blob: 3c5592e238de95481be20e74eb3670b53dc19c8f [file] [log] [blame]
Michael Walsh1b0ceb22017-05-31 16:03:01 -05001*** Settings ***
2Resource ../lib/utils.robot
3Resource ../lib/connection_client.robot
4Resource ../lib/boot_utils.robot
George Keishing58e47232018-02-12 10:35:15 -06005Library ../lib/gen_misc.py
George Keishingbf724772018-02-21 08:57:16 -06006Library ../lib/utils.py
Michael Walsh1b0ceb22017-05-31 16:03:01 -05007
8*** Variables ***
9# MAC input from user.
10${MAC_ADDRESS} ${EMPTY}
11
12
13*** Keywords ***
14
Michael Walsh1b0ceb22017-05-31 16:03:01 -050015Check And Reset MAC
16 [Documentation] Update BMC with user input MAC address.
17 [Arguments] ${mac_address}=${MAC_ADDRESS}
18
19 # Description of argument(s):
20 # mac_address The mac address (e.g. 00:01:6c:80:02:28).
21
22 Should Not Be Empty ${mac_address}
23 Open Connection And Log In
Joy Onyerikwu9b668972018-05-22 19:10:43 -050024 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command
25 ... cat /sys/class/net/eth0/address
Michael Walsh1b0ceb22017-05-31 16:03:01 -050026 Run Keyword If '${mac_address.lower()}' != '${bmc_mac_addr.lower()}'
27 ... Set MAC Address
28
Michael Walsh1b0ceb22017-05-31 16:03:01 -050029
Michael Walsh1b0ceb22017-05-31 16:03:01 -050030Set MAC Address
31 [Documentation] Update eth0 with input MAC address.
32 [Arguments] ${mac_address}=${MAC_ADDRESS}
33
34 # Description of argument(s):
35 # mac_address The mac address (e.g. 00:01:6c:80:02:28).
36
37 Write fw_setenv ethaddr ${mac_address}
38 OBMC Reboot (off)
Sunil Md1c4f272017-07-07 09:03:24 -050039
40 # Take SSH session post BMC reboot.
41 Open Connection And Log In
Joy Onyerikwu9b668972018-05-22 19:10:43 -050042 ${bmc_mac_addr} ${stderr} ${rc}= BMC Execute Command
43 ... cat /sys/class/net/eth0/address
Michael Walsh1b0ceb22017-05-31 16:03:01 -050044 Should Be Equal ${bmc_mac_addr} ${mac_address} ignore_case=True
45
Prashanth Kattie79c5402017-06-08 07:40:49 -050046
47Get BMC IP Info
48 [Documentation] Get system IP address and prefix length.
49
Prashanth Kattie79c5402017-06-08 07:40:49 -050050
51 # Get system IP address and prefix length details using "ip addr"
52 # Sample Output of "ip addr":
53 # 1: eth0: <BROADCAST,MULTIAST> mtu 1500 qdisc mq state UP qlen 1000
54 # link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
55 # inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0
56
Joy Onyerikwu9b668972018-05-22 19:10:43 -050057 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
58 ... /sbin/ip addr | grep eth0
Prashanth Kattie79c5402017-06-08 07:40:49 -050059
60 # Get line having IP address details.
61 ${lines}= Get Lines Containing String ${cmd_output} inet
62
63 # List IP address details.
64 @{ip_components}= Split To Lines ${lines}
65
66 @{ip_data}= Create List
67
68 # Get all IP addresses and prefix lengths on system.
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -050069 FOR ${ip_component} IN @{ip_components}
70 @{if_info}= Split String ${ip_component}
71 ${ip_n_prefix}= Get From List ${if_info} 1
72 Append To List ${ip_data} ${ip_n_prefix}
73 END
Prashanth Kattie79c5402017-06-08 07:40:49 -050074
75 [Return] ${ip_data}
76
77Get BMC Route Info
78 [Documentation] Get system route info.
