lib/ipmi_utils.py

#!/usr/bin/env python

r"""
Provide useful ipmi functions.
"""

import re
import gen_print as gp
import gen_misc as gm
import gen_robot_keyword as grk
import gen_robot_utils as gru
import bmc_ssh_utils as bsu
import var_funcs as vf
import tempfile
gru.my_import_resource("ipmi_client.robot")
from robot.libraries.BuiltIn import BuiltIn


def get_sol_info():
    r"""
    Get all SOL info and return it as a dictionary.

    Example use:

    Robot code:
    ${sol_info}=  get_sol_info
    Rpvars  sol_info

    Output:
    sol_info:
      sol_info[Info]:                                SOL parameter 'Payload Channel (7)' not supported - defaulting to 0x0e
      sol_info[Character Send Threshold]:            1
      sol_info[Force Authentication]:                true
      sol_info[Privilege Level]:                     USER
      sol_info[Set in progress]:                     set-complete
      sol_info[Retry Interval (ms)]:                 100
      sol_info[Non-Volatile Bit Rate (kbps)]:        IPMI-Over-Serial-Setting
      sol_info[Character Accumulate Level (ms)]:     100
      sol_info[Enabled]:                             true
      sol_info[Volatile Bit Rate (kbps)]:            IPMI-Over-Serial-Setting
      sol_info[Payload Channel]:                     14 (0x0e)
      sol_info[Payload Port]:                        623
      sol_info[Force Encryption]:                    true
      sol_info[Retry Count]:                         7
    """

    status, ret_values = grk.run_key_u("Run IPMI Standard Command  sol info")

    # Create temp file path.
    temp = tempfile.NamedTemporaryFile()
    temp_file_path = temp.name

    # Write sol info to temp file path.
    text_file = open(temp_file_path, "w")
    text_file.write(ret_values)
    text_file.close()

    # Use my_parm_file to interpret data.
    sol_info = gm.my_parm_file(temp_file_path)

    return sol_info


def set_sol_setting(setting_name, setting_value):
    r"""
    Set SOL setting with given value.

    # Description of argument(s):
    # setting_name    SOL setting which needs to be set (e.g. "retry-count").
    # setting_value   Value which needs to be set (e.g. "7").
    """

    status, ret_values = grk.run_key_u("Run IPMI Standard Command  sol set " +
                                       setting_name + " " + setting_value)

    return status


def get_lan_print_dict():
    r"""
    Get IPMI 'lan print' output and return it as a dictionary.

    Here is an example of the IPMI lan print output:

    Set in Progress         : Set Complete
    Auth Type Support       : MD5
    Auth Type Enable        : Callback : MD5
                            : User     : MD5
                            : Operator : MD5
                            : Admin    : MD5
                            : OEM      : MD5
    IP Address Source       : Static Address
    IP Address              : x.x.x.x
    Subnet Mask             : x.x.x.x
    MAC Address             : xx:xx:xx:xx:xx:xx
    Default Gateway IP      : x.x.x.x
    802.1q VLAN ID          : Disabled
    Cipher Suite Priv Max   : Not Available
    Bad Password Threshold  : Not Available

    Given that data, this function will return the following dictionary.

    lan_print_dict:
      [Set in Progress]:                              Set Complete
      [Auth Type Support]:                            MD5
      [Auth Type Enable]:
        [Callback]:                                   MD5
        [User]:                                       MD5
        [Operator]:                                   MD5
        [Admin]:                                      MD5
        [OEM]:                                        MD5
      [IP Address Source]:                            Static Address
      [IP Address]:                                   x.x.x.x
      [Subnet Mask]:                                  x.x.x.x
      [MAC Address]:                                  xx:xx:xx:xx:xx:xx
      [Default Gateway IP]:                           x.x.x.x
      [802.1q VLAN ID]:                               Disabled
      [Cipher Suite Priv Max]:                        Not Available
      [Bad Password Threshold]:                       Not Available

    """

    IPMI_INBAND_CMD = BuiltIn().get_variable_value("${IPMI_INBAND_CMD}")

    # Notice in the example of data above that 'Auth Type Enable' needs some
    # special processing.  We essentially want to isolate its data and remove
    # the 'Auth Type Enable' string so that key_value_outbuf_to_dict can
    # process it as a sub-dictionary.
    cmd_buf = IPMI_INBAND_CMD + " lan print | grep -E '^(Auth Type Enable)" +\
        "?[ ]+: ' | sed -re 's/^(Auth Type Enable)?[ ]+: //g'"
    stdout1, stderr, rc = bsu.os_execute_command(cmd_buf)

