blob: ca7356c21d5cb83cb68274068ae9625ac8eda71c [file] [log] [blame]
*** Settings ***
Documentation Test BMC manager protocol enable/disable functionality.
Resource ../../lib/bmc_redfish_resource.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/protocol_setting_utils.robot
Suite Setup Suite Setup Execution
Suite Teardown Run Keywords Enable IPMI Protocol ${initial_ipmi_state} AND Redfish.Logout
Test Teardown FFDC On Test Case Fail
*** Variables ***
${cmd_prefix} ipmitool -I lanplus -C 17 -p 623 -U ${OPENBMC_USERNAME} -P ${OPENBMC_PASSWORD}
*** Test Cases ***
Verify SSH Is Enabled By Default
[Documentation] Verify SSH is enabled by default.
[Tags] Verify_SSH_Is_Enabled_By_Default
# Check if SSH is enabled by default.
Verify SSH Protocol State ${True}
Enable SSH Protocol And Verify
[Documentation] Enable SSH protocol and verify.
[Tags] Enable_SSH_Protocol_And_Verify
Enable SSH Protocol ${True}
# Check if SSH is really enabled via Redfish.
Verify SSH Protocol State ${True}
# Check if SSH login and commands on SSH session work.
Verify SSH Login And Commands Work
Disable SSH Protocol And Verify
[Documentation] Disable SSH protocol and verify.
[Teardown] Enable SSH Protocol ${True}
# Disable SSH interface.
Enable SSH Protocol ${False}
# Check if SSH is really disabled via Redfish.
Verify SSH Protocol State ${False}
# Check if SSH login and commands fail.
${status}= Run Keyword And Return Status
... Verify SSH Login And Commands Work
Should Be Equal As Strings ${status} False
... msg=SSH Login and commands are working after disabling SSH.
Enable SSH Protocol And Check Persistency On BMC Reboot
[Documentation] Enable SSH protocol and verify persistency.
Enable SSH Protocol ${True}
# Reboot BMC and verify persistency.
OBMC Reboot (off)
# Check if SSH is really enabled via Redfish.
Verify SSH Protocol State ${True}
# Check if SSH login and commands on SSH session work.
Verify SSH Login And Commands Work
Disable SSH Protocol And Check Persistency On BMC Reboot
[Documentation] Disable SSH protocol and verify persistency.
[Teardown] Enable SSH Protocol ${True}
# Disable SSH interface.
Enable SSH Protocol ${False}
# Reboot BMC and verify persistency.
Redfish BMC Reboot
# Check if SSH is really disabled via Redfish.
Verify SSH Protocol State ${False}
# Check if SSH login and commands fail.
${status}= Run Keyword And Return Status
... Verify SSH Login And Commands Work
Should Be Equal As Strings ${status} False
... msg=SSH Login and commands are working after disabling SSH.
Verify Disabling SSH Port Does Not Disable Serial Console Port
[Documentation] Verify disabling SSH does not disable serial console port.
[Tags] Verify_Disabling_SSH_Port_Does_Not_Disable_Serial_Console_Port
[Teardown] Enable SSH Protocol ${True}
# Disable SSH interface.
Enable SSH Protocol ${False}
# Check able to establish connection with serial port console.
Open Connection And Log In host=${OPENBMC_HOST} port=2200
Close All Connections
Verify Existing SSH Session Gets Closed On Disabling SSH
[Documentation] Verify existing SSH session gets closed on disabling ssh.
[Tags] Verify_Existing_SSH_Session_Gets_Closed_On_Disabling_SSH
[Teardown] Enable SSH Protocol ${True}
# Open SSH connection.
Open Connection And Login
# Disable SSH interface.
Enable SSH Protocol ${False}
# Check if SSH is really disabled via Redfish.
Verify SSH Protocol State ${False}
# Try to execute CLI command on SSH connection.
# It should fail as disable SSH will close pre existing sessions.
${status}= Run Keyword And Return Status
... BMC Execute Command /sbin/ip addr
Should Be Equal As Strings ${status} False
... msg=Disabling SSH has not closed existing SSH sessions.
Enable IPMI Protocol And Verify
[Documentation] Enable IPMI protocol and verify.
[Tags] Enable_IPMI_Protocol_And_Verify
Enable IPMI Protocol ${True}
# Check if IPMI is really enabled via Redfish.
Verify IPMI Protocol State ${True}
# Check if IPMI commands starts working.
Verify IPMI Works lan print
Disable IPMI Protocol And Verify
[Documentation] Disable IPMI protocol and verify.
[Tags] Disable_IPMI_Protocol_And_Verify
# Disable IPMI interface.
Enable IPMI Protocol ${False}
# Check if IPMI is really disabled via Redfish.
Verify IPMI Protocol State ${False}
# Check if IPMI commands fail.
${status}= Run Keyword And Return Status
... Verify IPMI Works lan print
Should Be Equal As Strings ${status} False
... msg=IPMI commands are working after disabling IPMI.
*** Keywords ***
Suite Setup Execution
[Documentation] Do suite setup tasks.
Redfish.Login
${state}= Run Keyword And Return Status Verify IPMI Protocol State
Set Suite Variable ${initial_ipmi_state} ${state}
Is BMC LastResetTime Changed
[Documentation] return fail if BMC last reset time is not changed
[Arguments] ${reset_time}
${last_reset_time}= Redfish.Get Attribute /redfish/v1/Managers/bmc LastResetTime
Should Not Be Equal ${last_reset_time} ${reset_time}
Redfish BMC Reboot
[Documentation] Use Redfish API reboot BMC and wait for BMC ready
# Get BMC last reset time for compare
${last_reset_time}= Redfish.Get Attribute /redfish/v1/Managers/bmc LastResetTime
# Reboot BMC by Redfish API
Redfish BMC Reset Operation
# Wait for BMC real reboot and Redfish API ready
Wait Until Keyword Succeeds 3 min 10 sec Is BMC LastResetTime Changed ${last_reset_time}