| *** Settings *** |
| Documentation Network interface configuration and verification |
| ... tests. |
| |
| Resource ../../lib/bmc_redfish_resource.robot |
| Resource ../../lib/bmc_network_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| Library ../../lib/bmc_network_utils.py |
| Library Collections |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Suite Teardown Execution |
| Test Setup Test Setup Execution |
| Test Teardown Test Teardown Execution |
| |
| Force Tags Bmc_Network_Conf |
| |
| *** Variables *** |
| ${test_hostname} openbmc |
| ${test_ipv4_addr} 10.7.7.7 |
| ${test_ipv4_invalid_addr} 0.0.1.a |
| ${test_subnet_mask} 255.255.0.0 |
| ${broadcast_ip} 10.7.7.255 |
| ${loopback_ip} 127.0.0.2 |
| ${multicast_ip} 224.6.6.6 |
| ${out_of_range_ip} 10.7.7.256 |
| ${test_ipv4_addr2} 10.7.7.8 |
| |
| # Valid netmask is 4 bytes long and has continuous block of 1s. |
| # Maximum valid value in each octet is 255 and least value is 0. |
| # 253 is not valid, as binary value is 11111101. |
| ${invalid_netmask} 255.255.253.0 |
| ${alpha_netmask} ff.ff.ff.ff |
| # Maximum value of octet in netmask is 255. |
| ${out_of_range_netmask} 255.256.255.0 |
| ${more_byte_netmask} 255.255.255.0.0 |
| ${less_byte_netmask} 255.255.255 |
| ${threshold_netmask} 255.255.255.255 |
| ${lowest_netmask} 128.0.0.0 |
| |
| # There will be 4 octets in IP address (e.g. xx.xx.xx.xx) |
| # but trying to configure xx.xx.xx |
| ${less_octet_ip} 10.3.36 |
| |
| # For the address 10.6.6.6, the 10.6.6.0 portion describes the |
| # network ID and the 6 describe the host. |
| |
| ${network_id} 10.7.7.0 |
| ${hex_ip} 0xa.0xb.0xc.0xd |
| ${negative_ip} 10.-7.-7.7 |
| @{static_name_servers} 10.5.5.5 |
| @{null_value} null |
| @{empty_dictionary} {} |
| @{string_value} aa.bb.cc.dd |
| |
| *** Test Cases *** |
| |
| Get IP Address And Verify |
| [Documentation] Get IP Address And Verify. |
| [Tags] Get_IP_Address_And_Verify |
| |
| FOR ${network_configuration} IN @{network_configurations} |
| Verify IP On BMC ${network_configuration['Address']} |
| END |
| |
| Get Netmask And Verify |
| [Documentation] Get Netmask And Verify. |
| [Tags] Get_Netmask_And_Verify |
| |
| FOR ${network_configuration} IN @{network_configurations} |
| Verify Netmask On BMC ${network_configuration['SubnetMask']} |
| END |
| |
| Get Gateway And Verify |
| [Documentation] Get gateway and verify it's existence on the BMC. |
| [Tags] Get_Gateway_And_Verify |
| |
| FOR ${network_configuration} IN @{network_configurations} |
| Verify Gateway On BMC ${network_configuration['Gateway']} |
| END |
| |
| Get MAC Address And Verify |
| [Documentation] Get MAC address and verify it's existence on the BMC. |
| [Tags] Get_MAC_Address_And_Verify |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ${macaddr}= Get From Dictionary ${resp.dict} MACAddress |
| Validate MAC On BMC ${macaddr} |
| |
| Verify All Configured IP And Netmask |
| [Documentation] Verify all configured IP and netmask on BMC. |
| [Tags] Verify_All_Configured_IP_And_Netmask |
| |
| FOR ${network_configuration} IN @{network_configurations} |
| Verify IP And Netmask On BMC ${network_configuration['Address']} |
| ... ${network_configuration['SubnetMask']} |
| END |
| |
| Get Hostname And Verify |
| [Documentation] Get hostname via Redfish and verify. |
| [Tags] Get_Hostname_And_Verify |
| |
| ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName |
| |
| Validate Hostname On BMC ${hostname} |
| |
| Configure Hostname And Verify |
| [Documentation] Configure hostname via Redfish and verify. |
| [Tags] Configure_Hostname_And_Verify |
| [Teardown] Run Keywords |
| ... Configure Hostname ${hostname} AND Validate Hostname On BMC ${hostname} |
| |
| ${hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName |
| |
| Configure Hostname ${test_hostname} |
| Validate Hostname On BMC ${test_hostname} |
| |
| # Verify configured hostname via redfish. |
| ${new_hostname}= Redfish_Utils.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName |
| Should Be Equal ${new_hostname} ${test_hostname} |
| |
| Configure Invalid HostName And Verify |
| [Documentation] Configure invalid hostname via Redfish and Verify. |
| [Tags] Configure_Invalid_HostName_And_Verify |
| [Template] Configure Hostname |
| |
| # hostname status_code |
