| *** Settings *** |
| |
| Documentation Test BMC dump functionality of OpenBMC. |
| |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/boot_utils.robot |
| Resource ../../lib/dump_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Variables ../../data/pel_variables.py |
| |
| Suite Setup Redfish.Login |
| Test Setup Redfish Delete All BMC Dumps |
| Test Teardown Test Teardown Execution |
| |
| *** Variables *** |
| |
| # Total size of the dump in kilo bytes |
| ${BMC_DUMP_TOTAL_SIZE} ${1024} |
| |
| # Minimum space required for one bmc dump in kilo bytes |
| ${BMC_DUMP_MIN_SPACE_REQD} ${20} |
| ${MAX_DUMP_COUNT} ${20} |
| ${BMC_DUMP_COLLECTOR_PATH} /var/lib/phosphor-debug-collector/dumps |
| |
| *** Test Cases *** |
| |
| Verify Error Response For Already Deleted Dump Id |
| [Documentation] Delete non existing BMC dump and expect an error. |
| [Tags] Verify_Error_Response_For_Already_Deleted_Dump_Id |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| Wait Until Keyword Succeeds 15 sec 5 sec Redfish Delete BMC Dump ${dump_id} |
| Run Keyword And Expect Error ValueError: * Redfish Delete BMC Dump ${dump_id} |
| |
| |
| Verify User Initiated BMC Dump When Host Powered Off |
| [Documentation] Create user initiated BMC dump at host off state and |
| ... verify dump entry for it. |
| [Tags] Verify_User_Initiated_BMC_Dump_When_Host_Powered_Off |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| ${dump_entries}= Get BMC Dump Entries |
| Length Should Be ${dump_entries} 1 |
| List Should Contain Value ${dump_entries} ${dump_id} |
| |
| |
| Verify User Initiated BMC Dump Size |
| [Documentation] Verify user initiated BMC dump size is under 20 MB. |
| [Tags] Verify_User_Initiated_BMC_Dump_Size |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| ${resp}= Redfish.Get Properties /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_id} |
| |
| # Example of response from above Redfish GET request. |
| # "@odata.type": "#LogEntry.v1_7_0.LogEntry", |
| # "AdditionalDataSizeBytes": 31644, |
| # "AdditionalDataURI": "/redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/attachment/9", |
| # "Created": "2020-10-23T06:32:53+00:00", |
| # "DiagnosticDataType": "Manager", |
| # "EntryType": "Event", |
| # "Id": "9", |
| # "Name": "BMC Dump Entry" |
| |
| # Max size for dump is 20 MB = 20x1024x1024 Byte. |
| Should Be True 0 < ${resp["AdditionalDataSizeBytes"]} < 20971520 |
| |
| |
| Verify Internal Failure Initiated BMC Dump Size |
| [Documentation] Verify that the internal failure initiated BMC dump size is under 20 MB. |
| [Tags] Verify_Internal_Failure_Initiated_BMC_Dump_Size |
| |
| Redfish Delete All BMC Dumps |
| |
| # Create an internal failure error log. |
| BMC Execute Command ${CMD_INTERNAL_FAILURE} |
| |
| # Wait for BMC dump to get generated after injecting internal failure. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| |
| # Verify that only one BMC dump is generated after injecting error. |
| ${dump_entries}= Get BMC Dump Entries |
| ${length}= Get length ${dump_entries} |
| Should Be Equal As Integers ${length} ${1} |
| |
| # Max size for dump is 20 MB = 20x1024x1024 Byte. |
| ${resp}= Redfish.Get Properties |
| ... /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_entries[0]} |
| Should Be True 0 < ${resp["AdditionalDataSizeBytes"]} < 20971520 |
| |
| |
| Verify Multiple BMC Dump Creation |
| [Documentation] Verify that multiple BMC dumps can be created one after |
| ... another successfully. |
| [Tags] Verify_Multiple_BMC_Dump_Creation |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_count}= Evaluate random.randint(5, 10) modules=random |
| FOR ${INDEX} IN 1 ${dump_count} |
| Create User Initiated BMC Dump Via Redfish |
| END |
