blob: d4f50e20e32f9e80da0b96fa24567a7bb0fa436d [file] [log] [blame]
*** Settings ***
Documentation Test Redfish LDAP user configuration.
Library ../../lib/gen_robot_valid.py
Resource ../../lib/resource.robot
Resource ../../lib/bmc_redfish_resource.robot
Resource ../../lib/openbmc_ffdc.robot
Library ../../lib/gen_robot_valid.py
Resource ../../lib/bmc_network_utils.robot
Suite Setup Suite Setup Execution
Suite Teardown Run Keywords Restore LDAP Privilege AND Redfish.Logout
Test Teardown FFDC On Test Case Fail
Force Tags LDAP_Test
*** Variables ***
${old_ldap_privilege} ${EMPTY}
&{old_account_service} &{EMPTY}
&{old_ldap_config} &{EMPTY}
${hostname} ${EMPTY}
${test_ip} 10.6.6.6
${test_mask} 255.255.255.0
** Test Cases **
Verify LDAP Configuration Created
[Documentation] Verify that LDAP configuration created.
[Tags] Verify_LDAP_Configuration_Created
Create LDAP Configuration
# Call 'Get LDAP Configuration' to verify that LDAP configuration exists.
Get LDAP Configuration ${LDAP_TYPE}
Sleep 10s
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP Service Disable
[Documentation] Verify that LDAP is disabled and that LDAP user cannot
... login.
[Tags] Verify_LDAP_Service_Disable
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${LDAP_TYPE}': {'ServiceEnabled': ${False}}}
Sleep 15s
${resp}= Run Keyword And Return Status Redfish.Login ${LDAP_USER}
... ${LDAP_USER_PASSWORD}
Should Be Equal ${resp} ${False}
... msg=LDAP user was able to login even though the LDAP service was disabled.
Redfish.Logout
Redfish.Login
# Enabling LDAP so that LDAP user works.
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}}
Redfish.Logout
Redfish.Login
Verify LDAP Login With ServiceEnabled
[Documentation] Verify that LDAP Login with ServiceEnabled.
[Tags] Verify_LDAP_Login_With_ServiceEnabled
Disable Other LDAP
# Actual service enablement.
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}}
Sleep 15s
# After update, LDAP login.
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP Login With Correct AuthenticationType
[Documentation] Verify that LDAP Login with right AuthenticationType.
[Tags] Verify_LDAP_Login_With_Correct_AuthenticationType
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${ldap_type}': {'Authentication': {'AuthenticationType':'UsernameAndPassword'}}}
Sleep 15s
# After update, LDAP login.
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP Config Update With Incorrect AuthenticationType
[Documentation] Verify that invalid AuthenticationType is not updated.
[Tags] Verify_LDAP_Update_With_Incorrect_AuthenticationType
${body}= Catenate {'${ldap_type}': {'Authentication': {'AuthenticationType':'KerberosKeytab'}}}
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body=${body} valid_status_codes=[400]
Verify LDAP Login With Correct LDAP URL
[Documentation] Verify LDAP Login with right LDAP URL.
[Tags] Verify_LDAP_Login_With_Correct_LDAP_URL
Config LDAP URL ${LDAP_SERVER_URI}
Verify LDAP Config Update With Incorrect LDAP URL
[Documentation] Verify that LDAP Login fails with invalid LDAP URL.
[Tags] Verify_LDAP_Config_Update_With_Incorrect_LDAP_URL
[Teardown] Run Keywords Restore LDAP URL AND
... FFDC On Test Case Fail
Config LDAP URL ldap://1.2.3.4/ ${FALSE}
Verify LDAP Configuration Exist
[Documentation] Verify that LDAP configuration is available.
[Tags] Verify_LDAP_Configuration_Exist
${resp}= Redfish.Get Attribute ${REDFISH_BASE_URI}AccountService
... ${LDAP_TYPE} default=${EMPTY}
Should Not Be Empty ${resp} msg=LDAP configuration is not defined.
Verify LDAP User Login
[Documentation] Verify that LDAP user able to login into BMC.