| !#@ [${HTTP_BAD_REQUEST}] |
| ${EMPTY} [${HTTP_BAD_REQUEST}] |
| |
| Add Valid IPv4 Address And Verify |
| [Documentation] Add IPv4 Address via Redfish and verify. |
| [Tags] Add_Valid_IPv4_Address_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| |
| Add Invalid IPv4 Address And Verify |
| [Documentation] Add Invalid IPv4 Address via Redfish and verify. |
| [Tags] Add_Invalid_IPv4_Address_And_Verify |
| |
| Add IP Address ${test_ipv4_invalid_addr} ${test_subnet_mask} |
| ... ${test_gateway} valid_status_codes=${HTTP_BAD_REQUEST} |
| |
| Configure Out Of Range IP |
| [Documentation] Configure out-of-range IP address. |
| [Tags] Configure_Out_Of_Range_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${out_of_range_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Broadcast IP |
| [Documentation] Configure broadcast IP address. |
| [Tags] Configure_Broadcast_IP |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${broadcast_ip} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${broadcast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Multicast IP |
| [Documentation] Configure multicast IP address. |
| [Tags] Configure_Multicast_IP |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${multicast_ip} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${multicast_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Loopback IP |
| [Documentation] Configure loopback IP address. |
| [Tags] Configure_Loopback_IP |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${loopback_ip} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${loopback_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Add Valid IPv4 Address And Check Persistency |
| [Documentation] Add IPv4 address and check persistency. |
| [Tags] Add_Valid_IPv4_Address_And_Check_Persistency |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| |
| # Reboot BMC and verify persistency. |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish.Login |
| Verify IP On BMC ${test_ipv4_addr} |
| Verify IP On Redfish URI ${test_ipv4_addr} |
| |
| |
| Add Fourth Octet Threshold IP And Verify |
| [Documentation] Add fourth octet threshold IP and verify. |
| [Tags] Add_Fourth_Octet_Threshold_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.7.7.254 AND Test Teardown Execution |
| |
| Add IP Address 10.7.7.254 ${test_subnet_mask} ${test_gateway} |
| |
| Add Fourth Octet Lowest IP And Verify |
| [Documentation] Add fourth octet lowest IP and verify. |
| [Tags] Add_Fourth_Octet_Lowest_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.7.7.1 AND Test Teardown Execution |
| |
| Add IP Address 10.7.7.1 ${test_subnet_mask} ${test_gateway} |
| |
| Add Third Octet Threshold IP And Verify |
| [Documentation] Add third octet threshold IP and verify. |
| [Tags] Add_Third_Octet_Threshold_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.7.255.7 AND Test Teardown Execution |
| |
| Add IP Address 10.7.255.7 ${test_subnet_mask} ${test_gateway} |
| |
| Add Third Octet Lowest IP And Verify |
| [Documentation] Add third octet lowest IP and verify. |
| [Tags] Add_Third_Octet_Lowest_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.7.0.7 AND Test Teardown Execution |
| |
| Add IP Address 10.7.0.7 ${test_subnet_mask} ${test_gateway} |
| |
| Add Second Octet Threshold IP And Verify |
| [Documentation] Add second octet threshold IP and verify. |
| [Tags] Add_Second_Octet_Threshold_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.255.7.7 AND Test Teardown Execution |
| |
| Add IP Address 10.255.7.7 ${test_subnet_mask} ${test_gateway} |
| |
| Add Second Octet Lowest IP And Verify |
| [Documentation] Add second octet lowest IP and verify. |
| [Tags] Add_Second_Octet_Lowest_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 10.0.7.7 AND Test Teardown Execution |
| |
| Add IP Address 10.0.7.7 ${test_subnet_mask} ${test_gateway} |
| |
| Add First Octet Threshold IP And Verify |
| [Documentation] Add first octet threshold IP and verify. |
| [Tags] Add_First_Octet_Threshold_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 223.7.7.7 AND Test Teardown Execution |
| |
| Add IP Address 223.7.7.7 ${test_subnet_mask} ${test_gateway} |
| |
| Add First Octet Lowest IP And Verify |
| [Documentation] Add first octet lowest IP and verify. |