| |
| |
| Verify BMC Dump Default Location In BMC |
| [Documentation] Verify that BMC dump is created in its default location of BMC. |
| [Tags] Verify_BMC_Dump_Default_Location_In_BMC |
| |
| Redfish Power Off stack_mode=skip |
| Redfish Delete All BMC Dumps |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| ${dump_file} ${stderr} ${rc}= BMC Execute Command |
| ... ls ${BMC_DUMP_COLLECTOR_PATH}/${dump_id} |
| Should Be True ${rc} == 0 |
| Should Contain Any ${dump_file} BMCDUMP obmcdump |
| |
| |
| Verify User Initiated BMC Dump When Host Booted |
| [Documentation] Create user initiated BMC dump at host booted state and |
| ... verify dump entry for it. |
| [Tags] Verify_User_Initiated_BMC_Dump_When_Host_Booted |
| |
| Redfish Power On stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| ${dump_entries}= Get BMC Dump Entries |
| Length Should Be ${dump_entries} 1 |
| List Should Contain Value ${dump_entries} ${dump_id} |
| |
| |
| Verify User Initiated BMC Dump At Host Booting |
| [Documentation] Create and verify user initiated BMC dump during Host is powwering on |
| ... or when host booting is in progress. |
| [Tags] Verify_User_Initiated_BMC_Dump_At_Host_Booting |
| |
| Redfish Power Off stack_mode=skip |
| Redfish Delete All BMC Dumps |
| |
| # Initiate power on. |
| Redfish Power Operation On |
| Wait Until Keyword Succeeds 2 min 5 sec Is Boot Progress Changed |
| |
| # Create user initiated BMC dump and verify only one dump is available. |
| Create User Initiated BMC Dump Via Redfish |
| ${dump_entries}= Get BMC Dump Entries |
| Length Should Be ${dump_entries} 1 |
| |
| |
| Verify Dump Persistency On Dump Service Restart |
| [Documentation] Create user dump, restart dump manager service and verify dump |
| ... persistency. |
| [Tags] Verify_Dump_Persistency_On_Dump_Service_Restart |
| |
| Redfish Power Off stack_mode=skip |
| Create User Initiated BMC Dump Via Redfish |
| ${dump_entries_before}= redfish_utils.get_member_list /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries |
| |
| # Restart dump service. |
| BMC Execute Command systemctl restart xyz.openbmc_project.Dump.Manager.service |
| Sleep 10s reason=Wait for BMC dump service to restart properly |
| |
| ${dump_entries_after}= redfish_utils.get_member_list /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries |
| Lists Should Be Equal ${dump_entries_before} ${dump_entries_after} |
| |
| |
| Verify Dump Persistency On BMC Reset |
| [Documentation] Create user dump, reset BMC and verify dump persistency. |
| [Tags] Verify_Dump_Persistency_On_BMC_Reset |
| |
| # Power off host so that dump is not offloaded to host OS. |
| Redfish Power Off stack_mode=skip |
| |
| Create User Initiated BMC Dump Via Redfish |
| ${dump_entries_before}= redfish_utils.get_member_list /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries |
| |
| # Reset BMC. |
| OBMC Reboot (off) stack_mode=skip |
| |
| ${dump_entries_after}= redfish_utils.get_member_list /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries |
| Lists Should Be Equal ${dump_entries_before} ${dump_entries_after} |
| |
| |
| Delete User Initiated BMC Dump And Verify |
| [Documentation] Delete user initiated BMC dump and verify. |
| [Tags] Delete_User_Initiated_BMC_Dump_And_Verify |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| Wait Until Keyword Succeeds 15 sec 5 sec Redfish Delete BMC Dump ${dump_id} |
| |
| ${dump_entries}= Get BMC Dump Entries |
| Should Be Empty ${dump_entries} |
| |
| |
| Delete All User Initiated BMC Dumps And Verify |
| [Documentation] Delete all user initiated BMC dumps and verify. |
| [Tags] Delete_All_User_Initiated_BMC_Dumps_And_Verify |
| |
| # Power off host so that dump is not offloaded to host OS. |
