blob: a31a521074b02b8cd6ca4c6093f8ed8fd07b773e [file] [log] [blame]
*** Settings ***
Documentation This suite is for testing general IPMI functions.
Resource ../../lib/ipmi_client.robot
Resource ../../lib/openbmc_ffdc.robot
Resource ../../lib/boot_utils.robot
Resource ../../lib/utils.robot
Resource ../../lib/bmc_network_utils.robot
Resource ../../lib/logging_utils.robot
Library ../../lib/ipmi_utils.py
Variables ../../data/ipmi_raw_cmd_table.py
Library ../../lib/gen_misc.py
Test Setup Log to Console ${EMPTY}
Test Teardown FFDC On Test Case Fail
*** Variables ***
${allowed_temp_diff}= ${1}
${allowed_power_diff}= ${10}
*** Test Cases ***
Verify Chassis Identify via IPMI
[Documentation] Verify "chassis identify" using IPMI command.
[Tags] Verify_Chassis_Identify_via_IPMI
# Set to default "chassis identify" and verify that LED blinks for 15s.
Run IPMI Standard Command chassis identify
Verify Identify LED State ${1}
Sleep 15s
Verify Identify LED State ${0}
# Set "chassis identify" to 10s and verify that the LED blinks for 10s.
Run IPMI Standard Command chassis identify 10
Verify Identify LED State ${1}
Sleep 10s
Verify Identify LED State ${0}
Verify Chassis Identify Off And Force Identify On via IPMI
[Documentation] Verify "chassis identify" off
... and "force identify on" via IPMI.
[Tags] Verify_Chassis_Identify_Off_And_Force_Identify_On_via_IPMI
# Set the LED to "Force Identify On".
Run IPMI Standard Command chassis identify force
Verify Identify LED State ${1}
# Set "chassis identify" to 0 and verify that the LED turns off.
Run IPMI Standard Command chassis identify 0
Verify Identify LED State ${0}
Test Watchdog Reset Via IPMI And Verify Using REST
[Documentation] Test watchdog reset via IPMI and verify using REST.
[Tags] Test_Watchdog_Reset_Via_IPMI_And_Verify_Using_REST
Initiate Host Boot
Set Watchdog Enabled Using REST ${1}
Watchdog Object Should Exist
# Resetting the watchdog via IPMI.
Run IPMI Standard Command mc watchdog reset
# Verify the watchdog is reset using REST after an interval of 1000ms.
Sleep 1000ms
${watchdog_time_left}=
... Read Attribute ${HOST_WATCHDOG_URI} TimeRemaining
Should Be True
... ${watchdog_time_left}<${1200000} and ${watchdog_time_left}>${2000}
... msg=Watchdog timer didn't reset.
Test Watchdog Off Via IPMI And Verify Using REST
[Documentation] Test watchdog off via IPMI and verify using REST.
[Tags] Test_Watchdog_Off_Via_IPMI_And_Verify_Using_REST
Initiate Host Boot
Set Watchdog Enabled Using REST ${1}
Watchdog Object Should Exist
# Turn off the watchdog via IPMI.
Run IPMI Standard Command mc watchdog off
# Verify the watchdog is off using REST
${watchdog_state}= Read Attribute ${HOST_WATCHDOG_URI} Enabled
Should Be Equal ${watchdog_state} ${0}
... msg=msg=Verification failed for watchdog off check.
Test Ambient Temperature Via IPMI
[Documentation] Test ambient temperature via IPMI and verify using REST.
