| George Keishing | 10b654d | 2019-01-11 00:46:41 -0600 | [diff] [blame^] | 1 | # Basic power on test. |
| 2 | -i Test_Remote_Logging_Configuration |
| 3 | -i Check_For_Application_Failures |
| 4 | -i Test_SSH_And_IPMI_Connections |
| 5 | # IPMI test. |
| 6 | -i IPMI_Chassis_Restore_Power_Policy |
| 7 | -i Verify_Host_PowerOn_Via_IPMI |
| 8 | -i Verify_Host_PowerOff_Via_IPMI |
| 9 | -i Test_FRU_Info_At_Power_On |
| 10 | -i Test_IPMI_Warm_Reset |
| 11 | -i Test_CPU_Core_SDR_Info_At_Power_On |
| 12 | -i Test_DIMM_SDR_Info_At_Power_On |
| 13 | -i Test_Turbo_Allowed_SDR_Info |
| 14 | -i Test_Auto_Reboot_SDR_Info |
| 15 | -i Test_TPM_Enable_SDR_Info |
| 16 | -i DIMM_Present_And_Not_Present |
| 17 | -i Set_SOL_Disabled |
| 18 | -i Verify_SOL_During_Boot |
| 19 | -i Set_Valid_SOL_Retry_Count |
| 20 | -i Verify_IPMI_SEL_Version |
| 21 | -i Verify_Empty_SEL |
| 22 | -i Verify_Supported_Cipher_List |
| 23 | -i Verify_Unsupported_Cipher_List |
| 24 | -i Set_Asset_Tag_With_Valid_String_Length |
| 25 | -i Verify_Get_And_Set_Management_Controller_ID_String |
| 26 | -i Test_Management_Controller_ID_String_Status_via_IPMI |
| 27 | -i Verify_Chassis_Identify_via_IPMI |
| 28 | -i Test_Watchdog_Reset_Via_IPMI_And_Verify_Using_REST |
| 29 | -i Test_Ambient_Temperature_Via_IPMI |
| 30 | -i Verify_Get_DCMI_Capabilities |
| 31 | -i Test_Power_Reading_Via_IPMI_With_Host_Booted |
| 32 | -i Retrieve_IP_Address_Via_IPMI_And_Verify_With_BMC_Details |
| 33 | -i Verify_Get_Device_ID |
| 34 | -i Verify_SDR_Info |
| 35 | -i Verify_Supported_Cipher_List |
| 36 | -i Verify_Unsupported_Cipher_List |
| 37 | -i Verify_Supported_Cipher_List_Via_Lan_Print |
| 38 | -i Verify_Supported_Cipher_Via_Getciphers |
| 39 | # Device tree. |
| 40 | -i Check_BMC_Model_Property_Is_Set |
| 41 | -i Check_BMC_Compatible_Property_Is_Set |
| 42 | -i Check_BMC_CPU_Name_Property_Is_Set |
| 43 | -i Check_BMC_CPU_Compatible_Property_Is_Set |
| 44 | -i Check_BMC_GPIO_FSI_Name_Property_Is_Set |
| 45 | -i Check_BMC_GPIO_FSI_Compatible_Property_Is_Set |
| 46 | -i Check_BMC_GPIO_keys_Name_Property_Is_Set |
| 47 | -i Check_BMC_GPIO_keys_Compatible_Property_Is_Set |
| 48 | -i Check_BMC_IIO-HWMON_Name_Property_Is_Set |
| 49 | -i Check_BMC_IIO-HWMON_Compatible_Property_Is_Set |
| 50 | -i Check_BMC_LED_Name_Property_Is_Set |
| 51 | -i Check_BMC_LED_Compatible_Property_Is_Set |
| 52 | # BMC Dump. |
| 53 | -i Verify_User_Initiated_Dump_Size |
| 54 | -i Delete_All_BMC_Dumps_And_Verify |
| 55 | -i Verify_Dump_Persistency_On_Reset |
| 56 | # BMC File Mirroring. |
| 57 | -i Test_BMC_Alt_Side_Mirroring |
| 58 | # BMC boot and device policies. |
| 59 | -i Set_The_Boot_Source_As_Disk_Using_REST_API |
| 60 | -i Set_The_Boot_Source_As_CDROM_Using_Ipmitool |
| 61 | -i Set_The_Boot_Mode_As_Setup_Using_REST_API |
| 62 | -i Set_The_Boot_Mode_As_Safe_Using_Ipmitool |
| 63 | -i Set_Boot_Policy_To_PERMANENT_via_REST |
| 64 | -i Set_Boot_Policy_To_ONETIME_via_IPMITOOL |
| 65 | -i Test_Boot_Order_via_REST |
| 66 | # Hardware Sensors. |
| 67 | -i Verify_System_Ambient_Temperature |
| 68 | -i Verify_Fan_Sensor_Attributes |
| 69 | -i Verify_PCIE_Sensor_Attributes |
| 70 | -i Verify_Rail_Voltage_Sensor_Attributes |
