redfish/extended/test_websocket.robot

*** Settings ***

Documentation  Websocket functionality test.

# Test Parameters:
# OPENBMC_HOST       The BMC host name or IP address.
# OPENBMC_USERNAME   The username for the BMC login.
# OPENBMC_PASSWORD   The password for OPENBMC_USERNAME.
# OS_HOST            The OS host name or IP address.
# OS_USERNAME        The username for the OS login.
# OS_PASSWORD        The password for OS_USERNAME.

Resource             ../../lib/esel_utils.robot
Resource             ../../lib/bmc_redfish_resource.robot
Resource             ../../lib/logging_utils.robot
Resource             ../../lib/dump_utils.robot
Resource             ../../lib/os_utilities.robot
Library              ../../lib/gen_cmd.py
Library              OperatingSystem


Suite Setup          Suite Setup Execution
Suite Teardown       Suite Teardown Execution
Test Teardown        Test Teardown Execution


*** Variables ***

${monitor_pgm}          websocket_monitor.py
${monitor_file}         websocket_monitor_out.txt
${esel_received}        eSEL received over websocket interface
${dump_received}        Dump notification received over websocket interface
${min_number_chars}     22
${monitor_cmd}          ${monitor_pgm} ${OPENBMC_HOST} --openbmc_username ${OPENBMC_USERNAME}


*** Test Cases ***


Test BMC Websocket ESEL Interface
    [Documentation]  Verify eSELs are reported over the websocket interface.
    [Tags]  Test_BMC_Websocket_ESEL_Interface

    # Check that the ipmitool is available. That tool is used to create an eSEL.
    Tool Exist  ipmitool

    # Spawn the websocket monitor program and then generate an eSEL.
    # The monitor should asynchronously receive the eSEL through the
    # websocket interface and report this fact to standard output.

    Start Websocket Monitor  logging

    ${initial_esel_count}=  Get Number Of Event Logs

    # Generate eSEL (e.g.  typically "CPU 1 core 3 has failed").
    Create eSEL  ${RAW_PREFIX}

    ${current_esel_count}=   Get Number Of Event Logs

    IF  ${initial_esel_count} == ${current_esel_count}
        Fail  msg=System failed to generate eSEL upon request.
    END

    ${line}=  Grep File  ${monitor_file}  ${esel_received}
    # Typical monitor_file contents:
    # --------------- ON_MESSAGE:begin --------------------
    # {"event":"PropertiesChanged","interface":"xyz.openbmc_project.Logging.
    # Entry","path":"/xyz/openbmc_project/logging/entry/5","properties":{"Id":5}}
    # eSEL received over websocket interface.

    ${num_chars}=  Get Length  ${line}
    IF  ${num_chars} < ${min_number_chars}
        Fail  msg=No eSEL notification from websocket_monitor.py.
    END


Test BMC Websocket Dump Interface
    [Documentation]  Verify dumps are reported over the websocket interface.
    [Tags]  Test_BMC_Websocket_Dump_Interface

    Redfish Delete All BMC Dumps
    Start Websocket Monitor  dump
    ${dump_id}=  Create User Initiated BMC Dump Via Redfish
    Check Existence Of BMC Dump File  ${dump_id}

    # Check that the monitor received notification of the dump.
    ${line}=  Grep File  ${monitor_file}  ${dump_received}
    # Typical monitor_file contents:
    # --------------- ON_MESSAGE:begin --------------------
    # {"event":"PropertiesChanged","interface":"xyz.openbmc_project.Dump.
    # Entry","path":"/xyz/openbmc_project/dump/entry/1","properties":{"Size":157888}}
    # Dump notification received over websocket interface.

    ${num_chars}=  Get Length  ${line}
    IF  ${num_chars} < ${min_number_chars}
        Fail  msg=No dump notification from websocket_monitor.py.
    END


*** Keywords ***


Start Websocket Monitor
    [Documentation]  Fork the monitor to run in the background.
    [Arguments]  ${monitor_type}

    # Description of Argument(s):
    # monitor_type  The type of websocket notifications to monitor,
    #               either "logging" or "dump".

    # Delete the previous output file, if any.
    Remove File  ${monitor_file}

    ${command}=  Catenate  ${monitor_cmd} --openbmc_password ${OPENBMC_PASSWORD}
    ...   --monitor_type ${monitor_type} 1>${monitor_file} 2>&1

    # Start the monitor. Fork so its a parallel task.
    Shell Cmd  ${command}  fork=${1}

    # Allow time for the monitor to initialize.
    Sleep  5s


Find Websocket Monitor
    [Documentation]  Return the process Id(s) of running websocket monitors.

    ${cmd}=  Catenate  ps -ef | grep '${monitor_cmd}'
    ...  | grep -v grep | grep -v bash | cut -c10-14
    ${shell_rc}  ${pid}=  Shell Cmd  ${cmd}
    # There may be more than one pid returned if there is an instance
    # of a monitory_pgm running from a previous run.
    @{pid_list}=  Split String  ${pid}
    RETURN  ${pid_list}


Kill Websocket Monitor
    [Documentation]  Terminate running websocket monitor.

    ${pid_list}=  Find Websocket Monitor
    FOR  ${pid}  IN  @{pid_list}
        Shell Cmd  kill -s SIGTERM ${pid}
    END


Print Websocket Monitor Log
    [Documentation]  Show the contents of the monitor output file.

    ${websocket_monitor_log}=  OperatingSystem.Get File  ${monitor_file}
    Log to Console  websocket_monitor_log:
    Log to Console  ${websocket_monitor_log}


Suite Setup Execution
    [Documentation]  Do the suite setup tasks.

    Run Keyword  Redfish Power On  stack_mode=skip

    Redfish.Login

    Delete All Error Logs
    Kill Websocket Monitor

    # Allow time for Error Logs to be deleted.
    Sleep  5s


Test Teardown Execution
    [Documentation]  Do teardown tasks after a test.

    FFDC On Test Case Fail
    IF  '${TEST_STATUS}' == 'FAIL'  Print Websocket Monitor Log
    Kill Websocket Monitor

    Redfish Delete All BMC Dumps


Suite Teardown Execution
    [Documentation]  Do the post-suite teardown.

    Delete All Error Logs
    Run Keyword and Return Status  Redfish.Logout