redfish/managers/test_bmc_network_conf.robot

*** Settings ***
Documentation  Network interface configuration and verification
               ...  tests.

Resource       ../../lib/bmc_redfish_resource.robot
Resource       ../../lib/bmc_network_utils.robot
Resource       ../../lib/openbmc_ffdc.robot
Library        ../../lib/bmc_network_utils.py
Library        Collections

Test Setup     Test Setup Execution
Test Teardown  Test Teardown Execution

Force Tags     Network_Conf_Test

*** Variables ***
${test_hostname}           openbmc
${test_ipv4_addr}          10.7.7.7
${test_ipv4_invalid_addr}  0.0.1.a
${test_subnet_mask}        255.255.0.0
${test_gateway}            10.7.7.1
${broadcast_ip}            10.7.7.255
${loopback_ip}             127.0.0.2
${multicast_ip}            224.6.6.6
${out_of_range_ip}         10.7.7.256

# Valid netmask is 4 bytes long and has continuos block of 1s.
# Maximum valid value in each octet is 255 and least value is 0.
# 253 is not valid, as binary value is 11111101.
${invalid_netmask}         255.255.253.0
${alpha_netmask}           ff.ff.ff.ff
# Maximum value of octet in netmask is 255.
${out_of_range_netmask}    255.256.255.0
${more_byte_netmask}       255.255.255.0.0
${less_byte_netmask}       255.255.255
${threshold_netmask}       255.255.255.255
${lowest_netmask}          128.0.0.0

# There will be 4 octets in IP address (e.g. xx.xx.xx.xx)
# but trying to configure xx.xx.xx
${less_octet_ip}           10.3.36

# For the address 10.6.6.6, the 10.6.6.0 portion describes the
# network ID and the 6 describe the host.

${network_id}              10.7.7.0
${hex_ip}                  0xa.0xb.0xc.0xd
${negative_ip}             10.-7.-7.7
${hex_ip}                  0xa.0xb.0xc.0xd
@{static_name_servers}     10.5.5.5
@{null_value}              null
@{empty_dictionary}        {}
@{string_value}            aa.bb.cc.dd

*** Test Cases ***

Get IP Address And Verify
    [Documentation]  Get IP Address And Verify.
    [Tags]  Get_IP_Address_And_Verify

    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Verify IP On BMC  ${network_configuration['Address']}

Get Netmask And Verify
    [Documentation]  Get Netmask And Verify.
    [Tags]  Get_Netmask_And_Verify

    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Verify Netmask On BMC  ${network_configuration['SubnetMask']}

Get Gateway And Verify
    [Documentation]  Get gateway and verify it's existence on the BMC.
    [Tags]  Get_Gateway_And_Verify

    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Verify Gateway On BMC  ${network_configuration['Gateway']}

Get MAC Address And Verify
    [Documentation]  Get MAC address and verify it's existence on the BMC.
    [Tags]  Get_MAC_Address_And_Verify

    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH0_URI}
    ${macaddr}=  Get From Dictionary  ${resp.dict}  MACAddress
    Validate MAC On BMC  ${macaddr}

Verify All Configured IP And Netmask
    [Documentation]  Verify all configured IP and netmask on BMC.
    [Tags]  Verify_All_Configured_IP_And_Netmask

    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Verify IP And Netmask On BMC  ${network_configuration['Address']}
    ...  ${network_configuration['SubnetMask']}

Get Hostname And Verify
    [Documentation]  Get hostname via Redfish and verify.
    [Tags]  Get_Hostname_And_Verify

    ${hostname}=  Redfish_Utils.Get Attribute  ${REDFISH_NW_PROTOCOL_URI}  HostName

    Validate Hostname On BMC  ${hostname}

Configure Hostname And Verify
    [Documentation]  Configure hostname via Redfish and verify.
    [Tags]  Configure_Hostname_And_Verify

    ${hostname}=  Redfish_Utils.Get Attribute  ${REDFISH_NW_PROTOCOL_URI}  HostName

    Configure Hostname  ${test_hostname}
    Validate Hostname On BMC  ${test_hostname}

    # Revert back to initial hostname.
    Configure Hostname  ${hostname}
    Validate Hostname On BMC  ${hostname}

Add Valid IPv4 Address And Verify
    [Documentation]  Add IPv4 Address via Redfish and verify.
    [Tags]  Add_Valid_IPv4_Addres_And_Verify