| [Tags] Add_First_Octet_Lowest_IP_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address 1.7.7.7 AND Test Teardown Execution |
| |
| Add IP Address 1.7.7.7 ${test_subnet_mask} ${test_gateway} |
| |
| Configure Invalid Netmask |
| [Documentation] Verify error while setting invalid netmask. |
| [Tags] Configure_Invalid_Netmask |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${invalid_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Out Of Range Netmask |
| [Documentation] Verify error while setting out of range netmask. |
| [Tags] Configure_Out_Of_Range_Netmask |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${out_of_range_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Alpha Netmask |
| [Documentation] Verify error while setting alpha netmask. |
| [Tags] Configure_Alpha_Netmask |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${alpha_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure More Byte Netmask |
| [Documentation] Verify error while setting more byte netmask. |
| [Tags] Configure_More_Byte_Netmask |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${more_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Less Byte Netmask |
| [Documentation] Verify error while setting less byte netmask. |
| [Tags] Configure_Less_Byte_Netmask |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${less_byte_netmask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Threshold Netmask And Verify |
| [Documentation] Configure threshold netmask and verify. |
| [Tags] Configure_Threshold_Netmask_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${threshold_netmask} ${test_gateway} |
| |
| Configure Lowest Netmask And Verify |
| [Documentation] Configure lowest netmask and verify. |
| [Tags] Configure_Lowest_Netmask_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${lowest_netmask} ${test_gateway} |
| |
| Configure Network ID |
| [Documentation] Verify error while configuring network ID. |
| [Tags] Configure_Network_ID |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${network_id} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${network_id} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Less Octet IP |
| [Documentation] Verify error while Configuring less octet IP address. |
| [Tags] Configure_Less_Octet_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${less_octet_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Empty IP |
| [Documentation] Verify error while Configuring empty IP address. |
| [Tags] Configure_Empty_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${EMPTY} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Special Char IP |
| [Documentation] Configure invalid IP address containing special chars. |
| [Tags] Configure_Special_Char_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| @@@.%%.44.11 ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Hexadecimal IP |
| [Documentation] Configure invalid IP address containing hex value. |
| [Tags] Configure_Hexadecimal_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${hex_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Negative Octet IP |
| [Documentation] Configure invalid IP address containing negative octet. |
| [Tags] Configure_Negative_Octet_IP |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${negative_ip} ${test_subnet_mask} ${test_gateway} ${HTTP_BAD_REQUEST} |
| |
| Configure Incomplete IP For Gateway |
| [Documentation] Configure incomplete IP for gateway and expect an error. |
| [Tags] Configure_Incomplete_IP_For_Gateway |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${less_octet_ip} ${HTTP_BAD_REQUEST} |
| |
| Configure Special Char IP For Gateway |
| [Documentation] Configure special char IP for gateway and expect an error. |
| [Tags] Configure_Special_Char_IP_For_Gateway |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} @@@.%%.44.11 ${HTTP_BAD_REQUEST} |
| |
| Configure Hexadecimal IP For Gateway |
| [Documentation] Configure hexadecimal IP for gateway and expect an error. |
| [Tags] Configure_Hexadecimal_IP_For_Gateway |
| [Template] Add IP Address |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${hex_ip} ${HTTP_BAD_REQUEST} |
| |
| Get DNS Server And Verify |
| [Documentation] Get DNS server via Redfish and verify. |
