blob: e4f03965a32b55c21c27b658236c112755024047 [file] [log] [blame]
George Keishing76a484a2019-03-20 14:22:32 -05001*** Settings ***
2Documentation Test for HW CI.
3
4Library DateTime
5
6Resource ../../lib/utils.robot
7Resource ../../lib/ipmi_client.robot
8Resource ../../lib/boot_utils.robot
9Resource ../../lib/openbmc_ffdc.robot
10Resource ../../lib/bmc_redfish_resource.robot
11
George Keishing2997a282020-06-16 00:42:08 -050012Test Setup Test Setup Execution
George Keishing76a484a2019-03-20 14:22:32 -050013Test Teardown FFDC On Test Case Fail
14
15*** Variables ***
16
17# Error strings to check from journald.
Jian Zhangc79341b2023-03-10 18:03:52 +080018${ERROR_REGEX} SEGV|core-dump|FAILURE|Failed to start|Found ordering cycle
George Keishing76a484a2019-03-20 14:22:32 -050019${STANDBY_REGEX} Startup finished in
20
George Keishing140351f2022-03-10 08:10:01 -060021${SKIP_ERROR} ${EMPTY}
22
George Keishing76a484a2019-03-20 14:22:32 -050023# 3 minutes standby boot time.
24${startup_time_threshold} 180
25
26*** Test Cases ***
27
28Verify Application Services Running At Standby
29 [Documentation] Check if there are services that have not completed.
30 [Tags] Verify_Application_Services_Running_At_Standby
31
32 # Application services running on the BMC are not tightly coupled.
33 # At standby, there shouldn't be any pending job waiting to complete.
34 # Examples:
35 # Failure o/p:
36 # root@witherspoon:~# systemctl list-jobs --no-pager | cat
37 # JOB UNIT TYPE STATE
38 # 35151 xyz.openbmc_project.ObjectMapper.service start running
39 # 1 jobs listed.
40 #
41 # Success o/p:
42 # root@witherspoon:~# systemctl list-jobs --no-pager | cat
43 # No jobs running.
44
45 Redfish Hard Power Off
46 ${stdout} ${stderr} ${rc}= BMC Execute Command
47 ... systemctl list-jobs --no-pager | cat
48 Should Be Equal As Strings ${stdout} No jobs running.
49
50
51Verify Front And Rear LED At Standby
52 [Documentation] Front and Rear LED should be off at standby.
53 [Tags] Verify_Front_And_Rear_LED_At_Standby
54
55 Redfish Power Off stack_mode=skip quiet=1
56 Verify Identify LED State ${0}
57
58
59Check For Application Failures
60 [Documentation] Parse the journal log and check for failures.
61 [Tags] Check_For_Application_Failures
62
George Keishing140351f2022-03-10 08:10:01 -060063 Check For Regex In Journald ${ERROR_REGEX} error_check=${0} boot=-b filter_string=${SKIP_ERROR}
George Keishing76a484a2019-03-20 14:22:32 -050064
65
66Verify Uptime Average Against Threshold
67 [Documentation] Compare BMC average boot time to a constant threshold.
68 [Tags] Verify_Uptime_Average_Against_Threshold
69
70 Redfish OBMC Reboot (off)
71
72 Wait Until Keyword Succeeds
73 ... 1 min 30 sec Check BMC Uptime Journald
74
75
76Test SSH And IPMI Connections
77 [Documentation] Try SSH and IPMI commands to verify each connection.
78 [Tags] Test_SSH_And_IPMI_Connections
79
80 BMC Execute Command true
81 Run IPMI Standard Command chassis status
82
83
84*** Keywords ***
85
George Keishing2997a282020-06-16 00:42:08 -050086Test Setup Execution
87 [Documentation] Do test case setup tasks.
88
89 Printn
90 Redfish.Login
91
92
George Keishing76a484a2019-03-20 14:22:32 -050093Check BMC Uptime Journald
94 [Documentation] Check BMC journald uptime entry.
95
96 # Example output:
97 # Startup finished in 10.074s (kernel) + 2min 23.506s (userspace) = 2min 33.581s.
98 ${startup_time} ${stderr} ${rc}= BMC Execute Command
99 ... journalctl --no-pager | egrep '${STANDBY_REGEX}' | tail -1
100 Should Not Be Empty ${startup_time}
101
102 # Example time conversion:
103 # Get the "2min 33.581s" string total time taken to reach standby.
104 # Convert time "2min 33.581s" to unit 153.581.
105 ${startup_time}= Convert Time ${startup_time.split("= ",1)[1].strip(".")}
106
107 Should Be True ${startup_time} < ${startup_time_threshold}
108 ... msg=${startup_time} greater than threshold value of ${startup_time_threshold}.