     Add IP Address  ${test_ipv4_addr}  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  ${test_ipv4_addr}

Add Invalid IPv4 Address And Verify
    [Documentation]  Add Invalid IPv4 Address via Redfish and verify.
    [Tags]  Add_Invalid_IPv4_Addres_And_Verify

    Add IP Address  ${test_ipv4_invalid_addr}  ${test_subnet_mask}
    ...  ${test_gateway}  valid_status_codes=${HTTP_BAD_REQUEST}

Configure Out Of Range IP
    [Documentation]  Configure out-of-range IP address.
    [Tags]  Configure_Out_Of_Range_IP
    [Template]  Add IP Address

    # ip                subnet_mask          gateway          valid_status_codes
    ${out_of_range_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Broadcast IP
    [Documentation]  Configure broadcast IP address.
    [Tags]  Configure_Broadcast_IP
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${broadcast_ip}

    # ip             subnet_mask          gateway          valid_status_codes
    ${broadcast_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Multicast IP
    [Documentation]  Configure multicast IP address.
    [Tags]  Configure_Multicast_IP
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${multicast_ip}

    # ip             subnet_mask          gateway          valid_status_codes
    ${multicast_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Loopback IP
    [Documentation]  Configure loopback IP address.
    [Tags]  Configure_Loopback_IP
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${loopback_ip}

    # ip            subnet_mask          gateway          valid_status_codes
    ${loopback_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Add Valid IPv4 Address And Check Persistency
    [Documentation]  Add IPv4 address and check peristency.
    [Tags]  Add_Valid_IPv4_Addres_And_Check_Persistency

    Add IP Address  ${test_ipv4_addr}  ${test_subnet_mask}  ${test_gateway}

    # Reboot BMC and verify persistency.
    OBMC Reboot (off)
    Redfish.Login
    Verify IP On BMC  ${test_ipv4_addr}
    Delete IP Address  ${test_ipv4_addr}

Add Fourth Octet Threshold IP And Verify
    [Documentation]  Add fourth octet threshold IP and verify.
    [Tags]  Add_Fourth_Octet_Threshold_IP_And_Verify

     Add IP Address  10.7.7.254  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.7.7.254

Add Fourth Octet Lowest IP And Verify
    [Documentation]  Add fourth octet lowest IP and verify.
    [Tags]  Add_Fourth_Octet_Lowest_IP_And_Verify

     Add IP Address  10.7.7.1  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.7.7.1

Add Third Octet Threshold IP And Verify
    [Documentation]  Add third octet threshold IP and verify.
    [Tags]  Add_Third_Octet_Threshold_IP_And_Verify

     Add IP Address  10.7.255.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.7.255.7

Add Third Octet Lowest IP And Verify
    [Documentation]  Add third octet lowest IP and verify.
    [Tags]  Add_Third_Octet_Lowest_IP_And_Verify

     Add IP Address  10.7.0.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.7.0.7

Add Second Octet Threshold IP And Verify
    [Documentation]  Add second octet threshold IP and verify.
    [Tags]  Add_Second_Octet_Threshold_IP_And_Verify

     Add IP Address  10.255.7.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.255.7.7

Add Second Octet Lowest IP And Verify
    [Documentation]  Add second octet lowest IP and verify.
    [Tags]  Add_Second_Octet_Lowest_IP_And_Verify

     Add IP Address  10.0.7.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  10.0.7.7

Add First Octet Threshold IP And Verify
    [Documentation]  Add first octet threshold IP and verify.
    [Tags]  Add_First_Octet_Threshold_IP_And_Verify

     Add IP Address  223.7.7.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  223.7.7.7

Add First Octet Lowest IP And Verify
    [Documentation]  Add first octet lowest IP and verify.
    [Tags]  Add_First_Octet_Lowest_IP_And_Verify

     Add IP Address  1.7.7.7  ${test_subnet_mask}  ${test_gateway}
     Delete IP Address  1.7.7.7

Configure Invalid Netmask
    [Documentation]  Verify error while setting invalid netmask.
    [Tags]  Configure_Invalid_Netmask
    [Template]  Add IP Address

