blob: 43e693fe4141e854f552d25ff888305311ab0543 [file] [log] [blame]
Prashanth Katti884ee062017-03-16 05:05:03 -05001*** Settings ***
2Documentation This program performs Factory data reset.
3
4Resource ../lib/ipmi_client.robot
5Resource ../lib/utils.robot
6Resource ../lib/connection_client.robot
Steven Sombar217402f2019-02-19 13:16:25 -06007Resource ../lib/serial_connection/serial_console_client.robot
Prashanth Katti884ee062017-03-16 05:05:03 -05008Library OperatingSystem
9
10Suite Setup Validate Setup
11Suite Teardown Close All Connections
12
Matt Fischer6fb70d92023-10-24 19:06:33 -060013Test Tags Factory_Reset
Sweta Potthuri5db43e42017-06-15 05:36:44 -050014
Prashanth Katti884ee062017-03-16 05:05:03 -050015*** Test Cases ***
16
17Verify Factory Reset
18 [Documentation] Factory reset the system and verify if BMC is online.
19 [Tags] Verify_Factory_Reset
20
21 # Factory reset erases user config settings which incldes IP, netmask
22 # gateway and route. Before running this test we are checking all these
23 # settings and checking whether ping works with BMC host.
24 # If factory reset is successful, ping to BMC host should fail as
25 # IP address is erased and comes up with zero_conf.
26
27 Erase All Settings
28 ${status}= Run Keyword And Return Status Ping Host ${OPENBMC_HOST}
29 Should Be Equal ${status} False msg=Factory reset failed.
30
31Revert to Initial Setup And Verify
32 [Documentation] Revert to old setup.
33 [Tags] Revert_to_Initial_Setup_And_Verify
34
35 # This test case restores old settings Viz IP address, netmask, gateway
36 # and route. Restoring is done through serial port console.
37 # If reverting to initial setup is successful, ping to BMC
38 # host should pass.
39
40 Configure Initial Settings
41 Ping Host ${OPENBMC_HOST}
42
43*** Keywords ***
44
45Validate Setup
46 [Documentation] Validate setup.
47
48 Open Connection And Log In
49
50 # Check whether gateway IP is reachable.
51 Ping Host ${GW_IP}
52 Should Not Be Empty ${NET_MASK} msg=Netmask not provided.
53
54 # Check whether serial console IP is reachable and responding
55 # to telnet command.
56 Open Telnet Connection to BMC Serial Console
57
58Erase All Settings
59 [Documentation] Factory reset the system.
60
61 Run Dbus IPMI Raw Command 0x32 0xBA 00 00
62 Run Dbus IPMI Raw Command 0x32 0x66