blob: 55f97288da049d046741b938ba2ff8968a177700 [file] [log] [blame]
Rahul Maheshwari71525ad2019-08-01 05:54:06 -05001*** Settings ***
2
3Documentation Module to test IPMI asset tag functionality.
4Resource ../lib/ipmi_client.robot
5Resource ../lib/openbmc_ffdc.robot
Tony Lee3fdd31e2020-02-15 11:21:40 +08006Variables ../data/ipmi_raw_cmd_table.py
Tony Lee18c6f9a2020-02-18 17:00:20 +08007Variables ../data/ipmi_variable.py
8Library ../lib/bmc_network_utils.py
9Library ../lib/ipmi_utils.py
Rahul Maheshwari71525ad2019-08-01 05:54:06 -050010
11Test Teardown FFDC On Test Case Fail
12
13*** Test Cases ***
14
15Verify Get DCMI Capabilities
16 [Documentation] Verify get DCMI capabilities command output.
17 [Tags] Verify_Get_DCMI_Capabilities
18 ${cmd_output}= Run IPMI Standard Command dcmi discover
19
20 @{supported_capabilities}= Create List
21 # Supported DCMI capabilities:
22 ... Mandatory platform capabilties
23 ... Optional platform capabilties
24 ... Power management available
25 ... Managebility access capabilties
26 ... In-band KCS channel available
27 # Mandatory platform attributes:
28 ... 200 SEL entries
29 ... SEL automatic rollover is enabled
30 # Optional Platform Attributes:
31 ... Slave address of device: 0h (8bits)(Satellite/External controller)
32 ... Channel number is 0h (Primary BMC)
33 ... Device revision is 0
34 # Manageability Access Attributes:
35 ... Primary LAN channel number: 1 is available
36 ... Secondary LAN channel is not available for OOB
37 ... No serial channel is available
38
Rahul Maheshwari3a1d9912020-02-25 03:13:14 -060039 FOR ${capability} IN @{supported_capabilities}
40 Should Contain ${cmd_output} ${capability} ignore_case=True
41 ... msg=Supported DCMI capabilities not present.
42 END
Tony Lee3fdd31e2020-02-15 11:21:40 +080043
44
45Test Get Self Test Results via IPMI Raw Command
46 [Documentation] Get self test results via IPMI raw command and verify the output.
47 [Tags] Test_Get_Self_Test_Results_via_IPMI
48
49 ${resp}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Self_Test_Results']['Get'][0]}
50
51 # 55h = No error. All Self Tests Passed.
52 # 56h = Self Test function not implemented in this controller.
53 Should Contain Any ${resp} 55 00 56 00
54
55
56Test Get Device GUID Via IPMI Raw Command
57 [Documentation] Get device GUID via IPMI raw command and verify it using Redfish.
58 [Tags] Test_Get_Device_GUID_via_IPMI_and_Verify_via_Redfish
59 [Teardown] Run Keywords Redfish.Logout AND FFDC On Test Case Fail
60 # Get GUIDS via IPMI.
61 # This should match the /redfish/v1/Managers/bmc's UUID data.
62 ${guids}= Run IPMI Standard Command raw ${IPMI_RAW_CMD['Device GUID']['Get'][0]}
63 # Reverse the order and remove space delims.
64 ${guids}= Split String ${guids}
65 Reverse List ${guids}
66 ${guids}= Evaluate "".join(${guids})
67
68 Redfish.Login
69 ${uuid}= Redfish.Get Attribute /redfish/v1/Managers/bmc UUID
70 ${uuid}= Remove String ${uuid} -
71
72 Rprint Vars guids uuid
73 Valid Value uuid ['${guids}']
Tony Lee18c6f9a2020-02-18 17:00:20 +080074
75
76Verify Get Channel Info via IPMI
77 [Documentation] Verify get channel info via IPMI.
78 [Tags] Verify_Get_Channel_Info_via_IPMI
79
80 # Get channel info via ipmi command "ipmitool channel info [channel number]".
Tony Lee87c9cb92020-03-04 14:47:09 +080081 # Verify channel info with files "channel_access_volatile.json", "channel_access_nv.json"
82 # and "channel_config.json" in BMC.