| [Tags] Get_DNS_Server_And_Verify |
| |
| Verify CLI and Redfish Nameservers |
| |
| Configure DNS Server And Verify |
| [Documentation] Configure DNS server and verify. |
| [Tags] Configure_DNS_Server_And_Verify |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Configure Static Name Servers ${static_name_servers} |
| Verify CLI and Redfish Nameservers |
| |
| Delete DNS Server And Verify |
| [Documentation] Delete DNS server and verify. |
| [Tags] Delete_DNS_Server_And_Verify |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Delete Static Name Servers |
| Verify CLI and Redfish Nameservers |
| |
| Configure DNS Server And Check Persistency |
| [Documentation] Configure DNS server and check persistency on reboot. |
| [Tags] Configure_DNS_Server_And_Check_Persistency |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Configure Static Name Servers ${static_name_servers} |
| # Reboot BMC and verify persistency. |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish.Login |
| Verify CLI and Redfish Nameservers |
| |
| Configure Loopback IP For Gateway |
| [Documentation] Configure loopback IP for gateway and expect an error. |
| [Tags] Configure_Loopback_IP_For_Gateway |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${loopback_ip} ${HTTP_BAD_REQUEST} |
| |
| Configure Network ID For Gateway |
| [Documentation] Configure network ID for gateway and expect an error. |
| [Tags] Configure_Network_ID_For_Gateway |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${network_id} ${HTTP_BAD_REQUEST} |
| |
| Configure Multicast IP For Gateway |
| [Documentation] Configure multicast IP for gateway and expect an error. |
| [Tags] Configure_Multicast_IP_For_Gateway |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${multicast_ip} ${HTTP_BAD_REQUEST} |
| |
| Configure Broadcast IP For Gateway |
| [Documentation] Configure broadcast IP for gateway and expect an error. |
| [Tags] Configure_Broadcast_IP_For_Gateway |
| [Template] Add IP Address |
| [Teardown] Clear IP Settings On Fail ${test_ipv4_addr} |
| |
| # ip subnet_mask gateway valid_status_codes |
| ${test_ipv4_addr} ${test_subnet_mask} ${broadcast_ip} ${HTTP_BAD_REQUEST} |
| |
| Configure Null Value For DNS Server |
| [Documentation] Configure null value for DNS server and expect an error. |
| [Tags] Configure_Null_Value_For_DNS_Server |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Configure Static Name Servers ${null_value} ${HTTP_BAD_REQUEST} |
| |
| Configure Empty Value For DNS Server |
| [Documentation] Configure empty value for DNS server and expect an error. |
| [Tags] Configure_Empty_Value_For_DNS_Server |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Configure Static Name Servers ${empty_dictionary} ${HTTP_BAD_REQUEST} |
| |
| Configure String Value For DNS Server |
| [Documentation] Configure string value for DNS server and expect an error. |
| [Tags] Configure_String_Value_For_DNS_Server |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| Configure Static Name Servers ${string_value} ${HTTP_BAD_REQUEST} |
| |
| Modify IPv4 Address And Verify |
| [Documentation] Modify IP address via Redfish and verify. |
| [Tags] Modify_IPv4_Address_And_Verify |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr2} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| |
| Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway} |
| |
| Verify Modifying IP Address Multiple Times |
| [Documentation] Verify modifying IP address multiple times. |
| [Tags] Verify_Modifying_IP_Address_Multiple_Times |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Test Teardown Execution |
| |
| Add IP Address ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| Update IP Address ${test_ipv4_addr} ${test_ipv4_addr2} ${test_subnet_mask} ${test_gateway} |
| Update IP Address ${test_ipv4_addr2} ${test_ipv4_addr} ${test_subnet_mask} ${test_gateway} |
| |
| Configure Invalid Values For DNS Server |
| [Documentation] Configure invalid values for DNS server and expect an error. |
| [Tags] Configure_Invalid_Values_For_DNS_Server |
| [Setup] DNS Test Setup Execution |
| [Template] Configure Static Name Servers |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| # static_name_servers valid_status_codes |
| 0xa.0xb.0xc.0xd ${HTTP_BAD_REQUEST} |
