| *** Settings *** |
| |
| Documentation Test Redfish SessionService. |
| |
| Resource ../../lib/bmc_redfish_utils.robot |
| Resource ../../lib/openbmc_ffdc.robot |
| |
| Suite Setup Suite Setup Execution |
| Suite Teardown Suite Teardown Execution |
| Test Setup Printn |
| Test Teardown FFDC On Test Case Fail |
| |
| |
| *** Variables *** |
| |
| @{ADMIN} admin_user TestPwd123 |
| @{OPERATOR} operator_user TestPwd123 |
| # User-driven input parameter to skip operator user. |
| # -v SKIP_OPERATOR_USER:1 to skip from CLI. |
| ${SKIP_OPERATOR_USER} ${0} |
| |
| |
| *** Test Cases *** |
| |
| Create Session And Verify Response Code Using Different Credentials |
| [Documentation] Create session and verify response code using different credentials. |
| [Tags] Create_Session_And_Verify_Response_Code_Using_Different_Credentials |
| [Template] Create Session And Verify Response Code |
| |
| # username password valid_status_code |
| ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} ${HTTP_CREATED} |
| r00t ${OPENBMC_PASSWORD} ${HTTP_UNAUTHORIZED} |
| ${OPENBMC_USERNAME} password ${HTTP_UNAUTHORIZED} |
| r00t password ${HTTP_UNAUTHORIZED} |
| admin_user TestPwd123 ${HTTP_CREATED} |
| |
| |
| Create Session And Verify Response Code Using Operator Credentials |
| [Documentation] Create session and verify response code using operator credentials. |
| [Tags] Create_Session_And_Verify_Response_Code_Using_Operator_Credentials |
| [Template] Create Session And Verify Response Code |
| |
| # username password valid_status_code |
| operator_user TestPwd123 ${HTTP_CREATED} |
| |
| |
| Set Session Timeout And Verify Response Code |
| [Documentation] Set Session Timeout And Verify Response Code. |
| [Tags] Set_Session_Timeout_And_Verify_Response_Code |
| [Template] Set Session Timeout And Verify |
| [Teardown] Set Session Timeout And Verify ${Default_Timeout_Value} ${HTTP_OK} |
| |
| # The minimum & maximum allowed values for session timeout are 30 |
| # seconds and 86400 seconds respectively as per the session service |
| # schema mentioned at |
| # https://redfish.dmtf.org/schemas/v1/SessionService.v1_1_7.json |
| |
| # value valid_status_code |
| ${25} ${HTTP_BAD_REQUEST} |
| ${30} ${HTTP_OK} |
| ${3600} ${HTTP_OK} |
| ${86400} ${HTTP_OK} |
| ${86500} ${HTTP_BAD_REQUEST} |
| |
| |
| Set Session Timeout And Verify Session After Timeout |
| [Documentation] Set timeout for session service and verify session is deleted after timeout. |
| [Tags] Set_Session_Timeout_And_Verify_Session_After_Timeout |
| [Teardown] Set Session Timeout And Verify ${Default_Timeout_Value} ${HTTP_OK} |
| [Template] Set Session Timeout And Verify Session Deleted After Timeout |
| |
| #timeout Value |
| ${30} |
| ${300} |
| |
| |
| Verify Session Login And Logout For Newly Created User |
| [Documentation] Verify able to login and logout using the session created for new user. |
| [Tags] Verify_Session_Login_And_Logout_For_Newly_Created_User |
| [Teardown] Redfish.Login |
| |
| # Logout already created redfish session. |
| Redfish.Logout |
| Redfish.Login ${ADMIN}[0] ${ADMIN}[1] |
| ${systems}= Redfish.Get Properties /redfish/v1/Systems |
| Rprint Vars systems |
| Redfish.Logout |
| ${systems}= Redfish.Get /redfish/v1/Systems |
| ... valid_status_codes=[${HTTP_UNAUTHORIZED}] |
| |
| |
| Verify SessionService Defaults |
| [Documentation] Verify SessionService default property values. |
| [Tags] Verify_SessionService_Defaults |
| |
| ${session_service}= Redfish.Get Properties /redfish/v1/SessionService |
| Rprint Vars session_service |
| |
| Valid Value session_service['@odata.id'] ['/redfish/v1/SessionService/'] |
| Valid Value session_service['Description'] ['Session Service'] |
| Valid Value session_service['Id'] ['SessionService'] |
| Valid Value session_service['Name'] ['Session Service'] |
| Valid Value session_service['ServiceEnabled'] [True] |
| Valid Value session_service['SessionTimeout'] [${Default_Timeout_Value}] |