[Tags] Verify_LDAP_User_Login
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP Service Available
[Documentation] Verify that LDAP service is available.
[Tags] Verify_LDAP_Service_Available
@{ldap_configuration}= Get LDAP Configuration ${LDAP_TYPE}
Should Contain ${ldap_configuration} LDAPService
... msg=LDAPService is not available.
Verify LDAP Login Works After BMC Reboot
[Documentation] Verify that LDAP login works after BMC reboot.
[Tags] Verify_LDAP_Login_Works_After_BMC_Reboot
Redfish OBMC Reboot (off)
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP User With Admin Privilege Able To Do BMC Reboot
[Documentation] Verify that LDAP user with administrator privilege able to do BMC reboot.
[Tags] Verify_LDAP_User_With_Admin_Privilege_Able_To_Do_BMC_Reboot
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... ${GROUP_PRIVILEGE} ${GROUP_NAME}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
# With LDAP user and with right privilege trying to do BMC reboot.
Redfish OBMC Reboot (off)
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Logout
Redfish.Login
Verify LDAP User With Operator Privilege Able To Do Host Poweroff
[Documentation] Verify that LDAP user with operator privilege can do host
... power off.
[Tags] Verify_LDAP_User_With_Operator_Privilege_Able_To_Do_Host_Poweroff
[Teardown] Restore LDAP Privilege
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... Operator ${GROUP_NAME}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
# Verify that the LDAP user with operator privilege is able to power the system off.
Redfish.Post ${REDFISH_POWER_URI}
... body={'ResetType': 'ForceOff'} valid_status_codes=[200]
Redfish.Logout
Redfish.Login
Verify AccountLockout Attributes Set To Zero
[Documentation] Verify that attribute AccountLockoutDuration and
... AccountLockoutThreshold are set to 0.
[Teardown] Run Keywords Restore AccountLockout Attributes AND
... FFDC On Test Case Fail
[Tags] Verify_AccountLockout_Attributes_Set_To_Zero
${old_account_service}= Redfish.Get Properties
... ${REDFISH_BASE_URI}AccountService
Rprint Vars old_account_service
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body=[('AccountLockoutDuration', 0)]
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body=[('AccountLockoutThreshold', 0)]
Verify LDAP User With Read Privilege Able To Check Inventory
[Documentation] Verify that LDAP user with read privilege able to
... read firmware inventory.
[Tags] Verify_LDAP_User_With_Read_Privilege_Able_To_Check_Inventory
[Teardown] Run Keywords FFDC On Test Case Fail AND Restore LDAP Privilege
[Template] Set Read Privilege And Check Firmware Inventory
ReadOnly
Verify LDAP User With Read Privilege Should Not Do Host Poweron
[Documentation] Verify that LDAP user with read privilege should not be
... allowed to power on the host.
[Tags] Verify_LDAP_User_With_Read_Privilege_Should_Not_Do_Host_Poweron
[Teardown] Run Keywords FFDC On Test Case Fail AND Restore LDAP Privilege
[Template] Set Read Privilege And Check Poweron
ReadOnly
Update LDAP Group Name And Verify Operations
[Documentation] Verify that LDAP group name update and able to do right
... operations.
[Tags] Update_LDAP_Group_Name_And_Verify_Operations
[Template] Update LDAP Config And Verify Set Host Name
[Teardown] Restore LDAP Privilege
# group_name group_privilege valid_status_codes
${GROUP_NAME} Administrator [${HTTP_OK}, ${HTTP_NO_CONTENT}]
${GROUP_NAME} Operator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
${GROUP_NAME} ReadOnly [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
${GROUP_NAME} NoAccess [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
Invalid_LDAP_Group_Name Administrator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
Invalid_LDAP_Group_Name Operator [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
Invalid_LDAP_Group_Name ReadOnly [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
Invalid_LDAP_Group_Name NoAccess [${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]
Verify LDAP BaseDN Update And LDAP Login
[Documentation] Update LDAP BaseDN of LDAP configuration and verify
... that LDAP login works.