| 71 | -i Verify_VDN_Temperature_Sensors_Attributes |
| 72 | -i Verify_VCS_Temperature_Sensors_Attributes |
| 73 | -i Verify_VDD_Temperature_Sensors_Attributes |
| 74 | -i Verify_VDDR_Temperature_Sensors_Attributes |
| 75 | -i Verify_Power_Redundancy_Using_REST |
| 76 | -i Verify_Power_Redundancy_Using_IPMI |
| 77 | # System Inventory. |
| 78 | -i Verify_System_Inventory_Path |
| 79 | -i Verify_Boxelder_Present_Property |
| 80 | -i Verify_UUID_Entry |
| 81 | -i Verify_Boxelder_MAC_Address_Property_Is_Populated |
| 82 | -i Verify_Chassis_Motherboard_Properties |
| 83 | -i Verify_CPU_Present |
| 84 | -i Verify_DIMM_Present |
| 85 | -i Verify_FRU_Properties |
| 86 | -i Verify_GPU_Properties |
| 87 | -i Verify_Core_Properties |
| 88 | -i Verify_Fan_Properties |
| 89 | -i Verify_Core_Functional_State |
| 90 | -i Verify_DIMM_Functional_State |
| 91 | -i Verify_Fan_Functional_State |
| 92 | -i Verify_CPU_Functional_State |
| 93 | -i Verify_GPU_Functional_State |
| 94 | -i Check_Air_Or_Water_Cooled |
| 95 | -i Verify_Minimal_CPU_Inventory |
| 96 | -i Verify_Minimal_DIMM_Inventory |
| 97 | -i Verify_Minimal_Core_Inventory |
| 98 | -i Verify_Minimal_Fan_Inventory |
| 99 | -i Verify_Minimal_Power_Supply_Inventory |
| 100 | # LED |
| 101 | -i Verify_Rear_Power_LED_With_Host_Power_Off |
| 102 | -i Verify_Rear_Power_LED_With_Host_Power_On |
| 103 | # OCC and reset reload. |
| 104 | -i Verify_OCC_State_After_BMC_Reset |
| 105 | # Power Restory policy. |
| 106 | -i Test_Restore_Policy_ALWAYS_POWER_OFF_With_Host_Off |
| 107 | # REST Test. |
| 108 | -i REST_Login_Session_To_BMC |
| 109 | -i REST_Logout_Session_To_BMC |
| 110 | -i REST_Delete_All_Sessions_And_Expect_Error |
| 111 | -i Multiple_Requests_On_BMC_Using_Single_REST_Session |
| 112 | -i Verify_REST_JSON_Data_On_Success |
| 113 | -i Verify_REST_JSON_Data_On_Failure |
| 114 | -i Verify_REST_Get_Message_JSON_Compliant |
| 115 | -i Verify_REST_Post_Message_JSON_Compliant |
| 116 | -i Verify_REST_Bad_Request_Post_Message_JSON_Compliant |
| 117 | -i REST_Put_Message_JSON_Format_Compliance_Test |
| 118 | -i Check_Response_Codes_415 |
| 119 | -i Get_Response_Codes |
| 120 | -i Get_Data |
| 121 | -i Get_Data_Validation |
| 122 | -i Put_Response_Codes |
| 123 | -i Put_Data_Validation |
| 124 | -i Post_Response_Codes |
| 125 | -i Delete_Response_Codes |
| 126 | -i Verify_All_REST_Objects_Are_Accessible |
| 127 | # Soft boot sensors. |
| 128 | -i Verify_Boot_Sensor_States_At_Host_Booted |
| 129 | # Software manager. |
| 130 | -i Verify_Software_Purpose |
| 131 | -i BMC_Software_Hex_ID |
| 132 | -i BMC_Software_Version |
| 133 | -i BMC_Software_Path |
| 134 | -i BMC_Software_RequestedActivation |
| 135 | -i BMC_Software_Activation_Association |
| 136 | -i Host_Software_Hex_ID |
| 137 | -i Host_Software_Version |
| 138 | -i Host_Software_Path |
| 139 | -i BMC_Software_RequestedActivation |
| 140 | -i Host_Software_Activation_Association |
| 141 | # Time. |
| 142 | -i Get_System_Time |
| 143 | -i Set_Valid_System_Time |
| 144 | -i Set_BMC_Time_With_BMC_And_Manual |
| 145 | -i Set_BMC_Time_With_Both_And_Manual |
| 146 | -i Set_BMC_Time_With_Split_And_Manual |
| 147 | -i Set_Host_Time_With_Host_And_Manual |
| 148 | -i Set_Host_Time_With_Both_And_Manual |
