| *** Settings *** |
| |
| Documentation VMI static/dynamic IP config tests. |
| |
| Resource ../../lib/external_intf/vmi_utils.robot |
| |
| Suite Setup Suite Setup Execution |
| Test Teardown FFDC On Test Case Fail |
| Suite Teardown Run Keyword And Ignore Error Suite Teardown Execution |
| |
| Force Tags vmi_interface_test |
| |
| *** Variables *** |
| |
| # users User Name password |
| @{ADMIN} admin_user TestPwd123 |
| @{OPERATOR} operator_user TestPwd123 |
| @{ReadOnly} readonly_user TestPwd123 |
| &{USERS} Administrator=${ADMIN} ReadOnly=${ReadOnly} |
| |
| ${test_ipv4} 10.6.6.6 |
| ${test_gateway} 10.6.6.1 |
| ${test_netmask} 255.255.252.0 |
| |
| &{DHCP_ENABLED} DHCPEnabled=${${True}} |
| &{DHCP_DISABLED} DHCPEnabled=${${False}} |
| |
| &{ENABLE_DHCP} DHCPv4=&{DHCP_ENABLED} |
| &{DISABLE_DHCP} DHCPv4=&{DHCP_DISABLED} |
| ${wait_time} 10s |
| |
| |
| *** Test Cases *** |
| |
| Verify All VMI EthernetInterfaces |
| [Documentation] Verify all VMI ethernet interfaces. |
| [Tags] Verify_All_VMI_EthernetInterfaces |
| |
| Verify VMI EthernetInterfaces |
| |
| |
| Verify Existing VMI Network Interface Details |
| [Documentation] Verify existing VMI network interface details. |
| [Tags] Verify_Existing_VMI_Network_Interface_Details |
| |
| ${vmi_ip}= Get VMI Network Interface Details |
| ${origin}= Set Variable If ${vmi_ip["DHCPv4"]} == ${False} Static DHCP |
| Should Not Be Equal ${vmi_ip["DHCPv4"]} ${vmi_ip["IPv4StaticAddresses"]} |
| Should Be Equal As Strings ${vmi_ip["Id"]} ${ethernet_interface} |
| Should Be Equal As Strings ${vmi_ip["Description"]} |
| ... Hypervisor's Virtual Management Ethernet Interface |
| Should Be Equal As Strings ${vmi_ip["Name"]} Hypervisor Ethernet Interface |
| Should Be True ${vmi_ip["InterfaceEnabled"]} |
| Run Keyword If ${vmi_ip["IPv4StaticAddresses"]} != @{empty} |
| ... Verify VMI Network Interface Details ${vmi_ip["IPv4_Address"]} |
| ... ${origin} ${vmi_ip["IPv4_Gateway"]} ${vmi_ip["IPv4_SubnetMask"]} |
| |
| |
| Delete Existing Static VMI IP Address |
| [Documentation] Delete existing static VMI IP address. |
| [Tags] Delete_Existing_Static_VMI_IP_Address |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} |
| |
| Delete VMI IPv4 Address |
| |
| |
| Verify User Cannot Delete ReadOnly Property IPv4Addresses |
| [Documentation] Verify user cannot delete readonly property IPv4Addresses. |
| [Tags] Verify_User_Cannot_Delete_ReadOnly_Property_IPv4Addresses |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${True} Set VMI IPv4 Origin ${False} ${HTTP_ACCEPTED} |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_FORBIDDEN} |
| |
| |
| Assign Valid And Invalid Static IPv4 Address To VMI |
| [Documentation] Assign static IPv4 address to VMI. |
| [Tags] Assign_Valid_And_Invalid_Static_IPv4_Address_To_VMI |
| [Template] Set Static IPv4 Address To VMI And Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| # ip gateway netmask valid_status_code |
| 10.5.20.30 10.5.20.1 255.255.252.0 ${HTTP_ACCEPTED} |
| a.3.118.94 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} |
| 10.5.20 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} |
| 10.5.20.-5 10.5.20.1 255.255.252.0 ${HTTP_BAD_REQUEST} |
| |
| |
| Add Multiple IP Addresses On VMI Interface And Verify |
| [Documentation] Add multiple IP addresses on VMI interface and verify. |
| [Tags] Add_Multiple_IP_Addresses_On_VMI_Interface_And_Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| ${ip1}= Create dictionary Address=10.5.5.10 SubnetMask=255.255.252.0 Gateway=10.5.5.1 |
| ${ip2}= Create dictionary Address=10.5.5.11 SubnetMask=255.255.252.0 Gateway=10.5.5.1 |
| ${ip3}= Create dictionary Address=10.5.5.12 SubnetMask=255.255.252.0 Gateway=10.5.5.1 |
| ${ips}= Create List ${ip1} ${ip2} ${ip3} |
| |
| Redfish.Patch /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} |