[Tags] Verify_LDAP_BaseDN_Update_And_LDAP_Login
${body}= Catenate {'${LDAP_TYPE}': { 'LDAPService': {'SearchSettings':
... {'BaseDistinguishedNames': ['${LDAP_BASE_DN}']}}}}
Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body}
Sleep 15s
Redfish Verify LDAP Login
Verify LDAP BindDN Update And LDAP Login
[Documentation] Update LDAP BindDN of LDAP configuration and verify
... that LDAP login works.
[Tags] Verify_LDAP_BindDN_Update_And_LDAP_Login
${body}= Catenate {'${LDAP_TYPE}': { 'Authentication':
... {'AuthenticationType':'UsernameAndPassword', 'Username':
... '${LDAP_BIND_DN}'}}}
Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body}
Sleep 15s
Redfish Verify LDAP Login
Verify LDAP BindDN Password Update And LDAP Login
[Documentation] Update LDAP BindDN password of LDAP configuration and
... verify that LDAP login works.
[Tags] Verify_LDAP_BindDN_Passsword_Update_And_LDAP_Login
${body}= Catenate {'${LDAP_TYPE}': { 'Authentication':
... {'AuthenticationType':'UsernameAndPassword', 'Password':
... '${LDAP_BIND_DN_PASSWORD}'}}}
Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body}
Sleep 15s
Redfish Verify LDAP Login
Verify LDAP Type Update And LDAP Login
[Documentation] Update LDAP type of LDAP configuration and verify
... that LDAP login works.
[Tags] Verify_LDAP_Type_Update_And_LDAP_Login
Disable Other LDAP
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${LDAP_TYPE}': {'ServiceEnabled': ${True}}}
Sleep 15s
Redfish Verify LDAP Login
Verify Authorization With Null Privilege
[Documentation] Verify the failure of LDAP authorization with empty
... privilege.
[Tags] Verify_LDAP_Authorization_With_Null_Privilege
[Teardown] Restore LDAP Privilege
Update LDAP Config And Verify Set Host Name ${GROUP_NAME} ${EMPTY}
... [${HTTP_FORBIDDEN}]
Verify Authorization With Invalid Privilege
[Documentation] Verify that LDAP user authorization with wrong privilege
... fails.
[Tags] Verify_LDAP_Authorization_With_Invalid_Privilege
[Teardown] Restore LDAP Privilege
Update LDAP Config And Verify Set Host Name ${GROUP_NAME}
... Invalid_Privilege [${HTTP_FORBIDDEN}]
Verify LDAP Login With Invalid Data
[Documentation] Verify that LDAP login with Invalid LDAP data and
... right LDAP user fails.
[Tags] Verify_LDAP_Login_With_Invalid_Data
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} Invalid_LDAP_Server_URI
... Invalid_LDAP_BIND_DN LDAP_BIND_DN_PASSWORD
... Invalid_LDAP_BASE_DN
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify LDAP Config Creation Without BASE_DN
[Documentation] Verify that LDAP login with LDAP configuration
... created without BASE_DN fails.
[Tags] Verify_LDAP_Config_Creation_Without_BASE_DN
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} Invalid_LDAP_Server_URI
... Invalid_LDAP_BIND_DN LDAP_BIND_DN_PASSWORD ${EMPTY}
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify LDAP Authentication Without Password
[Documentation] Verify that LDAP user authentication without LDAP
... user password fails.
[Tags] Verify_LDAP_Authentication_Without_Password
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login
${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER}
Valid Value status [${False}]
Verify LDAP Login With Invalid BASE_DN
[Documentation] Verify that LDAP login with invalid BASE_DN and
... valid LDAP user fails.
[Tags] Verify_LDAP_Login_With_Invalid_BASE_DN
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI}
... ${LDAP_BIND_DN} ${LDAP_BIND_DN_PASSWORD} Invalid_LDAP_BASE_DN
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify LDAP Login With Invalid BIND_DN_PASSWORD
[Documentation] Verify that LDAP login with invalid BIND_DN_PASSWORD and
... valid LDAP user fails.
