blob: 6be2fa7692dfdf8eee44453c318e7a2134010fde [file] [log] [blame]
*** Settings ***
Documentation Test BMC manager time functionality.
Resource ../../lib/resource.robot
Resource ../../lib/bmc_redfish_resource.robot
Resource ../../lib/common_utils.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/utils.robot
Resource ../../lib/rest_client.robot
Library ../../lib/gen_robot_valid.py
Test Setup Printn
Test Teardown Test Teardown Execution
Suite Setup Suite Setup Execution
Suite Teardown Suite Teardown Execution
*** Variables ***
${max_time_diff_in_seconds} 6
# The "offset" consists of the value "26" specified for hours. Redfish will
# convert that to the next day + 2 hours.
${date_time_with_offset} 2019-04-25T26:24:46+00:00
${expected_date_time} 2019-04-26T02:24:46+00:00
${invalid_datetime} "2019-04-251T12:24:46+00:00"
${ntp_server_1} 9.9.9.9
${ntp_server_2} 2.2.3.3
&{original_ntp} &{EMPTY}
*** Test Cases ***
Verify Redfish BMC Time
[Documentation] Verify that date/time obtained via redfish matches
... date/time obtained via BMC command line.
[Tags] Verify_Redfish_BMC_Time
${redfish_date_time}= Redfish Get DateTime
${cli_date_time}= CLI Get BMC DateTime
${time_diff}= Subtract Date From Date ${cli_date_time}
... ${redfish_date_time}
${time_diff}= Evaluate abs(${time_diff})
Rprint Vars redfish_date_time cli_date_time time_diff
Should Be True ${time_diff} < ${max_time_diff_in_seconds}
... The difference between Redfish time and CLI time exceeds the allowed time difference.
Verify Set Time Using Redfish
[Documentation] Verify set time using redfish API.
[Tags] Verify_Set_Time_Using_Redfish
Set Time To Manual Mode
${old_bmc_time}= CLI Get BMC DateTime
# Add 3 days to current date.
${new_bmc_time}= Add Time to Date ${old_bmc_time} 3 Days
Redfish Set DateTime ${new_bmc_time}
${cli_bmc_time}= CLI Get BMC DateTime
${time_diff}= Subtract Date From Date ${cli_bmc_time}
... ${new_bmc_time}
${time_diff}= Evaluate abs(${time_diff})
Rprint Vars old_bmc_time new_bmc_time cli_bmc_time time_diff max_time_diff_in_seconds
Should Be True ${time_diff} < ${max_time_diff_in_seconds}
... The difference between Redfish time and CLI time exceeds the allowed time difference.
# Setting back to old bmc time.
Redfish Set DateTime ${old_bmc_time}
Verify Set DateTime With Offset Using Redfish
[Documentation] Verify set DateTime with offset using redfish API.
[Tags] Verify_Set_DateTime_With_Offset_Using_Redfish
[Teardown] Run Keywords Redfish Set DateTime AND FFDC On Test Case Fail
Redfish Set DateTime ${date_time_with_offset}
${cli_bmc_time}= CLI Get BMC DateTime
${date_time_diff}= Subtract Date From Date ${cli_bmc_time}
... ${expected_date_time} exclude_millis=yes
${date_time_diff}= Convert to Integer ${date_time_diff}
Rprint Vars date_time_with_offset expected_date_time cli_bmc_time
... date_time_diff max_time_diff_in_seconds
Valid Range date_time_diff 0 ${max_time_diff_in_seconds}
Verify Set DateTime With Invalid Data Using Redfish
[Documentation] Verify error while setting invalid DateTime using Redfish.
[Tags] Verify_Set_DateTime_With_Invalid_Data_Using_Redfish
Redfish Set DateTime ${invalid_datetime} valid_status_codes=[${HTTP_BAD_REQUEST}]
Verify DateTime Persists After Reboot
[Documentation] Verify date persists after BMC reboot.