| Redfish Power Off stack_mode=skip |
| |
| # Create some BMC dump. |
| Create User Initiated BMC Dump Via Redfish |
| Create User Initiated BMC Dump Via Redfish |
| |
| Redfish Delete All BMC Dumps |
| ${dump_entries}= Get BMC Dump Entries |
| Should Be Empty ${dump_entries} |
| |
| |
| Create Two User Initiated BMC Dumps |
| [Documentation] Create two user initiated BMC dumps. |
| [Tags] Create_Two_User_Initiated_BMC_Dumps |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id1}= Create User Initiated BMC Dump Via Redfish |
| ${dump_id2}= Create User Initiated BMC Dump Via Redfish |
| |
| ${dump_entries}= Get BMC Dump Entries |
| Length Should Be ${dump_entries} 2 |
| Should Contain ${dump_entries} ${dump_id1} |
| Should Contain ${dump_entries} ${dump_id2} |
| |
| |
| Create Two User Initiated BMC Dumps And Delete One |
| [Documentation] Create two dumps and delete the first. |
| [Tags] Create_Two_User_Initiated_BMC_Dumps_And_Delete_One |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id1}= Create User Initiated BMC Dump Via Redfish |
| ${dump_id2}= Create User Initiated BMC Dump Via Redfish |
| |
| Wait Until Keyword Succeeds 15 sec 5 sec Redfish Delete BMC Dump ${dump_id1} |
| |
| ${dump_entries}= Get BMC Dump Entries |
| Length Should Be ${dump_entries} 1 |
| List Should Contain Value ${dump_entries} ${dump_id2} |
| |
| |
| Create And Delete User Initiated BMC Dump Multiple Times |
| [Documentation] Create and delete user initiated BMC dump multiple times. |
| [Tags] Create_And_Delete_User_Initiated_BMC_Dump_Multiple_Times |
| |
| Redfish Power Off stack_mode=skip |
| FOR ${INDEX} IN 1 10 |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| Wait Until Keyword Succeeds 15 sec 5 sec Redfish Delete BMC Dump ${dump_id} |
| END |
| |
| |
| Verify Maximum BMC Dump Creation |
| [Documentation] Create maximum BMC dump and verify error when dump runs out of space. |
| [Tags] Verify_Maximum_BMC_Dump_Creation |
| [Teardown] Redfish Delete All BMC Dumps |
| |
| # Maximum allowed space for dump is 1024 KB. BMC typically hold 8-14 dumps |
| # before running out of this dump space. So trying to create dumps in 20 |
| # iterations to run out of space. |
| # User can key in the Maximum allowed space for bmc dump and how many iteration. |
| FOR ${n} IN RANGE 0 ${MAX_DUMP_COUNT} |
| Create User Initiated BMC Dump Via Redfish |
| ${dump_space}= Get Disk Usage For Dumps |
| Exit For Loop If ${dump_space} >= (${BMC_DUMP_TOTAL_SIZE} - ${BMC_DUMP_MIN_SPACE_REQD}) |
| END |
| |
| # Check error while creating dump when dump size is full. |
| ${payload}= Create Dictionary DiagnosticDataType=Manager |
| Redfish.Post /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData |
| ... body=${payload} valid_status_codes=[${HTTP_INTERNAL_SERVER_ERROR}] |
| |
| |
| Verify BMC Core Dump When Host Powered Off |
| [Documentation] Verify BMC core dump after application crash at host powered off state. |
| [Tags] Verify_BMC_Core_Dump_When_Host_Powered_Off |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Ensure all dumps are cleaned out. |
| Redfish Delete All BMC Dumps |
| Trigger Core Dump |
| |
| # Verify that BMC dump is available. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| |
| |
| Verify Core Dump Size |
| [Documentation] Verify BMC core dump size is under 20 MB. |
| [Tags] Verify_Core_Dump_Size |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Ensure all dumps are cleaned out. |
| Redfish Delete All BMC Dumps |
| Trigger Core Dump |
| |
| # Verify that BMC dump is available. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| ${dump_entries}= Get BMC Dump Entries |
| ${resp}= Redfish.Get Properties |
| ... /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_entries[0]} |