[Tags] Verify_LDAP_Login_With_Invalid_BIND_DN_PASSWORD
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI}
... ${LDAP_BIND_DN} INVALID_LDAP_BIND_DN_PASSWORD ${LDAP_BASE_DN}
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify LDAP Login With Invalid BASE_DN And Invalid BIND_DN
[Documentation] Verify that LDAP login with invalid BASE_DN and invalid
... BIND_DN and valid LDAP user fails.
[Tags] Verify_LDAP_Login_With_Invalid_BASE_DN_And_Invalid_BIND_DN
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI}
... INVALID_LDAP_BIND_DN ${LDAP_BIND_DN_PASSWORD} INVALID_LDAP_BASE_DN
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify Group Name And Group Privilege Able To Modify
[Documentation] Verify that LDAP group name and group privilege able to
... modify.
[Tags] Verify_Group_Name_And_Group_Privilege_Able_To_Modify
[Setup] Update LDAP Configuration with LDAP User Role And Group
... ${LDAP_TYPE} Operator ${GROUP_NAME}
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... Administrator ${GROUP_NAME}
Verify LDAP Login With Invalid BIND_DN
[Documentation] Verify that LDAP login with invalid BIND_DN and
... valid LDAP user fails.
[Tags] Verify_LDAP_Login_With_Invalid_BIND_DN
[Teardown] Run Keywords FFDC On Test Case Fail AND
... Create LDAP Configuration
Create LDAP Configuration ${LDAP_TYPE} ${LDAP_SERVER_URI}
... Invalid_LDAP_BIND_DN ${LDAP_BIND_DN_PASSWORD} ${LDAP_BASE_DN}
Sleep 15s
Redfish Verify LDAP Login ${False}
Verify LDAP Authentication With Invalid LDAP User
[Documentation] Verify that LDAP user authentication for user not exist
... in LDAP server and fails.
[Tags] Verify_LDAP_Authentication_With_Invalid_LDAP_User
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login
${status}= Run Keyword And Return Status Redfish.Login INVALID_LDAP_USER
... ${LDAP_USER_PASSWORD}
Valid Value status [${False}]
Update LDAP User Roles And Verify Host Poweroff Operation
[Documentation] Update LDAP user roles and verify host poweroff operation.
[Tags] Update_LDAP_User_Roles_And_Verify_Host_Poweroff_Operation
[Teardown] Restore LDAP Privilege
[Template] Update LDAP User Role And Host Poweroff
# ldap_type group_privilege group_name valid_status_codes
# Verify LDAP user with NoAccess privilege not able to do host poweroff.
${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with ReadOnly privilege not able to do host poweroff.
${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with Operator privilege able to do host poweroff.
${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK}
# Verify LDAP user with Administrator privilege able to do host poweroff.
${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK}
Update LDAP User Roles And Verify Host Poweron Operation
[Documentation] Update LDAP user roles and verify host poweron operation.
[Tags] Update_LDAP_User_Roles_And_Verify_Host_Poweron_Operation
[Teardown] Restore LDAP Privilege
[Template] Update LDAP User Role And Host Poweron
# ldap_type group_privilege group_name valid_status_codes
# Verify LDAP user with NoAccess privilege not able to do host poweron.
${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with ReadOnly privilege not able to do host poweron.
${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with Operator privilege able to do host poweron.
${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK}
# Verify LDAP user with Administrator privilege able to do host poweron.
${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK}
Configure IP Address Via Different User Roles And Verify
[Documentation] Configure IP address via different user roles and verify.
[Tags] Configure_IP_Address_Via_Different_User_Roles_And_Verify
[Teardown] Restore LDAP Privilege
[Template] Update LDAP User Role And Configure IP Address
# Verify LDAP user with Administrator privilege is able to configure IP address.
${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK}
# Verify LDAP user with ReadOnly privilege is forbidden to configure IP address.
${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with NoAccess privilege is forbidden to configure IP address.
${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with Operator privilege is able to configure IP address.
${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK}
Delete IP Address Via Different User Roles And Verify
[Documentation] Delete IP address via different user roles and verify.