[Tags] Test_Ambient_Temperature_Via_IPMI
# Entity ID Entity Instance Temp. Readings
# Inlet air temperature(40h) 1 +19 C
# CPU temperature sensors(41h) 5 +51 C
# CPU temperature sensors(41h) 6 +50 C
# CPU temperature sensors(41h) 7 +50 C
# CPU temperature sensors(41h) 8 +50 C
# CPU temperature sensors(41h) 9 +50 C
# CPU temperature sensors(41h) 10 +48 C
# CPU temperature sensors(41h) 11 +49 C
# CPU temperature sensors(41h) 12 +47 C
# CPU temperature sensors(41h) 8 +50 C
# CPU temperature sensors(41h) 16 +51 C
# CPU temperature sensors(41h) 24 +50 C
# CPU temperature sensors(41h) 32 +43 C
# CPU temperature sensors(41h) 40 +43 C
# Baseboard temperature sensors(42h) 1 +35 C
${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10
Should Contain ${temp_reading} Inlet air temperature
... msg="Unable to get inlet temperature via DCMI".
${ambient_temp_line}=
... Get Lines Containing String ${temp_reading}
... Inlet air temperature case-insensitive
${ambient_temp_ipmi}= Fetch From Right ${ambient_temp_line} +
${ambient_temp_ipmi}= Remove String ${ambient_temp_ipmi} ${SPACE}C
${ambient_temp_rest}= Read Attribute
... ${SENSORS_URI}temperature/ambient Value
# Example of ambient temperature via REST
# "CriticalAlarmHigh": 0,
# "CriticalAlarmLow": 0,
# "CriticalHigh": 35000,
# "CriticalLow": 0,
# "Scale": -3,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
# "Value": 21775,
# "WarningAlarmHigh": 0,
# "WarningAlarmLow": 0,
# "WarningHigh": 25000,
# "WarningLow": 0
# Get temperature value based on scale i.e. Value * (10 power Scale Value)
# e.g. from above case 21775 * (10 power -3) = 21775/1000
${ambient_temp_rest}= Evaluate ${ambient_temp_rest}/1000
${ipmi_rest_temp_diff}=
... Evaluate abs(${ambient_temp_rest} - ${ambient_temp_ipmi})
Should Be True ${ipmi_rest_temp_diff} <= ${allowed_temp_diff}
... msg=Ambient temperature above allowed threshold ${allowed_temp_diff}.
Test Power Reading Via IPMI With Host Off
[Documentation] Test power reading via IPMI with host off state and
... verify using REST.
[Tags] Test_Power_Reading_Via_IPMI_With_Host_Off
REST Power Off stack_mode=skip quiet=1
Wait Until Keyword Succeeds 1 min 30 sec Verify Power Reading
Test Power Reading Via IPMI With Host Booted
[Documentation] Test power reading via IPMI with host booted state and
... verify using REST.
[Tags] Test_Power_Reading_Via_IPMI_With_Host_Booted
REST Power On stack_mode=skip quiet=1
# For a good power reading take a 3 samples for 15 seconds interval and
# average it out.
Wait Until Keyword Succeeds 2 min 30 sec Verify Power Reading
Test Power Reading Via IPMI Raw Command
[Documentation] Test power reading via IPMI raw command and verify
... using REST.
[Tags] Test_Power_Reading_Via_IPMI_Raw_Command
# Response data structure of power reading command output via IPMI.
# 1 Completion Code. Refer to section 8, DCMI Completion Codes.
# 2 Group Extension Identification = DCh
# 3:4 Current Power in watts
REST Power On stack_mode=skip quiet=1
Wait Until Keyword Succeeds 2 min 30 sec Verify Power Reading Via Raw Command
Test Baseboard Temperature Via IPMI
[Documentation] Test baseboard temperature via IPMI and verify using REST.
[Tags] Test_Baseboard_Temperature_Via_IPMI
# Example of IPMI dcmi get_temp_reading output:
# Entity ID Entity Instance Temp. Readings
# Inlet air temperature(40h) 1 +19 C
# CPU temperature sensors(41h) 5 +51 C
# CPU temperature sensors(41h) 6 +50 C
# CPU temperature sensors(41h) 7 +50 C
# CPU temperature sensors(41h) 8 +50 C
# CPU temperature sensors(41h) 9 +50 C
# CPU temperature sensors(41h) 10 +48 C
# CPU temperature sensors(41h) 11 +49 C
# CPU temperature sensors(41h) 12 +47 C
# CPU temperature sensors(41h) 8 +50 C
# CPU temperature sensors(41h) 16 +51 C
# CPU temperature sensors(41h) 24 +50 C
# CPU temperature sensors(41h) 32 +43 C
# CPU temperature sensors(41h) 40 +43 C
# Baseboard temperature sensors(42h) 1 +35 C
${temp_reading}= Run IPMI Standard Command dcmi get_temp_reading -N 10
Should Contain ${temp_reading} Baseboard temperature sensors
... msg="Unable to get baseboard temperature via DCMI".
