blob: 17c22898589e3f9652221d3901758970f4a94a69 [file] [log] [blame]
Marissa Garza9f3d3aa2019-11-06 15:02:44 -06001*** Settings ***
2
George Keishing26912622019-11-13 12:35:06 -06003Documentation Test Suite for Supported Fan Modules.
Marissa Garza9f3d3aa2019-11-06 15:02:44 -06004
5Resource ../../lib/rest_client.robot
6Resource ../../lib/bmc_redfish_resource.robot
7Resource ../../lib/bmc_redfish_utils.robot
8Resource ../../lib/openbmc_ffdc.robot
9Resource ../../lib/resource.robot
10Resource ../../lib/boot_utils.robot
11Library ../../lib/gen_robot_valid.py
12Library ../../lib/gen_robot_keyword.py
13
14Suite Setup Suite Setup Execution
15Suite Teardown Suite Teardown Execution
16Test Setup Printn
17Test Teardown Test Teardown Execution
18
19
20*** Variables ***
21
22@{VALID_MODE_VALUES} DEFAULT CUSTOM HEAVY_IO MAX_BASE_FAN_FLOOR
23
24
25*** Test Cases ***
26
27Verify Current Fan Thermal Mode
28 [Documentation] Check current thermal fan mode is a valid mode value.
29 [Tags] Verify_Current_Fan_Thermal_Mode
30
31 # Example:
32 # /xyz/openbmc_project/control/thermal/0
33 #
34 # Response code:200, Content: {
35 # "data": {
36 # "Current": "DEFAULT",
37 # "Supported": [
38 # "DEFAULT",
39 # "CUSTOM",
40 # "HEAVY_IO",
41 # "MAX_BASE_FAN_FLOOR"
42 # },
43 # },
44 # "message": "200 OK",
45 # "status": "ok"
46 # }
47
48 ${current}= Read Attribute ${THERMAL_CONTROL_URI} Current
49 Rprint Vars current
50
51 Valid Value current valid_values=${VALID_MODE_VALUES}
52
53
54Verify Supported Fan Thermal Modes Available
55 [Documentation] Check supported fan thermal modes are valid mode values.
56 [Tags] Verify_Supported_Fan_Thermal_Modes_Available
57
58 ${supported}= Read Attribute ${THERMAL_CONTROL_URI} Supported
59 Rprint Vars supported
60
61 Valid List supported valid_values=${VALID_MODE_VALUES}
62
63
64Verify Supported Fan Thermal Modes Switch At Standby
65 [Documentation] Check that supported modes are set successfully at standby.
66 [Tags] Verify_Supported_Fan_Thermal_Modes_Switch_At_Standby
67 [Template] Set and Verify Thermal Mode Switches
68
69 # pre_req_state thermal_mode_type
70 Off DEFAULT
71 Off CUSTOM
72 Off HEAVY_IO
73 Off MAX_BASE_FAN_FLOOR
74
75
76Verify Supported Fan Thermal Modes Switch At Runtime
77 [Documentation] Check that supported modes are set successfully at runtime.
78 [Tags] Verify_Supported_Fan_Thermal_Modes_Switch_At_Runtime
79 [Template] Set and Verify Thermal Mode Switches
80
81 # pre_req_state thermal_mode
82 On DEFAULT
83 On CUSTOM
84 On HEAVY_IO
85 On MAX_BASE_FAN_FLOOR
86
87
88Verify Supported Fan Thermal Mode Remains Set After IPL
89 [Documentation] Check that supported modes remain set at runtime.
90 [Tags] Verify_Supported_Fan_Thermal_Mode_Remains_Set_After_IPL
91 [Template] Set and Verify Thermal Mode After IPL
92
93 # pre_req_state thermal_mode_type
94 Off DEFAULT
95 Off CUSTOM
96 Off HEAVY_IO
97 Off MAX_BASE_FAN_FLOOR
98
99
100*** Keywords ***
101
102Set and Verify Thermal Mode Switches
103 [Documentation] Verify the thermal mode switches successfully at standby or runtime.
104 [Arguments] ${pre_req_state} ${thermal_mode}
105
106 # Description of Arguments(s):
107 # thermal_mode Read the supported thermal mode (e.g. "CUSTOM")
108 # pre_req_state Set the state of the host to Standby or Runtime (e.g. "Running")
109
110 Run Key U Redfish Power ${pre_req_state} \ stack_mode=skip \ quiet=1
111 Redfish.Login
112
113 ${mode}= Redfish.Put ${THERMAL_CONTROL_URI}/attr/Current body={"data": "${thermal_mode}"}
114
115 ${current}= Read Attribute ${THERMAL_CONTROL_URI} Current
116 Should Be Equal As Strings ${thermal_mode} ${current}
117 ... msg=The thermal mode does not match the current fan mode.
118 Rprint Vars current
119
120
121Set and Verify Thermal Mode After IPL
122 [Documentation] Verify the thermal mode remains set at runtime.
123 [Arguments] ${pre_req_state} ${thermal_mode}
124
125 Set and Verify Thermal Mode Switches ${pre_req_state} ${thermal_mode}
126
127 Run Key U Redfish Power On \ stack_mode=normal \ quiet=1
128 Redfish.Login
129
130 ${current}= Read Attribute ${THERMAL_CONTROL_URI} Current
131 Should Be Equal As Strings ${thermal_mode} ${current}
132 ... msg=The current thermal fan mode switched successfully.
133 Rprint Vars current
134
135
136Suite Teardown Execution
137 [Documentation] Do the post suite teardown.
138
139 Redfish.Logout
140
141
142Suite Setup Execution
143 [Documentation] Do test case setup tasks.
144
145 Printn
146 Redfish.Login
147
148
149Test Teardown Execution
150 [Documentation] Do the post test teardown.
151
152 FFDC On Test Case Fail