[Tags] Delete_IP_Address_Via_Different_User_Roles_And_Verify
[Teardown] Run Keywords Restore LDAP Privilege AND FFDC On Test Case Fail
[Template] Update LDAP User Role And Delete IP Address
# Verify LDAP user with Administrator privilege is able to delete IP address.
${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK}
# Verify LDAP user with ReadOnly privilege is forbidden to delete IP address.
${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with NoAccess privilege is forbidden to delete IP address.
${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN}
# Verify LDAP user with Operator privilege is able to delete IP address.
${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK}
Read Network Configuration Via Different User Roles And Verify
[Documentation] Read network configuration via different user roles and verify.
[Tags] Read_Network_configuration_Via_Different_User_Roles_And_Verify
[Teardown] Restore LDAP Privilege
[Template] Update LDAP User Role And Read Network Configuration
${LDAP_TYPE} Administrator ${GROUP_NAME} ${HTTP_OK}
${LDAP_TYPE} ReadOnly ${GROUP_NAME} ${HTTP_OK}
${LDAP_TYPE} NoAccess ${GROUP_NAME} ${HTTP_FORBIDDEN}
${LDAP_TYPE} Operator ${GROUP_NAME} ${HTTP_OK}
*** Keywords ***
Redfish Verify LDAP Login
[Documentation] LDAP user log into BMC.
[Arguments] ${valid_status}=${True}
# Description of argument(s):
# valid_status Expected status of LDAP login ("True" or "False").
# According to our repo coding rules, Redfish.Login is to be done in Suite
# Setup and Redfish.Logout is to be done in Suite Teardown. For any
# deviation from this rule (such as in this keyword), the deviant code
# must take steps to restore us to our original logged-in state.
${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER}
... ${LDAP_USER_PASSWORD}
Valid Value status [${valid_status}]
Redfish.Logout
Redfish.Login
Update LDAP Config And Verify Set Host Name
[Documentation] Update LDAP config and verify by attempting to set host name.
[Arguments] ${group_name} ${group_privilege}=Administrator
... ${valid_status_codes}=[${HTTP_OK}]
# Description of argument(s):
# group_name The group name of user.
# group_privilege The group privilege ("Administrator",
# "Operator", "User" or "Callback").
# valid_status_codes Expected return code(s) from patch
# operation (e.g. "200") used to update
# HostName. See prolog of rest_request
# method in redfish_plut.py for details.
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... ${group_privilege} ${group_name}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
# Verify that the LDAP user in ${group_name} with the given privilege is
# allowed to change the hostname.
Redfish.Patch ${REDFISH_NW_ETH0_URI} body={'HostName': '${hostname}'}
... valid_status_codes=${valid_status_codes}
Redfish.Logout
Redfish.Login
Disable Other LDAP
[Documentation] Disable other LDAP configuration.
# First disable other LDAP.
${inverse_ldap_type}= Set Variable If '${LDAP_TYPE}' == 'LDAP' ActiveDirectory LDAP
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${inverse_ldap_type}': {'ServiceEnabled': ${False}}}
Sleep 15s
Create LDAP Configuration
[Documentation] Create LDAP configuration.
[Arguments] ${ldap_type}=${LDAP_TYPE} ${ldap_server_uri}=${LDAP_SERVER_URI}
... ${ldap_bind_dn}=${LDAP_BIND_DN} ${ldap_bind_dn_password}=${LDAP_BIND_DN_PASSWORD}
... ${ldap_base_dn}=${LDAP_BASE_DN}
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# ldap_server_uri LDAP server uri (e.g. ldap://XX.XX.XX.XX).
# ldap_bind_dn The LDAP bind distinguished name.
# ldap_bind_dn_password The LDAP bind distinguished name password.
# ldap_base_dn The LDAP base distinguished name.
${body}= Catenate {'${ldap_type}':
... {'ServiceEnabled': ${True},
... 'ServiceAddresses': ['${ldap_server_uri}'],
... 'Authentication':
... {'AuthenticationType': 'UsernameAndPassword',
... 'Username':'${ldap_bind_dn}',
... 'Password': '${ldap_bind_dn_password}'},
... 'LDAPService':
... {'SearchSettings':
... {'BaseDistinguishedNames': ['${ldap_base_dn}']}}}}
Redfish.Patch ${REDFISH_BASE_URI}AccountService body=${body}
Sleep 15s
Config LDAP URL
[Documentation] Config LDAP URL.