| ... body={'IPv4StaticAddresses':${ips}} valid_status_codes=[${HTTP_BAD_REQUEST}] |
| |
| |
| Modify IP Addresses On VMI Interface And Verify |
| [Documentation] Modify IP addresses on VMI interface and verify. |
| [Tags] Modify_IP_Addresses_On_VMI_Interface_And_Verify |
| [Template] Set Static IPv4 Address To VMI And Verify |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| # ip gateway netmask valid_status_code |
| 10.5.5.10 10.5.5.1 255.255.252.0 ${HTTP_ACCEPTED} |
| 10.5.5.11 10.5.5.1 255.255.252.0 ${HTTP_ACCEPTED} |
| |
| |
| Switch Between IP Origins On VMI And Verify Details |
| [Documentation] Switch between IP origins on VMI and verify details. |
| [Tags] Switch_Between_IP_Origins_On_VMI_And_Verify_Details |
| |
| Switch VMI IPv4 Origin And Verify Details |
| Switch VMI IPv4 Origin And Verify Details |
| |
| |
| Verify Persistency Of VMI IPv4 Details After Host Reboot |
| [Documentation] Verify persistency of VMI IPv4 details after host reboot. |
| [Tags] Verify_Persistency_Of_VMI_IPv4_Details_After_Host_Reboot |
| |
| # Verifying persistency of dynamic address. |
| Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| Redfish Power Off stack_mode=skip |
| Redfish Power On |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| |
| # Verifying persistency of static address. |
| Switch VMI IPv4 Origin And Verify Details |
| Redfish Power Off stack_mode=skip |
| Redfish Power On |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| |
| |
| Delete VMI Static IP Address And Verify |
| [Documentation] Delete VMI static IP address and verify. |
| [Tags] Delete_VMI_Static_IP_Address_And_Verify |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Delete VMI IPv4 Address |
| |
| |
| Verify Successful VMI IP Static Configuration On HOST Boot After Session Delete |
| [Documentation] Verify VMI IP static Configuration On HOST Boot After session deleted. |
| [Tags] Verify_Successful_VMI_IP_Static_Configuration_On_HOST_Boot_After_Session_Delete |
| [Teardown] Run keywords Delete VMI IPv4 Address AND Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| |
| ${session_info}= Get Redfish Session Info |
| Redfish.Delete ${session_info["location"]} |
| |
| # Create a new Redfish session |
| Redfish.Login |
| Redfish Power Off |
| Redfish Power On |
| |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| |
| Verify Persistency Of VMI DHCP IP Configuration After Multiple HOST Reboots |
| [Documentation] Verify Persistency Of VMI DHCP IP configuration After Multiple HOST Reboots |
| [Tags] Verify_Persistency_Of_VMI_DHCP_IP_Configuration_After_Multiple_HOST_Reboots |
| [Teardown] Test Teardown Execution |
| |
| Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${vmi_ip_config}= Get VMI Network Interface Details |
| # Verifying persistency of dynamic address after multiple reboots. |
| FOR ${i} IN RANGE ${2} |
| Redfish Power Off |
| Redfish Power On |
| Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} |
| ... DHCP ${vmi_ip_config["IPv4_Gateway"]} ${vmi_ip_config["IPv4_SubnetMask"]} |
| END |
| |
| |
| Enable DHCP When Static IP Configured And Verify Static IP |
| [Documentation] Enable DHCP when static ip configured and verify static ip |
| [Tags] Enable_DHCP_When_Static_IP_Configured_And_Verify_Static_IP |
| [Setup] Redfish Power On |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Set VMI IPv4 Origin ${True} |
| ${vmi_network_conf}= Get VMI Network Interface Details |
| Should Not Be Equal As Strings ${test_ipv4} ${vmi_network_conf["IPv4_Address"]} |
| |
| |
| Verify VMI Static IP Configuration Persist On BMC Reset Before Host Boot |
| [Documentation] Verify VMI static IP configuration persist on BMC reset. |
| [Tags] Verify_VMI_Static_IP_Configuration_Persist_On_BMC_Reset_Before_Host_Boot |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish Power On |