    # ip               subnet_mask         gateway          valid_status_codes
    ${test_ipv4_addr}  ${invalid_netmask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Out Of Range Netmask
    [Documentation]  Verify error while setting out of range netmask.
    [Tags]  Configure_Out_Of_Range_Netmask
    [Template]  Add IP Address

    # ip               subnet_mask              gateway          valid_status_codes
    ${test_ipv4_addr}  ${out_of_range_netmask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Alpha Netmask
    [Documentation]  Verify error while setting alpha netmask.
    [Tags]  Configure_Alpha_Netmask
    [Template]  Add IP Address

    # ip               subnet_mask       gateway          valid_status_codes
    ${test_ipv4_addr}  ${alpha_netmask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure More Byte Netmask
    [Documentation]  Verify error while setting more byte netmask.
    [Tags]  Configure_More_Byte_Netmask
    [Template]  Add IP Address

    # ip               subnet_mask           gateway          valid_status_codes
    ${test_ipv4_addr}  ${more_byte_netmask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Less Byte Netmask
    [Documentation]  Verify error while setting less byte netmask.
    [Tags]  Configure_Less_Byte_Netmask
    [Template]  Add IP Address

    # ip               subnet_mask           gateway          valid_status_codes
    ${test_ipv4_addr}  ${less_byte_netmask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Threshold Netmask And Verify
    [Documentation]  Configure threshold netmask and verify.
    [Tags]  Configure_Threshold_Netmask_And_verify

     Add IP Address  ${test_ipv4_addr}  ${threshold_netmask}  ${test_gateway}
     Delete IP Address  ${test_ipv4_addr}

Configure Lowest Netmask And Verify
    [Documentation]  Configure lowest netmask and verify.
    [Tags]  Configure_Lowest_Netmask_And_verify

     Add IP Address  ${test_ipv4_addr}  ${lowest_netmask}  ${test_gateway}
     Delete IP Address  ${test_ipv4_addr}

Configure Network ID
    [Documentation]  Verify error while configuring network ID.
    [Tags]  Configure_Network_ID
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${network_id}

    # ip           subnet_mask          gateway          valid_status_codes
    ${network_id}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Less Octet IP
    [Documentation]  Verify error while Configuring less octet IP address.
    [Tags]  Configure_Less_Octet_IP
    [Template]  Add IP Address

    # ip              subnet_mask          gateway          valid_status_codes
    ${less_octet_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Empty IP
    [Documentation]  Verify error while Configuring empty IP address.
    [Tags]  Configure_Empty_IP
    [Template]  Add IP Address

    # ip      subnet_mask          gateway          valid_status_codes
    ${EMPTY}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Special Char IP
    [Documentation]  Configure invalid IP address containing special chars.
    [Tags]  Configure_Special_Char_IP
    [Template]  Add IP Address

    # ip          subnet_mask          gateway          valid_status_codes
    @@@.%%.44.11  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Hexadecimal IP
    [Documentation]  Configure invalid IP address containing hex value.
    [Tags]  Configure_Hexadecimal_IP
    [Template]  Add IP Address

    # ip       subnet_mask          gateway          valid_status_codes
    ${hex_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Negative Octet IP
    [Documentation]  Configure invalid IP address containing negative octet.
    [Tags]  Configure_Negative_Octet_IP
    [Template]  Add IP Address

    # ip            subnet_mask          gateway          valid_status_codes
    ${negative_ip}  ${test_subnet_mask}  ${test_gateway}  ${HTTP_BAD_REQUEST}

Configure Incomplete IP For Gateway
    [Documentation]  Configure incomplete IP for gateway and expect an error.
    [Tags]  Configure_Incomplete_IP_For_Gateway
    [Template]  Add IP Address

    # ip               subnet_mask          gateway           valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${less_octet_ip}  ${HTTP_BAD_REQUEST}

Configure Special Char IP For Gateway
    [Documentation]  Configure special char IP for gateway and expect an error.
    [Tags]  Configure_Special_Char_IP_For_Gateway
    [Template]  Add IP Address

    # ip               subnet_mask          gateway       valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  @@@.%%.44.11  ${HTTP_BAD_REQUEST}

Configure Hexadecimal IP For Gateway
    [Documentation]  Configure hexadecimal IP for gateway and expect an error.
    [Tags]  Configure_Hexadecimal_IP_For_Gateway
    [Template]  Add IP Address