79
Prashanth Kattie79c5402017-06-08 07:40:49 -050080
81 # Sample output of "ip route":
82 # default via xx.xx.xx.x dev eth0
83 # xx.xx.xx.0/23 dev eth0 src xx.xx.xx.xx
84 # xx.xx.xx.0/24 dev eth0 src xx.xx.xx.xx
85
Joy Onyerikwu9b668972018-05-22 19:10:43 -050086 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
87 ... /sbin/ip route
Prashanth Kattie79c5402017-06-08 07:40:49 -050088
89 [Return] ${cmd_output}
90
George Keishing02651f02018-04-11 02:07:16 -050091# TODO: openbmc/openbmc-test-automation#1331
Prashanth Kattie79c5402017-06-08 07:40:49 -050092Get BMC MAC Address
93 [Documentation] Get system MAC address.
94
Prashanth Kattie79c5402017-06-08 07:40:49 -050095
96 # Sample output of "ip addr | grep ether":
97 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
98
Joy Onyerikwu9b668972018-05-22 19:10:43 -050099 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
100 ... /sbin/ip addr | grep ether
Prashanth Kattie79c5402017-06-08 07:40:49 -0500101
Prashanth Katti9819b162017-12-12 05:38:59 -0600102 # Split the line and return MAC address.
103 # Split list data:
104 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
105
106 @{words}= Split String ${cmd_output}
107
108 [Return] ${words[1]}
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500109
George Keishing02651f02018-04-11 02:07:16 -0500110
111Get BMC MAC Address List
112 [Documentation] Get system MAC address
113
114 # Sample output of "ip addr | grep ether":
115 # link/ether xx.xx.xx.xx.xx.xx brd ff:ff:ff:ff:ff:ff
116
Joy Onyerikwu9b668972018-05-22 19:10:43 -0500117 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
118 ... /sbin/ip addr | grep ether
George Keishing02651f02018-04-11 02:07:16 -0500119
120 # Split the line and return MAC address.
121 # Split list data:
122 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
123 # link/ether | xx:xx:xx:xx:xx:xx | brd | ff:ff:ff:ff:ff:ff
124
125 ${mac_list}= Create List
Joy Onyerikwu9b668972018-05-22 19:10:43 -0500126 @{lines}= Split To Lines ${cmd_output}
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500127 FOR ${line} IN @{lines}
128 @{words}= Split String ${line}
129 Append To List ${mac_list} ${words[1]}
130 END
George Keishing02651f02018-04-11 02:07:16 -0500131
132 [Return] ${mac_list}
133
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500134Get BMC Hostname
135 [Documentation] Get BMC hostname.
136
Prashanth Kattic068faa2019-04-16 00:57:22 -0500137 # Sample output of "hostname":
138 # test_hostname
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500139
Prashanth Kattic068faa2019-04-16 00:57:22 -0500140 ${output} ${stderr} ${rc}= BMC Execute Command hostname
Prashanth Katti40fb8ca2017-07-25 06:47:23 -0500141
142 [Return] ${output}
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500143
144Get List Of IP Address Via REST
145 [Documentation] Get list of IP address via REST.
146 [Arguments] @{ip_uri_list}
147
148 # Description of argument(s):
149 # ip_uri_list List of IP objects.
150 # Example:
151 # "data": [
152 # "/xyz/openbmc_project/network/eth0/ipv4/e9767624",
153 # "/xyz/openbmc_project/network/eth0/ipv4/31f4ce8b"
154 # ],
155
156 ${ip_list}= Create List
157
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500158 FOR ${ip_uri} IN @{ip_uri_list}
159 ${ip_addr}= Read Attribute ${ip_uri} Address
160 Append To List ${ip_list} ${ip_addr}
161 END
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500162
163 [Return] @{ip_list}
164
165Delete IP And Object
166 [Documentation] Delete IP and object.
167 [Arguments] ${ip_addr} @{ip_uri_list}
168
169 # Description of argument(s):
170 # ip_addr IP address to be deleted.