| # Verifying the VMI static configuration |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| |
| Add Static IP When Host Poweroff And Verify On Poweron |
| [Documentation] Add Static IP When Host Poweroff And Verify on power on |
| [Tags] Add_Static_IP_When_Host_Poweroff_And_Verify_On_Poweron |
| [Setup] Redfish Power Off |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Redfish Power On |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| |
| Add VMI Static IP When Host Poweroff And Verify Static IP On BMC Reset |
| [Documentation] Add Static IP When Host Poweroff And Verify Static IP On BMC Reset. |
| [Tags] Add_VMI_Static_IP_When_Host_Poweroff_And_Verify_Static_IP_On_BMC_Reset |
| [Setup] Redfish Power Off |
| [Teardown] Run keywords Delete VMI IPv4 Address AND FFDC On Test Case Fail |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Redfish OBMC Reboot (off) stack_mode=skip |
| Redfish Power On |
| Verify VMI Network Interface Details ${test_ipv4} Static ${test_gateway} ${test_netmask} |
| |
| |
| Enable DHCP When No Static IP Configured And Verify DHCP IP |
| [Documentation] Enable DHCP when no static ip configured and verify dhcp ip |
| [Tags] Enable_DHCP_When_No_Static_IP_Configured_And_Verify_DHCP_IP |
| [Setup] Run Keyword And Ignore Error Delete VMI IPv4 Address |
| [Teardown] Test Teardown Execution |
| |
| ${curr_origin}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_origin} == ${False} Set VMI IPv4 Origin ${True} ${HTTP_ACCEPTED} |
| ${vmi_ip_config}= Get VMI Network Interface Details |
| Verify VMI Network Interface Details ${vmi_ip_config["IPv4_Address"]} |
| ... DHCP ${vmi_ip_config["IPv4_Gateway"]} ${vmi_ip_config["IPv4_SubnetMask"]} |
| |
| |
| Verify User Cannot Delete VMI DHCP IP Address |
| [Documentation] Verify user cannot delete VMI DHCP IP Address |
| [Tags] Verify_User_Cannot_Delete_VMI_DHCP_IP_Address |
| [Setup] Set VMI IPv4 Origin ${True} |
| [Teardown] Test Teardown Execution |
| |
| Delete VMI IPv4 Address IPv4Addresses valid_status_code=${HTTP_FORBIDDEN} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} |
| Should Not Be Empty ${resp.dict["IPv4Addresses"]} |
| |
| |
| Enable DHCP When Static IP Configured DHCP Server Unavailable And Verify IP |
| [Documentation] Enable DHCP When Static IP Configured And DHCP Server Unavailable And Verify No IP. |
| [Tags] Enable_DHCP_When_Static_IP_Configured_DHCP_Server_Unavailable_And_Verify_IP |
| [Teardown] Test Teardown Execution |
| |
| Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} ${test_netmask} |
| Set VMI IPv4 Origin ${True} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| |
| |
| Verify To Configure VMI Static IP Address With Different User Roles |
| [Documentation] Verify to configure vmi static ip address with different user roles. |
| [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway nemask valid_status_code |
| admin_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_ACCEPTED} |
| readonly_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Configure VMI Static IP Address With Operator User Role |
| [Documentation] Verify to configure vmi static ip address with operator user role. |
| [Tags] Verify_To_Configure_VMI_Static_IP_Address_With_Operator_User_Role |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway nemask valid_status_code |
| operator_user TestPwd123 ${test_ipv4} ${test_gateway} ${test_netmask} ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Delete VMI Static IP Address With Different User Roles |
| [Documentation] Verify to delete vmi static IP address with different user roles. |
| [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Delete VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| admin_user TestPwd123 ${HTTP_ACCEPTED} |
| readonly_user TestPwd123 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Delete VMI Static IP Address With Operator User Role |