| |
| # Max size for dump is 20 MB = 20x1024x1024 Byte. |
| Should Be True 0 < ${resp["AdditionalDataSizeBytes"]} < 20971520 |
| |
| |
| Verify Error While Initiating BMC Dump During Dumping State |
| [Documentation] Verify error while initiating BMC dump during dumping state. |
| [Tags] Verify_Error_While_Initiating_BMC_Dump_During_Dumping_State |
| |
| Redfish Power Off stack_mode=skip |
| ${task_id}= Create User Initiated BMC Dump Via Redfish ${1} |
| |
| # Check error while initiating BMC dump while dump in progress. |
| ${payload}= Create Dictionary DiagnosticDataType=Manager |
| Redfish.Post |
| ... /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData |
| ... body=${payload} valid_status_codes=[${HTTP_SERVICE_UNAVAILABLE}] |
| |
| # Wait for above initiated dump to complete. Otherwise, on going dump would impact next test. |
| Wait Until Keyword Succeeds 5 min 15 sec Check Task Completion ${task_id} |
| |
| |
| Verify BMC Dump Create Errors While Another BMC Dump In Progress |
| [Documentation] Verify BMC dump creation error until older BMC dump completion. |
| [Tags] Verify_BMC_Dump_Create_Errors_While_Another_BMC_Dump_In_Progress |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Initiate a BMC dump that returns without completion. |
| ${task_id}= Create User Initiated BMC Dump Via Redfish ${1} |
| ${task_dict}= Redfish.Get Properties /redfish/v1/TaskService/Tasks/${task_id} |
| ${payload}= Create Dictionary DiagnosticDataType=Manager |
| IF '${task_dict['TaskState']}' != 'Completed' |
| ${resp}= Redfish.Post |
| ... /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData |
| ... body=${payload} valid_status_codes=[${HTTP_SERVICE_UNAVAILABLE}] |
| END |
| |
| # Wait for above initiated dump to complete. Otherwise, on going dump would impact next test. |
| Wait Until Keyword Succeeds 5 min 15 sec Check Task Completion ${task_id} |
| |
| |
| Verify Core Dump After Terminating Dump Manager Service |
| [Documentation] Verify initiate core dumps and kill Phosphor-dump-manager. |
| [Tags] Verify_Core_Dump_After_Terminating_Dump_Manager_Service |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Remove all available dumps in BMC. |
| Redfish Delete All BMC Dumps |
| |
| # Find the pid of the phosphor-dump-manage process and kill it. |
| ${cmd_buf}= Catenate kill -s SEGV $(pgrep phosphor-dump-manager) |
| ${cmd_output} ${stderr} ${rc}= BMC Execute Command ${cmd_buf} |
| Should Be Equal As Integers ${rc} ${0} |
| |
| # Verify that BMC dump is available. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| |
| # Verifying that there is only one dump. |
| ${dump_entries}= Get BMC Dump Entries |
| ${length}= Get length ${dump_entries} |
| Should Be Equal As Integers ${length} ${1} |
| |
| |
| Verify Error Log And Dump For Internal Failure |
| [Documentation] Verify error log and dump for internal failure. |
| [Tags] Verify_Error_Log_And_Dump_For_Internal_Failure |
| |
| Redfish Purge Event Log |
| Redfish Delete All BMC Dumps |
| |
| # Create an internal failure error log. |
| BMC Execute Command ${CMD_INTERNAL_FAILURE} |
| |
| # With internal failure, an error log file is generated. Check if |
| # BMC has only one error log for this internal failure. |
| ${resp}= Redfish.Get /redfish/v1/Systems/system/LogServices/CELog/Entries |
| Should Be True ${resp.dict["Members@odata.count"]} == ${1} |
| |
| # Wait for the BMC dump to become available and verify its presence. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| ${dump_entries}= Get BMC Dump Entries |
| ${length}= Get length ${dump_entries} |
| Should Be Equal As Integers ${length} ${1} |
| |
| |
| Verify Core Watchdog Initiated BMC Dump |
| [Documentation] Verify core watchdog timeout initiated BMC dump. |