${baseboard_temp_line}=
... Get Lines Containing String ${temp_reading}
... Baseboard temperature case-insensitive=True
${baseboard_temp_ipmi}= Fetch From Right ${baseboard_temp_line} +
${baseboard_temp_ipmi}= Remove String ${baseboard_temp_ipmi} ${SPACE}C
${baseboard_temp_rest}= Read Attribute
... /xyz/openbmc_project/sensors/temperature/pcie Value
${baseboard_temp_rest}= Evaluate ${baseboard_temp_rest}/1000
Should Be True
... ${baseboard_temp_rest} - ${baseboard_temp_ipmi} <= ${allowed_temp_diff}
... msg=Baseboard temperature above allowed threshold ${allowed_temp_diff}.
Retrieve Network Mode Via IPMI And Verify Using REST
[Documentation] Retrieve network mode from LAN print using IPMI.
[Tags] Retrieve_Network_Mode_Via_IPMI_And_Verify_Using_REST
# Fetch "Mode" from IPMI LAN print.
${network_mode_ipmi}= Fetch Details From LAN Print Source
# Verify "Mode" using REST.
${network_mode_rest}= Read Attribute
... ${NETWORK_MANAGER}eth0 DHCPEnabled
Run Keyword If '${network_mode_ipmi}' == 'Static Address'
... Should Be Equal ${network_mode_rest} ${0}
... msg=Verification of network setting failed.
... ELSE IF '${network_mode_ipmi}' == 'DHCP'
... Should Be Equal ${network_mode_rest} ${1}
... msg=Verification of network setting failed.
Verify Get Device ID
[Documentation] Verify get device ID command output.
[Tags] Verify_Get_Device_ID
# Example of get device ID command output:
# Device ID : 0
# Device Revision : 0
# Firmware Revision : 2.01
# IPMI Version : 2.0
# Manufacturer ID : 42817
# Manufacturer Name : Unknown (0xA741)
# Product ID : 16975 (0x424f)
# Product Name : Unknown (0x424F)
# Device Available : yes
# Provides Device SDRs : yes
# Additional Device Support :
# Sensor Device
# SEL Device
# FRU Inventory Device
# Chassis Device
# Aux Firmware Rev Info :
# 0x04
# 0x38
# 0x00
# 0x03
${mc_info}= Get MC Info
Should Be Equal ${mc_info['device_id']} 0
Should Be Equal ${mc_info['device_revision']} 0
# Get firmware revision from mc info command output i.e. 2.01
${ipmi_fw_major_version} ${ipmi_fw_minor_version}=
... Split String ${mc_info['firmware_revision']} .
# Convert minor firmware version from BCD format to integer. i.e. 01 to 1
${ipmi_fw_minor_version}= Convert To Integer ${ipmi_fw_minor_version}
# Get BMC version from BMC CLI i.e. 2.2 from "v2.2-253-g00050f1"
${bmc_version_full}= Get BMC Version
${bmc_version}=
... Remove String Using Regexp ${bmc_version_full} ^[^0-9]+ [^0-9\.].*
# Get major and minor version from BMC version i.e. 2 and 1 from 2.1
@{major_minor_version}= Split String ${bmc_version} .
Should Be Equal As Strings ${ipmi_fw_major_version} ${major_minor_version[0]}
... msg=Major version mismatch.
Should Be Equal As Strings ${ipmi_fw_minor_version} ${major_minor_version[1]}
... msg=Minor version mismatch.