| [Documentation] Verify to delete vmi static IP address with operator user role. |
| [Tags] Verify_To_Delete_VMI_Static_IP_Address_With_Operator_User_Role |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Delete VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| operator_user TestPwd123 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Update VMI Static IP Address With Different User Roles |
| [Documentation] Verify to update vmi static IP address with different user roles. |
| [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway netmask valid_status_code |
| admin_user TestPwd123 10.5.10.20 10.5.10.1 255.255.0.0 ${HTTP_ACCEPTED} |
| readonly_user TestPwd123 10.5.20.40 10.5.20.1 255.255.0.0 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Update VMI Static IP Address With Operator User Role |
| [Documentation] Verify to update vmi static IP address with operator user role. |
| [Tags] Verify_To_Update_VMI_Static_IP_Address_With_Operator_User_Role |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Config VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password ip_address gateway netmask valid_status_code |
| operator_user TestPwd123 10.5.10.30 10.5.10.1 255.255.0.0 ${HTTP_FORBIDDEN} |
| |
| |
| Verify To Read VMI Network Configuration With Different User Roles |
| [Documentation] Verify to read vmi network configuration with different user roles. |
| [Tags] Verify_To_Read_VMI_Network_Configuration_With_Different_User_Roles |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Read VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| admin_user TestPwd123 ${HTTP_OK} |
| readonly_user TestPwd123 ${HTTP_OK} |
| |
| |
| Verify To Read VMI Network Configuration With Operator User Role |
| [Documentation] Verify to read vmi network configuration with operator user role. |
| [Tags] Verify_To_Read_VMI_Network_Configuration_With_Operator_User_Role |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Read VMI Static IP Address Using Different Users |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password valid_status_code |
| operator_user TestPwd123 ${HTTP_FORBIDDEN} |
| |
| |
| Enable DHCP On VMI Network Via Different Users Roles And Verify |
| [Documentation] Enable DHCP On VMI Network Via Different Users Roles And Verify. |
| [Tags] Enable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| admin_user TestPwd123 ${True} ${HTTP_ACCEPTED} |
| readonly_user TestPwd123 ${True} ${HTTP_FORBIDDEN} |
| |
| |
| Enable DHCP On VMI Network Via Operator User Role And Verify |
| [Documentation] Enable DHCP On VMI Network Via Operator User Role And Verify. |
| [Tags] Enable_DHCP_On_VMI_Network_Via_Operator_User_Role_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| operator_user TestPwd123 ${True} ${HTTP_FORBIDDEN} |
| |
| |
| Disable DHCP On VMI Network Via Different Users Roles And Verify |
| [Documentation] Disable DHCP On VMI Network Via Different Users Roles And Verify. |
| [Tags] Disable_DHCP_On_VMI_Network_Via_Different_Users_Roles_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| admin_user TestPwd123 ${False} ${HTTP_ACCEPTED} |
| readonly_user TestPwd123 ${False} ${HTTP_FORBIDDEN} |
| |
| |
| Disable DHCP On VMI Network Via Operator User Role And Verify |
| [Documentation] Disable DHCP On VMI Network Via Operator User Role And Verify. |
| [Tags] Disable_DHCP_On_VMI_Network_Via_Operator_User_Role_And_Verify |
| [Setup] Create Users With Different Roles users=${USERS} force=${True} |
| [Template] Update User Role And Set VMI IPv4 Origin |
| [Teardown] Delete BMC Users Using Redfish |
| |
| # username password dhcp_enabled valid_status_code |
| operator_user TestPwd123 ${False} ${HTTP_FORBIDDEN} |
| |
| |
| Enable And Disable DHCP And Verify |
| [Documentation] verify enable DHCP and disable DHCP. |