[Tags] Verify_DateTime_Persists_After_Reboot
# Synchronize BMC date/time to local system date/time.
${local_system_time}= Get Current Date
Redfish Set DateTime ${local_system_time}
Redfish OBMC Reboot (off)
Redfish.Login
${bmc_time}= CLI Get BMC DateTime
${local_system_time}= Get Current Date
${time_diff}= Subtract Date From Date ${bmc_time}
... ${local_system_time}
${time_diff}= Evaluate abs(${time_diff})
Rprint Vars local_system_time bmc_time time_diff max_time_diff_in_seconds
Should Be True ${time_diff} < ${max_time_diff_in_seconds}
... The difference between Redfish time and CLI time exceeds the allowed time difference.
Verify NTP Server Set
[Documentation] Patch NTP servers and verify NTP servers is set.
[Tags] Verify_NTP_Server_Set
[Setup] Set NTP state ${True}
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI}
... body={'NTP':{'NTPServers': ['${ntp_server_1}', '${ntp_server_2}']}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
# NTP network take few seconds to reload.
Wait Until Keyword Succeeds 30 sec 10 sec Verify NTP Servers Are Populated
Verify NTP Server Value Not Duplicated
[Documentation] Verify NTP servers value not same for both primary and secondary server.
[Tags] Verify_NTP_Server_Value_Not_Duplicated
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI}
... body={'NTP':{'NTPServers': ['${ntp_server_1}', '${ntp_server_1}']}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
${network_protocol}= Redfish.Get Properties ${REDFISH_NW_PROTOCOL_URI}
Should Contain X Times ${network_protocol["NTP"]["NTPServers"]} ${ntp_server_1} 1
... msg=NTP primary and secondary server values should not be same.
Verify NTP Server Setting Persist After BMC Reboot
[Documentation] Verify NTP server setting persist after BMC reboot.
[Tags] Verify_NTP_Server_Setting_Persist_After_BMC_Reboot
[Setup] Set NTP state ${True}
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI}
... body={'NTP':{'NTPServers': ['${ntp_server_1}', '${ntp_server_2}']}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Redfish OBMC Reboot (off)
Redfish.Login
# NTP network take few seconds to reload.
Wait Until Keyword Succeeds 30 sec 10 sec Verify NTP Servers Are Populated
Verify Enable NTP
[Documentation] Verify NTP protocol mode can be enabled.
[Teardown] Restore NTP Mode
[Tags] Verify_Enable_NTP
${original_ntp}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} NTP
Set Suite Variable ${original_ntp}
Rprint Vars original_ntp
# The following patch command should set the ["NTP"]["ProtocolEnabled"] property to "True".
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI} body={'NTP':{'ProtocolEnabled': ${True}}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Wait Until Keyword Succeeds 1 min 5 sec
... Verify System Time Sync Status ${True}
${ntp}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} NTP
Rprint Vars ntp
Valid Value ntp["ProtocolEnabled"] valid_values=[True]
Verify Immediate Consumption Of BMC Date
[Documentation] Verify immediate change in BMC date time.
[Tags] Verify_Immediate_Consumption_Of_BMC_Date
[Setup] Run Keywords Set Time To Manual Mode AND
... Redfish Set DateTime valid_status_codes=[${HTTP_OK}]
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Redfish Set DateTime valid_status_codes=[${HTTP_OK}]
[Template] Set BMC Date And Verify
# host_state
on
off
Verify Set DateTime With NTP Enabled
[Documentation] Verify whether set managers dateTime is restricted with NTP enabled.
[Tags] Verify_Set_DateTime_With_NTP_Enabled
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI} body={'NTP':{'ProtocolEnabled': ${True}}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
${ntp}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} NTP
Valid Value ntp["ProtocolEnabled"] valid_values=[True]
${local_system_time}= Get Current Date
Redfish Set DateTime ${local_system_time}
... valid_status_codes=[${HTTP_BAD_REQUEST}, ${HTTP_INTERNAL_SERVER_ERROR}]
*** Keywords ***
Test Teardown Execution
[Documentation] Do the post test teardown.
FFDC On Test Case Fail
Redfish Get DateTime
[Documentation] Returns BMC Datetime value from Redfish.
${date_time}= Redfish.Get Attribute ${REDFISH_BASE_URI}Managers/bmc DateTime
[Return] ${date_time}
Redfish Set DateTime
[Documentation] Set DateTime using Redfish.