| 10.-7.-7.-7 ${HTTP_BAD_REQUEST} |
| 10.3.36 ${HTTP_BAD_REQUEST} |
| @@@.%%.44.11 ${HTTP_BAD_REQUEST} |
| |
| |
| Config Multiple DNS Servers And Verify |
| [Documentation] Config multiple DNS servers and verify. |
| [Tags] Config_Multiple_DNS_Servers_And_Verify |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| @{list_name_servers}= Create List 10.5.5.10 10.20.5.10 10.5.6.7 |
| Configure Static Name Servers ${list_name_servers} |
| Verify CLI and Redfish Nameservers |
| |
| |
| Configure And Verify Multiple Static IPv4 Addresses |
| [Documentation] Configure multiple static ipv4 address via Redfish and verify. |
| [Tags] Configure_And_Verify_Multiple_Static_IPv4_Addresses |
| [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} |
| ... AND Test Teardown Execution |
| |
| ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} |
| Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} |
| |
| |
| Configure Multiple Static IPv4 Addresses And Check Persistency |
| [Documentation] Configure multiple static ipv4 address via Redfish and check persistency. |
| [Tags] Configure_Multiple_Static_IPv4_Addresses_And_Check_Persistency |
| [Teardown] Run Keywords Delete Multiple Static IPv4 Addresses ${test_ipv4_addresses} |
| ... AND Test Teardown Execution |
| |
| ${test_ipv4_addresses}= Create List ${test_ipv4_addr} ${test_ipv4_addr2} |
| Configure Multiple Static IPv4 Addresses ${test_ipv4_addresses} ${test_subnet_mask} ${test_gateway} |
| |
| # Reboot BMC and verify persistency. |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish.Login |
| FOR ${ip} IN @{test_ipv4_addresses} |
| Verify IP And Netmask On BMC ${ip} ${test_subnet_mask} |
| Verify IP On Redfish URI ${ip} |
| END |
| |
| |
| Configure And Verify Multiple IPv4 Addresses |
| [Documentation] Configure multiple IPv4 addresses and verify. |
| [Tags] Configure_And_Verify_Multiple_IPv4_Addresses |
| [Teardown] Run Keywords |
| ... Delete IP Address ${test_ipv4_addr} AND Delete IP Address ${test_ipv4_addr2} |
| ... AND Test Teardown Execution |
| |
| ${ip1}= Create dictionary Address=${test_ipv4_addr} |
| ... SubnetMask=255.255.0.0 Gateway=${test_gateway} |
| ${ip2}= Create dictionary Address=${test_ipv4_addr2} |
| ... SubnetMask=255.255.252.0 Gateway=${test_gateway} |
| |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| ${network_configurations}= Get Network Configuration |
| ${num_entries}= Get Length ${network_configurations} |
| |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| # We need not check for existence of IP on BMC while adding. |
| Append To List ${patch_list} ${ip1} ${ip2} |
| ${payload}= Create Dictionary IPv4StaticAddresses=${patch_list} |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} body=&{payload} |
| ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}] |
| |
| # Note: Network restart takes around 15-18s after patch request processing. |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |
| Verify IP On BMC ${test_ipv4_addr} |
| Verify IP On BMC ${test_ipv4_addr2} |
| |
| |
| Config Multiple DNS Servers And Check Persistency |
| [Documentation] Config multiple DNS and check persistency. |
| [Tags] Config_Multiple_DNS_Servers_And_Check_Persistency |
| [Setup] DNS Test Setup Execution |
| [Teardown] Run Keywords |
| ... Configure Static Name Servers AND Test Teardown Execution |
| |
| @{list_name_servers}= Create List 10.5.5.10 10.20.5.10 10.5.6.7 |
| Configure Static Name Servers ${list_name_servers} |
| |
| # Reboot BMC and verify persistency. |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish.Login |
| Verify CLI and Redfish Nameservers |
| |
| |
| Configure Static IP Without Using Gateway And Verify |
| [Documentation] Configure static IP without using gateway and verify error. |
| [Tags] Configure_Static_IP_Without_Using_Gateway_And_Verify |
| |
| ${ip}= Create dictionary Address=${test_ipv4_addr} |
| ... SubnetMask=${test_subnet_mask} |
| ${empty_dict}= Create Dictionary |
| ${patch_list}= Create List |
| ${network_configurations}= Get Network Configuration |
| |
| ${num_entries}= Get Length ${network_configurations} |
| FOR ${INDEX} IN RANGE 0 ${num_entries} |
| Append To List ${patch_list} ${empty_dict} |
| END |
| |
| # We need not check for existence of IP on BMC while adding. |