    # Now get the remainder of the data and exclude the lines with no field
    # names (i.e. the 'Auth Type Enable' sub-fields).
    cmd_buf = IPMI_INBAND_CMD + " lan print | grep -E -v '^[ ]+: '"
    stdout2, stderr, rc = bsu.os_execute_command(cmd_buf)

    # Make auth_type_enable_dict sub-dictionary...
    auth_type_enable_dict = vf.key_value_outbuf_to_dict(stdout1, to_lower=0,
                                                        underscores=0)

    # Create the lan_print_dict...
    lan_print_dict = vf.key_value_outbuf_to_dict(stdout2, to_lower=0,
                                                 underscores=0)
    # Re-assign 'Auth Type Enable' to contain the auth_type_enable_dict.
    lan_print_dict['Auth Type Enable'] = auth_type_enable_dict

    return lan_print_dict


def get_ipmi_power_reading(strip_watts=1):
    r"""
    Get IPMI power reading data and return it as a dictionary.

    The data is obtained by issuing the IPMI "power reading" command.  An
    example is shown below:

    Instantaneous power reading:                   234 Watts
    Minimum during sampling period:                234 Watts
    Maximum during sampling period:                234 Watts
    Average power reading over sample period:      234 Watts
    IPMI timestamp:                           Thu Jan  1 00:00:00 1970
    Sampling period:                          00000000 Seconds.
    Power reading state is:                   deactivated

    For the data shown above, the following dictionary will be returned.

    result:
      [instantaneous_power_reading]:              238 Watts
      [minimum_during_sampling_period]:           238 Watts
      [maximum_during_sampling_period]:           238 Watts
      [average_power_reading_over_sample_period]: 238 Watts
      [ipmi_timestamp]:                           Thu Jan  1 00:00:00 1970
      [sampling_period]:                          00000000 Seconds.
      [power_reading_state_is]:                   deactivated

    Description of argument(s):
    strip_watts  Strip all dictionary values of the trailing " Watts"
                 substring.
    """

    status, ret_values = \
        grk.run_key_u("Run IPMI Standard Command  dcmi power reading")
    result = vf.key_value_outbuf_to_dict(ret_values)

    if strip_watts:
        result.update((k, re.sub(' Watts$', '', v)) for k, v in result.items())

    return result


def get_mc_info():
    r"""
    Get IPMI mc info data and return it as a dictionary.

    The data is obtained by issuing the IPMI "mc info" command.  An
    example is shown below:

    Device ID                 : 0
    Device Revision           : 0
    Firmware Revision         : 2.01
    IPMI Version              : 2.0
    Manufacturer ID           : 42817
    Manufacturer Name         : Unknown (0xA741)
    Product ID                : 16975 (0x424f)
    Product Name              : Unknown (0x424F)
    Device Available          : yes
    Provides Device SDRs      : yes
    Additional Device Support :
        Sensor Device
        SEL Device
        FRU Inventory Device
        Chassis Device
    Aux Firmware Rev Info     :
        0x00
        0x00
        0x00
        0x00

    For the data shown above, the following dictionary will be returned.
    mc_info:
      [device_id]:                       0
      [device_revision]:                 0
      [firmware_revision]:               2.01
      [ipmi_version]:                    2.0
      [manufacturer_id]:                 42817
      [manufacturer_name]:               Unknown (0xA741)
      [product_id]:                      16975 (0x424f)
      [product_name]:                    Unknown (0x424F)
      [device_available]:                yes
      [provides_device_sdrs]:            yes
      [additional_device_support]:
        [additional_device_support][0]:  Sensor Device
        [additional_device_support][1]:  SEL Device
        [additional_device_support][2]:  FRU Inventory Device
        [additional_device_support][3]:  Chassis Device
      [aux_firmware_rev_info]:
        [aux_firmware_rev_info][0]:      0x00
        [aux_firmware_rev_info][1]:      0x00
        [aux_firmware_rev_info][2]:      0x00
        [aux_firmware_rev_info][3]:      0x00
    """

    status, ret_values = \
        grk.run_key_u("Run IPMI Standard Command  mc info")
    result = vf.key_value_outbuf_to_dict(ret_values, process_indent=1)

    return result


def get_sdr_info():
    r"""
    Get IPMI sdr info data and return it as a dictionary.

