| # Basic power on test. |
| -i Test_Remote_Logging_Configuration |
| -i Check_For_Application_Failures |
| -i Test_SSH_And_IPMI_Connections |
| # IPMI test. |
| -i IPMI_Chassis_Restore_Power_Policy |
| -i Verify_Host_PowerOn_Via_IPMI |
| -i Verify_Host_PowerOff_Via_IPMI |
| -i Test_FRU_Info_At_Power_On |
| -i Test_IPMI_Warm_Reset |
| -i Test_CPU_Core_SDR_Info_At_Power_On |
| -i Test_DIMM_SDR_Info_At_Power_On |
| -i Test_Turbo_Allowed_SDR_Info |
| -i Test_Auto_Reboot_SDR_Info |
| -i Test_TPM_Enable_SDR_Info |
| -i DIMM_Present_And_Not_Present |
| -i Set_SOL_Disabled |
| -i Verify_SOL_During_Boot |
| -i Set_Valid_SOL_Retry_Count |
| -i Verify_IPMI_SEL_Version |
| -i Verify_Empty_SEL |
| -i Verify_Supported_Cipher_List |
| -i Verify_Unsupported_Cipher_List |
| -i Set_Asset_Tag_With_Valid_String_Length |
| -i Verify_Get_And_Set_Management_Controller_ID_String |
| -i Test_Management_Controller_ID_String_Status_via_IPMI |
| -i Verify_Chassis_Identify_via_IPMI |
| -i Test_Watchdog_Reset_Via_IPMI_And_Verify_Using_REST |
| -i Test_Ambient_Temperature_Via_IPMI |
| -i Verify_Get_DCMI_Capabilities |
| -i Test_Power_Reading_Via_IPMI_With_Host_Booted |
| -i Retrieve_IP_Address_Via_IPMI_And_Verify_With_BMC_Details |
| -i Verify_Get_Device_ID |
| -i Verify_SDR_Info |
| -i Verify_Supported_Cipher_List |
| -i Verify_Unsupported_Cipher_List |
| -i Verify_Supported_Cipher_List_Via_Lan_Print |
| -i Verify_Supported_Cipher_Via_Getciphers |
| # Device tree. |
| -i Check_BMC_Model_Property_Is_Set |
| -i Check_BMC_Compatible_Property_Is_Set |
| -i Check_BMC_CPU_Name_Property_Is_Set |
| -i Check_BMC_CPU_Compatible_Property_Is_Set |
| -i Check_BMC_GPIO_FSI_Name_Property_Is_Set |
| -i Check_BMC_GPIO_FSI_Compatible_Property_Is_Set |
| -i Check_BMC_GPIO_keys_Name_Property_Is_Set |
| -i Check_BMC_GPIO_keys_Compatible_Property_Is_Set |
| -i Check_BMC_IIO-HWMON_Name_Property_Is_Set |
| -i Check_BMC_IIO-HWMON_Compatible_Property_Is_Set |
| -i Check_BMC_LED_Name_Property_Is_Set |
| -i Check_BMC_LED_Compatible_Property_Is_Set |
| # BMC Dump. |
| -i Verify_User_Initiated_Dump_Size |
| -i Delete_All_BMC_Dumps_And_Verify |
| -i Verify_Dump_Persistency_On_Reset |
| # BMC File Mirroring. |
| -i Test_BMC_Alt_Side_Mirroring |
| # BMC boot and device policies. |
| -i Set_The_Boot_Source_As_Disk_Using_REST_API |
| -i Set_The_Boot_Source_As_CDROM_Using_Ipmitool |
| -i Set_The_Boot_Mode_As_Setup_Using_REST_API |
| -i Set_The_Boot_Mode_As_Safe_Using_Ipmitool |
| -i Set_Boot_Policy_To_PERMANENT_via_REST |
| -i Set_Boot_Policy_To_ONETIME_via_IPMITOOL |
| -i Test_Boot_Order_via_REST |
| # Hardware Sensors. |
| -i Verify_System_Ambient_Temperature |
| -i Verify_Fan_Sensor_Attributes |
| -i Verify_PCIE_Sensor_Attributes |
| -i Verify_Rail_Voltage_Sensor_Attributes |
| -i Verify_VDN_Temperature_Sensors_Attributes |
| -i Verify_VCS_Temperature_Sensors_Attributes |
| -i Verify_VDD_Temperature_Sensors_Attributes |
| -i Verify_VDDR_Temperature_Sensors_Attributes |
| -i Verify_Power_Redundancy_Using_REST |
| -i Verify_Power_Redundancy_Using_IPMI |
| # System Inventory. |
| -i Verify_System_Inventory_Path |
| -i Verify_Boxelder_Present_Property |
| -i Verify_UUID_Entry |
| -i Verify_Boxelder_MAC_Address_Property_Is_Populated |
| -i Verify_Chassis_Motherboard_Properties |
| -i Verify_CPU_Present |
| -i Verify_DIMM_Present |
| -i Verify_FRU_Properties |
| -i Verify_GPU_Properties |
| -i Verify_Core_Properties |
| -i Verify_Fan_Properties |
| -i Verify_Core_Functional_State |
| -i Verify_DIMM_Functional_State |
| -i Verify_Fan_Functional_State |
| -i Verify_CPU_Functional_State |
| -i Verify_GPU_Functional_State |
| -i Check_Air_Or_Water_Cooled |
| -i Verify_Minimal_CPU_Inventory |
| -i Verify_Minimal_DIMM_Inventory |
| -i Verify_Minimal_Core_Inventory |
| -i Verify_Minimal_Fan_Inventory |
