blob: 6c738e2edfe38826113eb0f12206b6841fada39e [file] [log] [blame]
*** Settings ***
Documentation Network interface and functionalities test module on BMC.
Resource ../lib/ipmi_client.robot
Resource ../lib/rest_client.robot
Resource ../lib/utils.robot
Resource ../lib/bmc_network_utils.robot
Resource ../lib/openbmc_ffdc.robot
Force Tags Network_Test
Library String
Library SSHLibrary
Test Setup Test Setup Execution
Test Teardown Test Teardown Execution
*** Variables ***
${alpha_ip} xx.xx.xx.xx
# 10.x.x.x series is a private IP address range and does not exist in
# our network, so this is chosen to avoid IP conflict.
${valid_ip} 10.6.6.6
${valid_ip2} 10.6.6.7
@{valid_ips} ${valid_ip} ${valid_ip2}
${valid_gateway} 10.6.6.1
${valid_prefix_len} ${24}
${broadcast_ip} 10.6.6.255
${loopback_ip} 127.0.0.1
${multicast_ip} 224.6.6.255
${out_of_range_ip} 10.6.6.256
# There will be 4 octets in IP address (e.g. xx.xx.xx.xx)
# but trying to configure xx.xx.xx
${less_octet_ip} 10.3.36
# For the address 10.6.6.6, the 10.6.6.0 portion describes the
# network ID and the 6 describe the host.
${network_id} 10.6.6.0
${hex_ip} 0xa.0xb.0xc.0xd
${negative_ip} 10.-6.-6.6
*** Test Cases ***
Get BMC IPv4 Address And Verify
[Documentation] Get BMC IPv4 address and verify.
[Tags] Get_BMC_IPv4_Address_And_Verify
:FOR ${ipv4_uri} IN @{IPv4_URI_List}
\ ${ipv4_addr}= Read Attribute ${ipv4_uri} Address
\ Validate IP on BMC ${ipv4_addr}
Verify IPv4 Prefix Length
[Documentation] Get prefix length and verify.
[Tags] Verify_IPv4_Prefix_Length
:FOR ${ipv4_uri} IN @{IPv4_URI_List}
\ ${prefix_length}= Read Attribute ${ipv4_uri} PrefixLength
\ Validate Prefix Length On BMC ${prefix_length}
Verify Gateway Address
[Documentation] Get gateway address and verify.
[Tags] Verify_Gateway_Address
:FOR ${ipv4_uri} IN @{IPv4_URI_List}
\ ${gateway_ip}= Read Attribute ${ipv4_uri} Gateway
\ Validate Route On BMC ${gateway_ip}
Verify MAC Address
[Documentation] Get MAC address and verify.
[Tags] Verify_MAC_Address
${macaddr}= Read Attribute ${NETWORK_MANAGER}eth0 MACAddress
Validate MAC On BMC ${macaddr}
Add New Valid IP And Verify
[Documentation] Add new IP address and verify.
[Tags] Add_New_Valid_IP_And_Verify
Configure Network Settings ${valid_ip} ${valid_prefix_len}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete ${valid_ip}
Configure Invalid IP String
[Documentation] Configure invalid IP address which is a string.
[Tags] Configure_Invalid_IP_String
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${alpha_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Out Of Range IP
[Documentation] Configure out-of-range IP address.
[Tags] Configure_Out_Of_Range_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${out_of_range_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Broadcast IP
[Documentation] Configure broadcast IP address.
[Tags] Configure_Broadcast_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${broadcast_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Multicast IP
[Documentation] Configure multicast IP address.
[Tags] Configure_Multicast_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${multicast_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Loopback IP
[Documentation] Configure loopback IP address.
[Tags] Configure_Loopback_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${loopback_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Network ID
[Documentation] Configure network ID IP address.
[Tags] Configure_Network_ID
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${network_id} ${valid_prefix_len} ${valid_gateway} error
Configure Less Octet IP
[Documentation] Configure less octet IP address.
[Tags] Configure_Less_Octet_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${less_octet_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Empty IP
[Documentation] Configure less octet IP address.
[Tags] Configure_Empty_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${EMPTY} ${valid_prefix_len} ${valid_gateway} error
Configure Special Char IP
[Documentation] Configure invalid IP address containing special chars.
[Tags] Configure_Special_Char_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
@@@.%%.44.11 ${valid_prefix_len} ${valid_gateway} error
Configure Hexadecimal IP
[Documentation] Configure invalid IP address containing hex value.
[Tags] Configure_Hexadecimal_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${hex_ip} ${valid_prefix_len} ${valid_gateway} error
Configure Negative Octet IP
[Documentation] Configure invalid IP address containing negative octet.
[Tags] Configure_Negative_Octet_IP
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${negative_ip} ${valid_prefix_len} ${valid_gateway} error
Add New Valid IP With Blank Gateway
[Documentation] Add new IP with blank gateway.
[Tags] Add_New_Valid_IP_With_Blank_Gateway
Configure Network Settings ${valid_ip} ${valid_prefix_len} ${EMPTY}
... valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete ${valid_ip}
Configure Invalid Gateway String
[Documentation] Configure invalid IP address to a gateway which is
... an alpha string and expect an error.