    # ip               subnet_mask          gateway    valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${hex_ip}  ${HTTP_BAD_REQUEST}

Get DNS Server And Verify
    [Documentation]  Get DNS server via Redfish and verify.
    [Tags]  Get_DNS_Server_And_Verify

    Verify CLI and Redfish Nameservers

Configure DNS Server And Verify
    [Documentation]  Configure DNS server and verify.
    [Tags]  Configure_DNS_Server_And_Verify
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Configure Static Name Servers  ${static_name_servers}
    Verify CLI and Redfish Nameservers

Delete DNS Server And Verify
    [Documentation]  Delete DNS server and verify.
    [Tags]  Delete_DNS_Server_And_Verify
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Delete Static Name Servers
    Verify CLI and Redfish Nameservers

Configure DNS Server And Check Persistency
    [Documentation]  Configure DNS server and check persistency on reboot.
    [Tags]  Configure_DNS_Server_And_Check_Persistency
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Configure Static Name Servers  ${static_name_servers}
    # Reboot BMC and verify persistency.
    OBMC Reboot (off)
    Verify CLI and Redfish Nameservers

Configure Loopback IP For Gateway
    [Documentation]  Configure loopback IP for gateway and expect an error.
    [Tags]  Configure_Loopback_IP_For_Gateway
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${test_ipv4_addr}

    # ip               subnet_mask          gateway         valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${loopback_ip}  ${HTTP_BAD_REQUEST}

Configure Network ID For Gateway
    [Documentation]  Configure network ID for gateway and expect an error.
    [Tags]  Configure_Network_ID_For_Gateway
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${test_ipv4_addr}

    # ip               subnet_mask          gateway        valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${network_id}  ${HTTP_BAD_REQUEST}

Configure Multicast IP For Gateway
    [Documentation]  Configure multicast IP for gateway and expect an error.
    [Tags]  Configure_Multicast_IP_For_Gateway
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${test_ipv4_addr}

    # ip               subnet_mask          gateway           valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${multicaste_ip}  ${HTTP_BAD_REQUEST}

Configure Broadcast IP For Gateway
    [Documentation]  Configure broadcast IP for gateway and expect an error.
    [Tags]  Configure_Broadcast_IP_For_Gateway
    [Template]  Add IP Address
    [Teardown]  Clear IP Settings On Fail  ${test_ipv4_addr}

    # ip               subnet_mask          gateway          valid_status_codes
    ${test_ipv4_addr}  ${test_subnet_mask}  ${broadcast_ip}  ${HTTP_BAD_REQUEST}

Configure Null Value For DNS Server
    [Documentation]  Configure null value for DNS server and expect an error.
    [Tags]  Configure_Null_Value_For_DNS_Server
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Configure Static Name Servers  ${null_value}  ${HTTP_BAD_REQUEST}

Configure Empty Value For DNS Server
    [Documentation]  Configure empty value for DNS server and expect an error.
    [Tags]  Configure_Empty_Value_For_DNS_Server
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Configure Static Name Servers  ${empty_dictionary}  ${HTTP_BAD_REQUEST}

Configure String Value For DNS Server
    [Documentation]  Configure string value for DNS server and expect an error.
    [Tags]  Configure_String_Value_For_DNS_Server
    [Setup]  DNS Test Setup Execution
    [Teardown]  Run Keywords
    ...  Configure Static Name Servers  AND  Test Teardown Execution

    Configure Static Name Servers  ${string_value}  ${HTTP_BAD_REQUEST}

*** Keywords ***

Test Setup Execution
    [Documentation]  Test setup execution.

    Redfish.Login

    @{network_configurations}=  Get Network Configuration
    Set Test Variable  @{network_configurations}

    # Get BMC IP address and prefix length.
    ${ip_data}=  Get BMC IP Info
    Set Test Variable  ${ip_data}


Get Network Configuration
    [Documentation]  Get network configuration.