171 # ip_uri_list List of IP object URIs.
172
173 # Find IP object having this IP address.
174
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500175 FOR ${ip_uri} IN @{ip_uri_list}
176 ${ip_addr1}= Read Attribute ${ip_uri} Address
177 Run Keyword If '${ip_addr}' == '${ip_addr1}' Exit For Loop
178 END
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500179
180 # If the given IP address is not configured, return.
181 # Otherwise, delete the IP and object.
182
183 Run Keyword And Return If '${ip_addr}' != '${ip_addr1}'
184 ... Pass Execution IP address to be deleted is not configured.
185
186 Run Keyword And Ignore Error OpenBMC Delete Request ${ip_uri}
187
188 # After any modification on network interface, BMC restarts network
Prashanth Katti549c63a2018-07-17 06:13:37 -0500189 # module, wait until it is reachable. Then wait 15 seconds for new
190 # configuration to be updated on BMC.
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500191
Prashanth Katti549c63a2018-07-17 06:13:37 -0500192 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
193 ... ${NETWORK_RETRY_TIME}
194 Sleep 15s
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500195
196 # Verify whether deleted IP address is removed from BMC system.
197
198 ${ip_data}= Get BMC IP Info
Prashanth Katti160faf62017-09-07 01:05:56 -0500199 Should Not Contain Match ${ip_data} ${ip_addr}*
Prashanth Katti90f9ff22017-08-11 06:17:12 -0500200 ... msg=IP address not deleted.
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600201
George Keishing58e47232018-02-12 10:35:15 -0600202Get First Non Pingable IP From Subnet
203 [Documentation] Find first non-pingable IP from the subnet and return it.
204 [Arguments] ${host}=${OPENBMC_HOST}
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600205
206 # Description of argument(s):
George Keishing58e47232018-02-12 10:35:15 -0600207 # host Any valid host name or IP address
208 # (e.g. "machine1" or "9.xx.xx.31").
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600209
George Keishing58e47232018-02-12 10:35:15 -0600210 # Non-pingable IP is unused IP address in the subnet.
211 ${host_name} ${ip_addr}= Get Host Name IP
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600212
213 # Split IP address into network part and host part.
214 # IP address will have 4 octets xx.xx.xx.xx.
215 # Sample output after split:
216 # split_ip [xx.xx.xx, xx]
217
218 ${split_ip}= Split String From Right ${ip_addr} . 1
219 # First element in list is Network part.
220 ${network_part}= Get From List ${split_ip} 0
221
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500222 FOR ${octet4} IN RANGE 1 255
223 ${new_ip}= Catenate ${network_part}.${octet4}
224 ${status}= Run Keyword And Return Status Ping Host ${new_ip}
225 # If IP is non-pingable, return it.
226 Return From Keyword If '${status}' == 'False' ${new_ip}
227 END
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600228
George Keishing58e47232018-02-12 10:35:15 -0600229 Fail msg=No non-pingable IP could be found in subnet ${network_part}.
Prashanth Kattidf2e4fdf2018-02-07 07:04:13 -0600230
George Keishingbf724772018-02-21 08:57:16 -0600231
232Validate MAC On BMC
233 [Documentation] Validate MAC on BMC.
234 [Arguments] ${mac_addr}
235
236 # Description of argument(s):
237 # mac_addr MAC address of the BMC.
238
239 ${system_mac}= Get BMC MAC Address
240
241 ${status}= Compare MAC Address ${system_mac} ${mac_addr}
242 Should Be True ${status}
243 ... msg=MAC address ${system_mac} does not match ${mac_addr}.
244
Daniel Gonzalezbfd8aff2018-03-27 10:20:37 -0600245
246Run Build Net
247 [Documentation] Run build_net to preconfigure the ethernet interfaces.
248
249 OS Execute Command build_net help y y
Gunnar Mills7732c7e2018-08-14 11:54:24 -0500250 # Run pingum to check if the "build_net" was run correctly done.