    The data is obtained by issuing the IPMI "sdr info" command.  An
    example is shown below:

    SDR Version                         : 0x51
    Record Count                        : 216
    Free Space                          : unspecified
    Most recent Addition                :
    Most recent Erase                   :
    SDR overflow                        : no
    SDR Repository Update Support       : unspecified
    Delete SDR supported                : no
    Partial Add SDR supported           : no
    Reserve SDR repository supported    : no
    SDR Repository Alloc info supported : no

    For the data shown above, the following dictionary will be returned.
    mc_info:

      [sdr_version]:                         0x51
      [record_Count]:                        216
      [free_space]:                          unspecified
      [most_recent_addition]:
      [most_recent_erase]:
      [sdr_overflow]:                        no
      [sdr_repository_update_support]:       unspecified
      [delete_sdr_supported]:                no
      [partial_add_sdr_supported]:           no
      [reserve_sdr_repository_supported]:    no
      [sdr_repository_alloc_info_supported]: no
    """

    status, ret_values = \
        grk.run_key_u("Run IPMI Standard Command  sdr info")
    result = vf.key_value_outbuf_to_dict(ret_values, process_indent=1)

    return result


def get_aux_version(version_id):
    r"""
    Get IPMI Aux version info data and return it.

    Description of argument(s):
    version_id    The data is obtained by from BMC /etc/os-release
                  (e.g. "xxx-v2.1-438-g0030304-r3-gfea8585").

    In the prior example, the 3rd field is "438" is the commit version and
    the 5th field is "r3" and value "3" is the release version.

    Aux version return from this function 4380003.
    """

    # Commit version.
    count = re.findall("-(\d{1,4})-", version_id)

    # Release version.
    release = re.findall("-r(\d{1,4})", version_id)
    if release:
        aux_version = count[0] + "{0:0>4}".format(release[0])
    else:
        aux_version = count[0] + "0000"

    return aux_version


def get_fru_info():
    r"""
    Get fru info and return it as a list of dictionaries.

    The data is obtained by issuing the IPMI "fru print -N 50" command.  An
    example is shown below:

    FRU Device Description : Builtin FRU Device (ID 0)
     Device not present (Unspecified error)

    FRU Device Description : cpu0 (ID 1)
     Board Mfg Date        : Sun Dec 31 18:00:00 1995
     Board Mfg             : <Manufacturer Name>
     Board Product         : PROCESSOR MODULE
     Board Serial          : YA1934315964
     Board Part Number     : 02CY209

    FRU Device Description : cpu1 (ID 2)
     Board Mfg Date        : Sun Dec 31 18:00:00 1995
     Board Mfg             : <Manufacturer Name>
     Board Product         : PROCESSOR MODULE
     Board Serial          : YA1934315965
     Board Part Number     : 02CY209

    For the data shown above, the following list of dictionaries will be
    returned.

    fru_obj:
      fru_obj[0]:
        [fru_device_description]:  Builtin FRU Device (ID 0)
        [state]:                   Device not present (Unspecified error)
      fru_obj[1]:
        [fru_device_description]:  cpu0 (ID 1)
        [board_mfg_date]:          Sun Dec 31 18:00:00 1995
        [board_mfg]:               <Manufacturer Name>
        [board_product]:           PROCESSOR MODULE
        [board_serial]:            YA1934315964
        [board_part_number]:       02CY209
      fru_obj[2]:
        [fru_device_description]:  cpu1 (ID 2)
        [board_mfg_date]:          Sun Dec 31 18:00:00 1995
        [board_mfg]:               <Manufacturer Name>
        [board_product]:           PROCESSOR MODULE
        [board_serial]:            YA1934315965
        [board_part_number]:       02CY209
    """

    status, ret_values = \
        grk.run_key_u("Run IPMI Standard Command  fru print -N 50")

    # Manipulate the "Device not present" line to create a "state" key.
    ret_values = re.sub("Device not present", "state : Device not present",
                        ret_values)

    return [vf.key_value_outbuf_to_dict(x) for x in re.split("\n\n",
            ret_values)]


def get_component_fru_info(component='cpu',
                           fru_objs=None):
    r"""
    Get fru info for the given component and return it as a list of
    dictionaries.

    This function calls upon get_fru_info and then filters out the unwanted
    entries.  See get_fru_info's prolog for a layout of the data.

    Description of argument(s):
    component  The component (e.g. "cpu", "dimm", etc.).
    fru_objs   A fru_objs list such as the one returned by get_fru_info.  If
               this is None, then this function will call get_fru_info to
               obtain such a list.  Supplying this argument may improve
               performance if this function is to be called multiple times.
    """

    if fru_objs is None:
        fru_objs = get_fru_info()
    return\
        [x for x in fru_objs
         if re.match(component + '([0-9]+)? ', x['fru_device_description'])]