| 149 | -i Set_Host_Time_With_Split_And_Manual |
| 150 | -i Set_Host_Time_With_Split_And_NTP |
| 151 | # Logging and SEL. |
| 152 | -i Verify_eSEL_Using_REST |
| 153 | -i Verify_eSEL_Entries_Using_REST |
| 154 | -i Verify_eSEL_Description_And_EntryID_Using_REST |
| 155 | -i Check_eSEL_AdditionalData |
| 156 | -i Create_Test_Error_And_Verify |
| 157 | -i Test_Error_Persistency_On_Restart |
| 158 | -i Test_Error_Entry_Numbering_Reset_On_Restart |
| 159 | -i Create_Test_Error_And_Verify_Resolved_Field |
| 160 | -i Create_Test_Error_And_Verify_Time_Stamp |
| 161 | -i Create_Test_Error_Log_And_Delete |
| 162 | -i Verify_IPMI_SEL_Delete |
| 163 | -i Verify_IPMI_SEL_Entries |
| 164 | -i Verify_IPMI_SEL_Last_Add_Time |
| 165 | -i Create_Test_Error_Callout_And_Verify_AdditionalData |
| 166 | -i Create_Test_Error_Callout_And_Verify_Associations |
| 167 | -i Create_Test_Error_Callout_And_Verify_LED |
| 168 | -i Set_Resolved_Field_And_Verify_Callout_Deletion |
| 169 | # Network |
| 170 | -i Get_BMC_IPv4_Address_And_Verify |
| 171 | -i Verify_IPv4_Prefix_Length |
| 172 | -i Verify_Gateway_Address |
| 173 | -i Verify_MAC_Address |
| 174 | -i Add_Fourth_Octet_Threshold_IP_And_Verify |
| 175 | -i Add_Third_Octet_Threshold_IP_And_Verify |
| 176 | -i Add_Second_Octet_Threshold_IP_And_Verify |
| 177 | -i Add_First_Octet_Threshold_IP_And_Verify |
| 178 | -i Verify_Hostname |
| 179 | # SNMP |
| 180 | -i Configure_SNMP_Manager_On_BMC_And_Verify |
| 181 | -i Configure_SNMP_Manager_On_BMC_With_Non_Default_Port_And_Verify |
| 182 | -i Configure_SNMP_Manager_On_BMC_With_Out_Of_Range_IP_And_Verify |
| 183 | -i Configure_Multiple_SNMP_Managers_And_Verify |
| 184 | -i Configure_Multiple_SNMP_Managers_With_Non_Default_Port_And_Verify |
| 185 | -i Configure_Multiple_SNMP_Managers_With_Different_Ports_And_Verify |
| 186 | -i Configure_SNMP_Manager_On_BMC_With_Empty_Port_And_Verify |
| 187 | # Fan and energy scale test. |
| 188 | -i Escale_Base_Test_Inactive_Monitoring |
| 189 | -i Escale_Base_Test_Active_Monitoring |
| 190 | -i Escale_Power_Setting_Via_REST_And_Verify |
| 191 | -i Escale_Power_Setting_Via_IPMI_And_Verify |
| 192 | -i Escale_Activation_Test_Via_REST |
| 193 | -i Escale_Dectivation_Test_Via_REST |
| 194 | -i Check_Number_Of_Fans_With_Power_On |
| 195 | -i Check_Number_Of_Fan_Monitors_With_Power_On |
| 196 | -i Check_Fan_Speed |
| 197 | # Certificate |
| 198 | -i Test_Server_Certificate_Install_With_Valid_Certificate_And_Valid_Private_Key |
| 199 | -i Test_Server_Certificate_Install_With_Empty_Certificate_And_Valid_Private_Key |
| 200 | -i Test_Server_Certificate_Install_With_Valid_Certificate_And_Empty_Private_Key |
| 201 | -i Test_Server_Certificate_Install_With_Empty_Certificate_And_Empty_Private_Key |
| 202 | -i Test_Client_Certificate_Install_With_Valid_Certificate_And_Valid_Private_Key |
| 203 | -i Test_Client_Certificate_Install_With_Empty_Certificate_And_Valid_Private_Key |
| 204 | -i Test_Client_Certificate_Install_With_Valid_Certificate_And_Empty_Private_Key |
| 205 | -i Test_Client_Certificate_Install_With_Empty_Certificate_And_Empty_Private_Key |
| 206 | -i Test_Delete_Server_Certificate |
| 207 | -i Test_Delete_Client_Certificate |