[Arguments] ${ldap_server_uri}=${LDAP_SERVER_URI} ${expected_status}=${TRUE}
# Description of argument(s):
# ldap_server_uri LDAP server uri (e.g. "ldap://XX.XX.XX.XX/").
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${ldap_type}': {'ServiceAddresses': ['${ldap_server_uri}']}}
Sleep 15s
# After update, LDAP login.
${status}= Run Keyword And Return Status Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Valid Value status [${expected_status}]
Redfish.Logout
Redfish.Login
Restore LDAP URL
[Documentation] Restore LDAP URL.
# Restoring the working LDAP server uri.
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body={'${ldap_type}': {'ServiceAddresses': ['${LDAP_SERVER_URI}']}}
Sleep 15s
Restore AccountLockout Attributes
[Documentation] Restore AccountLockout Attributes.
Return From Keyword If &{old_account_service} == &{EMPTY}
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body=[('AccountLockoutDuration', ${old_account_service['AccountLockoutDuration']})]
Redfish.Patch ${REDFISH_BASE_URI}AccountService
... body=[('AccountLockoutDuration', ${old_account_service['AccountLockoutThreshold']})]
Suite Setup Execution
[Documentation] Do suite setup tasks.
Valid Value LDAP_TYPE valid_values=["ActiveDirectory", "LDAP"]
Valid Value LDAP_USER
Valid Value LDAP_USER_PASSWORD
Valid Value GROUP_PRIVILEGE
Valid Value GROUP_NAME
Valid Value LDAP_SERVER_URI
Valid Value LDAP_BIND_DN_PASSWORD
Valid Value LDAP_BIND_DN
Valid Value LDAP_BASE_DN
Redfish.Login
# Call 'Get LDAP Configuration' to verify that LDAP configuration exists.
Get LDAP Configuration ${LDAP_TYPE}
${old_ldap_privilege}= Get LDAP Privilege
Set Suite Variable ${old_ldap_privilege}
Disable Other LDAP
Create LDAP Configuration
${hostname}= Redfish.Get Attribute ${REDFISH_NW_PROTOCOL_URI} HostName
Set Read Privilege And Check Firmware Inventory
[Documentation] Set read privilege and check firmware inventory.
[Arguments] ${read_privilege}
# Description of argument(s):
# read_privilege The read privilege role (e.g. "User" / "Callback").
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... ${read_privilege} ${GROUP_NAME}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
# Verify that the LDAP user with read privilege is able to read inventory.
${resp}= Redfish.Get /redfish/v1/UpdateService/FirmwareInventory
Should Be True ${resp.dict["Members@odata.count"]} >= ${1}
Length Should Be ${resp.dict["Members"]} ${resp.dict["Members@odata.count"]}
Redfish.Logout
Redfish.Login
Set Read Privilege And Check Poweron
[Documentation] Set read privilege and power on should not be possible.
[Arguments] ${read_privilege}
# Description of argument(s):
# read_privilege The read privilege role (e.g. "User" / "Callback").
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... ${read_privilege} ${GROUP_NAME}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Post ${REDFISH_POWER_URI}
... body={'ResetType': 'On'} valid_status_codes=[401, 403]
Redfish.Logout
Redfish.Login
Get LDAP Configuration
[Documentation] Retrieve LDAP Configuration.
[Arguments] ${ldap_type}
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
${ldap_config}= Redfish.Get Properties ${REDFISH_BASE_URI}AccountService
[Return] ${ldap_config["${ldap_type}"]}
Update LDAP Configuration with LDAP User Role And Group
[Documentation] Update LDAP configuration update with LDAP user Role and group.
[Arguments] ${ldap_type} ${group_privilege} ${group_name}
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "User" or "Callback").