| [Tags] Verify_Core_Watchdog_Initiated_BMC_Dump |
| |
| Redfish Delete All BMC Dumps |
| Redfish Power Off stack_mode=skip |
| |
| # Trigger watchdog timeout. |
| Redfish Initiate Auto Reboot 2000 |
| |
| # Wait for BMC dump to get generated after injecting watchdog timeout. |
| Wait Until Keyword Succeeds 4 min 20 sec Is BMC Dump Available |
| |
| # Verify that only one BMC dump is available. |
| ${dump_entry_list}= Get BMC Dump Entries |
| ${length}= Get length ${dump_entry_list} |
| Should Be Equal As Integers ${length} ${1} |
| |
| |
| Verify User Initiated BMC Dump Type |
| [Documentation] Download user initiate BMC dump and validates its type. |
| [Tags] Verify_User_Initiated_BMC_Dump_Type |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| |
| # Download BMC dump and verify its size. |
| ${resp}= Redfish.Get /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id} |
| ${redfish_dump_creation_timestamp}= Set Variable ${resp.dict["Created"]} |
| # Download BMC dump and verify its size. |
| ${tarfile}= Download BMC Dump ${dump_id} |
| |
| # Extract dump and verify type of dump from summary.log content: |
| # Wed Aug 30 17:23:29 UTC 2023 Name: BMCDUMP.XXXXXXX.0001005.20230830172329 |
| # Wed Aug 30 17:23:29 UTC 2023 Epochtime: 1693416209 |
| # Wed Aug 30 17:23:29 UTC 2023 ID: 0001005 |
| # Wed Aug 30 17:23:29 UTC 2023 Type: user |
| ${extracted_dump_folder}= Extract BMC Dump BMC_dump.tar.gz ${redfish_dump_creation_timestamp} |
| ${contents}= OperatingSystem.Get File ${extracted_dump_folder}/summary.log |
| Should Match Regexp ${contents} Type:[ ]*user |
| |
| # Clean extracted dump files. |
| Remove Files output output.zst |
| Remove Directory ${extracted_dump_folder} True |
| |
| |
| Verify Retrieve Core Initiated BMC Dump |
| [Documentation] Verify retrieval of core initiated BMC dump. |
| [Tags] Verify_Retrieve_Core_Initiated_BMC_Dump |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Ensure all dumps are cleaned out. |
| Redfish Delete All BMC Dumps |
| Trigger Core Dump |
| |
| # Verify that BMC dump is available. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| |
| ${dump_entries}= Get BMC Dump Entries |
| # Download BMC dump and verify its size. |
| Download BMC Dump ${dump_entries[0]} |
| |
| |
| Verify Retrieve User Initiated BMC Dump |
| [Documentation] Verify retrieval of user initiated BMC dump. |
| [Tags] Verify_Retrieve_User_Initiated_BMC_Dump |
| |
| Redfish Power Off stack_mode=skip |
| ${dump_id}= Create User Initiated BMC Dump Via Redfish |
| |
| # Download BMC dump. |
| Download BMC Dump ${dump_id} |
| |
| |
| Verify Core Initiated BMC Dump Type |
| [Documentation] Download core initiate BMC dump and validates its type. |
| [Tags] Verify_Core_Initiated_BMC_Dump_Type |
| |
| Redfish Power Off stack_mode=skip |
| |
| # Ensure all dumps are cleaned out. |
| Redfish Delete All BMC Dumps |
| Trigger Core Dump |
| |
| # Verify that BMC dump is available. |
| Wait Until Keyword Succeeds 2 min 10 sec Is BMC Dump Available |
| |
| ${dump_entries}= Get BMC Dump Entries |
| |
| # Find the timestamp of BMC dump. |
| ${resp}= Redfish.Get /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_entries[0]} |
| ${redfish_dump_creation_timestamp}= Set Variable ${resp.dict["Created"]} |
| |
| # Download BMC dump and verify its size. |
| ${tarfile}= Download BMC Dump ${dump_entries[0]} |
| |
| # Extract dump and verify type of dump from summary.log content: |
| # Wed Aug 30 17:23:29 UTC 2023 Name: BMCDUMP.XXXXXXX.0001005.20230830172329 |
| # Wed Aug 30 17:23:29 UTC 2023 Epochtime: 1693416209 |
| # Wed Aug 30 17:23:29 UTC 2023 ID: 0001005 |
| # Wed Aug 30 17:23:29 UTC 2023 Type: core |
| |