| Valid Value session_service['Sessions']['@odata.id'] ['/redfish/v1/SessionService/Sessions'] |
| |
| |
| Verify Sessions Defaults |
| [Documentation] Verify Sessions default property values. |
| [Tags] Verify_Sessions_Defaults |
| |
| ${sessions}= Redfish.Get Properties /redfish/v1/SessionService/Sessions |
| Rprint Vars sessions |
| ${sessions_count}= Get length ${sessions['Members']} |
| |
| Valid Value sessions['@odata.id'] ['/redfish/v1/SessionService/Sessions/'] |
| Valid Value sessions['Description'] ['Session Collection'] |
| Valid Value sessions['Name'] ['Session Collection'] |
| Valid Value sessions['Members@odata.count'] [${sessions_count}] |
| |
| |
| Verify Current Session Defaults |
| [Documentation] Verify Current session default property values. |
| [Tags] Verify_Current_Session_Defaults |
| |
| ${session_location}= Redfish.Get Session Location |
| ${session_id}= Evaluate os.path.basename($session_location) modules=os |
| ${session_properties}= Redfish.Get Properties /redfish/v1/SessionService/Sessions/${session_id} |
| Rprint Vars session_location session_id session_properties |
| |
| Valid Value session_properties['@odata.id'] ['/redfish/v1/SessionService/Sessions/${session_id}'] |
| Valid Value session_properties['Description'] ['Manager User Session'] |
| Valid Value session_properties['Name'] ['User Session'] |
| Valid Value session_properties['Id'] ['${session_id}'] |
| Valid Value session_properties['UserName'] ['${OPENBMC_USERNAME}'] |
| |
| |
| Verify Managers Defaults |
| [Documentation] Verify managers defaults. |
| [Tags] Verify_Managers_Defaults |
| |
| ${managers}= Redfish.Get Properties /redfish/v1/Managers |
| Rprint Vars managers |
| ${managers_count}= Get Length ${managers['Members']} |
| |
| Valid Value managers['Name'] ['Manager Collection'] |
| Valid Value managers['@odata.id'] ['/redfish/v1/Managers'] |
| Valid Value managers['Members@odata.count'] [${managers_count}] |
| |
| # Members can be one or more, hence checking in the list. |
| Valid List managers['Members'] required_values=[{'@odata.id': '/redfish/v1/Managers/${MANAGER_ID}'}] |
| |
| |
| Verify Chassis Defaults |
| [Documentation] Verify chassis defaults. |
| [Tags] Verify_Chassis_Defaults |
| |
| ${chassis}= Redfish.Get Properties /redfish/v1/Chassis |
| Rprint Vars chassis |
| ${chassis_count}= Get Length ${chassis['Members']} |
| |
| Valid Value chassis['Name'] ['Chassis Collection'] |
| Valid Value chassis['@odata.id'] ['/redfish/v1/Chassis'] |
| Valid Value chassis['Members@odata.count'] [${chassis_count}] |
| Valid Value chassis['Members@odata.count'] [${chassis_count}] |
| |
| # Members can be one or more, hence checking in the list. |
| Valid List chassis['Members'] |
| ... required_values=[{'@odata.id': '/redfish/v1/Chassis/${CHASSIS_ID}'}] |
| |
| |
| Verify Systems Defaults |
| [Documentation] Verify systems defaults. |
| [Tags] Verify_Systems_Defaults |
| |
| ${systems}= Redfish.Get Properties /redfish/v1/Systems |
| Rprint Vars systems |
| ${systems_count}= Get Length ${systems['Members']} |
| Valid Value systems['Name'] ['Computer System Collection'] |
| Valid Value systems['@odata.id'] ['/redfish/v1/Systems'] |
| Valid Value systems['Members@odata.count'] [${systems_count}] |
| Valid Value systems['Members@odata.count'] [${systems_count}] |
| # Members can be one or more, hence checking in the list. |
| Valid List systems['Members'] required_values=[{'@odata.id': '/redfish/v1/Systems/system'}] |
| |
| |
| Verify Session Persistency After BMC Reboot |
| [Documentation] Verify session persistency after BMC reboot. |
| [Tags] Verify_Session_Persistency_After_BMC_Reboot |
| |
| # Note the current session location. |
| ${session_location}= Redfish.Get Session Location |
| |
| Redfish OBMC Reboot (off) stack_mode=normal |
| |
| # Check for session persistency after BMC reboot. |