Daniel Gonzalezbfd8aff2018-03-27 10:20:37 -0600251 ${output} ${stderr} ${rc}= OS Execute Command pingum
Prashanth Katti549c63a2018-07-17 06:13:37 -0500252 Should Contain ${output} All networks ping Ok
Sushil Singhf661a102019-06-04 00:52:48 -0500253
254
255Configure Hostname
256 [Documentation] Configure hostname on BMC via Redfish.
257 [Arguments] ${hostname}
258
259 # Description of argument(s):
260 # hostname A hostname value which is to be configured on BMC.
261
262 ${data}= Create Dictionary HostName=${hostname}
263 Redfish.patch ${REDFISH_NW_PROTOCOL_URI} body=&{data}
George Keishing5041d6d2020-01-14 12:19:06 -0600264 ... valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]
Sushil Singhf661a102019-06-04 00:52:48 -0500265
Naman Navin Hegde53691452019-07-30 00:22:37 -0500266
267Verify IP On BMC
268 [Documentation] Verify IP on BMC.
269 [Arguments] ${ip}
270
271 # Description of argument(s):
272 # ip IP address to be verified (e.g. "10.7.7.7").
273
274 # Get IP address details on BMC using IP command.
275 @{ip_data}= Get BMC IP Info
276 Should Contain Match ${ip_data} ${ip}/*
277 ... msg=IP address does not exist.
278
279
280Verify Gateway On BMC
281 [Documentation] Verify gateway on BMC.
282 [Arguments] ${gateway_ip}=0.0.0.0
283
284 # Description of argument(s):
285 # gateway_ip Gateway IP address.
286
287 ${route_info}= Get BMC Route Info
288
289 # If gateway IP is empty or 0.0.0.0 it will not have route entry.
290
291 Run Keyword If '${gateway_ip}' == '0.0.0.0'
292 ... Pass Execution Gateway IP is "0.0.0.0".
293 ... ELSE
294 ... Should Contain ${route_info} ${gateway_ip}
295 ... msg=Gateway IP address not matching.
296
297
298Get BMC DNS Info
299 [Documentation] Get system DNS info.
300
301
302 # Sample output of "resolv.conf":
303 # ### Generated manually via dbus settings ###
304 # nameserver 8.8.8.8
305
306 ${cmd_output} ${stderr} ${rc}= BMC Execute Command
307 ... cat /etc/resolv.conf
308
309 [Return] ${cmd_output}
310
311
312CLI Get Nameservers
313 [Documentation] Get the nameserver IPs from /etc/resolv.conf and return as a list.
314
315 # Example of /etc/resolv.conf data:
316 # nameserver x.x.x.x
317 # nameserver y.y.y.y
318
319 ${stdout} ${stderr} ${rc}= BMC Execute Command egrep nameserver /etc/resolv.conf | cut -f2- -d ' '
320 ${nameservers}= Split String ${stdout}
321
322 [Return] ${nameservers}
Anvesh Kumar Rayankulaada25db2020-02-19 01:29:17 -0600323
324
325Get Network Configuration
326 [Documentation] Get network configuration.
327 # Sample output:
328 #{
329 # "@odata.context": "/redfish/v1/$metadata#EthernetInterface.EthernetInterface",
330 # "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0",
331 # "@odata.type": "#EthernetInterface.v1_2_0.EthernetInterface",
332 # "Description": "Management Network Interface",
333 # "IPv4Addresses": [
334 # {
335 # "Address": "169.254.xx.xx",
336 # "AddressOrigin": "IPv4LinkLocal",
337 # "Gateway": "0.0.0.0",
338 # "SubnetMask": "255.255.0.0"
339 # },
340 # {
341 # "Address": "xx.xx.xx.xx",
342 # "AddressOrigin": "Static",
343 # "Gateway": "xx.xx.xx.1",
344 # "SubnetMask": "xx.xx.xx.xx"
345 # }
346 # ],
347 # "Id": "eth0",
348 # "MACAddress": "xx:xx:xx:xx:xx:xx",
349 # "Name": "Manager Ethernet Interface",
350 # "SpeedMbps": 0,
351 # "VLAN": {
352 # "VLANEnable": false,
353 # "VLANId": 0
354 # }
355
356 ${resp}= Redfish.Get ${REDFISH_NW_ETH0_URI}
357 @{network_configurations}= Get From Dictionary ${resp.dict} IPv4StaticAddresses
358 [Return] @{network_configurations}
Prashanth Katti3dc8cc32020-03-04 11:11:01 -0600359
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500360
Prashanth Katti3dc8cc32020-03-04 11:11:01 -0600361Add IP Address
362 [Documentation] Add IP Address To BMC.