| Append To List ${patch_list} ${ip} |
| ${payload}= Create Dictionary IPv4StaticAddresses=${patch_list} |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=&{payload} valid_status_codes=[${HTTP_BAD_REQUEST}] |
| |
| |
| Test Network Response On Specified Host State |
| [Documentation] Verifying the BMC network response when host is on and off. |
| [Tags] Test_Network_Response_On_Specified_Host_State |
| [Template] Verify Network Response On Specified Host State |
| |
| # host_state |
| on |
| off |
| |
| |
| *** Keywords *** |
| |
| Test Setup Execution |
| [Documentation] Test setup execution. |
| |
| Redfish.Login |
| |
| @{network_configurations}= Get Network Configuration |
| Set Test Variable @{network_configurations} |
| |
| # Get BMC IP address and prefix length. |
| ${ip_data}= Get BMC IP Info |
| Set Test Variable ${ip_data} |
| |
| |
| Verify Netmask On BMC |
| [Documentation] Verify netmask on BMC. |
| [Arguments] ${netmask} |
| |
| # Description of the argument(s): |
| # netmask netmask value to be verified. |
| |
| ${prefix_length}= Netmask Prefix Length ${netmask} |
| |
| Should Contain Match ${ip_data} */${prefix_length} |
| ... msg=Prefix length does not exist. |
| |
| Verify IP And Netmask On BMC |
| [Documentation] Verify IP and netmask on BMC. |
| [Arguments] ${ip} ${netmask} |
| |
| # Description of the argument(s): |
| # ip IP address to be verified. |
| # netmask netmask value to be verified. |
| |
| ${prefix_length}= Netmask Prefix Length ${netmask} |
| @{ip_data}= Get BMC IP Info |
| |
| ${ip_with_netmask}= Catenate ${ip}/${prefix_length} |
| Should Contain ${ip_data} ${ip_with_netmask} |
| ... msg=IP and netmask pair does not exist. |
| |
| Test Teardown Execution |
| [Documentation] Test teardown execution. |
| |
| FFDC On Test Case Fail |
| Redfish.Logout |
| |
| Clear IP Settings On Fail |
| [Documentation] Clear IP settings on fail. |
| [Arguments] ${ip} |
| |
| # Description of argument(s): |
| # ip IP address to be deleted. |
| |
| Run Keyword If '${TEST STATUS}' == 'FAIL' |
| ... Delete IP Address ${ip} |
| |
| Test Teardown Execution |
| |
| Verify CLI and Redfish Nameservers |
| [Documentation] Verify that nameservers obtained via Redfish do not |
| ... match those found in /etc/resolv.conf. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${redfish_nameservers}= Redfish.Get Attribute |
| ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers |
| ${resolve_conf_nameservers}= CLI Get Nameservers |
| Rqprint Vars redfish_nameservers resolve_conf_nameservers |
| |
| List Should Contain Sub List ${resolve_conf_nameservers} ${redfish_nameservers} |
| ... msg=The nameservers obtained via Redfish do not match those found in /etc/resolv.conf. |
| |
| Configure Static Name Servers |
| [Documentation] Configure DNS server on BMC. |
| [Arguments] ${static_name_servers}=${original_nameservers} |
| ... ${valid_status_codes}=${HTTP_OK} |
| |
| # Description of the argument(s): |
| # static_name_servers A list of static name server IPs to be |
| # configured on the BMC. |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${type} = Evaluate type($static_name_servers).__name__ |
| ${static_name_servers}= Set Variable If '${type}'=='str' |
| ... '${static_name_servers}' ${static_name_servers} |
| |
| # Currently BMC is sending 500 response code instead of 400 for invalid scenarios. |
| Redfish.Patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body={'StaticNameServers': ${static_name_servers}} |
| ... valid_status_codes=[${valid_status_codes}, ${HTTP_INTERNAL_SERVER_ERROR}] |
| |
| # Patch operation takes 1 to 3 seconds to set new value. |
| Wait Until Keyword Succeeds 1 min 3 sec CLI Get and Verify Name Servers ${static_name_servers} ${valid_status_codes} |
| |
| Delete Static Name Servers |
| [Documentation] Delete static name servers. |
| |
| DNS Test Setup Execution |
| Configure Static Name Servers static_name_servers=@{EMPTY} |
| |
| # Check if all name servers deleted on BMC. |
| ${nameservers}= CLI Get Nameservers |
| Should Not Contain ${nameservers} ${original_nameservers} |
| |
| DNS Test Setup Execution |
| |
| Should Be Empty ${original_nameservers} |
| |
| DNS Test Setup Execution |
| [Documentation] Do DNS test setup execution. |
| |