Should Be Equal ${mc_info['ipmi_version']} 2.0
# TODO: Verify Manufacturer and Product IDs directly from json file.
# Reference : openbmc/openbmc-test-automation#1244
Should Be Equal ${mc_info['manufacturer_id']} 42817
Should Be Equal ${mc_info['product_id']} 16975 (0x424f)
Should Be Equal ${mc_info['device_available']} yes
Should Be Equal ${mc_info['provides_device_sdrs']} yes
Should Contain ${mc_info['additional_device_support']} Sensor Device
Should Contain ${mc_info['additional_device_support']} SEL Device
Should Contain
... ${mc_info['additional_device_support']} FRU Inventory Device
Should Contain ${mc_info['additional_device_support']} Chassis Device
# Auxiliary revision data verification.
${aux_version}= Get Aux Version ${bmc_version_full}
# From aux_firmware_rev_info field ['0x04', '0x38', '0x00', '0x03']
${bmc_aux_version}= Catenate
... SEPARATOR=
... ${mc_info['aux_firmware_rev_info'][0][2:]}
... ${mc_info['aux_firmware_rev_info'][1][2:]}
... ${mc_info['aux_firmware_rev_info'][2][2:]}
... ${mc_info['aux_firmware_rev_info'][3][2:]}
Should Be Equal As Integers
... ${bmc_aux_version} ${aux_version}
... msg=BMC aux version ${bmc_aux_version} does not match expected value of ${aux_version}.
Test IPMI Restriction Mode
[Documentation] Set restricition mode via REST and verify IPMI operation.
[Tags] Test_IPMI_Restriction_Mode
# Forego normal test setup:
[Setup] No Operation
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Set IPMI Restriction Mode xyz.openbmc_project.Control.Security.RestrictionMode.Modes.None
# By default no IPMI operations are restricted.
# /xyz/openbmc_project/control/host0/restriction_mode/attr/RestrictionMode
# {
# "data": "xyz.openbmc_project.Control.Security.RestrictionMode.Modes.None",
# "message": "200 OK",
# "status": "ok"
# }
# Refer to: #openbmc/phosphor-host-ipmid/blob/master/host-ipmid-whitelist.conf
# Set the restriction mode to Whitelist IPMI commands only:
# /xyz/openbmc_project/control/host0/restriction_mode/attr/RestrictionMode
# {
# "data": "xyz.openbmc_project.Control.Security.RestrictionMode.Modes.Whitelist",
# "message": "200 OK",
# "status": "ok"
# }
Set IPMI Restriction Mode xyz.openbmc_project.Control.Security.RestrictionMode.Modes.Whitelist
# Attempt white-listed operation expecting success.
IPMI Power On
# Attempt non white-listed operation expecting failure.
Run Keyword And Expect Error *Insufficient privilege level*
... Run Inband IPMI Standard Command lan set 1 access on
*** Keywords ***
Set Watchdog Enabled Using REST
[Documentation] Set watchdog Enabled field using REST.
[Arguments] ${value}
# Description of argument(s):
# value Integer value (eg. "0-Disabled", "1-Enabled").
${value_dict}= Create Dictionary data=${value}
${resp}= OpenBMC Put Request ${HOST_WATCHDOG_URI}attr/Enabled
... data=${value_dict}
Fetch Details From LAN Print
[Documentation] Fetch details from LAN print.
[Arguments] ${field_name}
# Description of argument(s):
# ${field_name} Field name to be fetched from LAN print
# (e.g. "MAC Address", "Source").
${stdout}= Run IPMI Standard Command lan print
${fetch_value}= Get Lines Containing String ${stdout} ${field_name}
${value_fetch}= Fetch From Right ${fetch_value} :${SPACE}
[Return] ${value_fetch}
Verify Power Reading
[Documentation] Get dcmi power reading via IPMI.