[Tags] Configure_Invalid_Gateway_String
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${alpha_ip} error
Configure Out Of Range IP For Gateway
[Documentation] Configure out-of-range IP for gateway and expect an error.
[Tags] Configure_Out_Of_Range_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${out_of_range_ip} error
Configure Broadcast IP For Gateway
[Documentation] Configure broadcast IP for gateway and expect an error.
[Tags] Configure_Broadcast_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${broadcast_ip} error
Configure Loopback IP For Gateway
[Documentation] Configure loopback IP for gateway and expect an error.
[Tags] Configure_Loopback_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${loopback_ip} error
Configure Multicast IP For Gateway
[Documentation] Configure multicast IP for gateway and expect an error.
[Tags] Configure_Multicast_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${multicast_ip} error
Configure Network ID For Gateway
[Documentation] Configure network ID for gateway and expect an error.
[Tags] Configure_Network_ID_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${network_id} error
Configure Less Octet IP For Gateway
[Documentation] Configure less octet IP for gateway and expect an error.
[Tags] Configure_Less_Octet_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${less_octet_ip} error
Configure Special Char IP For Gateway
[Documentation] Configure special char IP for gateway and expect an error.
[Tags] Configure_Special_Char_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} @@@.%%.44.11 error
Configure Hexadecimal IP For Gateway
[Documentation] Configure hexadecimal IP for gateway and expect an error.
[Tags] Configure_Hexadecimal_IP_For_Gateway
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} ${valid_prefix_len} ${hex_ip} error
Configure Out Of Range Prefix Length
[Documentation] Configure out-of-range prefix length and expect an error.
[Tags] Configure_Out_Of_Range_Prefix_Length
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} 33 ${valid_gateway} error
Configure Negative Value For Prefix Length
[Documentation] Configure negative prefix length and expect an error.
[Tags] Configure_Negative_Value_For_Prefix_Length
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} -10 ${valid_gateway} error
Configure Non Numeric Value For Prefix Length
[Documentation] Configure non numeric value prefix length and expect
... an error.
[Tags] Configure_String_Value_For_Prefix_Length
[Template] Configure Network Settings
# IP Address Prefix_length Gateway_IP Expected_Result
${valid_ip} xx ${valid_gateway} error
Add Fourth Octet Threshold IP And Verify
[Documentation] Add fourth octet threshold IP and verify.
[Tags] Add_Fourth_Octet_Threshold_IP_And_Verify
Configure Network Settings 10.6.6.254 ${valid_prefix_len}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete 10.6.6.254
Add Third Octet Threshold IP And Verify
[Documentation] Add third octet threshold IP and verify.
[Tags] Add_Third_Octet_Threshold_IP_And_Verify
Configure Network Settings 10.6.255.6 ${valid_prefix_len}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete 10.6.255.6
Add Second Octet Threshold IP And Verify
[Documentation] Add second octet threshold IP and verify.
[Tags] Add_Second_Octet_Threshold_IP_And_Verify
Configure Network Settings 10.255.6.6 ${valid_prefix_len}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete 10.255.6.6
Add First Octet Threshold IP And Verify
[Documentation] Add first octet threshold IP and verify.
[Tags] Add_First_Octet_Threshold_IP_And_Verify
Configure Network Settings 223.6.6.6 ${valid_prefix_len}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete 223.6.6.6
Configure Lowest Prefix Length
[Documentation] Configure lowest prefix length.
[Tags] Configure_Lowest_Prefix_Length
Configure Network Settings ${valid_ip} ${1}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete ${valid_ip}
Configure Threshold Prefix Length
[Documentation] Configure threshold prefix length.
[Tags] Configure_Threshold_Prefix_Length
Configure Network Settings ${valid_ip} ${32}
... ${valid_gateway} valid
# Verify whether new IP object is created for the given IP via REST.
# Delete IP address and IP object after verification.
Verify IP Address Via REST And Delete ${valid_ip}
Verify Default Gateway
[Documentation] Verify that the default gateway has a valid route.
[Tags] Verify_Default_Gateway.
${default_gw}= Read Attribute ${NETWORK_MANAGER}config
... DefaultGateway
Validate Route On BMC ${default_gw}
Verify Hostname
[Documentation] Verify that the hostname read via REST is the same as the
... hostname configured on system.
[Tags] Verify_Hostname
${hostname}= Read Attribute ${NETWORK_MANAGER}config HostName
Validate Hostname On BMC ${hostname}
Run IPMI With Multiple IPs Configured
[Documentation] Test out-of-band IPMI command with multiple IPs configured.
[Tags] Run_IPMI_With_Multiple_IPs_Configured
[Teardown] Clear IP Address
# Configure two IPs and verify.
:FOR ${loc_valid_ip} IN @{valid_ips}
\ Configure Network Settings ${loc_valid_ip} ${valid_prefix_len}
\ ... ${valid_gateway} valid
@{ip_uri_list}= Get IPv4 URI List
@{ip_list}= Get List Of IP Address Via REST @{ip_uri_list}
List Should Contain Sub List ${ip_list} ${valid_ips}
... msg=IP address is not configured.