363 [Arguments] ${ip} ${subnet_mask} ${gateway}
364 ... ${valid_status_codes}=${HTTP_OK}
365
366 # Description of argument(s):
367 # ip IP address to be added (e.g. "10.7.7.7").
368 # subnet_mask Subnet mask for the IP to be added
369 # (e.g. "255.255.0.0").
370 # gateway Gateway for the IP to be added (e.g. "10.7.7.1").
371 # valid_status_codes Expected return code from patch operation
372 # (e.g. "200"). See prolog of rest_request
373 # method in redfish_plus.py for details.
374
375 ${empty_dict}= Create Dictionary
376 ${ip_data}= Create Dictionary Address=${ip}
377 ... SubnetMask=${subnet_mask} Gateway=${gateway}
378
379 ${patch_list}= Create List
380 ${network_configurations}= Get Network Configuration
381 ${num_entries}= Get Length ${network_configurations}
382
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500383 FOR ${INDEX} IN RANGE 0 ${num_entries}
384 Append To List ${patch_list} ${empty_dict}
385 END
Prashanth Katti3dc8cc32020-03-04 11:11:01 -0600386
387 # We need not check for existence of IP on BMC while adding.
388 Append To List ${patch_list} ${ip_data}
389 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list}
390
391 Redfish.patch ${REDFISH_NW_ETH0_URI} body=&{data}
392 ... valid_status_codes=[${valid_status_codes}]
393
394 Return From Keyword If '${valid_status_codes}' != '${HTTP_OK}'
395
396 # Note: Network restart takes around 15-18s after patch request processing.
397 Sleep ${NETWORK_TIMEOUT}s
398 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
399
400 Verify IP On BMC ${ip}
401 Validate Network Config On BMC
402
403
404Delete IP Address
405 [Documentation] Delete IP Address Of BMC.
406 [Arguments] ${ip} ${valid_status_codes}=${HTTP_OK}
407
408 # Description of argument(s):
409 # ip IP address to be deleted (e.g. "10.7.7.7").
410 # valid_status_codes Expected return code from patch operation
411 # (e.g. "200"). See prolog of rest_request
412 # method in redfish_plus.py for details.
413
414 ${empty_dict}= Create Dictionary
415 ${patch_list}= Create List
416
417 @{network_configurations}= Get Network Configuration
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500418 FOR ${network_configuration} IN @{network_configurations}
419 Run Keyword If '${network_configuration['Address']}' == '${ip}'
420 ... Append To List ${patch_list} ${null}
421 ... ELSE Append To List ${patch_list} ${empty_dict}
422 END
Prashanth Katti3dc8cc32020-03-04 11:11:01 -0600423
424 ${ip_found}= Run Keyword And Return Status List Should Contain Value
425 ... ${patch_list} ${null} msg=${ip} does not exist on BMC
426 Pass Execution If ${ip_found} == ${False} ${ip} does not exist on BMC
427
428 # Run patch command only if given IP is found on BMC
429 ${data}= Create Dictionary IPv4StaticAddresses=${patch_list}
430
431 Redfish.patch ${REDFISH_NW_ETH0_URI} body=&{data}
432 ... valid_status_codes=[${valid_status_codes}]
433
434 # Note: Network restart takes around 15-18s after patch request processing
435 Sleep ${NETWORK_TIMEOUT}s
436 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
437
438 ${delete_status}= Run Keyword And Return Status Verify IP On BMC ${ip}
439 Run Keyword If '${valid_status_codes}' == '${HTTP_OK}'
440 ... Should Be True '${delete_status}' == '${False}'
441 ... ELSE Should Be True '${delete_status}' == '${True}'
442
443 Validate Network Config On BMC
444
445
446Validate Network Config On BMC
447 [Documentation] Check that network info obtained via redfish matches info
448 ... obtained via CLI.