[Arguments] ${date_time}=${EMPTY} &{kwargs}
# Description of argument(s):
# date_time New time to set for BMC (eg.
# "2019-06-30 09:21:28"). If this value is
# empty, it will be set to the UTC current
# date time of the local system.
# kwargs Additional parameters to be passed directly to
# th Redfish.Patch function. A good use for
# this is when testing a bad date-time, the
# caller can specify
# valid_status_codes=[${HTTP_BAD_REQUEST}].
# Assign default value of UTC current date time if date_time is empty.
${date_time}= Run Keyword If
... '${date_time}' == '${EMPTY}' Get Current Date time_zone=UTC
... ELSE
... Set Variable ${date_time}
Wait Until Keyword Succeeds 1min 5sec
... Redfish.Patch ${REDFISH_BASE_URI}Managers/bmc body={'DateTime': '${date_time}'} &{kwargs}
Set Time To Manual Mode
[Documentation] Set date time to manual mode via Redfish.
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI} body={'NTP':{'ProtocolEnabled': ${False}}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Restore NTP Mode
[Documentation] Restore the original NTP mode.
Return From Keyword If &{original_ntp} == &{EMPTY}
Print Timen Restore NTP Mode.
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI}
... body={'NTP':{'ProtocolEnabled': ${original_ntp["ProtocolEnabled"]}}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Suite Setup Execution
[Documentation] Do the suite level setup.
Printn
Redfish.Login
Get NTP Initial Status
Set Time To Manual Mode
Suite Teardown Execution
[Documentation] Do the suite level teardown.
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI}
... body={'NTP':{'NTPServers': ['${EMPTY}', '${EMPTY}']}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Set Time To Manual Mode
Restore NTP Status
Redfish.Logout
Set NTP state
[Documentation] Set NTP service inactive.
[Arguments] ${state}
Redfish.Patch ${REDFISH_NW_PROTOCOL_URI} body={'NTP':{'ProtocolEnabled': ${state}}}
... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Get NTP Initial Status
[Documentation] Get NTP service Status.
${original_ntp}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} NTP
Set Suite Variable ${original_ntp}
Restore NTP Status
[Documentation] Restore NTP Status.
Run Keyword If '${original_ntp["ProtocolEnabled"]}' == 'True'
... Set NTP state ${TRUE}
... ELSE Set NTP state ${FALSE}
Set BMC Date And Verify
[Documentation] Set BMC Date Time at a given host state and verify.
[Arguments] ${host_state}
# Description of argument(s):
# host_state Host state at which date time will be updated for verification
# (eg. on, off).
Run Keyword If '${host_state}' == 'on'
... Redfish Power On stack_mode=skip
... ELSE
... Redfish Power off stack_mode=skip
${current_date}= Get Current Date time_zone=UTC
${new_value}= Subtract Time From Date ${current_date} 1 day
Redfish Set DateTime ${new_value} valid_status_codes=[${HTTP_OK}]
${current_value}= Redfish Get DateTime
${time_diff}= Subtract Date From Date ${current_value} ${new_value}
Should Be True '${time_diff}'<='3'
Verify NTP Servers Are Populated
[Documentation] Redfish GET request /redfish/v1/Managers/bmc/NetworkProtocol response
... and verify if NTP servers are populated.
${network_protocol}= Redfish.Get Properties ${REDFISH_NW_PROTOCOL_URI}
Should Contain ${network_protocol["NTP"]["NTPServers"]} ${ntp_server_1}
... msg=NTP server value ${ntp_server_1} not stored.
Should Contain ${network_protocol["NTP"]["NTPServers"]} ${ntp_server_2}
... msg=NTP server value ${ntp_server_2} not stored.
Verify System Time Sync Status
[Documentation] Verify the status of service systemd-timesyncd matches the NTP protocol enabled state.
[Arguments] ${expected_sync_status}=${True}
# Description of argument(s):
# expected_sync_status expected status at which NTP protocol enabled will be updated for verification
# (eg. True, False).
${resp}= BMC Execute Command
... systemctl status systemd-timesyncd
... ignore_err=${1}
${sync_status}= Get Lines Matching Regexp ${resp[0]} .*Active.*
Run Keyword If ${expected_sync_status}==${True}
... Should Contain ${sync_status} active (running)
Run Keyword If ${expected_sync_status}==${False}
... Should Contain ${sync_status} inactive (dead)