Run IPMI Standard Command chassis bootparam get 5
*** Keywords ***
Clear IP Address
[Documentation] Delete the IPs
# Get the current IPv4 list post delete and sleep 10s for sync.
:FOR ${loc_valid_ip} IN @{valid_ips}
\ @{ip_uri_list}= Get IPv4 URI List
\ Delete IP And Object ${loc_valid_ip} @{ip_uri_list}
\ Sleep 10s
Test Setup Execution
[Documentation] Network setup.
Open Connection And Login
@{IPv4_URI_List}= Get IPv4 URI List
Set Test Variable @{IPv4_URI_List}
# Get BMC IP address and prefix length.
${ip_data}= Get BMC IP Info
Set Test Variable ${ip_data}
Get IPv4 URI List
[Documentation] Get all IPv4 URIs.
# Sample output:
# "data": [
# "/xyz/openbmc_project/network/eth0/ipv4/e9767624",
# "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b"
# ],
@{ipv4_uri_list}= Read Properties ${NETWORK_MANAGER}eth0/ipv4/
Should Not Be Empty ${ipv4_uri_list} msg=IPv4 URI list is empty.
[Return] @{ipv4_uri_list}
Validate IP On BMC
[Documentation] Validate IP on BMC.
[Arguments] ${ip_address} ${ip_info}=${ip_data}
# Description of argument(s):
# ip_address IP address of the system.
# ip_info List of IP address and prefix length values.
Should Contain Match ${ip_info} ${ip_address}/*
... msg=IP address does not exist.
Verify IP Address Via REST And Delete
[Documentation] Verify IP address via REST and delete.
[Arguments] ${ip_addr}
# Description of argument(s):
# ip_addr IP address to be verified.
@{ip_uri_list}= Get IPv4 URI List
@{ip_list}= Get List Of IP Address Via REST @{ip_uri_list}
List Should Contain Value ${ip_list} ${ip_addr}
... msg=IP address is not configured.
# If IP address is configured, delete it.
Delete IP And Object ${ip_addr} @{ip_uri_list}
Validate Prefix Length On BMC
[Documentation] Validate prefix length on BMC.
[Arguments] ${prefix_length}
# Description of argument(s):
# prefix_length It indicates netmask, netmask value 255.255.255.0
# is equal to prefix length 24.
# ip_data Suite variable which has list of IP address and
# prefix length values.
Should Contain Match ${ip_data} */${prefix_length}
... msg=Prefix length does not exist.
Validate Route On BMC
[Documentation] Validate route.
[Arguments] ${gateway_ip}
# Description of argument(s):
# gateway_ip Gateway IP address.
${route_info}= Get BMC Route Info
# If gateway IP is empty or 0.0.0.0 it will not have route entry.
Run Keyword If '${gateway_ip}' == '0.0.0.0'
... Pass Execution Gatway IP is "0.0.0.0".
... ELSE
... Should Contain ${route_info} ${gateway_ip}
... msg=Gateway IP address not matching.
Configure Network Settings
[Documentation] Configure network settings.
[Arguments] ${ip_addr} ${prefix_len} ${gateway_ip} ${expected_result}
# Description of argument(s):
# ip_addr IP address of BMC.
# prefix_len Prefix length.
# gateway_ip Gateway IP address.
# expected_result Expected status of network setting configuration.
@{ip_parm_list}= Create List xyz.openbmc_project.Network.IP.Protocol.IPv4
... ${ip_addr} ${prefix_len} ${gateway_ip}
${data}= Create Dictionary data=@{ip_parm_list}
Run Keyword And Ignore Error OpenBMC Post Request
... ${NETWORK_MANAGER}eth0/action/IP data=${data}
# After any modification on network interface, BMC restarts network
# module, wait until it is reachable. Then wait 15 seconds for new
# configuration to be updated on BMC.
Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
... ${NETWORK_RETRY_TIME}
Sleep 15s
# Verify whether new IP address is populated on BMC system.
# It should not allow to configure invalid settings.
${ip_data}= Get BMC IP Info
${status}= Run Keyword And Return Status
... Validate IP On BMC ${ip_addr} ${ip_data}
Run Keyword If '${expected_result}' == 'error'
... Should Be Equal ${status} ${False}
... msg=Allowing the configuration of an invalid IP.
... ELSE
... Should Be Equal ${status} ${True}
... msg=Not allowing the configuration of a valid IP.
Validate Hostname On BMC
[Documentation] Verify that the hostname read via REST is the same as the
... hostname configured on system.
[Arguments] ${hostname}
# Description of argument(s):
# hostname A hostname value which is to be compared to the hostname
# configured on system.
${sys_hostname}= Get BMC Hostname
Should Be Equal ${sys_hostname} ${hostname}
... ignore_case=True msg=Hostname does not exist.
Test Teardown Execution
[Documentation] Do the post test teardown.
FFDC On Test Case Fail
Close All Connections