    # Sample output:
    #{
    #  "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface",
    #  "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0",
    #  "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface",
    #  "Description": "Management Network Interface",
    #  "IPv4Addresses": [
    #    {
    #      "Address": "169.254.xx.xx",
    #      "AddressOrigin": "IPv4LinkLocal",
    #      "Gateway": "0.0.0.0",
    #      "SubnetMask": "255.255.0.0"
    #    },
    #    {
    #      "Address": "xx.xx.xx.xx",
    #      "AddressOrigin": "Static",
    #      "Gateway": "xx.xx.xx.1",
    #      "SubnetMask": "xx.xx.xx.xx"
    #    }
    #  ],
    #  "Id": "eth0",
    #  "MACAddress": "xx:xx:xx:xx:xx:xx",
    #  "Name": "Manager Ethernet Interface",
    #  "SpeedMbps": 0,
    #  "VLAN": {
    #    "VLANEnable": false,
    #    "VLANId": 0
    #  }

    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH0_URI}
    @{network_configurations}=  Get From Dictionary  ${resp.dict}  IPv4StaticAddresses
    [Return]  @{network_configurations}


Add IP Address
    [Documentation]  Add IP Address To BMC.
    [Arguments]  ${ip}  ${subnet_mask}  ${gateway}
    ...  ${valid_status_codes}=${HTTP_OK}

    # Description of argument(s):
    # ip                  IP address to be added (e.g. "10.7.7.7").
    # subnet_mask         Subnet mask for the IP to be added
    #                     (e.g. "255.255.0.0").
    # gateway             Gateway for the IP to be added (e.g. "10.7.7.1").
    # valid_status_codes  Expected return code from patch operation
    #                     (e.g. "200").  See prolog of rest_request
    #                     method in redfish_plut.py for details.

    ${empty_dict}=  Create Dictionary
    ${ip_data}=  Create Dictionary  Address=${ip}
    ...  SubnetMask=${subnet_mask}  Gateway=${gateway}

    ${patch_list}=  Create List
    ${network_configurations}=  Get Network Configuration
    ${num_entries}=  Get Length  ${network_configurations}

    : FOR  ${INDEX}  IN RANGE  0  ${num_entries}
    \  Append To List  ${patch_list}  ${empty_dict}

    # We need not check for existence of IP on BMC while adding.
    Append To List  ${patch_list}  ${ip_data}
    ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}

    Redfish.patch  ${REDFISH_NW_ETH0_URI}  body=&{data}
    ...  valid_status_codes=[${valid_status_codes}]

    Return From Keyword If  '${valid_status_codes}' != '${HTTP_OK}'

    # Note: Network restart takes around 15-18s after patch request processing.
    Sleep  ${NETWORK_TIMEOUT}s
    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}

    Verify IP On BMC  ${ip}
    Validate Network Config On BMC


Delete IP Address
    [Documentation]  Delete IP Address Of BMC.
    [Arguments]  ${ip}  ${valid_status_codes}=${HTTP_OK}

    # Description of argument(s):
    # ip                  IP address to be deleted (e.g. "10.7.7.7").
    # valid_status_codes  Expected return code from patch operation
    #                     (e.g. "200").  See prolog of rest_request
    #                     method in redfish_plut.py for details.

    ${empty_dict}=  Create Dictionary
    ${patch_list}=  Create List

    @{network_configurations}=  Get Network Configuration
    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Run Keyword If  '${network_configuration['Address']}' == '${ip}'
       ...  Append To List  ${patch_list}  ${null}
       ...  ELSE  Append To List  ${patch_list}  ${empty_dict}

    ${ip_found}=  Run Keyword And Return Status  List Should Contain Value
    ...  ${patch_list}  ${null}  msg=${ip} does not exist on BMC
    Pass Execution If  ${ip_found} == ${False}  ${ip} does not exist on BMC

    # Run patch command only if given IP is found on BMC
    ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}

    Redfish.patch  ${REDFISH_NW_ETH0_URI}  body=&{data}
    ...  valid_status_codes=[${valid_status_codes}]

    # Note: Network restart takes around 15-18s after patch request processing
    Sleep  ${NETWORK_TIMEOUT}s
    Wait For Host To Ping  ${OPENBMC_HOST}  ${NETWORK_TIMEOUT}

    ${delete_status}=  Run Keyword And Return Status  Verify IP On BMC  ${ip}
    Run Keyword If  '${valid_status_codes}' == '${HTTP_OK}'
    ...  Should Be True  ${delete_status} == ${False}
    ...  ELSE  Should Be True  ${delete_status} == ${True}

    Validate Network Config On BMC


Validate Network Config On BMC
    [Documentation]  Check that network info obtained via redfish matches info
    ...              obtained via CLI.

