| *** Settings *** |
| Documentation REST test Error callout association. |
| |
| Resource ../../../lib/bmc_redfish_resource.robot |
| Resource ../../../lib/bmc_redfish_utils.robot |
| Resource ../../../lib/connection_client.robot |
| Resource ../../../lib/openbmc_ffdc.robot |
| Resource ../../../lib/utils.robot |
| Resource ../../../lib/state_manager.robot |
| Resource ../../../lib/boot_utils.robot |
| |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Suite Teardown Execution |
| Test Setup Test Setup Execution |
| Test Teardown FFDC On Test Case Fail |
| |
| ***Variables*** |
| ${target_device_path} /sys/devices/platform/gpio-fsi/fsi0/slave@00:00/raw |
| |
| ${stack_mode} skip |
| |
| *** Test Cases *** |
| |
| Create Test Error Callout And Verify |
| [Documentation] Create error log callout and verify via REST. |
| [Tags] Create_Test_Error_Callout_And_Verify |
| |
| Create Test Error With Callout |
| Verify Test Error Log And Callout |
| |
| |
| Create Test Error Callout And Verify AdditionalData |
| [Documentation] Create Test Error Callout And Verify AdditionalData. |
| [Tags] Create_Test_Error_Callout_And_Verify_AdditionalData |
| |
| # Test error log entry example: |
| # "/xyz/openbmc_project/logging/entry/1": { |
| # "AdditionalData": [ |
| # "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00", |
| # "CALLOUT_ERRNO_TEST=0", |
| # "DEV_ADDR=0x0DEADEAD" |
| # ] |
| |
| Create Test Error With Callout |
| ${elog_entry}= Get Elog URL List |
| ${resp}= OpenBMC Get Request ${elog_entry[0]} |
| ${jsondata}= To JSON ${resp.content} |
| List Should Contain Value |
| ... ${jsondata["data"]["AdditionalData"]} CALLOUT_DEVICE_PATH_TEST=${target_device_path} |
| List Should Contain Value ${jsondata["data"]["AdditionalData"]} DEV_ADDR=0x0DEADEAD |
| |
| |
| Create Test Error Callout And Verify Associations |
| [Documentation] Create test error callout and verify Associations. |
| [Tags] Create_Test_Error_Callout_And_Verify_Associations |
| |
| # Test error log association entry example: |
| # "Associations": [ |
| # [ |
| # "callout", |
| # "fault", |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # ] |
| |
| Create Test Error With Callout |
| ${elog_entry}= Get Elog URL List |
| ${resp}= OpenBMC Get Request ${elog_entry[0]} |
| ${jsondata}= To JSON ${resp.content} |
| List Should Contain Value ${jsondata["data"]["Associations"][0]} callout |
| List Should Contain Value ${jsondata["data"]["Associations"][0]} fault |
| List Should Contain Value |
| ... ${jsondata["data"]["Associations"][0]} |
| ... /xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0 |
| |
| |
| Create Test Error Callout And Delete |
| [Documentation] Create Test Error Callout And Delete. |
| [Tags] Create_Test_Error_Callout_And_Delete |
| |
| # Test error log entry example: |
| # "/xyz/openbmc_project/logging/entry/1": { |
| # "AdditionalData": [ |
| # "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00", |
| # "CALLOUT_ERRNO_TEST=0", |
| # "DEV_ADDR=0x0DEADEAD" |
| # ], |
| # "Id": 1, |
| # "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout", |
| # "Resolved": 0, |
| # "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error", |
| # "Timestamp": 1487747332528, |
| # "Associations": [ |
| # [ |
| # "callout", |
| # "fault", |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # ] |
| # }, |
| # "/xyz/openbmc_project/logging/entry/1/callout": { |
| # "endpoints": [ |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # }, |
| |
| Create Test Error With Callout |
| ${elog_entry}= Get Elog URL List |
| Delete Error Log Entry ${elog_entry[0]} |
| ${resp}= OpenBMC Get Request ${elog_entry[0]}/callout |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND} |
| |
| |
| Create Two Test Error Callout And Delete |
| [Documentation] Create Two Test Error Callout And Delete. |
| [Tags] Create_Two_Test_Error_Callout_And_Delete |
| |
| # Test error log entry example: |
| # "/xyz/openbmc_project/logging/entry/1": { |
| # "AdditionalData": [ |
| # "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00", |
| # "CALLOUT_ERRNO_TEST=0", |
| # "DEV_ADDR=0x0DEADEAD" |
| # ], |
| # "Id": 1, |
| # "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout", |
| # "Resolved": 0, |
| # "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error", |
| # "Timestamp": 1487747332528, |
| # "Associations": [ |
| # [ |
| # "callout", |
| # "fault", |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # ] |
| # }, |
| # "/xyz/openbmc_project/logging/entry/1/callout": { |
| # "endpoints": [ |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # }, |
| # "/xyz/openbmc_project/logging/entry/2": { |
| # "AdditionalData": [ |
| # "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00", |
| # "CALLOUT_ERRNO_TEST=0", |
| # "DEV_ADDR=0x0DEADEAD" |
| # ], |
| # "Id": 2, |
| # "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout", |