# Example of power reading command output via IPMI.
# Instantaneous power reading: 235 Watts
# Minimum during sampling period: 235 Watts
# Maximum during sampling period: 235 Watts
# Average power reading over sample period: 235 Watts
# IPMI timestamp: Thu Jan 1 00:00:00 1970
# Sampling period: 00000000 Seconds.
# Power reading state is: deactivated
${power_reading}= Get IPMI Power Reading
${host_state}= Get Host State
Run Keyword If '${host_state}' == 'Off'
... Should Be Equal ${power_reading['instantaneous_power_reading']} 0
... msg=Power reading not zero when power is off.
Run Keyword If '${power_reading['instantaneous_power_reading']}' != '0'
... Verify Power Reading Using REST ${power_reading['instantaneous_power_reading']}
Verify Power Reading Via Raw Command
[Documentation] Get dcmi power reading via IPMI raw command.
${ipmi_raw_output}= Run IPMI Standard Command
... raw ${IPMI_RAW_CMD['power_reading']['Get'][0]}
@{raw_output_list}= Split String ${ipmi_raw_output} ${SPACE}
# On successful execution of raw IPMI power reading command, completion
# code does not come in output. So current power value will start from 2
# byte instead of 3.
${power_reading_ipmi_raw_3_item}= Get From List ${raw_output_list} 2
${power_reading_ipmi_raw_3_item}=
... Convert To Integer 0x${power_reading_ipmi_raw_3_item}
${power_reading_rest}= Read Attribute
... ${SENSORS_URI}power/total_power Value
# Example of power reading via REST
# "CriticalAlarmHigh": 0,
# "CriticalAlarmLow": 0,
# "CriticalHigh": 3100000000,
# "CriticalLow": 0,
# "Scale": -6,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts",
# "Value": 228000000,
# "WarningAlarmHigh": 0,
# "WarningAlarmLow": 0,
# "WarningHigh": 3050000000,
# "WarningLow": 0
# Get power value based on scale i.e. Value * (10 power Scale Value)
# e.g. from above case 228000000 * (10 power -6) = 228000000/1000000
${power_reading_rest}= Evaluate ${power_reading_rest}/1000000
${ipmi_rest_power_diff}=
... Evaluate abs(${power_reading_rest} - ${power_reading_ipmi_raw_3_item})
Should Be True ${ipmi_rest_power_diff} <= ${allowed_power_diff}
... msg=Power Reading above allowed threshold ${allowed_power_diff}.
Verify Power Reading Using REST
[Documentation] Verify power reading using REST.
[Arguments] ${power_reading}
# Description of argument(s):
# power_reading IPMI Power reading
${power_reading_rest}= Read Attribute
... ${SENSORS_URI}power/total_power Value
# Example of power reading via REST
# "CriticalAlarmHigh": 0,
# "CriticalAlarmLow": 0,
# "CriticalHigh": 3100000000,
# "CriticalLow": 0,
# "Scale": -6,
# "Unit": "xyz.openbmc_project.Sensor.Value.Unit.Watts",
# "Value": 228000000,
# "WarningAlarmHigh": 0,
# "WarningAlarmLow": 0,
# "WarningHigh": 3050000000,
# "WarningLow": 0
# Get power value based on scale i.e. Value * (10 power Scale Value)
# e.g. from above case 228000000 * (10 power -6) = 228000000/1000000
${power_reading_rest}= Evaluate ${power_reading_rest}/1000000
${ipmi_rest_power_diff}=
... Evaluate abs(${power_reading_rest} - ${power_reading})
Should Be True ${ipmi_rest_power_diff} <= ${allowed_power_diff}
... msg=Power reading above allowed threshold ${allowed_power_diff}.
Set IPMI Restriction Mode
[Documentation] Set the IPMI restriction mode.
[Arguments] ${restriction_mode}
# Description of argument(s):
# restriction_mode IPMI valid restriction modes.
${valueDict}= Create Dictionary data=${restriction_mode}
Write Attribute ${CONTROL_HOST_URI}restriction_mode/
... RestrictionMode data=${valueDict}