| Redfish.Login |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| ${original_nameservers}= Redfish.Get Attribute |
| ... ${REDFISH_NW_ETH_IFACE}${ethernet_interface} StaticNameServers |
| |
| Rprint Vars original_nameservers |
| # Set suite variables to trigger restoration during teardown. |
| Set Suite Variable ${original_nameservers} |
| |
| |
| Suite Setup Execution |
| [Documentation] Do suite setup execution. |
| |
| # - Get DHCP IPv4 enabled/disabled status from redfish managers URI |
| # - If DHCP IPv4 is enabled , |
| # - Get DHCP IPv4 settings - ip address, gateway, subnetmask |
| # - And set the same as static IP address |
| |
| Redfish.Login |
| ${DHCPEnabled}= Get IPv4 DHCP Enabled Status ${CHANNEL_NUMBER} |
| Set Suite Variable ${DHCPEnabled} |
| |
| ${ip_addr} ${gateway} ${subnetmask}= Run Keyword If ${DHCPEnabled}==True |
| ... Get DHCP IP Info |
| |
| Run Keyword If ${DHCPEnabled}==True |
| ... Add IP Address ${ip_addr} ${subnetmask} ${gateway} |
| |
| ${test_gateway}= Get BMC Default Gateway |
| Set Suite Variable ${test_gateway} |
| |
| |
| Suite Teardown Execution |
| [Documentation] Do suite teardown execution. |
| |
| # - If the DHCP IPv4 is enabled before suite setup execution |
| # - Restore the DHCP IPv4 to enabled state |
| |
| Redfish.Login |
| Run Keyword If ${DHCPEnabled}==True |
| ... Enable IPv4 DHCP Settings |
| |
| |
| Configure Multiple Static IPv4 Addresses |
| [Documentation] Configure multiple static ipv4 address via Redfish and verify. |
| [Arguments] ${ip_addreses} ${subnet_mask} ${gateway} |
| |
| # Description of argument(s): |
| # ip_addreses A list of IP addresses to be added (e.g.["10.7.7.7"]). |
| # subnet_mask Subnet mask for the IP to be added (e.g. "255.255.0.0"). |
| # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). |
| |
| FOR ${ip} IN @{ip_addreses} |
| Add IP Address ${ip} ${subnet_mask} ${gateway} |
| END |
| Validate Network Config On BMC |
| |
| |
| Delete Multiple Static IPv4 Addresses |
| [Documentation] Delete multiple static ipv4 address via Redfish. |
| [Arguments] ${ip_addreses} |
| |
| # Description of argument(s): |
| # ip_addreses A list of IP addresses to be deleted (e.g.["10.7.7.7"]). |
| |
| FOR ${ip} IN @{ip_addreses} |
| Delete IP Address ${ip} |
| END |
| Validate Network Config On BMC |
| |
| Verify Network Response On Specified Host State |
| [Documentation] Verifying the BMC network response when host is on and off. |
| [Arguments] ${host_state} |
| |
| # Description of argument(s): |
| # host_state if host_state is on then host is booted to operating system. |
| # if host_state is off then host is power off. |
| # (eg. on, off). |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| |
| Run Keyword If '${host_state}' == 'on' |
| ... Redfish Power On stack_mode=skip |
| ... ELSE |
| ... Redfish Power off stack_mode=skip |
| |
| Redfish.Get ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| Ping Host ${OPENBMC_HOST} |
| |
| |
| Verify IP On Redfish URI |
| [Documentation] Verify given IP on redfish URI. |
| [Arguments] ${ip_address} |
| |
| # Description of argument(s): |
| # ip_address Configured IP address which need to verified. |
| |
| ${network_configurations}= Get Network Configuration |
| |
| FOR ${network_configuration} IN @{network_configurations} |
| ${ip_found}= Set Variable If '${network_configuration['Address']}' == '${ip_address}' ${True} |
| ... ${False} |
| Exit For Loop If ${ip_found} |
| END |
| Run Keyword If '${ip_found}' == '${False}' |
| ... Fail msg=Configured IP address not found on EthernetInterface URI. |
| |
| |
| Enable IPv4 DHCP Settings |
| [Documentation] Set IPv4 DHCP enabled status true/false in redfish URI. |
| [Arguments] ${status}=${True} |
| |
| # Description of argument(s): |
| # status IPv4 DHCPEnabled status which needs to be set. |
| # (e.g. True or False) |
| |
| ${active_channel_config}= Get Active Channel Config |
| ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${DHCPv4}= Create Dictionary DHCPEnabled=${status} |
| |
| ${payload}= Create Dictionary DHCPv4=${DHCPv4} |
| Redfish.patch ${REDFISH_NW_ETH_IFACE}${ethernet_interface} |
| ... body=&{payload} valid_status_codes=[${HTTP_NO_CONTENT}, ${HTTP_OK}] |
| |
| Sleep ${NETWORK_TIMEOUT}s |
| Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT} |