| ${extracted_dump_folder}= Extract BMC Dump ${tarfile} ${redfish_dump_creation_timestamp} |
| ${contents}= OperatingSystem.Get File ${extracted_dump_folder}/summary.log |
| Should Match Regexp ${contents} Type:[ ]*core |
| |
| # Clean extracted dump files. |
| Remove Files output output.zst |
| Remove Directory ${extracted_dump_folder} True |
| |
| |
| *** Keywords *** |
| |
| Download BMC Dump |
| [Documentation] Download BMC dump and verify its size. |
| [Arguments] ${dump_id} |
| |
| # Description of argument(s): |
| # dump_id An integer value that identifies a particular dump (e.g. 1, 3). |
| |
| ${resp}= Redfish.Get /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id} |
| ${redfish_bmc_dump_size}= Set Variable ${resp.dict["AdditionalDataSizeBytes"]} |
| |
| Initialize OpenBMC |
| ${headers}= Create Dictionary Content-Type=application/octet-stream X-Auth-Token=${XAUTH_TOKEN} |
| |
| ${ret}= Get Request openbmc /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id}/attachment headers=${headers} |
| |
| Should Be Equal As Numbers ${ret.status_code} 200 |
| |
| Create Binary File BMC_dump.tar.gz ${ret.content} |
| ${downloaded_dump_size}= Get File Size BMC_dump.tar.gz |
| Should Be Equal ${downloaded_dump_size} ${redfish_bmc_dump_size} |
| [Return] BMC_dump.tar.gz |
| |
| |
| Extract BMC Dump |
| [Documentation] Extract BMC dump from the tar file and returns the name of |
| ... extracted folder like BMCDUMP.XXXXXXX.0000070.20230706063841. |
| [Arguments] ${filename} ${bmc_dump_timestamp} |
| |
| # Description of argument(s): |
| # filename name of BMC dump tar file. |
| # bmc_dump_timestamp timestamp of generated BMC dump. |
| |
| OperatingSystem.File Should Exist ${filename} |
| ${rc}= Run And Return RC dd if=${filename} of=output.zst bs=1 skip=628 |
| Should Be True 0 == ${rc} |
| |
| ${rc}= Run And Return RC zstd -d output.zst |
| Should Be True 0 == ${rc} |
| |
| ${rc}= Run And Return RC tar -xvf output |
| Should Be True 0 == ${rc} |
| |
| # Find the extracted dump folder identified with BMCDUMP as prefix and |
| # timestamp of dump generation where timestamp format is : 2023-09-27T08:30:17.000000+00:00. |
| ${var}= Fetch From Left ${bmc_dump_timestamp} . |
| ${var}= Remove String ${var} - T : |
| ${bmc_extraction_folders}= OperatingSystem.List Directories In Directory . BMCDUMP*${var} |
| ${cnt}= Get length ${bmc_extraction_folders} |
| should be equal as numbers ${cnt} 1 |
| |
| [Return] ${bmc_extraction_folders}[0] |
| |
| |
| Get BMC Dump Entries |
| [Documentation] Return BMC dump ids list. |
| |
| ${dump_uris}= redfish_utils.get_member_list /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries |
| ${dump_ids}= Create List |
| |
| FOR ${dump_uri} IN @{dump_uris} |
| ${dump_id}= Fetch From Right ${dump_uri} / |
| Append To List ${dump_ids} ${dump_id} |
| END |
| |
| [Return] ${dump_ids} |
| |
| |
| Is BMC Dump Available |
| [Documentation] Verify if BMC dump is available. |
| |
| ${dump_entries}= Get BMC Dump Entries |
| |
| # Verifying that BMC dump is available. |
| ${length}= Get length ${dump_entries} |
| Should Be True 0 < ${length} |
| |
| |
| Get Disk Usage For Dumps |
| [Documentation] Return disk usage in kilobyte for BMC dumps. |
| |
| ${usage_output} ${stderr} ${rc}= BMC Execute Command du -s ${BMC_DUMP_COLLECTOR_PATH} |
| |
| # Example of output from above BMC cli command. |
| # $ du -s /var/lib/phosphor-debug-collector/dumps |
| # 516 /var/lib/phosphor-debug-collector/dumps |
| |
| ${usage_output}= Fetch From Left ${usage_output} / |
| ${usage_output}= Convert To Integer ${usage_output} |
| |
| [return] ${usage_output} |
| |
| |
| Test Teardown Execution |
| [Documentation] Do test teardown operation. |
| |
| FFDC On Test Case Fail |
| Close All Connections |