    @{network_configurations}=  Get Network Configuration
    ${ip_data}=  Get BMC IP Info
    : FOR  ${network_configuration}  IN  @{network_configurations}
    \  Should Contain Match  ${ip_data}  ${network_configuration['Address']}/*
    ...  msg=IP address does not exist.


Verify Netmask On BMC
    [Documentation]  Verify netmask on BMC.
    [Arguments]  ${netmask}

    # Description of the argument(s):
    # netmask  netmask value to be verified.

    ${prefix_length}=  Netmask Prefix Length  ${netmask}

    Should Contain Match  ${ip_data}  */${prefix_length}
    ...  msg=Prefix length does not exist.

Verify IP And Netmask On BMC
    [Documentation]  Verify IP and netmask on BMC.
    [Arguments]  ${ip}  ${netmask}

    # Description of the argument(s):
    # ip       IP address to be verified.
    # netmask  netmask value to be verified.

    ${prefix_length}=  Netmask Prefix Length  ${netmask}
    @{ip_data}=  Get BMC IP Info

    ${ip_with_netmask}=  Catenate  ${ip}/${prefix_length}
    Should Contain  ${ip_data}  ${ip_with_netmask}
    ...  msg=IP and netmask pair does not exist.

Validate Hostname On BMC
    [Documentation]  Verify that the hostname read via Redfish is the same as the
    ...  hostname configured on system.
    [Arguments]  ${hostname}

    # Description of argument(s):
    # hostname  A hostname value which is to be compared to the hostname
    #           configured on system.

    ${sys_hostname}=  Get BMC Hostname
    Should Be Equal  ${sys_hostname}  ${hostname}
    ...  ignore_case=True  msg=Hostname does not exist.

Test Teardown Execution
    [Documentation]  Test teardown execution.

    FFDC On Test Case Fail
    Redfish.Logout

Clear IP Settings On Fail
    [Documentation]  Clear IP settings on fail.
    [Arguments]  ${ip}

    # Description of argument(s):
    # ip  IP address to be deleted.

    Run Keyword If  '${TEST STATUS}' == 'FAIL'
    ...  Delete IP Address  ${ip}

    Test Teardown Execution

Verify CLI and Redfish Nameservers
    [Documentation]  Verify that nameservers obtained via Redfish do not
    ...  match those found in /etc/resolv.conf.

    ${redfish_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH0_URI}  StaticNameServers
    ${resolve_conf_nameservers}=  CLI Get Nameservers
    Rqprint Vars  redfish_nameservers  resolve_conf_nameservers

    # Check that the 2 lists are equivalent.
    ${match}=  Evaluate  set($redfish_nameservers) == set($resolve_conf_nameservers)
    Should Be True  ${match}
    ...  The nameservers obtained via Redfish do not match those found in /etc/resolv.conf.


Configure Static Name Servers
    [Documentation]  Configure DNS server on BMC.
    [Arguments]  ${static_name_servers}=${original_nameservers}
     ...  ${valid_status_codes}=${HTTP_OK}

    # Description of the argument(s):
    # static_name_servers  A list of static name server IPs to be
    #                      configured on the BMC.

    Redfish.Patch  ${REDFISH_NW_ETH0_URI}  body={'StaticNameServers': ${static_name_servers}}
    ...  valid_status_codes=[${valid_status_codes}]

    # Check if newly added DNS server is configured on BMC.
    ${cli_nameservers}=  CLI Get Nameservers
    ${cmd_status}=  Run Keyword And Return Status
    ...  List Should Contain Sub List  ${cli_nameservers}  ${static_name_servers}

    Run Keyword If  '${valid_status_codes}' == '${HTTP_OK}'
    ...  Should Be True  ${cmd_status} == ${True}
    ...  ELSE  Should Be True  ${cmd_status} == ${False}

Delete Static Name Servers
    [Documentation]  Delete static name servers.

    Configure Static Name Servers  @{EMPTY}

    # Check if all name servers deleted on BMC.
    ${nameservers}=  CLI Get Nameservers
    Should Be Empty  ${nameservers}

DNS Test Setup Execution
    [Documentation]  Do DNS test setup execution.

    Redfish.Login

    ${original_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH0_URI}  StaticNameServers
    Rprint Vars  original_nameservers
    # Set suite variables to trigger restoration during teardown.
    Set Suite Variable  ${original_nameservers}