blob: 725c200eeda52d21d7e783398c49bc7d20cbd3a3 [file] [log] [blame]
George Keishing91e60472017-08-02 01:24:31 -05001# https://github.com/openbmc/openbmc-test-automation/issues/822
2-e Verify_Minimal_Memory_Buffer_Inventory
3-e Verify_Minimal_Main_Planar_Inventory
4-e Verify_Minimal_System_Inventory
Sweta Potthuric6b1b662017-08-31 04:31:01 -05005# NA test case for Witherspoon
George Keishing872ee592017-10-28 08:43:09 -05006-e io_board_Present
7-e io_board_Fault
8# System LED test cases which are NA for Witherspoon system.
9-e Test_Heartbeat_LED_And_Verify_Via_REST
10-e Test_Beep_LED_And_Verify_Via_REST
11-e Test_Identify_LED_And_Verify_Via_REST
Sridevi Ramesh41d70482018-01-12 07:38:29 -060012# NXDMAENG UE error injection is not available in latest p9dd1ffdcv104.xlsm
13-e Verify_Unrecoverable_Callout_Handling_For_NXDMAENG
George Keishing39829742018-05-08 09:31:28 -050014# NA test case with nginx support.
15-e Test_Non_SSL_Connection_To_Port_80
16-e Test_Non_SSL_Connection_To_Port_443
George Keishing7cfd6742018-10-05 08:11:23 -050017# MRW changes required for this to work.
18-e Test_GPU_SDR_Info_At_Power_On
George Keishing2ab97542018-10-30 08:17:38 -050019# Core dump is disabled.
20-e Verify_Core_Dump_Size
Prashanth Kattifc1e0bd2018-11-09 00:36:46 -060021# Skip org code update.
22-e Initiate_Code_Update_BMC
23-e BIOS_Code_Update
24-e Upload_Test
25-e BMC_Code_Update
26-e Host_Code_Update
27-e BMC_Update_Recoverable_Error
28-e Host_Update_Recoverable_Error
29-e BMC_Multi_Code_Update
30-e Host_Multi_Code_Update
Prashanth Kattifc1e0bd2018-11-09 00:36:46 -060031-e Verify_IPMI_Disable_Policy_Post_BMC_Code_Update
32# Others NA tests.
33-e Run_Keyword_Pgm
34# Factory reset must not run in CT.
35-e Factory_Reset
36-e Full_Suite_Regression
37-e AC_Cycles
38-e Network_Nping
39# Multiple runs only needed for stability.
40-e Run_Multiple_Power_Cycle
41-e Run_Multiple_BMC_Reset_Via_REST
42-e Run_Multiple_BMC_Reset_Via_Reboot
43-e General_boot_testing
44-e SLP_Service_Test
45-e Check_Network_Latency
46# TODO: Configure invalid IP address use cases.
47-e Configure_Broadcast_IP
48-e Configure_Multicast_IP
49-e Configure_Loopback_IP
50-e Configure_Network_ID
51# TODO: Invalid gateway address configuration.
52-e Configure_Broadcast_IP_For_Gateway
53-e Configure_Loopback_IP_For_Gateway
54-e Configure_Multicast_IP_For_Gateway
55-e Configure_Network_ID_For_Gateway
56-e Verify_Network_Interface_Recovery
57# Skipping RAS test cases
58-e Host_RAS
Gunnar Millsacc7c562019-08-20 13:12:46 -050059# Skip multi threading test causing XML parser failure.
Prashanth Kattifc1e0bd2018-11-09 00:36:46 -060060-e Stress_BMC_REST_Server
61-e Stress_BMC_SSH_Server
62-e Stress_BMC_IPMI_Server
63# Applicable only for master build.
64-e Verify_eSEL_Description_And_EntryID_Using_REST
65# Needs fix and improvement.
66-e Test_SBE_Side_Switch
George Keishing6ba80702018-12-17 06:13:34 -060067# IPMI disable and enable use cases.
68-e Verify_Disabling_And_Enabling_IPMI_Via_Host
69-e Verify_Disabling_IPMI_Via_OOB_IPMI
70-e Verify_IPMI_Disable_Persistency_After_BMC_Reboot
George Keishing686cacb2019-01-16 01:05:20 -060071# Remote logging
72-e Verify_BMC_Journald_Contains_No_Credential_Data
Sridevi Ramesheadeef02019-01-17 08:56:18 -060073# Non bmcweb certificate.
74-e Certificate_Test