blob: 776b981b7fb5abea6b4114c49a7c05713973c8f1 [file] [log] [blame]
Daniel Gonzalez173afd02018-04-27 16:42:28 -05001*** Settings ***
2Documentation Verify the port recovery by simulating its disconnection.
3
4# Test Parameters:
5
6# OS_HOST The OS host name or IP Address.
7# OS_USERNAME The OS login userid (usually root).
8# OS_PASSWORD The OS login password.
9# DEVICE_HOST The network device hostname or IP where the ports will
10# be shutdown.
11# DEVICE_USERNAME The network device username.
12# DEVICE_PASSWORD The network device password.
13# PORT_NUMBER The switch port where the server is connected (e.g.
14# "1", "2", etc).
15# NET_INTERFACE The network interface name that will be tested (e.g.
16# "enP5s1f0", "eth0").
17
18Library ../lib/bmc_ssh_utils.py
Sandhya Somashekar839a0c22019-01-31 05:05:43 -060019Resource ../lib/resource.robot
Daniel Gonzalez173afd02018-04-27 16:42:28 -050020Resource ../syslib/utils_os.robot
21
22Suite Setup Test Setup Execution
23
24*** Variables ***
25
26${PORT_NUMBER} ${EMPTY}
27
28*** Test Cases ***
29
30Verify Network Interface Recovery
31 [Documentation] Test the recovery of the network interface that has been
32 ... shutdown from the switch port.
33 [Tags] Verify_Network_Interface_Recovery
34
Michael Walshc108e422019-03-28 12:27:18 -050035 Printn
Daniel Gonzalez173afd02018-04-27 16:42:28 -050036 Set Switch Port State DOWN
37 Set Switch Port State UP
38
39*** Keywords ***
40
41Set Switch Port State
42 [Documentation] Disable the port connected to the server.
43 [Arguments] ${port_number}=${PORT_NUMBER} ${state}=${EMPTY}
44
45 # Description of argument(s):
46 # port_number The switch port where the server is connected (e.g.
47 # "1", "2", etc).
48 # state The state to be set in the network interface ("UP" or
49 # "DOWN").
50
51 Device Write enable
52 Device Write configure terminal
53 Device Write interface port ${PORT_NUMBER}
54 Run Keyword If '${state}' == 'DOWN'
55 ... Device Write shutdown
56 ... ELSE
57 ... Device Write no shutdown
58 Wait Until Keyword Succeeds 30 sec 5 sec
59 ... Check Network Interface State ${state}
60
61Check Network Interface State
62 [Documentation] Check the status of the network interface.
63 [Arguments] ${NET_INTERFACE}=${NET_INTERFACE} ${state}=${EMPTY}
64
65 # Description of argument(s):
66 # NET_INTERFACE The network interface name that will be tested (e.g.
67 # "enP5s1f0", "eth0").
68 # state The network interface expected state ("UP" or "DOWN").
69
70 ${stdout} ${stderr} ${rc}= OS Execute Command
71 ... ip link | grep "${NET_INTERFACE}" | cut -d " " -f9
72 Should Contain ${stdout} ${state} msg=State not found as expected.
73
74Test Setup Execution
75 [Documentation] Do suite setup tasks.
76
77 Should Not Be Empty ${PORT_NUMBER}
78 Should Not Be Empty ${NET_INTERFACE}