# group_name The group name of user.
${local_role_remote_group}= Create Dictionary LocalRole=${group_privilege} RemoteGroup=${group_name}
${remote_role_mapping}= Create List ${local_role_remote_group}
${ldap_data}= Create Dictionary RemoteRoleMapping=${remote_role_mapping}
${payload}= Create Dictionary ${ldap_type}=${ldap_data}
Redfish.Patch ${REDFISH_BASE_URI}AccountService body=&{payload}
# Provide adequate time for LDAP daemon to restart after the update.
Sleep 15s
Get LDAP Privilege
[Documentation] Get LDAP privilege and return it.
${ldap_config}= Get LDAP Configuration ${LDAP_TYPE}
${num_list_entries}= Get Length ${ldap_config["RemoteRoleMapping"]}
Return From Keyword If ${num_list_entries} == ${0} @{EMPTY}
[Return] ${ldap_config["RemoteRoleMapping"][0]["LocalRole"]}
Restore LDAP Privilege
[Documentation] Restore the LDAP privilege to its original value.
Return From Keyword If '${old_ldap_privilege}' == '${EMPTY}' or '${old_ldap_privilege}' == '[]'
# Log back in to restore the original privilege.
Update LDAP Configuration with LDAP User Role And Group ${LDAP_TYPE}
... ${old_ldap_privilege} ${GROUP_NAME}
Sleep 18s
Update LDAP User Role And Host Poweroff
[Documentation] Update LDAP user role and do host poweroff.
[Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess").
# group_name The group name of user.
# valid_status_code The expected valid status code.
Update LDAP Configuration with LDAP User Role And Group ${ldap_type}
... ${group_privilege} ${group_name}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Post ${REDFISH_POWER_URI}
... body={'ResetType': 'ForceOff'} valid_status_codes=[${valid_status_code}]
Update LDAP User Role And Host Poweron
[Documentation] Update LDAP user role and do host poweron.
[Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess").
# group_name The group name of user.
# valid_status_code The expected valid status code.
Update LDAP Configuration with LDAP User Role And Group ${ldap_type}
... ${group_privilege} ${group_name}
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Post ${REDFISH_POWER_URI}
... body={'ResetType': 'On'} valid_status_codes=[${valid_status_code}]
Update LDAP User Role And Configure IP Address
[Documentation] Update LDAP user role and configure IP address.
[Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK}
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login AND Delete IP Address ${test_ip}
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess").
# group_name The group name of user.
# valid_status_code The expected valid status code.
Update LDAP Configuration with LDAP User Role And Group ${ldap_type}
... ${group_privilege} ${group_name}
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
${test_gateway}= Get BMC Default Gateway
Add IP Address ${test_ip} ${test_mask} ${test_gateway} ${valid_status_code}
Update LDAP User Role And Delete IP Address
[Documentation] Update LDAP user role and delete IP address.
[Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK}
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login AND Delete IP Address ${test_ip}
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess").
# group_name The group name of user.
# valid_status_code The expected valid status code.
${test_gateway}= Get BMC Default Gateway
# Configure IP address before deleting via LDAP user roles.
Add IP Address ${test_ip} ${test_mask} ${test_gateway}
Update LDAP Configuration with LDAP User Role And Group ${ldap_type}
... ${group_privilege} ${group_name}
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Delete IP Address ${test_ip} ${valid_status_code}
Update LDAP User Role And Read Network Configuration
[Documentation] Update LDAP user role and read network configuration.
[Arguments] ${ldap_type} ${group_privilege} ${group_name} ${valid_status_code}=${HTTP_OK}
[Teardown] Run Keywords Redfish.Logout AND Redfish.Login
# Description of argument(s):
# ldap_type The LDAP type ("ActiveDirectory" or "LDAP").
# group_privilege The group privilege ("Administrator", "Operator", "ReadOnly" or "NoAccess").
# group_name The group name of user.
# valid_status_code The expected valid status code.
Update LDAP Configuration with LDAP User Role And Group ${ldap_type}
... ${group_privilege} ${group_name}
Redfish.Logout
Redfish.Login ${LDAP_USER} ${LDAP_USER_PASSWORD}
Redfish.Get ${REDFISH_NW_ETH0_URI} valid_status_codes=[${valid_status_code}]