patch ${REDFISH_NW_PROTOCOL_URI} body=&{data} |
| ... valid_status_codes=[${HTTP_NO_CONTENT}] |
| |
| # Wait for timeout for new values to take effect. |
| Sleep ${NETWORK_TIMEOUT}s |
| |
| Verify SSH Protocol State Via Eth1 |
| [Documentation] Verify SSH protocol state via eth1. |
| [Arguments] ${state}=${True} |
| |
| # Description of argument(s}: |
| # state Enable or disable SSH, e.g. (true, false) |
| |
| ${resp}= Redfish1.Get ${REDFISH_NW_PROTOCOL_URI} |
| Should Be Equal As Strings ${resp.dict['SSH']['ProtocolEnabled']} ${state} |
| ... msg=Protocol states are not matching. |