| -i Verify_Minimal_Power_Supply_Inventory |
| # LED |
| -i Verify_Rear_Power_LED_With_Host_Power_Off |
| -i Verify_Rear_Power_LED_With_Host_Power_On |
| # OCC and reset reload. |
| -i Verify_OCC_State_After_BMC_Reset |
| # Power Restory policy. |
| -i Test_Restore_Policy_ALWAYS_POWER_OFF_With_Host_Off |
| # REST Test. |
| -i REST_Login_Session_To_BMC |
| -i REST_Logout_Session_To_BMC |
| -i REST_Delete_All_Sessions_And_Expect_Error |
| -i Multiple_Requests_On_BMC_Using_Single_REST_Session |
| -i Verify_REST_JSON_Data_On_Success |
| -i Verify_REST_JSON_Data_On_Failure |
| -i Verify_REST_Get_Message_JSON_Compliant |
| -i Verify_REST_Post_Message_JSON_Compliant |
| -i Verify_REST_Bad_Request_Post_Message_JSON_Compliant |
| -i REST_Put_Message_JSON_Format_Compliance_Test |
| -i Check_Response_Codes_415 |
| -i Get_Response_Codes |
| -i Get_Data |
| -i Get_Data_Validation |
| -i Put_Response_Codes |
| -i Put_Data_Validation |
| -i Post_Response_Codes |
| -i Delete_Response_Codes |
| -i Verify_All_REST_Objects_Are_Accessible |
| # Soft boot sensors. |
| -i Verify_Boot_Sensor_States_At_Host_Booted |
| # Software manager. |
| -i Verify_Software_Purpose |
| -i BMC_Software_Hex_ID |
| -i BMC_Software_Version |
| -i BMC_Software_Path |
| -i BMC_Software_RequestedActivation |
| -i BMC_Software_Activation_Association |
| -i Host_Software_Hex_ID |
| -i Host_Software_Version |
| -i Host_Software_Path |
| -i BMC_Software_RequestedActivation |
| -i Host_Software_Activation_Association |
| # Time. |
| -i Get_System_Time |
| -i Set_Valid_System_Time |
| -i Set_BMC_Time_With_BMC_And_Manual |
| -i Set_BMC_Time_With_Both_And_Manual |
| -i Set_BMC_Time_With_Split_And_Manual |
| -i Set_Host_Time_With_Host_And_Manual |
| -i Set_Host_Time_With_Both_And_Manual |
| -i Set_Host_Time_With_Split_And_Manual |
| -i Set_Host_Time_With_Split_And_NTP |
| # Logging and SEL. |
| -i Verify_eSEL_Using_REST |
| -i Verify_eSEL_Entries_Using_REST |
| -i Verify_eSEL_Description_And_EntryID_Using_REST |
| -i Check_eSEL_AdditionalData |
| -i Create_Test_Error_And_Verify |
| -i Test_Error_Persistency_On_Restart |
| -i Test_Error_Entry_Numbering_Reset_On_Restart |
| -i Create_Test_Error_And_Verify_Resolved_Field |
| -i Create_Test_Error_And_Verify_Time_Stamp |
| -i Create_Test_Error_Log_And_Delete |
| -i Verify_IPMI_SEL_Delete |
| -i Verify_IPMI_SEL_Entries |
| -i Verify_IPMI_SEL_Last_Add_Time |
| -i Create_Test_Error_Callout_And_Verify_AdditionalData |
| -i Create_Test_Error_Callout_And_Verify_Associations |
| -i Create_Test_Error_Callout_And_Verify_LED |
| -i Set_Resolved_Field_And_Verify_Callout_Deletion |
| # Network |
| -i Get_BMC_IPv4_Address_And_Verify |
| -i Verify_IPv4_Prefix_Length |
| -i Verify_Gateway_Address |
| -i Verify_MAC_Address |
| -i Add_Fourth_Octet_Threshold_IP_And_Verify |
| -i Add_Third_Octet_Threshold_IP_And_Verify |
| -i Add_Second_Octet_Threshold_IP_And_Verify |
| -i Add_First_Octet_Threshold_IP_And_Verify |
| -i Verify_Hostname |
| # SNMP |
| -i Configure_SNMP_Manager_On_BMC_And_Verify |
| -i Configure_SNMP_Manager_On_BMC_With_Non_Default_Port_And_Verify |
| -i Configure_SNMP_Manager_On_BMC_With_Out_Of_Range_IP_And_Verify |
| -i Configure_Multiple_SNMP_Managers_And_Verify |
| -i Configure_Multiple_SNMP_Managers_With_Non_Default_Port_And_Verify |
| -i Configure_Multiple_SNMP_Managers_With_Different_Ports_And_Verify |
| -i Configure_SNMP_Manager_On_BMC_With_Empty_Port_And_Verify |
| # Fan and energy scale test. |
| -i Escale_Base_Test_Inactive_Monitoring |
| -i Escale_Base_Test_Active_Monitoring |
| -i Escale_Power_Setting_Via_REST_And_Verify |
| -i Escale_Power_Setting_Via_IPMI_And_Verify |
| -i Escale_Activation_Test_Via_REST |
| -i Escale_Dectivation_Test_Via_REST |
| -i Check_Number_Of_Fans_With_Power_On |
| -i Check_Number_Of_Fan_Monitors_With_Power_On |
| -i Check_Fan_Speed |