| [Tags] Enable_And_Disable_DHCP_And_Verify |
| |
| Set VMI IPv4 Origin ${True} |
| ${default}= Set Variable 0.0.0.0 |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| Set VMI IPv4 Origin ${False} |
| Verify VMI Network Interface Details ${default} Static ${default} ${default} |
| |
| |
| Multiple Times Enable And Disable DHCP And Verify |
| [Documentation] Enable and Disable DHCP in a loop and verify VMI gets an IP address from DHCP |
| ... each time when DHCP is enabled |
| [Tags] Multiple_Times_Enable_And_Disable_DHCP_And_Verify |
| |
| ${default}= Set Variable 0.0.0.0 |
| FOR ${i} IN RANGE ${2} |
| Set VMI IPv4 Origin ${True} |
| Verify VMI Network Interface Details ${default} DHCP ${default} ${default} |
| Set VMI IPv4 Origin ${False} |
| Verify VMI Network Interface Details ${default} Static ${default} ${default} |
| END |
| |
| |
| Assign Static IPv4 Address With Invalid Netmask To VMI |
| [Documentation] Assign static IPv4 address with invalid netmask and expect error. |
| [Tags] Assign_Static_IPv4_Address_With_Invalid_Netmask_To_VMI |
| [Template] Set Static IPv4 Address To VMI And Verify |
| |
| # ip gateway netmask valid_status_code |
| ${test_ipv4} ${test_gateway} 255.256.255.0 ${HTTP_BAD_REQUEST} |
| ${test_ipv4} ${test_gateway} ff.ff.ff.ff ${HTTP_BAD_REQUEST} |
| ${test_ipv4} ${test_gateway} 255.255.253.0 ${HTTP_BAD_REQUEST} |
| |
| |
| Assign Static IPv4 Address With Invalid Gateway To VMI |
| [Documentation] Add static IPv4 address with invalid gateway and expect error. |
| [Tags] Assign_Static_IPv4_Address_With_Invalid_Gateway_To_VMI |
| [Template] Set Static IPv4 Address To VMI And Verify |
| |
| # ip gateway netmask valid_status_code |
| ${test_ipv4} @@@.%%.44.11 ${test_netmask} ${HTTP_BAD_REQUEST} |
| ${test_ipv4} 0xa.0xb.0xc.0xd ${test_netmask} ${HTTP_BAD_REQUEST} |
| ${test_ipv4} 10.3.36 ${test_netmask} ${HTTP_BAD_REQUEST} |
| ${test_ipv4} 10.3.36.-10 ${test_netmask} ${HTTP_BAD_REQUEST} |
| |
| |
| *** Keywords *** |
| |
| Suite Setup Execution |
| [Documentation] Do test setup execution task. |
| |
| Redfish.Login |
| Redfish Power On |
| ${active_channel_config}= Get Active Channel Config |
| Set Suite Variable ${active_channel_config} |
| Set Suite Variable ${ethernet_interface} ${active_channel_config['${CHANNEL_NUMBER}']['name']} |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} |
| ${ip_resp}= Evaluate json.loads(r'''${resp.text}''') json |
| ${length}= Get Length ${ip_resp["IPv4StaticAddresses"]} |
| ${vmi_network_conf}= Run Keyword If ${length} != ${0} Get VMI Network Interface Details |
| Set Suite Variable ${vmi_network_conf} |
| |
| |
| Test Teardown Execution |
| [Documentation] Do test teardown execution task. |
| |
| FFDC On Test Case Fail |
| ${curr_mode}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Run Keyword If ${curr_mode} == ${True} Set VMI IPv4 Origin ${False} |
| Run Keyword If ${vmi_network_conf} != ${None} |
| ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} |
| ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} |
| |
| |
| Get Immediate Child Parameter From VMI Network Interface |
| [Documentation] Get immediate child parameter from VMI network interface. |
| [Arguments] ${parameter} ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # parameter parameter for which value is required. Ex: DHCPEnabled, MACAddress etc. |
| # valid_status_code Expected valid status code from GET request. |
| |
| ${resp}= Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${ip_resp}= Evaluate json.loads(r'''${resp.text}''') json |
| ${value}= Set Variable If '${parameter}' != 'DHCPEnabled' ${ip_resp["${parameter}"]} |
| ... ${ip_resp["DHCPv4"]["${parameter}"]} |
| |
| [Return] ${value} |
| |
| |
| Switch VMI IPv4 Origin And Verify Details |
| [Documentation] Switch VMI IPv4 origin and verify details. |
| |