Tony Lee18c6f9a2020-02-18 17:00:20 +080083
84 # Example output from 'Get Channel Info':
85 # channel_info:
86 # [channel_0x2_info]:
87 # [channel_medium_type]: 802.3 LAN
88 # [channel_protocol_type]: IPMB-1.0
89 # [session_support]: multi-session
90 # [active_session_count]: 0
91 # [protocol_vendor_id]: 7154
Tony Lee87c9cb92020-03-04 14:47:09 +080092 # [volatile(active)_settings]:
93 # [alerting]: enabled
94 # [per-message_auth]: enabled
95 # [user_level_auth]: enabled
96 # [access_mode]: always available
97 # [Non-Volatile Settings]:
98 # [alerting]: enabled
99 # [per-message_auth]: enabled
100 # [user_level_auth]: enabled
101 # [access_mode]: always available
Tony Lee18c6f9a2020-02-18 17:00:20 +0800102
103 ${channel_info_ipmi}= Get Channel Info ${CHANNEL_NUMBER}
104 ${active_channel_config}= Get Active Channel Config
Tony Lee87c9cb92020-03-04 14:47:09 +0800105 ${channel_volatile_data_config}= Get Channel Access Config /run/ipmi/channel_access_volatile.json
106 ${channel_nv_data_config}= Get Channel Access Config /var/lib/ipmi/channel_access_nv.json
107
108 Rprint Vars channel_info_ipmi active_channel_config channel_volatile_data_config channel_nv_data_config
Tony Lee18c6f9a2020-02-18 17:00:20 +0800109
110 Valid Value medium_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_medium_type']}']
111 ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['medium_type']}']
112
113 Valid Value protocol_type_ipmi_conf_map['${channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['channel_protocol_type']}']
114 ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['protocol_type']}']
115
116 Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['session_support']
117 ... ['${active_channel_config['${CHANNEL_NUMBER}']['channel_info']['session_supported']}']
118
119 Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['active_session_count']
120 ... ['${active_channel_config['${CHANNEL_NUMBER}']['active_sessions']}']
121 # IPMI Spec: The IPMI Enterprise Number is: 7154 (decimal)
122 Valid Value channel_info_ipmi['channel_0x${CHANNEL_NUMBER}_info']['protocol_vendor_id'] ['7154']
123
Tony Lee87c9cb92020-03-04 14:47:09 +0800124 # Verify volatile(active)_settings
125 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['alerting']}']
126 ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}']
Tony Lee18c6f9a2020-02-18 17:00:20 +0800127
Tony Lee87c9cb92020-03-04 14:47:09 +0800128 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['per-message_auth']}']
129 ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}']
Tony Lee18c6f9a2020-02-18 17:00:20 +0800130
Tony Lee87c9cb92020-03-04 14:47:09 +0800131 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['user_level_auth']}']
132 ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}']
Tony Lee18c6f9a2020-02-18 17:00:20 +0800133
Tony Lee87c9cb92020-03-04 14:47:09 +0800134 Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['volatile(active)_settings']['access_mode']}']
135 ... ['${channel_volatile_data_config['${CHANNEL_NUMBER}']['access_mode']}']
136
137 # Verify Non-Volatile Settings
138 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['alerting']}']
139 ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['alerting_disabled']}']
140
141 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['per-message_auth']}']
142 ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['per_msg_auth_disabled']}']
143
144 Valid Value disabled_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['user_level_auth']}']
145 ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['user_auth_disabled']}']
146
147 Valid Value access_mode_ipmi_conf_map['${channel_info_ipmi['non-volatile_settings']['access_mode']}']
148 ... ['${channel_nv_data_config['${CHANNEL_NUMBER}']['access_mode']}']
Tony Lee0754c5f2020-03-13 19:38:24 +0800149
150
151Test Get Channel Authentication Capabilities via IPMI
152 [Documentation] Test get channel authentication capabilities via IPMI.
153 [Tags] Test_Get_Channel_Authentication_Capabilities_via_IPMI
154
155 ${channel_auth_cap}= Get Channel Auth Capabilities ${CHANNEL_NUMBER}
156 Rprint Vars channel_auth_cap
157
158 Valid Value channel_auth_cap['channel_number'] ['${CHANNEL_NUMBER}']
159 Valid Value channel_auth_cap['kg_status'] ['default (all zeroes)']
160 Valid Value channel_auth_cap['per_message_authentication'] ['enabled']
161 Valid Value channel_auth_cap['user_level_authentication'] ['enabled']
162 Valid Value channel_auth_cap['non-null_user_names_exist'] ['yes']
163 Valid Value channel_auth_cap['null_user_names_exist'] ['no']
164 Valid Value channel_auth_cap['anonymous_login_enabled'] ['no']
165 Valid Value channel_auth_cap['channel_supports_ipmi_v1.5'] ['no']
166 Valid Value channel_auth_cap['channel_supports_ipmi_v2.0'] ['yes']
Tony Lee2d071822020-02-19 16:37:58 +0800167
168
169Verify Set Session Privilege Level via IPMI Raw Command
170 [Documentation] Set session privilege with given privilege level and verify the response with
171 ... expected level.
172 [Tags] Verify_Set_Session_Privilege_Level_via_IPMI_Raw_Command
173 [Template] Set Session Privilege Level And Verify
174
175 # privilege_level expected_level
176 0x00 04
177 0x02 02
178 0x03 03
179 0x04 04
180
181
182*** Keywords ***
183
184Set Session Privilege Level And Verify
185 [Documentation] Set session privilege with given privilege level and verify the response with
186 ... expected level.
187 [Arguments] ${privilege_level} ${expected_level}
188 # Description of argument(s):
189 # privilege_level Requested Privilege Level.
190 # expected_level New Privilege Level (or present level if ‘return present privilege level’ was selected).
191
192 ${resp}= Run IPMI Standard Command
193 ... raw 0x06 0x3b ${privilege_level}
194 Should Contain ${resp} ${expected_level}