| # "Resolved": 0, |
| # "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error", |
| # "Timestamp": 1487747332528, |
| # "Associations": [ |
| # [ |
| # "callout", |
| # "fault", |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # ] |
| # }, |
| # "/xyz/openbmc_project/logging/entry/2/callout": { |
| # "endpoints": [ |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # }, |
| |
| # Create two error logs. |
| Create Test Error With Callout |
| Create Test Error With Callout |
| |
| # Delete entry/2 elog entry. |
| ${elog_entry}= Get Elog URL List |
| Delete Error Log Entry ${elog_entry[1]} |
| |
| # Verify if entry/1 exist and entry/2 is deleted. |
| ${resp}= OpenBMC Get Request ${elog_entry[0]} |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_OK} |
| ${resp}= OpenBMC Get Request ${elog_entry[1]} |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND} |
| |
| |
| Create Test Error Callout And Verify LED |
| [Documentation] Create an error log callout and verify respective |
| ... LED state. |
| [Tags] Create_Test_Error_Callout_And_Verify_LED |
| |
| Create Test Error With Callout |
| |
| ${resp}= Get LED State XYZ cpu0_fault |
| Should Be Equal ${resp} ${1} |
| |
| |
| Set Resolved Field And Verify Callout Deletion |
| [Documentation] Set the "Resolved" error log and verify callout is deleted |
| [Tags] Set_Resolved_Field_And_Verify_Callout_Deletion |
| |
| Delete All Error Logs |
| Create Test Error With Callout |
| ${elog_entry}= Get URL List ${BMC_LOGGING_ENTRY} |
| ${resp}= OpenBMC Get Request ${elog_entry[0]} |
| ${jsondata}= To JSON ${resp.content} |
| Should Contain ${jsondata["data"]["Associations"][0]} callout |
| |
| # Set the error log field "Resolved". |
| # By doing so, the callout object should get deleted automatically. |
| ${valueDict}= Create Dictionary data=${1} |
| OpenBMC Put Request ${elog_entry[0]}/attr/Resolved data=${valueDict} |
| |
| # Verify if the callout entry is deleted. |
| ${resp}= OpenBMC Get Request ${elog_entry[0]}/callout |
| Should Be Equal As Strings ${resp.status_code} ${HTTP_NOT_FOUND} |
| |
| *** Keywords *** |
| |
| Callout Test Binary Exist |
| [Documentation] Verify existence of prerequisite callout-test. |
| |
| Open Connection And Log In |
| ${out} ${stderr}= Execute Command |
| ... which /tmp/tarball/bin/callout-test return_stderr=True |
| Should Be Empty ${stderr} |
| Should Contain ${out} callout-test |
| |
| |
| Create Test Error With Callout |
| [Documentation] Generate test error log with callout for CPU0. |
| |
| # Test error log entry example: |
| # "/xyz/openbmc_project/logging/entry/4": { |
| # "AdditionalData": [ |
| # "CALLOUT_DEVICE_PATH_TEST=/sys/devices/platform/fsi-master/slave@00:00", |
| # "CALLOUT_ERRNO_TEST=0", |
| # "DEV_ADDR=0x0DEADEAD" |
| # ], |
| # "Id": 4, |
| # "Message": "example.xyz.openbmc_project.Example.Elog.TestCallout", |
| # "Resolved": 0, |
| # "Severity": "xyz.openbmc_project.Logging.Entry.Level.Error", |
| # "Timestamp": 1487747332528, |
| # "Associations": [ |
| # [ |
| # "callout", |
| # "fault", |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # ] |
| # }, |
| # "/xyz/openbmc_project/logging/entry/4/callout": { |
| # "endpoints": [ |
| # "/xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0" |
| # ] |
| # }, |
| |
| BMC Execute Command |
| ... /tmp/tarball/bin/callout-test ${target_device_path} |
| |
| Verify Test Error Log And Callout |
| [Documentation] Verify test error log entries. |
| ${elog_entry}= Get Elog URL List |
| ${resp}= OpenBMC Get Request ${elog_entry[0]} |
| ${json}= To JSON ${resp.content} |
| |
| Should Be Equal ${json["data"]["Message"]} |
| ... example.xyz.openbmc_project.Example.Elog.TestCallout |
| |
| Should Be Equal ${json["data"]["Severity"]} |
| ... xyz.openbmc_project.Logging.Entry.Level.Error |
| |
| ${content}= Read Attribute ${elog_entry[0]}/callout endpoints |
| |
| Should Be Equal ${content[0]} |
| ... /xyz/openbmc_project/inventory/system/chassis/motherboard/cpu0 |
| |
| |
| Test Setup Execution |
| [Documentation] Do test case setup tasks. |
| |
| ${status}= Run Keyword And Return Status Callout Test Binary Exist |
| Run Keyword If ${status} == ${False} Install Tarball |
| Delete All Error Logs |
| |
| |
| Install Tarball |
| [Documentation] Install tarball on BMC. |
| |
| Run Keyword If '${DEBUG_TARBALL_PATH}' == '${EMPTY}' Return from Keyword |
| BMC Execute Command rm -rf /tmp/tarball |
| Install Debug Tarball On BMC ${DEBUG_TARBALL_PATH} |
| |
| |
| Suite Setup Execution |
| [Documentation] Do test case setup tasks. |
| |
| Redfish.Login |
| |
| Redfish Purge Event Log |
| |
| Redfish Power On stack_mode=skip quiet=1 |
| |
| ${status}= Run Keyword And Return Status Logging Test Binary Exist |
| Run Keyword If ${status} == ${False} Install Tarball |
| |
| |
| Suite Teardown Execution |
| [Documentation] Do the post suite teardown. |
| |
| Redfish.Logout |