| ${dhcp_mode_before}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| ${dhcp_enabled}= Set Variable If ${dhcp_mode_before} == ${False} ${True} ${False} |
| |
| ${default}= Set Variable 0.0.0.0 |
| ${origin}= Set Variable If ${dhcp_mode_before} == ${False} DHCP Static |
| Set VMI IPv4 Origin ${dhcp_enabled} ${HTTP_ACCEPTED} |
| |
| ${dhcp_mode_after}= Get Immediate Child Parameter From VMI Network Interface DHCPEnabled |
| Should Not Be Equal ${dhcp_mode_before} ${dhcp_mode_after} |
| |
| Run Keyword If ${dhcp_mode_after} == ${True} |
| ... Verify VMI Network Interface Details ${default} ${origin} ${default} ${default} |
| |
| |
| Delete VMI Static IP Address Using Different Users |
| [Documentation] Update user role and delete vmi static IP address. |
| [Arguments] ${username} ${password} ${valid_status_code} |
| [Teardown] Run Keywords Redfish.Login AND |
| ... Set Static IPv4 Address To VMI And Verify ${test_ipv4} ${test_gateway} |
| ... ${test_netmask} ${HTTP_ACCEPTED} AND Redfish.Logout |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # valid_status_code The expected valid status code. |
| |
| # TODO: operator_user role is not yet supported. |
| Skip If '${username}' == 'operator_user' |
| Redfish.Login ${username} ${password} |
| Delete VMI IPv4 Address delete_param=IPv4StaticAddresses valid_status_code=${valid_status_code} |
| |
| |
| Config VMI Static IP Address Using Different Users |
| [Documentation] Update user role and update vmi static ip address. |
| [Arguments] ${username} ${password} ${ip} ${gateway} ${netmask} |
| ... ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # ip IP address to be added (e.g. "10.7.7.7"). |
| # subnet_mask Subnet mask for the IP to be added |
| # (e.g. "255.255.0.0"). |
| # gateway Gateway for the IP to be added (e.g. "10.7.7.1"). |
| # valid_status_code The expected valid status code. |
| |
| # TODO: operator_user role is not yet supported. |
| Skip If '${username}' == 'operator_user' |
| Redfish.Login ${username} ${password} |
| Set Static IPv4 Address To VMI And Verify ${ip} ${gateway} ${netmask} ${valid_status_code} |
| |
| |
| Read VMI Static IP Address Using Different Users |
| [Documentation] Update user role and read vmi static ip address. |
| [Arguments] ${username} ${password} ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # valid_status_code The expected valid status code. |
| |
| # TODO: operator_user role is not yet supported. |
| Skip If '${username}' == 'operator_user' |
| Redfish.Login ${username} ${password} |
| Redfish.Get |
| ... /redfish/v1/Systems/hypervisor/EthernetInterfaces/${ethernet_interface} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| |
| Delete BMC Users Using Redfish |
| [Documentation] Delete BMC users via redfish. |
| |
| Redfish.Login |
| Delete BMC Users Via Redfish users=${USERS} |
| |
| |
| Update User Role And Set VMI IPv4 Origin |
| [Documentation] Update User Role And Set VMI IPv4 Origin. |
| [Arguments] ${username} ${password} ${dhcp_enabled} ${valid_status_code} |
| |
| # Description of argument(s): |
| # username The host username. |
| # password The host password. |
| # dhcp_enabled Indicates whether dhcp should be enabled |
| # (${True}, ${False}). |
| # valid_status_code The expected valid status code. |
| |
| # TODO: operator_user role is not yet supported. |
| Skip If '${username}' == 'operator_user' |
| Redfish.Login ${username} ${password} |
| Set VMI IPv4 Origin ${dhcp_enabled} ${valid_status_code} |
| |
| |
| Suite Teardown Execution |
| [Documentation] Do suite teardown execution task. |
| |
| Run Keyword If ${vmi_network_conf} != ${None} |
| ... Set Static IPv4 Address To VMI And Verify ${vmi_network_conf["IPv4_Address"]} |
| ... ${vmi_network_conf["IPv4_Gateway"]} ${vmi_network_conf["IPv4_SubnetMask"]} |
| Delete All Redfish Sessions |
| Redfish.Logout |