449
450 @{network_configurations}= Get Network Configuration
451 ${ip_data}= Get BMC IP Info
Anvesh Kumar Rayankulae354c1c2020-03-09 06:01:13 -0500452 FOR ${network_configuration} IN @{network_configurations}
453 Should Contain Match ${ip_data} ${network_configuration['Address']}/*
454 ... msg=IP address does not exist.
455 END
456
457
458Create VLAN
459 [Documentation] Create a VLAN.
460 [Arguments] ${id} ${interface}=eth0 ${expected_result}=valid
461
462 # Description of argument(s):
463 # id The VLAN ID (e.g. '53').
464 # interface The physical interface for the VLAN(e.g. 'eth0').
465 # expected_result Expected status of VLAN configuration.
466
467 @{data_vlan_id}= Create List ${interface} ${id}
468 ${data}= Create Dictionary data=@{data_vlan_id}
469 ${resp}= OpenBMC Post Request ${vlan_resource} data=${data}
470 ${resp.status_code}= Convert To String ${resp.status_code}
471 ${status}= Run Keyword And Return Status
472 ... Valid Value resp.status_code ["${HTTP_OK}"]
473
474 Run Keyword If '${expected_result}' == 'error'
475 ... Should Be Equal ${status} ${False}
476 ... msg=Configuration of an invalid VLAN ID Failed.
477 ... ELSE
478 ... Should Be Equal ${status} ${True}
479 ... msg=Configuration of a valid VLAN ID Failed.
480
481 Sleep ${NETWORK_TIMEOUT}s
482
483
484Configure Network Settings On VLAN
485 [Documentation] Configure network settings.
486 [Arguments] ${id} ${ip_addr} ${prefix_len} ${gateway_ip}=${gateway}
487 ... ${expected_result}=valid ${interface}=eth0
488
489 # Description of argument(s):
490 # id The VLAN ID (e.g. '53').
491 # ip_addr IP address of VLAN Interface.
492 # prefix_len Prefix length of VLAN Interface.
493 # gateway_ip Gateway IP address of VLAN Interface.
494 # expected_result Expected status of network setting configuration.
495 # interface Physical Interface on which the VLAN is defined.
496
497 @{ip_parm_list}= Create List ${network_resource}
498 ... ${ip_addr} ${prefix_len} ${gateway_ip}
499
500 ${data}= Create Dictionary data=@{ip_parm_list}
501
502 Run Keyword And Ignore Error OpenBMC Post Request
503 ... ${NETWORK_MANAGER}${interface}_${id}/action/IP data=${data}
504
505 # After any modification on network interface, BMC restarts network
506 # module, wait until it is reachable. Then wait 15 seconds for new
507 # configuration to be updated on BMC.
508
509 Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
510 ... ${NETWORK_RETRY_TIME}
511 Sleep ${NETWORK_TIMEOUT}s
512
513 # Verify whether new IP address is populated on BMC system.
514 # It should not allow to configure invalid settings.
515 ${status}= Run Keyword And Return Status
516 ... Verify IP On BMC ${ip_addr}
517
518 Run Keyword If '${expected_result}' == 'error'
519 ... Should Be Equal ${status} ${False}
520 ... msg=Configuration of invalid IP Failed.
521 ... ELSE
522 ... Should Be Equal ${status} ${True}
523 ... msg=Configuration of valid IP Failed.
Prashanth Katti3dc8cc32020-03-04 11:11:01 -0600524