| # sessions here will have list of all sessions location. |
| ${sessions}= Redfish.Get Attribute /redfish/v1/SessionService/Sessions Members |
| ${payload}= Create Dictionary @odata.id=${session_location} |
| |
| List Should Contain Value ${sessions} ${payload} |
| |
| *** Keywords *** |
| |
| Create Session And Verify Response Code |
| [Documentation] Create session and verify response code. |
| [Arguments] ${username}=${OPENBMC_USERNAME} ${password}=${OPENBMC_PASSWORD} |
| ... ${valid_status_code}=${HTTP_CREATED} |
| |
| # Description of argument(s): |
| # username The username to create a session. |
| # password The password to create a session. |
| # valid_status_code Expected response code, default is ${HTTP_CREATED}. |
| |
| ${resp}= Redfish.Post /redfish/v1/SessionService/Sessions |
| ... body={'UserName':'${username}', 'Password': '${password}'} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| |
| Set Session Timeout And Verify |
| [Documentation] Set Session Timeout And Verify. |
| [Arguments] ${value}=3600 ${valid_status_code}=${HTTP_OK} |
| |
| # Description of argument(s): |
| # value The value to patch session timeout. |
| # valid_status_code Expected response code, default is ${HTTP_OK}. |
| |
| Redfish.Login |
| ${data}= Create Dictionary SessionTimeout=${value} |
| Redfish.Patch ${REDFISH_BASE_URI}SessionService |
| ... body=&{data} |
| ... valid_status_codes=[${valid_status_code}] |
| |
| ${session_timeout}= Redfish.Get Attribute |
| ... ${REDFISH_BASE_URI}SessionService SessionTimeout |
| |
| Run Keyword If ${valid_status_code}==${HTTP_OK} |
| ... Valid Value session_timeout [${value}] |
| |
| |
| Create Session And Check Session Timeout |
| [Documentation] Create session and check session timeout. |
| [Arguments] ${value} |
| |
| # Description of argument(s): |
| # value timeout value in integer to be configured. |
| |
| ${resp}= Redfish.Post /redfish/v1/SessionService/Sessions |
| ... body={'UserName':'${OPENBMC_USERNAME}', 'Password': '${OPENBMC_PASSWORD}'} |
| ... valid_status_codes=[${HTTP_CREATED}] |
| ${session_id}= Set Variable ${resp.dict['@odata.id']} |
| Sleep ${value}s |
| |
| Redfish.Get ${REDFISH_SESSION} valid_status_codes=[${HTTP_UNAUTHORIZED}] |
| # Since sessions will deleted so logging again. |
| Redfish.login |
| ${session_list}= Redfish.Get Members List /redfish/v1/SessionService/Sessions |
| |
| List Should Not Contain Value ${session_list} ${session_id} |
| |
| |
| Set Session Timeout And Verify Session Deleted After Timeout |
| [Documentation] Set timeout for session service and verify session is deleted after timeout. |
| [Arguments] ${timeout_value} |
| |
| # Description of argument(s): |
| # timeout_value timeout value in integer to be configured. |
| |
| ${data}= Create Dictionary SessionTimeout=${timeout_value} |
| ${resp_patch}= Redfish.Patch /redfish/v1/SessionService |
| ... body=&{data} valid_status_codes=[${HTTP_OK}] |
| Create Session And Check Session Timeout ${timeout_value} |
| |
| |
| Get Default Timeout Value |
| [Documentation] Get default session timeout value and set as a suite variable. |
| |
| ${Default_Timeout_Value}= Redfish.Get Attribute /redfish/v1/SessionService SessionTimeout |
| Set Suite Variable ${Default_Timeout_Value} |
| |
| |
| Suite Setup Execution |
| [Documentation] Suite Setup Execution. |
| |
| Redfish.Login |
| |
| # Skip operator user if SKIP_OPERATOR_USER is 1. |
| Run Keyword If |
| ... ${SKIP_OPERATOR_USER} == ${1} |
| ... Set Suite Variable &{USERS} Administrator=${ADMIN} |
| ... ELSE |
| ... Set Suite Variable &{USERS} Administrator=${ADMIN} Operator=${OPERATOR} |
| |
| Create Users With Different Roles users=${USERS} force=${True} |
| Get Default Timeout Value |
| |
| |
| Suite Teardown Execution |
| [Documentation] Suite teardown execution. |
| |
| Delete BMC Users Via Redfish users=${USERS} |
| Run Keyword And Ignore Error Delete All Redfish Sessions |
| Redfish.Logout |